How To Vent Your Microwave Outside [Over The Range Style]

If you want to help support Shannon to produce more videos like this, visit www.house-impr...
Shannon from www.house-impr... shows you how to install an external wall vent for an over-the-range (OTR) microwave.
Amazon link to the AST Sealant Tape shown:
USA: amzn.to/2VvzCEA
Canada: amzn.to/3AZQgwA
Amazon affiliate link for Range hood duct:
USA: amzn.to/3zVI0Mm
CANADA: amzn.to/3A0dbWC
Amazon Affiliate link for oscillating tool saw blades:
USA: amzn.to/3wJ3TOW
CANADA: amzn.to/3kwDyP6
Link to the other previous over-the-range OTR microwave installation complete how to DIY video: • How To Install A Micro...
If you have questions about your home improvement projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-impr...
Facebook: / 180657245288627
Twitter: / house_improve
Video edited by / @rugcarpet6664
Video © 2021 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

[@FutbolBaba]

This is perfect! I'm doing this exact same project with studs and electrical in the way. Why don't home builders just do this from the beginning? Because they're lazy. We cook a lot and venting back into the kitchen makes absolutely no sense. The metal screens under microwaves are not filters. Period. Thanks guys, great work.

[@MageLeaderInc]

I just can't get over the fact that this is a $500-$1000 job now days

[@littlerufe]

So great that you uploaded a video of the worst case scenario! Really helpful for those of us who are in the real world, dealing with the same situations.

[@timtuckercom]

This looks easy. Currently trying to figure out how to add a vent on a brick wall.

[@angiedaoust]

Started watching you years ago and what I liked about your work is that you tackle everything. Not just the new stuff from the ground, bt the stuff we all come across at one point. Very good teacher!

[@piratemikestreasure]

Thank you for your kind words and support. 🏴‍☠️Mike🙂

[@abrown10503]

Excellent tutorial. It was incredible my GE did not have anything to describe how the exterior rear was to be installed. Thanks Shannon, it saved me from making my usual screwups.

[@TedWright-qd1bs]

We bought a new home and builder did not want to install rear exhaust. Thank you so much for posting this. It’s perfect and you are very much appreciated. I will begin this project next week and send you details.

[@hmax1591]

These are the videos that I enjoy watching because they help you solve a difficult problem like the stud in the way. Thank you. Learned a lot.

[@Luvurenemy]

Thank you so much. Professional installer forgot to vent the microwave to the overhead hood. He installed it without a carbon filter with the exhaust going into the kitchen. Thanks to your video I was able to correct it. Merry Christmas! God bless you.

[@c31979839]

I'll be doing this task shortly, so it's perfect timing for this video to come out. Looking forward to seeing what tips and methods you use.

[@kathynguy5967]

Very helpful video.Thank you for being so thorough. Our 10 years micro recently stop working. Because of your video we were able replace our broken microwave. Thank you!

[@workoutrescuewithblakehowe]

Great video, I’m “thinking” about doing this project as we need some venting from our microwave. This is the exact set up we have and the video was perfect going step by step. I love the fact that there were some obstacles during install that most people don’t expect but almost always have like the plug wiring and stud in the way. Also, the tips such as giving some room for error while cutting the sheet metal of the vent were great because you don’t think of that, after you cut it’s too late. All in all, best video I’ve seen on this type of project.

[@BobsHomeServicesLLC]

Nice video Shannon. You really took the time to explain it all. For those watching, sometimes with Condo's or Row homes you have a party wall behind the microwave that goes into someone else's home and in that case you have to vent up into the cabinet and then 90 and run through all of the cabinets on the wall until you get to the exterior wall on the right of left of the microwave or hood. Lots of great tips and the next time I install one of these again I will be using the foam expansion product that you used. Great idea. Thanks, Bob

[@HouseImprovements]

Yes depending on your stoves placement and your home you may not be able to go straight out the back like this . That is why that fan blower can be turned for different direction of exhausting. Basically you can go out any exterior wall or roof depending on your home .

