How To Use Putty Glaze Over Bondo

[@purpleslil]

Someone should give you a pat on the back for sharing your experience and knowledge in this field. You seem like a humble person with a passion for teaching and sharing information you've learned in this profession. I enjoy your videos, thanks for sharing.

[@CarAddictGarage]

Thanks for the kind words and for watching the videos.

[@cosmicallyderived]

Amen to that earnest spirit of his; I can count on KZbin to reveal the best in America. Too much trash and synthetic types on mainstream media.

[@Kajuniter]

I'm doing my first body work at 66 years old. Always been intimidated and never tried it. Thanks for the tips and hands on, it definitely will help me feel more confident.

[@miscstuff4789]

I'm in my 50's and self-taught. Was worried about using two-stage paint but have painted 10-12 cars now and was fairly easy from the start. The bodywork and prep is where all the work is done so keep watching videos and don't be afraid to try stuff...

[@cognac8297]

Happy 72nd birthday.

[@Kajuniter]

@@cognac8297, it was 73, but, who's counting..lol

[@RBnPA]

Thanks for the the great video. I see that it was done several years ago but it’s the best I’ve run across! I was especially interested in the glazing putty portion. Your explanation, detail, experience and easy going manor is commendable! I’m 66 yrs old and have zero experience but with folks like yourself I’m able to do a project like this. I see you haven’t posted anything for a while. I’m sure making a video isn’t easy but it’s so valuable to dyi’rs like myself is very much appreciated!

[@CarAddictGarage]

Thank you. I have been busy, but I plan to make more in the future.

[@notadoctor2598]

3M says they're one part putty is good now

[@josephmyers1492]

Great job, great job. Especially the description of the stopping and starting paint points. Good teacher. You have a talent there. Thanks.

[@CarAddictGarage]

This video was a long time ago, but your kind words came at a time when I needed it. Thanks for watching,

[@larryryan2973]

40 yrs in the profession,learned something new,scuff pad to clean paper!!!! always blew clean with air.with u tube you never know if you can trust what your watching but i've watched several of your vids, and you are dead on on procedures and products,great job.newbies follow his advice you won't be sorry

[@JU5TBL4ZE]

I've been doing it for 2 years and just learned that myself. There's always new tricks to learn it seems.

[@sierraridgereaper]

Larry Ryan you can also use a soft wire bristle brush, it works excellent as well for cleaning paper especially when it gets loaded.

[@st-qd8wg]

I ben in show cars ,vintage & classic cars ,motorcycle Restoration of my own currently im car Guy since late 70s and and Owner 17 cars since than work to perfection 👑 KZbin is your best source information for your project or something your not sure about the answers are here bro this where you get helpful tips..😒🤔

[@HallenaQuinzel]

Hello! This was extremely helpful to me. I don't work on cars, but I make costume props. You may not have intended this video for that use, but you've saved me a lot time, money, and frustration!

[@rodskustomsanddetailing8542]

Donnie your videos are very informative and more professional than a guy out there that has auto body videos in a web page and charges 179.00 USD for the VIP access. I went to school for auto body in high school back in the 90's. Now I'm learning to airbrush and Iove your videos. Thanks.

[@spignetti]

I never knew about the glazing....now I do....I always wondered how they went to ultra smooth fiber/bondo to paint...I just could never get there...now I know...thanks man...you're the best...

[@Comeaud1193]

hey im not the best at body work but i can make do, i could never get the bondo completely smooth no matter how much i sanded or what grit i used.now i know about this glazing putty which is awesome. Thank you so much!!!

[@cosmicallyderived]

Donnie Smith I thank you for making this very informative video. You were able to confirm some details for me. Much appreciated.

[@CarAddictGarage]

I am glad you like the video. Thanks for the suggestion and for watching them.

