How to Use SIM800L With Arduino

[@terwasegbinde6263]

Your voice is very clear and your teaching is easy-going and appreciated. Please, How can I connect a GSM/GPRS module to a relay output such that the triggering of the relay sends a call in my phone ?

[@ND-qo9mt]

j'ai enfin réussi a faire fonctionner ma sim800 sans bug... Vraiment la meilleur vidéo explicative de la sim800 Bravo et merci !!

[@warrenscorner]

Great video Ahmad! You have the best SIM800 videos on KZbin!

[@AhmadLogs]

Wow, thanks!

[@robosale]

​@@AhmadLogs Can you help me. I need to make the SIM 800 l gsm module receive sms

[@sathyasathya-dm7xj]

“The best “ explanation on KZbin

[@AhmadLogs]

thanks

[@robosale]

i used sim 800 l gsm module. sms came and after some time . SMS has stopped. Please help me to solve this problem module is crashing after sending sms help me code

[@saadelm2955]

All of your posts are very useful.. very nice

[@AhmadLogs]

Glad to hear that

[@shahadathusain3002]

how long does it take to initialize after uploading to Arduino board?

[@pushpasaichellaboyina1656]

Thank you very much I have tried so many your video helped me a lott ❤❤❤

[@MrBobWareham]

Thank you for the video, very informative and helpful Cheers Bob in the UK

[@AhmadLogs]

Glad it was helpful!

[@0124akash]

Sir, why connect GPRS in module? LED blink two time in a second.

[@mostafanfs]

very helpful

[@munip9237]

@ahmadlogs can we used simcard that support 2G,3G and 4G?

[@sukhpalsingh371]

Hi Plz tell me that is sim800l support 4g sim . Because no one company selling 2G sim in my region.

[@AhmadLogs]

only 2g

[@__-em4pi]

Hello good day. I want to ask something about the GSM. Is it possible for this to work with only arduino + gsm + raspberry pi. Because I cant connect the gsm to a computer while it is operating

[@maheshmustapure7668]

Great video My gsm is only Blinking only onec when powered up I tried powering up with Buck converter but didn't helped What to do ?

[@AhmadLogs]

use a battery 3.7v. if you are using buck converter the set the output voltages to 4.2 volts.

[@ahsanulhasib8554]

Will 3.7V battery be enough for power supply?

[@MrGlaiconn]

sim800l não acende a luz LED. Estou trabalhando com 4.1v e 2a. O LED pisca apenas se o chip for considerado ou o LED deve piscar mesmo sem chip??? thanks

[@varunraghuwanshi3177]

Hi I trying sim800l and sim800l v2 both module but they unable to interact with Arduino and i am not getting any response on serial monitor why? I am making a call and it's ringing even my MSG also delivered to sim800l module what may be the problem?

[@habibhussainhabib8971]

I am using both espwifi and 800l which ever will be available it will send data to firebase, i don't know how to connect sim 800l to internet along with wifi

[@alfredkaserekasivanzire9488]

Some people were saying that we need to flash the Sim800L before we use them in Africa because it is programmed on Asian networks. I want to know how to flash them. Is it necessary to flash them? (I am using a Samsung bought in china, I didn't flash it either)

[@mohamedesalem]

very very usefull video thank you so much ❤

[@AhmadLogs]

so nice of you

[@aidahudulova]

Hi, my sim800l not gives at ok messages. İt writes initializing... And ? this question marks 3 time

[@pradeepram9694]

If the sim card is inserted in the GSM how the msg will send to the phone

[@arunachalam.s8680]

I tried this but it didn't work in serial monitor it just shows initialising and nothing after that and my gsm module just keeps blinking can u please help me with this

[@AhmadLogs]

most of the time this is power supply issue. provicde stable 3.7 to 4.4V,

[@TEGHENFRED-wn7pg]

Super la vidéo! Bien expliqué merci

[@mokh3257]

شكرا على المجهود

[@AhmadLogs]

thanks

[@masoudjafarzadeh]

Hi Ahmad Great In previous programs, you used delay (); command . In this program, you used the waitForResponse (); function. Would you explain this difference?

