How To Prep A Fender For Primer

[@CarAddictGarage]

I can use epoxy over all surfacers. However, if you only have a few metal spots, you can use self etch metal on just the metal spots, then use primer surfacer. I don't want to confuse you, but there is also a direct to metal primer. This is a 2K primer surfacer that can be applied over metal and sanded like primer surfacer. Ask you paint supplier for the brand you use if they have one.

[@mattsvintageshop2925]

hi donnie , i need your advice on auto body. i little confused on somethings, 150 to 220 grit is for finishing body filler and glaze putty? 150 to 220 grit for feather edging paint layers? 400 to 600 grit is for waterborne and solvent born base coat? 800 grit and 1200 grit is for clear coat and air brushing ? am i right on all this i just want to make sure i got everything right.

[@jevchance]

Tragic what happened in OK. Thanks for the video Donnie.

[@chrishuston181]

The previous owner of my truck put on rhino liner as the body paint. What grid of sandpaper should I use to prep it for priming?

[@AirbrushingtipsNet]

I plan on getting more bike jobs this summer!

[@mattsvintageshop2925]

how do you know when to stop sanding? doing what you did in the video ?

[@405backroads3]

I automatically liked and subscribed when you gave a shout out to Moore Oklahoma

[@EDHd58]

I've watched several of your videos and they are very informative. I have a question about primer. I have a 42 Ford I plan to paint myself. I am definately not a body man but I work in a cabinet shop doing a fair amount of putty and sand. I feel I have a good grasp of the bondo/sanding part. My question is, do I have to use epoxy primer on the fender or can I use just 2K primer without taking the body all the way down to metal. I want a good paint job that will last for years.

[@jerrykassis5181]

Donny, I have a situation that I have sprayed a 2K primer/surfacer on a bare door with some filler, and after viewing several of your vids, I see that I should have sprayed an 2K epoxy primer first. Can I spray epoxy over this surfacer if I sand it down a bit, or do I have to sand it all the way down to metal and body filler?

[@CarAddictGarage]

You do not need to strip to metal if old paint is in good condition. So if you do not have any metal, I would not use epoxy. Thanks for watching!

[@josephlewis7166]

How long does after paiting should u use a wet sand

[@CarAddictGarage]

I answered this video at kzbin.info/www/bejne/d16biYSAe8Z6ftk

[@tonycervantes4816]

Hi I order I hood .it comes like black primer.my cuestion is I need sand again and put primer or just paint of color I want ..!????

[@amhouseofjazz]

Hi, I am planning to sand my car to bare metal to colour it a new colour, someone told me i must not touch the metal when sanding as the moist in my hand will appear later in the pain and will peel off is this true? I have never done it before first time doing it at home. if you could help would be great thanks

[@MrProbedout]

don't take it to bare metal if you are just changing colors you have to epoxy prime the whole car leave the original paint on

[@decolores9]

Rust repair on the rocker panels, hood, and trunk lid

[@paulfox4134]

where do you get the scuff pads?

[@dl3g3nd45]

can you use selfetching primer on a painted tank?

[@TOXIXIFY]

I plan on painting my 2000 Dodge ram. It's going to be awesome.

[@tunthura9349]

Good day, can I remove the primer which was painted 5 days ago on the plastic quarter panel? It was only 2 coats.

[@CarAddictGarage]

I will have a live video tonight, Friday at 7PM CST and I will try to answer your question. Be sure you clicked the notification bell to be notified when I will be live. Thanks

[@tunthura9349]

@@CarAddictGarage Hi Donny, noted & thanks.

[@cognac8297]

@@CarAddictGarage damn. Scam. Answer. Way harder to say joint me at 8 . Then to say yeah or no and offer a video. Waist.

[@mattm6834]

I plan on painting a L88 hood for my brothers camaro. If that goes well maybe I'll fix some dents on my car.

[@ElMilusosenelgabacho]

Try to fix the rust from the door jams in my 83 Chevy truck

[@Amopower]

Hi Donnie, is there any car painting simulation software out there, that would let you see what your car would look like if a different color? I found one, but its for an ipod. thanks

[@TheEgg185]

Yeah. Photoshop.

[@abytom715]

do we have to scuff it even after sanding?

[@CarAddictGarage]

I do to hit the hard to get areas and edges. If it is sanded good enough you don't have to, but I think it assures the panel is prepped well.

[@fandffabricaNY]

Restoring a 1972 BMW 3.0 CS for the summer

[@profitthebarber84]

gotta 85 4x4 jimmy im doing body work on

[@hafizmahmood5673]

do you have an instagram page?

[@MrDonSnow]

Too much talk that has nothing to do with the topic.

[@Juan-yb8rm]

its prayer for the people a few years back and some advertising for the company, are you always a twat he took less than 2 minutes to get to the point.

[@EDHd58]

It's gonna be some metal, some paint, and some bondo. The fenders are what will have the bondo, the rest of the body is dent free, thank goodness.

[@mattsvintageshop2925]

how do you know when to stop sanding? doing what you did in the video ?