[@andrewpelletier1199]

You mention you are using the 2 part putty. I've got the 907 Glazing & Spot Putty which judging from the directions on container is a SINGLE PART putty. Is this the older style version you used to use? I've got like 12 of these little tubes I bought on Amazon last year (it wasn't clear that the $35 meant I got that many tube!! 😂) so I would like to use this to remove pinhole blemishes on the plastic door handle covers on my 2001 VW TDI beetle. Does this product normally come out of tube so watery and is it still a good solution to my application? Thanks for the effort you put into your videos!

[@iamreallyright]

Great information and demo. Just getting into stage 2 and this is real helpful

[@justint8210]

Very good teacher. Thorough and saves alot of time on my Chevelle

[@CarAddictGarage]

Thanks for watching. You can find more about fillers at www.collisionblast.com/body-fillers/

[@iiirwtiii]

The music at the end was great. The whole video was done well. Nice job.

[@roycehershberger1068]

Thanks for the great videos. Used to do body work but have not for many year, just brushing up on new techniques and products before doing some work on my truck. My how things have changed. thanks

[@408SPLKINGS]

Excellent information & great instructions. You are definitely passionate about auto body & paint. You would make a great teacher. Well detailed, beginners & amatures like me are very greatful to have instructions like this. Body work & paint is very intimidating. Thank you for making it more inviting & less apprehensive. I keep watching & learning.

[@CarAddictGarage]

3 Pointer....Many body filler have zinc, which aids in corrosion protection, but I agree, epoxy is excellent. If I have a lot of metal, if blasted for instance, I would epoxy the bare metal before doing the body work. Great tip, thanks for sharing.

[@samfine9416]

Your vids are brilliant. Practical and very useful!

[@CarAddictGarage]

Thanks for watching.

[@codyhacker]

Just watched your glazing putty video and I really understood what u were trying to get across very easy I understand what your doing and saying u explain things well step for step and don't make things seem harder than they are and I like your saying at the end.

[@mattm6834]

I find that one of the most important things to remember when block sanding filler is to use a coarse grit sandpaper to get the filler flat before going over it with 180-220. If you start out with paper that is too fine you filler with turn out wavy.

[@keithsinclair5611]

Hi Donnie. Just viewed your video on 'putty glaze over bondo'. Fantastic lesson. Many thanks. Keith.

[@CarAddictGarage]

Thanks for watching!

[@davidriekedmin]

Great videos, Donnie! I watch almost all of them.

[@fcporto7777]

Like the way you explain each step. Thanks

[@CarAddictGarage]

Thanks for watching!

[@CarAddictGarage]

Thanks for watching Cheator40

[@jonjones-v5d]

Great info & technique

[@gmeyer6657]

Really good,informative video! Thank you..🎄😄

[@CarAddictGarage]

The red putty is a little different. That is a 1k product. The product I am using in the video is a 2k product. The 2k dries much faster and does not shrink like the 1k..

[@66rjh]

Just learning, thanks for the video.

[@Chevroletman5]

As allways Great information. Thanks for sharing.

[@glen-ozzstarscars8474]

Very good professional advice, thanks for the vids

[@wildestcowboy2668]

Hey mane this dude be just saved my life now i be kno how to fix da bondo

[@CarAddictGarage]

3 Pointer...great tips, thanks for sharing your knowledge with us.

[@philipduncn1495]

Thank you very much for the lesson learning how to paint and do body work on my own wish I could find a good shop to Apprentice through but I'm wondering what type of putty glaze are you guys using it looks really user-friendly

[@johnhotrod3231]

Thank you. Great video.

[@pedrocollazo4437]

Excellent professional video 👌🏽happy thanks giving

[@sanjayra1280]

Can do you a video on alloy wheel repairs?

[@snakeoil24]

Very smooth application

[@CarAddictGarage]

I usually do to rough up the low area. Just don't lose sight of where the low areas are.

[@tomjohnson1727]

Great videos, thanks a lot!

