How to use the FoodSaver accessory port

Рет қаралды 18,194

All About The Harvest

Күн бұрын

Пікірлер: 35

@AllAboutTheHarvest Жыл бұрын

What FoodSaver questions do you have for me? Are there any other FoodSaver videos you'd like to see me make?

@rdigirl Жыл бұрын

Thank you. I had been in my kitchen for 2 hours trying to figure this out. In minutes, you answered all my questions.

@AllAboutTheHarvest Жыл бұрын

I'm so glad to hear it was helpful!

@exploringcoasttocoast0203 Жыл бұрын

Ours is a modelfm2400 series and the port is lower down on the lid like you mentioned. The problem is it doesn’t screw on as easily as you show. We push and twist and it just doesn’t want to stay in there. Any ideas?

@rhiannonpitts1177 Жыл бұрын

My gamesaver does the same thing. I twist and twist but it doesn't go in. How do I fix this?

@exploringcoasttocoast0203 Жыл бұрын

Our accessory port is green but the plastic at the end of the tube we were using is gray. Apparently the color needs to match. So we pulled apart the? Vacuum thing from the other tube that came with the accessories we bought. It’s the thing that attaches to vacuum a container that looks like a bowl. One end of that tube has what looks like a green clip and the other end is a larger piece that has a small empty chamber with a lid. You pull the lid off the bottom chamber and set it aside. That lid attaches to the lid of the white lid that goes on the jar. Hopefully that makes some sense. We’re able to connect all the parts now but it takes a few tries for every jar. Sometimes when carefully removing the white lid from the jar the metal lid comes off too.

@Dindasayswhynot Жыл бұрын

I loved my old FS accessory hose with the smooth protruding thing and used it all the time with the jar sealer. I hate this one with the tightly wound hose and that green thing. CanNOT figure out how to insert the hose with the split protruding thing that goes into the sealer. I hope your video covers it. Fingers crossed. Disappointed. The demo is using the good one with the smooth projection it looks like. Going to subscribe and hope you've done one with the hose I hate.

@jvallas 2 ай бұрын

Can I leave the tube inserted into the port of the machine all the time, even when sealing bags? (I had a devil of a time getting it all the way into the port.)

@AllAboutTheHarvest 2 ай бұрын

Make sure you are twisting when you insert the hose. You should be able to leave it in because you are going to use a different button when sealing with the accessory port versus the actual sealer on the machine.

@matinee55 Ай бұрын

@@AllAboutTheHarvest YOU CANNOT LEAVE IT PLUGGED IN, again she seems to have a better model then the fm2900 which is a HUGE DESIGN FLAW with IMPOSSIBLE port tip insertion & retraction

@dorode3222 5 ай бұрын

Thank you very much for the video. Is there an adapter to the fresh boxes with the V 2860?

@AllAboutTheHarvest 2 ай бұрын

I think this is what you are looking for: FoodSaver Green oblong suction attachment with hose: amzn.to/4dAPDf2

@AllAboutTheHarvest 2 ай бұрын

I believe this is the one you are asking for: amzn.to/4dAPDf2

@matinee55 Ай бұрын

Wow, I have had 2 units of the fm2900 & inserting & removing the accessory port is NEXT TO IMPOSSIBLE, actually breaking the tip on the first unit but I know this DESIGN FLAW will break again within a very few uses. Yours came out ok you mustg have a better unit

@TjC_3124 Жыл бұрын

Hello! I have an older Foodsaver with the accessory port. I bought a set of Foodsaver Fresh container with the green oblong button in the middle and a small green button that dimples when sealed. However, I can not figure out what kind of attachment I need to use these containers. Can you provide a name or a link please? Kindly, Tammy

@AllAboutTheHarvest 2 ай бұрын

Hi Tammy! I'm sorry I am just seeing this now. Here is the link that you need: amzn.to/4dAPDf2

@marciaspinney4297 Жыл бұрын

I still didn't see how to can the liquid in a mason jar.

@wannellalawson4001 Жыл бұрын

me too

@TMChelle Жыл бұрын

I can’t the port out of the top of the food saver . I’m afraid I’ll break it . Any tips ?

@AllAboutTheHarvest 2 ай бұрын

I'm sorry I missed your comment. I'm not sure what the question is. If you still have the question can you ask again. It appears a word was missing and I'm not sure what you meant to ask.

@TMChelle 2 ай бұрын

@@AllAboutTheHarvest awe thanks for replying! I was missing a word . I figured it out !

@AllAboutTheHarvest 2 ай бұрын

@@TMChelle Glad to hear!

@robertmatheson9542 11 ай бұрын

My Foodsaver that I just bought does not have the port to attach the jar attachment.

@AllAboutTheHarvest 10 ай бұрын

Some FoodSavers have a port and some have the vacuum sealing attachment directly connected to the vacuum sealer. And I believe some FoodSavers have neither. Here is my vacuum sealing playlist that you might find useful depending on your model. (I will be adding more videos to this playlist soon). kzbin.info/aero/PLBitkFTkTcZU5xW5_mvsdn8Tmnb-yR9Ij

@DeDe-dz3hm 3 ай бұрын

I dont see the link for the canisters. Can you pin that link please. I loved this video it was very helpfull

@AllAboutTheHarvest 2 ай бұрын

I couldn't find that canister set anymore, but I did find this ONE that was available: amzn.to/3TKgX31

@DeDe-dz3hm 2 ай бұрын

@@AllAboutTheHarvest thank you so much!🥰

@AllAboutTheHarvest 2 ай бұрын

@@DeDe-dz3hm You are welcome!

@maryannpost8146 Жыл бұрын

Thank you!

@AllAboutTheHarvest Жыл бұрын

You're welcome!

@garintaylor2097 Жыл бұрын

The plug that plugs in to the accessory port is extremely port design and will always break, paired with the fact the plug is not replaceable ( you have to buy the entire plug hose and adapter) it seems it is only designed that way so it provides an income stream to foodsaver/sunbeam.😡