[@flatroc1]

I had the exact situation with the stud dead centre of the vent outlet. What i did was run two 3x4" ducts out, either side of the stud, as the outlet is divided in two on the unit. I put a regular 3.5 x 10" vent damper terminal on the exterior wall though. Thanks for another great vid.

[@JeremyThielman]

Having the vent blow into the house is a pain. Grease gets on everything. 20 year old house with a gas stove, contractor buddy didn't know how I was able to buy house in CO, said it was a code violation; Carbon monoxide. Ran into the same stud problem. However one of the studs was behind finished cabinetry and I did not want to take it down, damage the paint job, and moulding work. so I used a flat mending plate with a 3" pipe adapter and a 4" dryer hose fitted to the exterior of the mending plate. Yes, I am forcing the flow into a narrower path. I'll check it in two years, set it in my calendar, to see if there is any excess grease build up on the motor or plate. But I am happy to get it done after living here for 11 years!

[@jeffschmidt]

It's a small detail, but I really appreciate you dropping the volume of the video while hammering or using the impact driver. Thanks!

[@Breyfogle126]

Definitely deserves a like and subscribe. Great instructions! Wish my contractors would have done this in the first place, but I appreciate you guys making the video!

[@barbarafinlay2915]

Thank you so much Shannon being so exclusive and for addressing my personal issue. The use of sealant tape to bridge any tiny gap is what I need, that and the foil tape. I am hoping I can also use the foil tape to stop drywall from blowing off where it was cut. I had called the microwave company and searched the net for days to solve the problem. No one had a suggestion to assist the small back flow of air into the house through the tiny space on the sides of the microwave. No one until you! So thank you very much for creating this video :)

[@caseycomely1231]

there should never be any gaps it should be continuous overlapping metal in case of a fire and not too many elbows to collect grease !

[@mae2759]

I like that you showed the worst case scenario. All of these other home improvement channels are like "if you run into this complicated obstacle, just do this - easy as pie and I'm not going to show you anything on that." haha.

[@MageLeaderInc]

Worst case would have been having to go up through the attic and out the roof or gable end

[@MicheleScacco]

Brilliant. The header-footer build is excellent. Thanks for showing a worst-case scenario!

[@TCLarson168]

This video was super helpful in figuring out how to install our microwave exhaust to outside. Thank you for a clear presentation. Luckily, we didn't have to deal with a stud or electric wire, but all of the other guidance was purr-fact!

[@blueplasma5589]

I know how it is remembering at the last minute about EYE PROTECTION! Finally a fella who is demonstrating the correct procedure to perform something on you tube, hurray!!

[@bbruno1973]

Great video!! I was stuck with how to attach the vent to the microwave. The appliance store said "oh it just goes up against the vent. there might be some play but thats how it works". Made no sense to me. Directions made no mention of the bracket. Put microwave in. Finished watching this video. And realizing the bracket sitting on my kitchen island was the same one you added. Took the microwave back out. Added it. Everything works great.

[@pmaddox]

Shannon I dig how you get right to the point and without a beer in your hand like other video's I've seen....right on man!

[@chuck314]

It's funny that I keep running into / finding your videos throughout the last few years of different projects that I've tackled but wanted some perspective and visual on how to do it before I try. Your videos have always served me well. I'll be installing an over the range microwave / hood combo in a week or two and this helped a lot! Thanks for what you do. :)

[@ItsMeLos]

best install I've seen yet 🥇

[@tedkrush5661]

Clever on pre-drilling the holes for the wire before hand. I would have been cussing at myself. Thanks as always.

[@SeanBlader]

I am just about to the point of wiring electrical boxes and was worried about how I was going to get my microwave vent in, and this got me exactly what I needed, I had a stud right in the way, and it was totally worth it to me to cut out that stud and frame around the space. Next step is to cut the sheathing and steel siding I have there. Excellent thought putting the foam strip in there for a better seal. I'll be doing that, although at the same time I thought about getting some sprayfoam between the studs and the duct. I guess I'll just have to see if I can even get in there.