[@NickBeatoMusic]

MAN! ALL YOUR VIDS ARE THE BEST! EXACTLY WHAT I NEED! thanks :)

[@jakflak]

These videos are very helpful, thank you.

[@CarAddictGarage]

Thanks for watching! Here is a video series with the basics you may also find useful... Basic Dent Repair For Beginners - Autobody Basics

[@randyaustin6934]

Thanks for posting Donny

[@osamajad5324]

Hello Donnie .. I want you to made one Video that explain step by step How to paint a car and what is the product you use .... i really like your videos you are perfect

[@CarAddictGarage]

That is a good point, thanks for sharing. And 3 points!

[@lizardking8388]

One very important piece of information you left out that you seem to be ignoring is to stop sanding when you see metal. Metal sands a lot slower that body materials, so if you continue sanding (as I see you are doing in this video), you are creating high spots (metal areas). You should stop sanding and apply more spot putty over the entire area where the metal is exposed to bring up the low spots.

[@danielworden4695]

You don't have to prime the area that's being glazed first ? Thanks for the video Denny looks like your doing it right😉

[@randyschrecengost5533]

No you most definitely do not. Using the glaze is what you do right before primer

[@keyworksales6241]

No because it should be body filled already. This is just sealer for body filler basically

[@CarAddictGarage]

I am glad you like the videos. I am in the process of making the videos with better audio and visual. It'e been a learn as I go process on the video editing. Thanks for watching!

[@stanthrasher4815]

Omg I hate body work. My hats off to you!

[@rellom777]

Man!!! You are too awesome donnie!! Make it look so easy!

[@orlandosantiago1343]

Hey man can you make a video explaining, what to use and why to use certain types of bundle in certain situations, can I apply normal bundle over paint or primer, and in what phase of the body work been done to a car can I use putty.

[@martinmercerjr8615]

I have did body work in long time. My son car , a little paint came off. I try to just use red putty. But it did work good enough. So I have to use body putty. . Could I just use glazed putty. I still have a high spot, after I paint. Did not see it. Can use glaze putty over top of the paint, to make it smooth?

[@wheelie._.b]

Ive been a drywall finisher for 13 years. Might have to get into this. It looks pretty easy. Im surprised to see you sanding with 150 though. If we do that with the putty it'll be scratch central after prime and paint.

[@jonathanyates5198]

He will prime the repair area and block it with 320 or 400 to fill the 150 scratches

[@rider660r]

That's why you don't sand drywall..............that and the mess sanding makes. If you know what you're doing just sponging it is all you have to do.Sponging will also fill in all the fine air bubbles that would get opened up with sanding.

[@sleepe361]

Hi donnie, but my question is..so from the first video repair to this one what if you didn't wanna use glazing putty. would you just have finished the work off by sanding with 150 grit or a little finer up to 180 grit?

[@JU5TBL4ZE]

150 to 220 grit, just so you're not priming over 80 grit. Usually people use glazing putty to fill pinholes and bring the grit up without going through the bondo.

[@tomduncan1970]

Nice lesson.

[@lfiof]

Hi Donnie, great Vids, Tell me , do you sand of the guide cote in the low area's before reaplying a second layer of body filler or glaze putty ? Thank you ans have your self a great day :)

[@CarAddictGarage]

Thanks Lyle!

[@vicshonebethel9934]

That's beautiful i love it

[@MrElPoderozo1]

Hi ! Thanks for the video I think it was very good. I was wondering if you can help me out. I have a Fiberglass Jeep CJ that was previously painted and now I am redoing the paint,I started out sanding the paint with a block and 400 grit and when I finished one side of the Jeep I put on guide coat and notice very small and light dark areas from front to back of the Tub (Fiberglass). My question is; Can I use 3M acrylic putty to fill them up or do I use body filler? and what grit of sand paper should I use to get the putty to grab? If you can answer me It will be appreciated ,Thanks.,

[@stevegriffin2626]

I see this question is 9 years old but for someone having the same problem is spray a sealer primer. There’s a difference between the two. The sealer primer does exactly what it says. It seals it under the primer so you don’t see it. If you prime something and you can see something, your paint coat won’t cover it up. You’ll see it again

[@MrElPoderozo1]

@@stevegriffin2626 Thank you for taking the time to write and help others.👍🏽

[@RBFR01]

can you use glazing putty on a fibreglass bodykit?