[@AhmadLogs]

Arduino do nothing while in delay time. so, to increase the performance of the program I have used waitForResponse() function without using any delay(). But this function is under development. I am working on it to make the code more efficient.

[@masoudjafarzadeh]

@@AhmadLogs Thank you for your attention and explanation

[@nsk6914]

Can I insert 4g sim I don't have a 2 g sim

[@ARK-Iot-Engineer]

Yes You can use.

[@gauravsinghthakur259]

Serial monitor is stuck to Initializing And even I am not getting any message or call

[@CurioCascade]

Mine also same. Have you found any solution??

[@wolfkind6985]

ممنون احمد جان

[@AhmadLogs]

thanks

[@gloryrealmnetwork2485]

PLEASE HOW CAN I USE 4G FOR SIM 800L

[@meetsoni1487]

How to check the gsm module is 5v tolerant?

[@AhmadLogs]

check the available description while you purchasing it

[@meetsoni1487]

@@AhmadLogs thanks

[@Unicprofits]

How can we program to ardino to auto pickup calls

[@sukhwindersukha158]

Good

[@sheenayu3035]

is there a code just for mq2 sensor?

[@saadelm2955]

Thanks so much for the informations.. Brother...

[@AhmadLogs]

My pleasure

[@hishcodes]

Using Airtel sim. But led keeps on blinking every 1 seconds. Plz help me.

[@ambergupta4757]

I'm also facing the same issue

[@kouameraouphbini1659]

hello I'm working with SIM800L to send sensor data to firebase. The first tests I had to do I managed to connect via GPRS but now I can't connect to the server when I send the data without the sensors I manage to connect but when I connect the sensors to send their data the connection fails.

[@AhmadLogs]

sim800l is not performing well while working with firebase due to it slow internet connection.

[@nehatukuriya4278]

Is sim800l also comes with 5v tolerance? If yes then please tell me that how to check this 5v tolerance property . Please

[@AhmadLogs]

sim800l v2 is a 5v tolerance module. it is a 7 pin module

[@tidesofwaves]

hi we have made a project on arduino based obstacle avoiding robot with crash detection and gps system . we have used sim 800l for the gps tracking n sms alert but it doesn't seem to work in our areaa(we use 2g sim) so what changes can we make to improve this??

[@SuSu-lg8rx]

Hi, i'm from banglore, im also working on arduino based crash detection and gps system, but gps system is not working, i dont have 2g sim either, did u find an alternative for this problem, if u find, please let me know, i too will update if i figure it out

[@tidesofwaves]

@@SuSu-lg8rx yes sure , i will lyk and r u done with the model and codes?

[@TahirKhan-id3dc]

​@@SuSu-lg8rxuse a airtel sim card brother and check

[@TahirKhan-id3dc]

You got a solution are not bro

[@SuSu-lg8rx]

@@tidesofwaves got it, Airtel works.

[@robosale]

Can you help me. I need to make the SIM 800 l gsm module receive sms 6:30

[@muruganjo3931]

In some time my sim800l module is disconnected from the network automatically after it will connected, but the arduino can't work after the connection because of all the AT commands are placed in setup function, so how to I use when the GSM MODULE reconnected to network & work properly with ardunio

[@AhmadLogs]

I am trying to make a video on sim800l programing. I think it will solve your issue. so be patient

[@muruganjo3931]

@@AhmadLogs Thankyou brother

[@rajaduraisangari]

Hi sir, I have two different Sim800L, S2-1065J this type sim800l works very well, And I have another sim800L S2-105HE this type unable to received and send the SMS and serial monitor also nothing, but I will call to sim800L they have ringing, indicating every 3 seconds also fine, how to settle the problem?

