How to vinyl wrap your mirrors (outside). Learn how to vinyl wrap alone by @CKWRAPS

Material used: vvividshop.com
More training: www.vinylwraptraining.com
My Favorite tools and accessories I use at my shop:
Heat Gun (Instant heat, no waiting) - amzn.to/3WWHmNC
3 Pack Squeegees (soft, medium, hard) - amzn.to/450sOP2
Wrap Gloves - amzn.to/4aDRAWt
Knife (Have not found anything better) - amzn.to/3KghNj8
Hex Garage Lights (perfect temp for detailing and wrapping) - amzn.to/3wPlut1
Rolling Bench Stool - amzn.to/3UZO1Ej
Tool Cart - amzn.to/44X3nxT
Scratch-safe Ladder - amzn.to/4aDaAEn
Headlight Tint (I put that %^#-$ on everything) - amzn.to/4bYoMZB
Knifeless Tape - amzn.to/3Vg46XK
Wrap Sticks - amzn.to/3wZK1eM
Magnets - amzn.to/44X3cCF
Here's a quick how-to for all those 4th gen Eclipse owners out there. How to vinyl wrap on your own. Follow me to learn how to vinyl wrap anything
VViViD True R Black Carbon can be found here www.vvividshop.com

[@CKWraps]

For Exclusive new 4K Videos on disassembly and wrap installation visit www.ckwraps.com

[@renjitbhattarai4584]

hey CK where do you buy your vinyl? i'm trying to wrap my car so i wanted to where should i go to buy the good one, any websites. thank you man and good job.i want to do my mirror soon

[@jeffreyheelan4850]

So I have to say. After practice and practice I've started wrapping my car and my girls. And with alot of practice and re watching your videos a million times. I've been super happy with it. Thanks for the great videos bubba !

[@SirSmokesAlott]

Always make sure to cut out a breathing hole when wrapping your girls though, i forgot one time and when i returned it was NOT pretty..

[@Scotty_in_Ohio]

First minute in to this I thought this guy was a clown. After he started in with the heat gun he really knows his vinyl.... Great video!

[@gafrancisco]

bullshit ...still a clown...overstretched... to much heat ... when in cold weather gone shrink

[@TheBooze13]

Gilberto Francisco haha do you know who this guy is? clearly not

[@gafrancisco]

@@TheBooze13 i know now who this guy is ... seen most videos of the guy and he is a pro ... in 2014 ... he was a clown ... but then he learned and now is the best ... by the way ...he was cooler then ...now with all the tattoos we looks more a punk ... even the hair was greater then in 2014 :D

[@concrete490]

@@gafrancisco it's going to shrink cause of cold weathe?...but heat is what makes it shrink back into place so you sound like a clown actually.

[@cyqloneonline4855]

@@gafrancisco we are here to watch a video about wrapping a mirror not how a guy looks like. Are you gay? I dont care how this guy looks like. Probably you do.

[@USA_is_a_Republic]

I think I watched this 10 times while I wrapped me mirrors!

[@Vinc3M4st3R]

love the job you did. for me as a beginner, it's well explained and it helped me a lot :) keep doing those videos :D

[@achbanilacran2061]

The dude had the skill from way back then! Nice work!

[@alexandruioanagafitei3840]

really nice explanation about everything through the entire process, i did not lack any intel. usually, i don't comment, but this had me done ;) nice tutorial!

[@juandontworryaboutit4150]

Greatly appreciated for you taking the time to talk about the steps and few extra tips, I'll be wrpping the interior of my e90 cheers from California

[@Gunny559]

Wow I watched the entire video with ease. BEST DIY vinyl wrap I've watched bro! Good job, lol looks awesome.

[@CKWraps]

+JediMasterJF thank you, check out some of our other ones which are more advanced

[@Seeker76543]

I just got the same wrap TODAY from amazon, and looking to wrap my black mirrors also. Glad I subscribed PERFECT TIMING for this to come up for me, THANKS!