[@roadstar499]

my panel is pretty smooth ..I do have a few dime sized areas where it's approx 1/32 of inch low spots ...Will this fill those areas of do I need more body fill. the product I am using is called seal skin polyester glaze...thanks

[@CarAddictGarage]

Most glazes state up to 1/8 inch after sanded so you should be fine to use the glaze. The Seal Skin is by Crest and they don't actually say on their technical data sheet, but on other brands such as Metal Glaze from Evercoat, they say 3 mm - 1/8 inch max after sanded. So you should be good. Here is a link to Metal Glaze TDS www.evercoat.com/images/ePIM/original/TDSMetalGlazeUltra103625English.pdf

[@toddhuddleston9070]

Donnie Smith Hi I've filled all my hail damage on my hood. I've just went sanded the three coats of primer but I still see some shadows of the filler. Can I fill this with something or do I need to sand it back down again? It hardly noticable but I just dont know

[@jonathanyates5198]

@@toddhuddleston9070 filler may be high or just need few more coats of primer

[@Dasquadwith6]

Another good video...Thanks, Donnie! Ben

[@jonnyfowder]

We always finish out with 320's gives the primer nothing to shrink back into !!

[@shaker3512002]

polyester putty should never go over paint or recently applied primer, although the manufactures say you can it will always sink around the outside edge.It may not happen right away but over a few months it's pretty much guaranteed to do so.Also NEVER EVER apply fillers up and down always spread the fillers as the wind would go over the car. Spreading it in a vertical application will make a whole lot more work to get the panel straight

[@USCG.Brennan]

More good info....thanks for posting!!

[@betzjen1]

How long can your sanded body filler and glaze putty job sit before applying primer?

[@CarAddictGarage]

There is to window on your body filler or glaze before priming as long as the filler is sanded.

[@jakefriesenjake]

I think that if you are going to let the panal sit for a long time, like a year, and especially in a non heated garage, you'd probably want to coat the panels in epoxy primer or a good primer sealer (not primer surfacer or high build primer, or filler, or metal or glazing putty). Epoxy and primer sealer are not porous, but the others are.

[@Miguel70Rocha]

Nice work thank for the advise

[@georgenettlesjr1466]

what's a good sealer after blocking polyester primer?

[@HeresTheBrotherhood]

very nice product.

[@georgenettlesjr1466]

Can you tell me what model block are you using?

[@mattmcbee8319]

Hey Donnie. enjoying the vids. self taught body and paint guy working for my dad who has a small car lot that keeps me employed buying auction rides cheaper needing body /rust work. continually learning new things. I always take down to 320 before prime. Not nessasary? Btw...We got the same color works poster behind you. Had to cut off the 2012 calander though ;-) Keep up the vids

[@indrekkpringi]

What's the most sandable sot putty on the market? I have tiny chips from stones hitting the hood, taking off the paint down to the metal. I don't want to send down the whole hood just for 20 pinholes

[@reformedheart]

The "guide coat" idea is good. I am wondering if there are other ways to check if the surface is smooth?

[@kj9219]

Cheap semi gloss rattle can..

[@jonathanyates5198]

Sometimes a straight edge if the surface is acceptable for that method

[@randallsmith1321]

Good job of applying and explaining, but metal spreaders make the job easier.

[@CarAddictGarage]

That is a 3 pointer....thanks for sharing the tip :)

[@johncarraway634]

Hey Donnie, What can I do about weather stripping and seals after a car has been painted? Im scared the seals will stick out like a sore thumb.