[@AhmadLogs]

try AT+CFUN=1,1 to turn on the full functionality of sim800l. then try again with sms

[@rajaduraisangari]

@@AhmadLogs thank you sir, I will try and let you know sir

[@rajaduraisangari]

@@AhmadLogs sir, I try this but cannot, serial monitor showing the quotation marks only

[@rajaduraisangari]

@@AhmadLogs sir, can send me the full code?

[@AhmadLogs]

@@rajaduraisangari unfortunately I dont have the full code

[@ObaidullahKakar]

AOA, Is there is any possibility to reset Arduino through sim800 , In my some project Arduino didn't respond while receiving the commands through sim800 , what will be the issue here . Thanks

[@AhmadLogs]

Let me check

[@ObaidullahKakar]

@@AhmadLogs thanks Bhai Jan

[@sajidd7222]

*Assalamu Alaikum* How to purchase your home appliances product?

[@AhmadLogs]

I never sell any. tell me how can I sell?

[@mohammadkarimi6115]

I tested the circuit several times, everything is fine, but the SMS is not received, it rings and is available, and the SMS is sent.

[@mohammadkarimi6115]

for esp32

[@AhmadLogs]

try following at the end of the setup function. sim800.println("AT+CNMI=1,2,0,0,0");

[@amirtelecom6898]

@@AhmadLogs Hi sir I want to contact you Facebook or WhatsApp Thanks...

[@mohammadkarimi6115]

Thanks, exactly where to add

[@giga-chadsingh8727]

Sir do we need to insert a 2g sim in sim800l module ?

[@AhmadLogs]

yes 2g sim card

[@nomiahmad5268]

Hi, i do have sim800l using zong sim.. for last 4days i was able to send sms through sim800 but after that it stop connecting to network , red led i blinking every second. What could be the problem its been two days i am working on this. Kindly help me..

[@AhmadLogs]

have you registered your gsm module from the PTA? if not then it is possible that the PTA has blocked your gsm module IMEI number

[@nafisashamimrafa4492]

Hello. I get "Error" and "No carrier" on my serial monitor when I pass the "S" and "C" commands. What could be the reason?

[@AhmadLogs]

I think it is the signal issue with sim800l have you attached antenna to you module. if yes then try to replace it.

[@godcanonen2634]

Hi, i have a problem with using any AT commands When i used your code Mr Ahmad in serial monitor i can see only the word "Initializing.." and that's all there is no At commands work Pls help me, what did I do wrong

[@TahirKhan-id3dc]

I also facing this type bro can you get solution for this

[@godcanonen2634]

@@TahirKhan-id3dc in my case, the issue was in the circuit of my system. After I did right connection AT commands worked well

[@benbitrus7486]

How do I configure the sender name?

[@johnmarkmanuel2681]

sir what load does it need? regular or plan

[@AhmadLogs]

it is upto you. you can use both

[@pookoye]

message getting delivered on the phone as , but able to receive SMS, call-out & in what could be the reason?

[@AhmadLogs]

which mobile phone you have used. the sms content are simple text and all the mobile phone support text. so it is strange. have you made any change in the code.

[@pookoye]

@@AhmadLogs does this code works with ESP-12E & nodeMCU?

[@pookoye]

@@AhmadLogs resolved by adding below command under void reply sim800.print ("AT+CSMP=17,167,0,0 ");

[@AhmadLogs]

@@pookoye OK thanks

[@OMARMGE]

thank you .

[@AhmadLogs]

You are welcome!

[@OMARMGE]

I have a question, I need advice. I want to control pump and fan remotely by GSM. What do you use as a controller? stm 32 . adruino nano ? The choice in terms of cost and ease of programming and installation.

[@0124akash]

Sir can i create wifi signal from sim800l module ?

[@AhmadLogs]

no

[@officalxsuit6262]

Hi, Bro how to get 2g sim nowadays because i only have 4g sims

[@houneidasaouli7445]

It's okay to use 4g Sim ,you cannot access the internet only.