[@paulb8153]

Hi ck wraps. I had ago doing my wife Fiat 500 wing mirrors. I made a right cock up. I tried to taking things slowly but the vinyl wasn't big enough. After watching your video I'm going to have another go. Many thx mate. Cheers from the UK

[@wolvoman1]

Wing mirrors are old school, 1950/60s

[@ducstroyer]

I don't know about the highly trained professional, but for the average dIY'er - these are some helpful hints. Something to go by... Thanks for sharing!

[@matta6170]

Thanks for the tips i am in the process of doing my mirrors i was having draw back from the vinyl now I understand what needs to happen

[@cmykimberly]

Nice movado you got there. Thanks for the video!

[@D1G1TALSYNAPS3]

Fast forward eight years, you are now able to do it in one piece. You have come such a long way. I still suck, but you are almost God level.

[@ClintonSnow]

Hi, Vinyl Solutions, you did so great on this video the carbon fiber your video is really helpful and we all appreciate your effort to teach us. thanks a lot and keep doing great videos like this.

[@tarek3702]

I think this was a good video, this was pretty handy for people who wants to try wrapping on their own, I enjoyed it, I'll try this during the summer rather than pay some $160 to do it.

[@nzpyr55]

Props on the Movada Watch. Clean & nice deatiled work! TY

[@pointlessCRAYtv]

Despite all the hate I see in the comments, I think you did great and it looks awesome

[@CKWraps]

Thanks dude, as I mentioned in the video this isn't something that should be done outside or in the wind. I'm just merely demonstrating how to do it. The environment you choose is your choice

[@pointlessCRAYtv]

Vinyl Solutions Exactly, people just need to chill out

[@TrustyAstro]

I really appreciate all your videos. I am wanting to do a space theme wrap on my car and am making this a project to keep me busy. These are awesome!

[@ericfung3308]

I'm actually surpisred, it's such a good video, great explaining. Thanks!

[@bigken3685]

Brooo you have showed me and told me things i so far have not seen on most other wrap videos. The stretch n heat before you wrap i have a way more u derstanding of it now. Awesome video. Perfect wrap and outside. Im pumped cant wait to do this better than i did.

[@rellom777]

Damn bro. You've come along way. Love your channel.

[@mohdanuaraaziz8054]

Nice job. I'm going to wrap my side mirror. I will follow the steps what i saw in the video. Hope it's will work perfectly.

[@javiercavazos9340]

Thanks for sharing your car wrap knowledge...its helped me out alot..keep the videos coming..

[@Favelapat]

Shoutout to Mama as the videographer! Solid video, ordering my vinyl today!

[@Favelapat]

and the felt tip squeegee!

[@erterrill]

Awesome, thanks for the video!!

[@robforn9622]

Nice!! Thanks for the vid. It helps me a lot for DIY.

[@Sky1]

For those that want legal dark window tint, "No officer, it's not tint. It a wrap!"

[@nzpyr55]

Clean, nice & detailed work! TY

[@fairlanewhip79]

You make it look so easy... how do I avoid creases and bunching on curved surfaces? Your videos are great, you explain things the same way I would when showing a layman a new skill.

[@Roadsurfer2k11]

Heat gun and relief cuts at angles worked for me. I just did bottom of a spoiler that i had to work 3 different angles on a surface..wasnt easy. Lots of heat and cutting to work it in

[@Adrian-op5ni]

He does make it look easy. I finished my roof today and it came out awful. 😂

[@Bill-ck3lo]

Top-notch every time CK...and this guy is actually on the Vvivid how to page...so he knows his $hit!! A true master at his craft!

[@Hebrews5]

He made it look so easy. It looked great to me. For those who had an issue with his style of wrapping. What did he do wrong? I read someone said over stretched the vinyl?