[@stevebroadway8405]

Hey. I just wanted to thank you for your content. Your video was my exact situation and your video walked me through the repair and helped me complete my repair with ease. Great work..

[@bellarosamariaboutique]

I can't believe I watched this whole video. Wished you were in New Jersey. I need help with replacing the exterior microwave outside vent and new microwave. I will order the microwave and parts for delivery. Hoping to find a good handyman to help me. Thank you for this great tutorial.

[@bobfyke4743]

I just have to say that you did a great job on this video. Clear instructions, with thoughtful comments. Good quality audio and video. Very helpful. I subscribed and hope your others are of the same quality. Thanks!

[@davidramey7186]

This is by far the best video for this that I’ve seen but the hardest to find I’ve been looking for videos for days on this Love the blocking idea I’ll be doing that for sure I just wish there was a better “coupler” to “couple” the microwave/range hood to the wall vent

[@Radtke_Makes]

"Eyeballs don't grow on trees, folks!" Now that would be a terrifying sight! :) love your videos

[@bloosbelly]

Had almost the same deal, and wasn't willing to give up the cabinet space. Went straight up and on top, added some crown moulding and some fake plants to hide it.

[@katevenne3283]

This video was incredibly helpful! I’m thinking about doing the same and will likely run into a framing issue. Thorough and detailed! Thank you!

[@Vanessa-pe1fo]

I've watched how to install laminate at least 3 times, I learned so much from you. keep up the good work.

[@Johnson25801]

It's nice to see someone advocate for safety equipment

[@cbayoo9405]

Thank you for teaching right way to seal inteior side of the vent. Replaced old microwave amd found nasty stuff from last guy skipping steps! Cheers!

[@tonym6920]

Great job Shannon, you take great care in your work. Great job! 👍👍

[@HouseImprovements]

Thank you so much!

[@DavidWilliams-wj4sc]

25:46...yep. I need to start wearing glasses too, down here in Grand Rapids MI.

[@8cupsCoffee]

Best channel for real DIYers

[@tribulationprepper787]

OK EVERYBODY...... Shannon's video just saved you having to hire someone like Shannon and pay them A LOT OF MONEY!!! IT'S TIME TO COUGH UP A FEW BUCKS TO SEND SHANNON'S WAY. JUST DO IT.

[@carpnotes4607]

Righteous install bro

[@timmartin178]

Awesome videos, both this one and the previous (vent inside)... Gave me all the information I need to vent back, into the wall, up the wall, the back through the wall, to a 3 inch line that runs above the cabinets, hidden by crown. No need to go through the upper cabinetry... awesome... thanks.

[@davidthelibrarian]

Really helpful taking the time to show how to deal with the stud right in the middle of the vent. Thanks!

[@mangatsinghdeol2941]

Help i was looking for. Your video made my job lot easier. Thank you sharing the valuable knowledge and experience with us.

[@spin1788]

Excellent videos, real world problems and how to solve them

[@philmann1445]

one of the best project videos i've seen in years! excellent job!!

[@JamesPeterson-dd2iu]

Great move on using that compressible foam insulation tape on flange of damper assembly! I see no other way to make that seal while re-installing the microwave and venting. Awesome tip.

[@billoosingh15]

Thanks for showing the detail! Really gave me confidence to vent my microwave since I have a stud right in the middle!

[@j.d4674]

These projects always require some improvising and I think you’ve done an excellent job of that. Solid video all around 🤙🏻

[@HouseImprovements]

Glad you liked it!

[@vince9486]

For the foil tape, I use the tip of a razor knife and pick at the edge and the backing comes right off.

[@MattyWill1]

Dang. You have the stud in the way and also the tile. Well you had good luck with the drywall coming out all at once.

[@rickyhammond2345]

easiest way I've found to get the back off the foil tape is fold one corner over...pinch your thumb and pointer finger over the corner and drag your thumbnail from the point down...it separates the to and gives you a start to pull from

[@01s4biturbo]

And once you have it started, just leave a small length of the paper extend past the tape left on the roll. it is effortless after that.