[@Teja-gh5co]

IS SIM800l SUPPORT 4G AIRTEL SIM

[@vinodhkumarnetheti6934]

Yes.

[@shubhamubarhande2122]

Does this gsm module work on 4g sim?

[@AhmadLogs]

no

[@shubhamubarhande2122]

@@AhmadLogs then which sim card do we have to use?plz tell.will our regular sim card that we use in mobile phones be okay?

[@officalxsuit6262]

Ahmad Bro I'm Using 3.7V li-ion battery but its LED is still blinking for 7 times and repeat

[@AhmadLogs]

use short length wires from battery to sim800l or try another sim card

[@sumitpandey-tw7rm]

Charge your battery

[@nishantkumar5582]

Sim 800l not working

[@melissahealy1950]

2g is being shut down in many parts of the world that may already be the case where you are

[@BradlyMcGregorHale]

Thank you for the video. Very helpful!

[@nithishtech8922]

Nice bro 🤠

[@AhmadLogs]

🥳

[@nithishtech8922]

@@AhmadLogs bro help me to modify that code to adx 345 plz bro

[@pookoye]

is there any alternative module other than 2G which supports this project?

[@AhmadLogs]

you might use sim7600 4g module but you need to update the code

[@pookoye]

@@AhmadLogs module keeps blinking every second, I have sent AT command but no reply? how to check the module?

[@AhmadLogs]

@@pookoye if the module is keeps blinking then it mean your sim card is not working or else your module is damaged

[@johnmarkmanuel2681]

@@AhmadLogs sir I'm using 4G sim and the module blink fast and then it blink slower is it okay to use?

[@AhmadLogs]

@@johnmarkmanuel2681 just make a call to the module to see if it is working or not

[@chetanc8984]

how to fix no dailtone error?

[@AhmadLogs]

this issue is not related to the sim800l directly. there is some issue with you sim card network provider. so just wait and try again

[@ekdilipkumar]

We should assume this video is out dated for India, because 2G sim is nomore in the market, we have only 4G sim.

[@krutavshah1515]

no brother its working till date (19/12/2023)

[@narutosingh5239]

Except Jio, all service providers will work...

[@krutavshah1515]

@@narutosingh5239 ya actually I had a 4g sim but changed the network settings to 2g using a old device

[@skarailfan5257]

​@@krutavshah1515 you have changed the settings in phone and used that sim in SIM 800L module ?

[@krutavshah1515]

@@skarailfan5257 yes I changed the network preferences to 2g/3g but I used an older phone , I don't know it will work in newer devices or not

[@msravika2078]

serial monitor does not work

[@AhmadLogs]

then check your serial connection, set the correct baud rate from the serial monitro

[@Sekhar_Home]

Where could i got 20k resistor?

[@AhmadLogs]

you need 3.3v logic. you might use other combination of resistors.

[@Sekhar_Home]

@@AhmadLogs anather qsn, i am not getting signal from network as led blink in 1sec. Sim is ok and it is 2g active sim. Attached a 3.9vollt lithium battery. Stil problem there but in at command the arduino shoows the sim number. It means sim reading is ok.

[@AhmadLogs]

@@Sekhar_Home 1. some to the AT commands always works even if your gsm module not connected to the network. 2. try another 2g sim card just for testing. 3. you need to try another sim800l module. it might be damaged.

[@Sekhar_Home]

@@AhmadLogs yes i will check

[@AhmadLogs]

@@Sekhar_Home great

[@shivaraghav2899]

Sir where to purchase 2G sim now

[@AhmadLogs]

50 to 60 percent world is still on 2G

[@alfredkaserekasivanzire9488]

Use the one you have, wether it is 3G or 4G, 2G is also inside.

[@Tx_6969]

Please give me a code to make calls with just a push button

[@AhmadLogs]

use some older version of esp8266 core in arduino ide.

[@Unicprofits]

CAN I contact you bro