How to use Thermostat- Emerson 1F80-0261

[@FedericoEManzo]

That fact that you said 5-1-1 makes total sense and answers my question right away. Thank you

[@How2]

Happy to assist and thanks for your comment. Please let me know if you have any questions.

[@mikehaley3997]

Very easy to follow. Programming successful. If only ALL of life’s mysteries were so easily explained. Thank you.

[@How2]

Thanks for your honest review. I am glad that I could be of help programming your thermostat. I made page solely for purpose to help Homeowners and make their life easy. I post new content every week, if you wish, please subscribe to the Channel. Thank You

[@cmccabe75]

Thank you! My batteries are low today (a Sunday) and the house is heating up. Your easy to find and follow directions helped me keep my house, and temper, cool.

[@How2]

Happy to help and thanks for your review. I have also posted a video on "How to keep the house cool during summer without AC." It got more quick tricks that can help. kzbin.info/www/bejne/fJi3pKqOmrGmn5o

[@celiavilla8389]

Thank you for this informative video , exactly what I needed.

[@How2]

You're welcome. Thanks for leaving us a comment.

[@aproberts74]

Thank you! Very clear, precise- yet simple- instructions. Good job 😊

[@How2]

Thanks for your review. Much appreciated

[@briankraemer7375]

This is a big help!

[@yanetreyes6512]

We have it programmed at 75 but the big number is showing 60, any idea why this could be happening? Also should the fan stay ON or AUTO?

[@yanetreyes6512]

It was the battery 🤦🏻‍♀️

[@How2]

This means heating is not working. Please check the Furnace Filter and outside Furnace vents for any ice buildup. Once both checked, then restart the furnace few times. Fan should be on Auto, so fan doesnt run all the time. If you put the fan on ON, the blower helps circulate cold or hot air throughout your home until the temperature reaches the thermostat setting.

[@marjorie.kaestner]

Thank you!

[@How2]

You're welcome. Glad that this video helped.

[@kellz6731]

Thanks so much

[@jacobhernandez1104]

Is there a lock setting on this model ?

[@How2]

Hello Jacob, No, this thermostat doesn't have lock setting as per the Manual Information.

[@henryhenry6139]

I can’t adjust the temperature do you have any idea why the heats still running I’m just not able to change the temp

[@How2]

Hello, Can't adjust? as you cannot go higher or lower by pressing button? OR if you do it and then comes back to different temperature settings?

[@henryhenry6139]

@@How2 can’t go higher or lower with the up and down buttons

[@How2]

@@henryhenry6139 If buttons are not working, then it seems to be Thermostat issue. You can try below- 1. Remove the thermostat from wall. You can hold it from top and bottom OR left and right, and pull it out. 2. Leave it out for 30 seconds 3. While it's out, check wire connections at the back and dust off the device. 4. Install it back and it will restart. 5. Try if it works. If this doesn't work, then Thermostat replacement will be required.

[@henryhenry6139]

@@How2 thank you

[@XzreflexX42]

My backlight setting is set to on but after about 10 seconds it turns itself back off. I seen something in the manual about a c terminal and cdl but I'm not sure what that means.

[@How2]

Hello, Did you change the settings to keep backlight permanently ON? If not, please go to 8:59 of this video regarding that and to get access to those settings, please watch video at 5:46 Configuration Menu Settings. Let me know if this doesn't help.

[@rcstreetbeatz]

The ac is on cool auto but it holds at 83 even though I change the temp to 65 on the side please help me

[@How2]

Hello, Put set your temperature and press HOLD button. May be yours is on programming and it takes it back to scheduled temperatures. Let me know if this doesnt work. Thanks

[@shahinshahab5367]

how do i turn off any programming i did and the thing I set it on. how do I go back to the normal manual one with no date and not set

[@How2]

Hello, Please Press Run/Hold button to use manual settings. Once this setting is active, you will see tiny "Hold" on top of Room Temperature number. Hope this solves your problem.

[@mechitasusa3342]

Excellent ❤ Thanks

[@tothepoint-canadadiariesfr6576]

Great Video...Thank You :)

[@How2]

Happy to help. Please subscribe for more helpful videos.

[@bajeebies]

What is the song called in the background????? I love it

[@bajeebies]

And how to I switch to Celsius? Mine is in f.

