For a touch less car wash here are the steps as shown. 1. High Pressure Rinse 2. High Pressure Soap - Leave for 2-3 minutes 3. High Pressure Rinse 4. Splatter Wax - Leave for 1 minute 5. High Pressure Wax 6. High Pressure Rinse 7. Spot Free Rinse This method is similar to Autoglym polar series.
@sasodcfred2 жыл бұрын
Very nice video! Thanks from Skopje, Macedonia! P.S.: Good music choice :)
@themachine99993 ай бұрын
That’s the car wash on cooper street I use that regularly lol 😅
@lojosol5 жыл бұрын
the brush is OK to use so long as you first blast the thing with high pressure water to get any dirt off the brush, and secondly you DONT want to go in circular motions with it on your paint. straight lines front to back is best. this way if there is any residual dirt in the brush and it scratches your paint, the scratch is way less noticeable than a scratch that appears in a circular motion
@duboisprowash5 жыл бұрын
Thanks for your comments. We couldn't agree more - giving the brush a good clean before use it a MUST! We also recommend the presoak and high pressure soap option is used to soften or remove any dirt and grime stuck on the vehicle's surface. This will also prevent scratches. A clean brush, used in any direction should not scratch the paintwork.
@rjsahm58804 жыл бұрын
prowashonline that’s incorrect. You will NEVER get all of the dirt out of the brush because people often clean their wheels with it and they drop it on the ground. The brush WILL scratch most of the time.
@koioo24 жыл бұрын
@Srt _ i agree with you 1000 %
@adelaideautowashes4 жыл бұрын
@@rjsahm5880 Those guys are experts, they made this equipment. This isn't to be rude, but if you had some knowledge in the car wash industry you would know that _good_ foam brushes are made out of a very delicate material. Those that say the material is extremely rough are delusional, unless it's a broom the owner fashioned into a foam brush. Foam is constantly being pumped through the brush for optimal lubrication, similar to bucket washing at home with a microfibre wash mitt and a foam cannon attachment. A good quality, well maintained brush won't scratch the paint. It was designed with that in mind. However, some people treat the brushes like crap by misusing them, cleaning really disgusting parts of their car with them and just throwing them on the ground.
@milesparris4045 Жыл бұрын
@@rjsahm5880 The brush material won't hold grit and dirt, and it's softer than your paint so it won't scratch it.
@bobcasteel78114 жыл бұрын
I agree with pressure washing the hog hair brush. All the chemicals are specially formulated and diluted in a mixing tank to give you a beautiful shine. Try not to let your car get really dirty before washing. You don’t want to scratch your clear coat!
@kcwdiary5871 Жыл бұрын
After the spot free rinse, should I dry the car or is it okay to drive off without drying the car
@duboisprowash Жыл бұрын
It's entirely your choice. Some people prefer to move into the vacuum bay to dry off their car using a microfibre towel, while others who may be time poor may just drive off the site.
@milesparris4045 Жыл бұрын
The whole purpose for the spot free rinse is so it will dry without spots. It's purified water. The best way is to get the car clean, use the spot free rinse top to bottom, then pull it out into the sun to let it dry. If it spots, their filtration system is bad.
@youhuixue2494 жыл бұрын
Hey just 2 questions for the waxing part do you have to dry up your car first before applying it or doesn't matter? and btw how long do you leave the wax soaked in your car before rinsing it?
@Lol-ub8yh4 жыл бұрын
Idk
@yungboibutter22303 жыл бұрын
Nah the rules that i use that work is 1. Pre soak 2. High pressure soap 3. Wax 4. High pressure rinse 5. Spot free rinse 6. Dry with a microfiber towel to prevent water spots All those steps just go after another quick and easy you don’t have to let anything sit just make sure you get the whole car. Oh and never use the foam brush especially if you have black paint it will almost always leave swirls or scratches but it’s your car you do what you think or feel is right 🤷♂️.
@yungboibutter22303 жыл бұрын
Also If the self service has a tire/wheel cleaner be careful to not get any of that on the paint.
@Fam-qk4si Жыл бұрын
this would cost $25-$30 to do this at my local self service wash spot!
@duboisprowash Жыл бұрын
Unfortunately, the pandemic has caused this. Price inflations have affected all raw materials, freight and exchange rates across the globe.
@Brian-kr7bw2 жыл бұрын
i just use pre soak, high pressure soap, high pressure wax, spot free and then drive off and let it air dry
@hologammer11333 жыл бұрын
It was more or less a pre wash lol
@extremeXmetal666 Жыл бұрын
Never use the brush they provide, you will get swirl marks! Bring a leaf blower or micro fiber cloths to dry your car after rinsing. Otherwise you risk getting water spots.
@duboisprowash9 ай бұрын
Thanks for your comment. The method used to wash your car in our self serve bays means the brush is clean and well lubricated to clean the surface of the car without causing scratches. Talk to the attendant on site for further info and instructions
@jamessmith-wx9qe3 жыл бұрын
wow u r using brush :o
@ricocjohn Жыл бұрын
You missed the top
@sun6v5462 жыл бұрын
👍👍👍👍👍👍👍👍👍👍....................😜😜😜
@brian34224 жыл бұрын
This video literally spelled tires “tyres”. I’m out. wow....
@astina75744 жыл бұрын
it's spelled correctly...
@brian34224 жыл бұрын
I stand corrected. My bad. I had no idea this was also a correct way to spell tire.
@astina75744 жыл бұрын
@@brian3422 no, it's the only correct way to spell tyre (british english aka just english).
@kevin.argueta4 жыл бұрын
Like colour (British) and color (American)
@Ownage4lif314 жыл бұрын
Lol you're probably American. You'll probably be triggered when I type fiber instead of fibre