How To Use ToneNet ||| ToneX (Step-by-Step Tutorial)

[@ralphmuller6040]

As usual you have saved the day! IKM need to give you a medal.

[@LunaGuitars68]

In 2024 I can't believe this is the best software IK engineers could come up with

[@c36captain]

Lots of great points, Question - when you are playing your guitar in the player mode with Operation on Interface and bypassed - I can't sample the tone models with my guitar (input and output is the tonex pedal), Did I miss a step? Thanks for any advise Dan

[@joeljohnson9583]

I have the same issue. Did you figure it out

[@MonikPeters]

Thanks alot very interesting. Can you tell me how can I save these edited presets to the Tonex Pedal?

[@galtonestudio]

Basically: 1) Plug in tonex via usb 2) Open Librarian Tab 3) Drag and drop presets :)

[@piotrchrzanowski8640]

Any hint how to get the presets sound good in a band/gigging setup. The 2nd guitarist is playing on Bugera with Jet City 2x12 cab. I connected tonex to FR-12 Fender cabinet. The sound I'm getting is rather crappy.

[@galtonestudio]

@@piotrchrzanowski8640 napisz na priv do mnie na FB lub mail, postaram się pomóc ale muszę mieć więcej info :) Pozdrawiam!

[@ant1738]

Excellent! Very helpful .. The issue I have when using the usb out .. I reinstall the driver's, updated everything re authorized .. Set my pedal to interface .. I cannot get any sound from the u s b

[@vo1dee]

Can't I scroll trough the presets, tweak and safe to the tonex pedal? Just got the pedal and it sems really complicated to replace the presets on the pedal

[@pwracdc]

I purchased the AC/DC pack, it sounded great in rehearsal through the daw!! I am new to tonex, bought the pedal recently and am experimenting with it. I don't understand how to add a pedal to a preset, for example the Schaffer replica pedal in front of it. I have the physical pedal that i am using, but do not understand how to build a chain of effects from a preset or tone that is downloaded.

[@galtonestudio]

Unluckily you can't do that, it works only in amplitube - i have a seperate video on that topic. If you have a daw basically watch tutorial and: Open Amplitube Get (for example) my preset from pack that you bought. In a chain - add tonex Stomp (and find a booster, maybe there's a Schaffer replica on tonenet). If you're using daw, best idea is to use a midi controller + amplitube. You get tonex sound + amplitube flexibility and fx. Other options are quite limited - you'd have to use external pedals and build a small pedalboard.

[@jonathanrodriguez5584]

Thank you so much for this tutorial!!!

[@soundseeker2138]

Great run through!

[@galtonestudio]

Thanks a lot!:)

[@ant1738]

Thank you! I purchased the Van Halen Vol 1 ... excellent!

[@mcadder]

Thanks for a great video! I can see that you have an extremely low input. Is that something you did on purpose? What level should the input be at?

[@galtonestudio]

Yeah, i prefer to use fairly low input, because I noticed that most of the tones (at least from my experience) sound way more realistic. But it's pretty personal. When people are using my profiles - i tend to recommend setting input pretty low (to begin with). Cheers!

[@mcadder]

@@galtonestudio That's exactly my conclusion after trying Tonex for a week. Thanks!

[@r.llynch4124]

I think everyone should keep in mind these profilers like tonex and kemper are really made for a pedalboard that uses a switcher with midi so you can switch tonex presets along with any pedals that have midi control. Something like the GigRig or Boss ect.. It's too bad kemper left out MIDI , not sure what they were thinking?, Also, you should set input trim to 0.0 and use the amp gain knob per guitar/ preset and save per preset as needed. The global input should be left alone. The gain knob does exactly what the input trim does and saves per preset unlike the input trim.

[@MsEsphorizon]

In which pack is this modded marshall that is free ... I was looking to buy the whole pack or just this amp and I can't find it on your site.

[@galtonestudio]

It is not in a pack, but i am currently modding one of my Marshall amps with hose mod, so it should be available in 2,3 months. Probably the closest tones are in my ultimate 80s and van halen packs. Cheers!

[@galtonestudio]

Btw you can get this tone from my tonenet for free, just type in modded Marshall.

[@lemzilee6061]

Hi, I bought a brand new Tone X, registered it, and installed the product manager. for some reason, the Tone X software does not show up as an option to download, even though it shows it as being registered to my account. Any idea why?

[@galtonestudio]

I had the same issue. It seems quite dumb, but try to unauthorize and authorize again. Maybe that will work. Cheers!

[@lemzilee6061]

@@galtonestudiohow do you even unauthorize the tone x pedal? I don’t seem any options for that

[@galtonestudio]

@@lemzilee6061 send me screenshots to [e-mail], i will try to help tomorrow since it is around 1AM where i live :) Cheers!

[@odayalobaidi6771]

How can i upload from tone max to tone net Also my preset on tone max how can i find it on AmpliTube 5

[@musiccreation1198]

Very helpful ... ty!

[@Salantsoundstudios]

Nice video, nice rockin!!!

[@ant1738]

You touched upon something interesting in your video regarding the settings of the captures .. Ideally everything should be set at five, neutral. By changing the EQ ... How does the algorithm in the software understand the changes? Will it make a capture actually sound worse even if it makes it sound brighter if you adjust the presence and the treble? Or has IK Multimedia discovered Termintor AI for amp models?

[@galtonestudio]

To be honest eq works fine, in my opinion better than in kemper that I had previously. Gain is spot on in most cases. Overall I prefer to change IR if I want more drastic changes, but for minor changes it works ok :)

[@ant1738]

@@galtonestudio Thank you I appreciate the response

[@tomusic8887]

I cannet get a my guitar to sound via the computer 🤷 maybe my soundcard zoomr16 is bad ???

[@BaronVonSchnarffler]

Sounds great! Your VH presets sound accurate buy maybe a little more Bass/Midrange

[@jimtalltheislandbrothers6639]

That software is really putting me off

[@advanceddragonchasing2286]

excellent

[@brianb8512]

Can someone please tell this guy, and every other podcaster and YTer, that just like the action on a guitar you need to give the microphone space to breathe. You don't need to swallow the microphone brother. Keep it basically a fist away from your mouth at minimum. I often wonder about these musicians who don't have an ear for this or even basic knowledge. Sigh.

[@galtonestudio]

@@brianb8512 as you may (or may not) know it is an sm7b that has a capsule pretty far away from the grill, especially with a foam on. It is absolutely normal to use it this way. Even if that would be too much, I prefer to have a slight proximity effect without insane bleed and phasing.

[@mikesmith1290]

As long as there isn’t clickey mouth noises, I’m good