[@bajeebies]

Never mind I watched a bit more, and finally changed it. Thank you!!

[@How2]

@@bajeebies Song name is "Oh My by Patrick Patrikios" Thanks for watching the video.

[@nurdinosman5938]

Mine is on but it blows cold air while on the heat setting I don’t know why

[@How2]

Your furnace may be not heating the air. Please check if the outside vents are clear of any ice. Shut off Furnace for 30 minutes from main switch and restart. Please try this and let me know

[@aoandtimbit2580]

How do you factory rest ur thermostat

[@How2]

Hello, Please Press UP arrow, DOWN arrow and Time buton simultaneously to Reset the Thermostat. Please let me know if you have any other questions.

[@1012onesmartlady]

When I push run/hold, what’s the difference between HOLD and SET on the screen?

[@How2]

Hello, HOLD is to hold the temperature that you want your house to have all the time. RUN is if you want to run it as per schedule. Please watch video at 2:46, it explains both in detail.

[@AdrianaRuiz-we1to]

How can I know if when I reset the thermostat it will go back to working as it was before, I need this cold all the time since it's summer, but it only cools at times

[@How2]

Hello, 1. If you resets, it will take you to factory settings 2. If you wants cooling / AC to work all the time, please make sure to choose the temperature and press HOLD. If you don't then it will use the schedule settings and they may change depending on how the schedule settings are set. I hope this helps.

[@luisdelare1031]

Muchas Gracias!!! Excelente video. Saludos!!

[@How2]

Glad that this video helped. Happy to help.

[@luhkemo]

How do you take the big number off temporary hold

[@How2]

Hello Luh, So you want to put HOLD on the temthat you want to set? The button that say HOLD/RUN, can be used for this. When HOLD it will hold your desired temperature. When at RUN, it will be using programmed or scheduled temperature.

[@_aminaelizabeth]

Hello. I have this same thermostat. I have tried to set it on 68 degrees but it will not go any lower than 80.. I’ve programmed it to 68-69 degrees for every day and it still hasn’t lowered!

[@How2]

Hello Amina, There can be few scenario- 1. If you don't have Air Conditioning then lowering the temperature will not work. You may have Outside temperature closer or higher than 80 Degree, which is warming up your home. 2. If your turned ON your Air conditioning, and its not cooling your house, then Air Conditioning system might not be working. please contact Air Conditioning Contractor 3. If your furnace is heating up continuously even after setting lower Temperature, please Contact Heating Contractor to check Thermostat wiring and Furnace system. Hope this information helps. Please let me know if you have any other questions.

[@anniechart]

Good video, thank you just one question: I turned on my AC for the first time this season, and it is not cooling the house. I noticed that the snowflake icon is flashing, and I don’t think it used to do that. Do you know if this indicates a problem? Thank you in advance!

[@How2]

Hello, Snowflake and Flame icons will be displayed (flashing) if the thermostat is in lockout mode to prevent the compressor from cycling too quickly. To turn it OFF, please go to Configuration Menu (watch video at 5:46 ) then go to Setting CL i.e. Compressor Lockout settings at 8:28 of the video to Turn off the setting. But this comes again, please get the system inspected by HVAC professional.

[@anniechart]

@@How2 Thank you so much for your reply. I did as you suggested, and it showed the CL code and then the upper left-hand corner it said OFF. Does this mean that the CL code was already off? I’m sorry to keep asking you questions, and I am grateful for your follow up.

[@How2]

@@anniechart Yes, that mean it was already OFF. If this issue continues i would recommend getting this checked by HVAC professional.

[@anniechart]

Well, the HVAC technician told me that there was no coolant in the system due to an error that was made when they last recharged it. All is well with now. Thank you again for all of your very good advice!

[@sarbjitjanjua5603]

For our thermastat, we keep the heat up but it ends up automatically changing after a few hours. How do we get it to stay the same?

[@How2]

Press RUN/HOLD button after temperature is changed. Make sure display shows HOLD. Temperature will be held untill changed again.

[@domp301]

Very good video, thank you

[@How2]

Thanks for your comment. Happy to help. Please consider subscribing for more helpful videos.

[@blparniske]

Perfect, now how do you totally reset it to start again?

[@How2]

Hello, Please Press UP arrow, DOWN arrow and Time buton simultaneously to Reset the Thermostat. Please let me know if you have any other questions.

