How To Use the Kaloud Lotus™ with a Vortex Bowl

Here's a quick tutorial on using he Kaloud Lotus with the Vortex Bowl. Please note, we also have tutorials on using the Kaloud Lotus with the Harmony Bowl, Alien Bowl, Phunnel Bowl, Large Egyptian Clay Bowl, and the Small Clay Bowl.
What you'll need:
1. A heat source to heat up your charcoal
2. Kaloud Pure (Recommended)
3. Shisha (Hookah Tobacco or Steam Stones)
4. Charcoal (We Recommend Coco Charcoal)
5. The Right Bowl (Must have a diameter of at least 2" or 5 cm)
6. The Kaloud Lotus!
Step One:
Pack your bowl according the instructions in this video. If you're not using a Vortex Bowl, we also have tutorials on using the Kaloud Lotus with the Harmony Bowl, Alien Bowl, Phunnel Bowl, Large Egyptian Clay Bowl, and the Small Clay Bowl.
Step Two:
Pack the Shisha loosely and push most of it to the outer edge so there is less Shisha towards the center and so the bumps on the bottom of the Kaloud Lotus barely touch Shisha
*Please Note Certain Vortex Bowls May Have to Have the Center Spire Sanded Down*
Step Three:
Place the Kaloud Lotus on the Vortex Bowl making sure that at least one of he vents on the bottom of the Kaloud Lotus is over the Shisha
Step Four:
Close the vents to achieve maximum heat and wait a few minutes (it is worth the wait, we promise!
Step Five:
Adjust the vents to adjust heat as necessary.
Enjoy your Kaloud Lotus!!

[@Kalouded]

Hi there, we have a video coming that uses the HJ Alien, but not the mini. We will do our best to get your requests up... ;-) Thanks!

[@Kalouded]

That, good sir, is a complaint we will happily live with! :-)

[@Kalouded]

We believe it's a Sahara Vortex Bowl. :-)

[@Kalouded]

Hi there! First off, thank you so much for purchasing the Kaloud Lotus. Most Vortex bowls are fine, however, some do require the spire to be shaved down. Let us know how it fits when you get it. Thank you!

[@Kalouded]

Are you using it with those bowls only or do you have other bowls? How are you liking it?

[@goldenwingk]

its cool to have, but if your using 3 coco nara coals you end up burning the shisha and it lasts no more then an hour, and if you use 2 coco naras it doesn't generate enough heat. not to mention on how you have to squeeze the coals in when using 3.

[@dimonjustme7044]

Use 2 big and 1 small charcoal. ..

[@datboybobby]

What brand vortex bowl is that

[@ellacasitos8841]

please more videos in spanish

[@fhassan22]

you could google translate the instructions. He aquí un rápido tutorial sobre el uso que Kaloud Lotus con el Vortex Bowl. Tenga en cuenta , también tenemos tutoriales sobre el uso del Kaloud Lotus con el Harmony Tazón , Extraterrestre Bowl, Phunnel Bowl, Gran egipcio de Clay Bowl, y el Pequeño Cuenco de Arcilla . Lo que necesitará : 1. Una fuente de calor para calentar el carbón 2. Kaloud Pure (Recomendado ) 3. Shisha ( cachimba del tabaco o de vapor Stones ) 4. carbón (recomendamos Coco Charcoal ) 5. The Bowl Derecha (Debe tener un diámetro mínimo de 2 "o 5 cm ) 6. El Kaloud Lotus ! Paso uno : Paquete de su recipiente según las instrucciones de este video. Si usted no está utilizando un Vortex Bowl, también tenemos tutoriales sobre el uso del Kaloud Lotus con el Harmony Tazón , Extraterrestre Bowl, Phunnel Bowl, Gran egipcio de Clay Bowl, y el Pequeño Cuenco de Arcilla . Paso dos : Embale el Shisha sin apretar y empujar a la mayor parte del borde exterior para que haya menos Shisha hacia el centro y así las protuberancias en la parte inferior de la Kaloud Lotus apenas tocan Shisha ** Por favor Nota Ciertos Bowls Vortex puede tener que tener el Centro Spire lijado ** Paso tres : Coloque el Lotus Kaloud en el Vortex Tazón de asegurarse de que al menos uno de él ventila en la parte inferior de la Kaloud Lotus es el Shisha Paso cuatro : Cierre los orificios de ventilación para lograr el máximo de calor y espere unos minutos ( vale la pena la espera, lo prometemos! Paso cinco : Ajuste las rejillas de ventilación para ajustar el calor si es necesario . Disfrute de su Kaloud Lotus !!