[@loganm9784]

I tired doing my mirror and it went pretty well but I had a lot of wrinkles around half the mirror, for a first attempt it wasn't bad but I wasn't happy with it and pulled it off, I think I need to prestretch like you showed and it would be perfect

[@NDBBDB]

Great video, very helpful.

[@mirekwieclawski326]

it looks so easy when you are doing it, I think it is great job, will try myself, but start with something easier first, more flat :)

[@stephaniecarder-gallon3489]

T

[@Mikemiguel85]

Thank for sharing bro. I been think on wrapping mines CF too but I though it would be to difficult. Now I have an idea how to. Can you do the front bumper. I want to do the middle part instead of painting it like everyone else. Thanks again.

[@agaloodyowie1]

I wasted about 7 pieces of vinyl and rage quit before looking up this video! so helpfull, i was using too small of a piece each time and not pre heating. going to give it a go now. 🤞

[@professor_meowington]

How'd it go?

[@Selrisitai]

Did it work this time?

[@johncampbell3304]

Well documented,enjoyed watching.

[@ericd.4253]

Thank God for KZbin I was trying to replace my new cap with the imitation carbon fiber cap I'll take my time and do this

[@overwhelmed2]

Great job CK

[@johnoduor8294]

good work for me,it has really taken me somewhere

[@martinpecheur8506]

Great demo

[@jony6toes307]

Great tutorial.....thanks for sharing your skills

[@Dronismo]

that will hold perfectly for a few months. well done !

[@CKWraps]

+Dronismo 3 years later and it's still perfect

[@williambresinski6706]

What kind of prep would you do to a plastic mirror before you wrap it? This wizardry that you show us has inspired me to try this on my Mustang👍

[@thebardock6785]

Another tip opening your driver window might help you work better angles

[@ngovietduy]

works and looks wonderful

[@EB-bk4kv]

That came out sick dude, thanks for the explanation

[@CarWrapsCasablanca]

Very nice work man , i like your word u say ( you are not superman ,,,, you cant do this on one more try , no body can ) Very true .

[@CKWraps]

Kudro Rico The mirrors hadn't been done on this car yet so it wasn't a re-wrap. This eclipse belongs to a friend of mine who I sponsored with a full wrap. As for brand, I prefer to stay away from 3m. I find it's hard to work with and very over priced. Their carbon fiber also isn't as nice as Vvivid Vinyl, I only use carbon fiber from Vvivid Vinyl. I would recommend using Avery Dennison if you're a beginner. Avery is very easy to use and also more cost effective, I consider Avery to be the Rolls Royce of vinyl brands.

[@marlongereda1045]

can u do a video on how to wrap the front end pls :-D

[@14infallible]

CK Wraps what do think about orafol/oracal 970?

[@mohdnornorshei]

cara warring side mirror viva

[@mohdnornorshei]

CK Wraps

[@damalmeemaduma1637]

Indian dance

[@dadaverage1577]

Always a great job Ck

[@marksmith5208]

Thanks man, I learned a lot.

[@Wightzebra]

The best wrap channel there is!

[@JhonnyTube]

Good video! I'm planning on doing the mirrors on mg car but they have the integrated turning signals. Any tips?

[@gustavonava30]

Looks good 👍

[@tedchen938]

Thank you for sharing your knowledge

[@BillSnow72]

Thanks, great video, appreciate taking the time to explain the details! God bless!

[@MyChocow]

You can tell this guy is a nice guy

[@mickcoomer9714]

I like the pre-heating and stretching but I think I would have fixed the free end to a plastic rod or tube first to give an even stretch and remove the risk of it flapping back on its self in the wind.

[@dakidaki8802]

Really excellent job

[@jeysongomez5476]

Nice work!

[@Realtmurph]

Great video thanks for the help

[@Deathnote0-_-0]

I can't see the fail in something that actually came out good.