[@AdamGrayson]

This is some quality content right here.

[@megamanfun]

Impressive and help. Just one observation. The top of the outside vent needs something to divert water from seeping in.

[@stevealaska73]

Thank you for another fine video. This is on my "To-Do List".

[@Ashleigh1959]

Great tutorial, I have the same issue with my microwave, now I know what to do. Thanks Shannon.

[@gregspencer8472]

Another great video Shannon. I was hoping there was going to be brick on the outside.. would be interested to see how you cut a rectangular hole in that.

[@HouseImprovements]

We can discuss that in the forum if you want to post your question there.www.house-improvements.com/forums/

[@danb4376]

I did something similar with a 6" duct hole through brick. Ended up perforating the circumference with a 1/4" hammer drill and busting the core out. It worked out not too bad. Luckily the vent had a flange that covered the imperfect hole.

[@normandybeach9230]

Shannon "I'm roasting, it's gotta be 30 degrees in here!" 🇺🇲's "Canadians feel hot at freezing temperatures!" 🤣🤣🤣

[@HouseImprovements]

Well in all fairness that is 30 C which is like 86 F and then you add some humidity and me working ! it was hot.

[@1stgenbirdNH]

It's 30° Celsius.

[@Memo-nd6fj]

I subscribed a while ago bc you have the best DIY videos than anybody else out there. More simple details and include info that is very helpful. Thanks!

[@HouseImprovements]

I appreciate that!

[@hremaddox]

Thank you! This is exactly what I needed. I have to run mine on top of my cabinet out the side wall, but this helped so much. It looks really nice.

[@manuelmuradas5191]

Great video for DYI's. Thanks for sharing this knowledge to us. Keep the great work that you are doing.

[@williamwallace1679]

What an excellent bunch of workers

[@ankitGrover-LTD]

Awesome video! Very nicely done.

[@Sctronic209]

Thoroughly enjoy your videos.

[@brendanf8969]

Much respect regarding the eye and ear protection! Great video!

[@pentonhusqvarna]

Perfect video! I've got to do the exact same mod with a stud in the middle that supports the ridge rafter of my roof. Will probably double the framing bottom and top but I was thinking I probably needed to go to the floor with a cripple stud - not going to do that now. What you did should be sufficient with my increased framing. So glad to have found your video!

[@HouseImprovements]

If its indeed supporting the ridge beam then I would do a header across the opening supported by cripples to the bottom plate

[@decosse01]

@@HouseImprovements Well intended - The cut Stud is effectively the Cripple Stud - what is required additionally are Jack Studs - I think your intention was same, just nit-picking on the terminology (although you just repeated what the requestor had used). 😁

[@misaonthefly]

thanks man... i'm from mexico and we usually build with masonry... but i got the gist of it pretty well

[@raystout7673]

Great video - you can install my microwave & vent anytime. Quality work.

[@jennifersugint]

Great video! So glad I found your channel. I was able to get my sewer pipe done from one of your videos to the best of my abilities. Venting my range hood is next. I know watching your videos, you’re doing it the right way. I will certainly have a lot more hiccups along the way of course lol. Thanks for these videos!

[@davejohn255]

Your video is why I do things myself...I wouldn't trust anyone to have the attention to detail that you did here.(Or a homeowner would).

[@FSCHW]

Good video. Would be nice to see one mounted on an inside wall.

[@yosh1to]

As per typical building code, you also need to install jack studs as part of the restructure even if it’s not load bearing wall. Ask any building inspector they will red flag 🚩no pass this. It’s happened to me and had to redo drywall, etc was such a pain, i will never forget it. I’m not trying to be a d*ck, just want to share the details jumping out at me, otherwise it was good for most part.

[@RuggerDez]

This is exactly what I needed… thank you !!!

[@carlosestrada-qh7sb]

Nice work and very detailed It helps a lot Thx

[@jamiejackson1026]

Nice thorough, detailed video - makes a project like this do-able. Also, thanks for the extra tips on sealing everything up!