[@vinom7692]

Thank you very much for the great video!

[@1uptospeed]

thanks donnie!

[@7caesar719]

Great job!!!!

[@dwayneevans4307]

How long do u let the putty dry before sanding!

[@stardust7930]

Like 15 min

[@robertberry7682]

Can you give a link to this product?

[@ResinManiacs]

Thanks a lot great info.

[@ectovisionparanormal]

worked great

[@joelfuentes3999]

Hi, it’s a good video, just wondering what kind is the putty, where can I buy it? Thanks!

[@roberturen6743]

He won't tell you...real jerk off!

[@JT-qf4it]

Never used putty before. I will from now on though. Trying to feather the filler to the paint has always been a pain.

[@icol86]

Donnie do you have any tips on painting semi trucks. I mainly have problems reaching the very top of them

[@CarAddictGarage]

Scaffolds is what I have used for trucks and other big equipment like that.

[@andyrawn]

March 13, 2021 Helpful Tutorial Thank You Mr Smith! ~ I am inspried to try Putty Glaze on my Project (Integra) ~ WHAT is now the best BRAND? Andy

[@CarAddictGarage]

Hi Andy, I answered your question in this video. I hope you find it useful - kzbin.info/www/bejne/r56Wg5emppl5psU

[@steve1998]

Thanks for video!!

[@anthonyb97]

I plan on using the one part Spot Putty my car got keyed its from driver door to the passenger door makes me mad but it should be an easy fix.

[@kiyaemin4207]

great video great man

[@patbates3835]

I learned that if you can use products from the same company. I worked in the police photo lab and used Kodac products exclusive. Lab techs would help you when you had a problem, only if you used their products.

[@CarAddictGarage]

Yeah, paint companies are the same way...they want you using their products.

[@quilezluis]

Hello Donnie, I just discovered your video and I have not completed viewing them all just yet. I am more interested in learning how to paint motorcycles and eventually some cars if the need should ever arise. My question to you is, do all the rules apply in the same order. Any tips/videos you have would be greatly appreciated.

[@CarAddictGarage]

quilezluis Yes, same rules for motorcycle, just smaller quantities! Thanks for watching.

[@Sms68]

Don, I have a new BRZ and although not noticing everyone I have a spot underneath the Bumper lip I want to touch up. I have the exact paint and only needs a very light coat of filler. Where can I get this and would the be my best bet. Thanks !

[@CarAddictGarage]

Silk Boxing You may be able to use a small amount of flexible parts putty. On bumpers, you will need to apply plastic adhesion promotor to ensure adhesion. You can see the putty at CollisionBlast.com/flex

[@ronniea3655]

What kind is it what's the name

[@marcellinasfigaro3372]

Can this be applied over primer to fix small imperfections?

[@stardust7930]

Yes but you need to sand your prime with 80 grade sandpaper

[@filopride619]

Do I have to sand over the body of my car before applying the filler? I have a big scratch that is deep on only 1/10th of it and the rest is fairly light but I might as well respray the entire area. Also what's the difference between spot and glazing putty?

[@MitchMed]

For body filler yes. Glaze putty is spot putty. Meant for small spots and pinholes.

[@billcurtis6727]

What is the putty glaze used ?

[@brembe1]

how much will you charge to customer for this "touch up" till you paint it??

[@dinotom4789]

I noticed you applied an 80 grit to glazing putty, is that because you spread it on more thickly than one typically would? Also, I wanted to know if I should always block sand once I've gotten to the putty application stage. I noticed some people using a DA to feather out their edges. I presume it's best to block sand only since it's not as dense as bondo?

[@CarAddictGarage]

If you are a beginner I would recommend blocking. A DA can make the surface wavy if you are not careful.

[@dinotom4789]

Thanks, that explains alot.

[@bharattractoarprtsnagaur8321]

Good

[@MichiMind]

What is the exact product being used here?