[@Roadsurfer2k11]

Black streak on corner from stretching.. used the same material last week and got the same mark. Lifting up the vinyl to get wrinkles out cause it

[@marcogueli7956]

Good work man grtz from europ

[@user-dw6ms4pc4q]

I did a part of my interior and the edges and round parts are coming up after 1 day, was the result because i used a hairdryer vs a heat gun, or i need the 9m adhesive promoter stuff?

[@burningmanmike]

That looks like enough vinyl to do both mirror caps. Could you have cut it in half before stretching, and saved a little money?

[@shanepadayachee9344]

Cool video!

[@asyrafasyraf6923]

thank you so much for all your tips.. its help me so much... btw im from malaysia.....

[@stay_illin7031]

Top video mate!!!!!!

[@thecurvedr]

carbon is hard to work with because of the pattern, you did an alright job. Pretty sure you can do it in one piece, but who cares if it's 3 pieces. The car isnt being judged and winning 1 piece vinyl awards.

[@troyd-motorsport9933]

So Im no tthe only one who thought It did look like he could have done it in 1 piece

[@connorhayward4750]

You make this shit look so easy. Nice job brotha

[@mrclayco2001]

Great video.... Thanks...

[@naughtykid5204]

Wow really great

[@SuperMaxibaby]

i dont think u realise how talented these guys are until you try it yourself, several attempts and still cant get anywhere near getting a result

[@warlocquegander3080]

Nice...Thanks!

[@russellsitaro8505]

Hi Chris I’m getting ready to do a carbon fiber wrap on my motorcycle gas tank. It doesn’t have any hard edges. Pretty much a teardrop shape. Should I pre stretch like you did on this mirror. By the way this will be my first attempt at wrapping. It’s Avery SW900

[@angie624]

Thank you, plan on wrapping the black pieces that hold my mirror all the paint has chipped off thanks

[@jeremyhuang13]

Your a pro. Nice video!

[@todddabber7826]

I would love to see you wrap a Pontiac GTO Ram Air hood would that be a difficult turn to rap

[@SS-qn8tb]

in your professional opinion...what would be the best way to prep cracked interior trim before wrapping with this product?

[@sparkyp6859]

Hi Christian oh, great videos, I have a question about how you would wrap a mirror if it did not have a removable cap. Would you wrap around all the edges that go into the mirror or would you use knifeless tape and stop of going around the edge, thanks

[@andiarsalam9908]

nice.....thanks brother...

[@vicksmoka]

good stuff

[@dankodasic2203]

how is wrap resistant on the sun?

[@vikingshpvs465]

Bro you sound like matt Damon. Love ur video g.

[@OatesSteve]

To wrap my spoiler & my side View mirrors can you suggest where to purchase the squeegee and what size I should get, Do you suggest 3-D, 4d, 7d ? ,, What is the best rap to buy for outside the car? Any hints what brands are the best quality? Thank you for the video I’m sure it will help when I do this project. Steve

[@abdullatiffadam589]

Good job brother.

[@sambajazz69]

Thank you very much. I almost everyday watching your video. Can I ask you one thing? Grand cherokee side mirror, Can I do this? Grand cherokee site mirror is so difficult to me T T

[@SimiTravels]

at begin i thought it won't come any good.. i was wrong , actually a good job

[@MachineKing]

pretty rough start but good job in the finish

[@emmanueljensen604]

nice eclipse brother!!

[@mikele1133]

Thank you very much for your share smart.

[@thebardock6785]

I had no idea about post heating

[@vxtwist6325]

hi there. how much wrap do you think you needed for both mirrors

[@evoquesquad2015]

What Carbon did you used 3D

[@TheChromeCannon]

Know having extra material is needed but seems like this much extra is wasteful? Turned out great ether way love the Vids and explanations. Helps huge

[@valmiralimi9165]

Hello your video is perfekt but can i know why my vinyl in 1 Week on the sides it is detached i musst to do more with the phone? or what Thank you very much :)

[@enriquemarin4945]

Thanks for explaining everything not to do