[@michaelmitchell9612]

Thanks, getting ready to install new REAL venthood and I also have a stud in the middle.

[@diastoleny]

Just what I needed to do the job. Thank you very much!!!!

[@DonHall666]

Exactly what I needed for my project. Thank you!

[@robertlyman9789]

That vibrating saw thing is cool

[@chengchenggu5324]

Really great job. That is what my husband going to do. Thank you very much for sharing.

[@petergausden1389]

Nice job. I have to do the exact same process as I have framing in the way. Thanks so much for the clear instructions.

[@harrisond8132]

Excellent video. This is the exact same isse I have with the stud directly in the center. Thanks!

[@ilovethewiggle-crypto8033]

I wish the contractors would watch these. I had to educate my handyman. Ugh. I'd have done it myself if I could have lifted the damn thing. So thanks

[@markbuhler7562]

Excellent, I like your workmanship.

[@aaron74]

Great work, that is quite a hack. But the end result is perfect. Lucky there was slack for the plug.

[@HouseImprovements]

Yes that was really lucky.

[@aaron74]

@@HouseImprovements It's really shown me the necessity to leave slack when installing device boxes. Cheap insurance.

[@MageLeaderInc]

It's funny you mentioned the mast to your power being on the other side, because I thought mine was but it's about 8" to the left thankfully.

[@donhudson1427]

That is exactly the project I'm doing. Thank you very much for all the information.

[@HouseImprovements]

Wonderful!

[@johnhowardnardine6815]

I am not even planning on installing a microwave, but I watched the whole thing, mainly because it gives me insight into how to tackle jobs. The biggest obstacle for amateur DIYers like me is the fear of getting in over our heads, that we'll break something irreparably. What I like about your way of explaining your approach is that everything is just a problem to be solved, that it's not magic; it's well within reach of most of us, with a good tutorial like this. By the way, are House Improvements hats available for purchase? and, is buying your merchandise a good way to support your channel?

[@HouseImprovements]

Thank you for the comments. Unfortunately we do not have hats but we have many other products and we have ways of straight donation if you prefer. I will attach a link to our website to check out. You will also find links "support us" and "donate" in the top tool bar. Thank you again. www.house-improvements.com/forums/

[@chrisw.6060]

Bought a new build last year that had this vent installed. First storm we got that had 20 mph winds with it kept blowing the vent flap open constantly and pushing rain water into our duct and proceeded to drain water into our house causing runoff water to leak down the wall where the oven is. It ruined the control board on a new $1000 range oven. I highly recommend against this option.

[@waltcents14]

Excellent demonstration video

[@MattyWill1]

Good video guys.

[@edhale2]

Nicely done!

[@marlboromatt5656]

Never liked microwaves over the stoves. Seems so 1970s. Reaching over a hot stove to mess with a microwave. A beautiful vented hood range and a beautiful gas range is where it’s at.

[@HouseImprovements]

This is what you see here in most average home reno or new home. Higher end homes usually have the gas stove and range hood. with a separate microwave installed in a cabinet under the counter.

[@Jake-ev4si]

Thank you for sharing! Us DIY hacks appreciate the work you do!

[@macsterguy]

Quality job as usual!

[@-8_8-]

Thanks. I'm looking at this same job, but with the caveat of brick removal.

[@mikechiodetti4482]

THAT WAS GREAT! I'm keeping the video for future use. Could you have mounted the outside vent cover, then removed it and put the calking on the vent cover flange or the house to eliminate any moisture from getting inside making it a tighter seal. Other than that, nice install!

[@HouseImprovements]

If you watch to the end I do seal the vent to the siding on the exterior.

[@trudybarker1075]

Liked your way of explaining how to do stuff…..👌

[@Southpaw07]

Awesome job Shannon and love that Milwaukee tool. maybe Santa get me one for Christmas

[@HouseImprovements]

You should!

[@DChomsy]

@10:19 oops did some damage to the right side cabinet door lol. Love your videos though!