[@candikane30]

So my snowflake icon was flashing and I followed the directions and the CL is showing off. But the AC is still not working. Is there anything else I can do to troubleshoot?

[@How2]

Hello c, Please get Coolant checked. As someone posted same comment few weeks back, and their HVAC tech found out it to be coolant issue. Let me know if you have any questions.

[@yussiibanescu8904]

Can somebody tell me how to change from Fahrenheit to Celsius in this thermostat please?

[@How2]

Hello, Please watch video at 9:50, i have explained how to change between C and F. To go to those settings options, please watch start of configuration settings starting at 5:46 Please let me know if you have any questions

[@isabelibarra362]

I changed the batteries and it still shows Change Batteries on the display. Do I need to do some kind of reset? if yes, how?

[@How2]

Usually it resets automatically. Please check if the battery is inserted in the correct side. Then you can turn off the thermostat by turning off the furnace and restart. Thanks

[@FM-nk1zh]

What temperature should ac be on

[@How2]

Hello, Setting AC Temperature is completely depends on your comfort level. This Thermostat can be anywhere between 7 C to 32 C. Please choose you comfort temperature. Thanks

[@FM-nk1zh]

Thanks, but that didn't help

[@How2]

I am really sorry about that. Please let me know, if you have question that i can answer. Also, was you question for what temperature it should be ON? Or at what temperature AC turns ON?

[@lynettelamouche3252]

@@How2 when the cool temperature is on, is the higher the number, the cooler it is? Or

[@How2]

@@lynettelamouche3252 Number must be lower to make it cooler. As lower number indicates lower temperatures which means cooler it gets.

[@tony9526]

My thermostat will not light up and turn on. If i set it to fan on itll blow air. But the thermostat doesnt work?

[@How2]

Hello, If you got cold weather, please check Furnace vents, if they are blocked, then Furnace doesn't work but blows air. please watch this- kzbin.info/www/bejne/nn7cqXysgrWfpNU Otherwise, it can be some issue with Furnace wiring, you may need to contact HVAC Professional.

[@tony9526]

The control for the thermostat wont turn on even with new batteries

[@How2]

@@tony9526 it looks like Thermostat issue. I would recommend you to change the thermostat, please make sure you connect wiring correctly, if you decide to replace it by yourself. Or please contact HVAC professional.

[@savannahbrown5722]

Is it my thermostat or system I switch it to ac mode nothing comes on I switch it to heating mode nothing comes on. What could it be?

[@How2]

Furnace might have Power issue or sensor issue. Please check Furnace Power and Replace filter. Turn off Furnace for 30 minutes after checking ab9ve and restart.

[@jaymuh31]

hello out thermos keep saying change battery, we already change new battery, reset it and even turn on furnis still saying change battery

[@leroyhutch7535]

make sure the battery is put in correctly

[@evanraleigh4631]

HVAC tech here, Make sure battery is inserted properly, if that does not work check both battery terminals for corrosion if you see any sort of corrosion on either the terminals or your batteries then you need a new thermostat.

[@danielguzman8346]

My termo sta.. Doesnt work..its brand new. It blows cold air instead

[@How2]

Hello Daniel, There can be multiple reasons- 1. Please check if thermostat is set on HEAT mode. Which is system button on bottom left. 2. If its already ON heat mode, please raise temperature and check if Furnace is turning on in basement. Hope this helps. Please let me know.

[@paulenzor6993]

Is there not a simple way to manually turn it off and on!?!?!?!?!

[@How2]

Hello Paul, You can Turn it OFF(middle option) from System switch (Heat/OFF/Cold) on bottom left corner. Hope this is what you are looking for! Please let me know if you have any other questions. 😊

[@LouisDeRosa-l3f]

Can I adjust temperature manually

[@Mr_mayhemftw]

I don’t know if you will see this or not but my display is not working. How do I fix it.”?

[@raymonddoria9223]

Thermostat working but ac doesn't work

[@How2]

Hello Raymond, There can be multiple reasons- 1. Please turn ON cool on thermostat 2. Please check AC power is ON from Main Electrical Breaker Panel or sub panel 3. Please check AC is working, sometimes it need cleaning or maintenance service after winter. 4. Wiring can be loose. Please double check above items

[@lawrencesmith5586]

😅❤

[@bernadineblack7376]

Doing way too much.