How to: Weathering Master Tutorial | Tamiya |

[@alainkimtia408]

The camera is too far from the action, can't see any details at all. Please zoom in. 😊

[@HearnsHobbiesMelbourne]

Sorry, what did you want to see more detail on?

[@Jester2189]

The whole thing. Didn't even looked like you did anything

[@entity404-nr8um]

I thought it was fine

[@SolveEtCoagula93]

I'll be honest - it didn't show up too well on PC monitor - but that's probably more due to my monitor! However, based on your demo I got some soot for a battleship I'm building and they do work extremely well and I'm pleased with the ease and flexibility with which they can be applied. Thanks. 👍

[@HearnsHobbiesMelbourne]

Glad it was helpful. Thank you for watching!

[@BladeRunner3x]

At what stage of the model build do you weather with those pigments? At the end? Do you preserve it somehow?

[@HearnsHobbiesMelbourne]

Weathering usually happens towards the end of the build. Clear coat can be used to seal the finish although it may darken as the pigment will absorb the clear and saturate the colour. Try thin coats of clear rather than a heavy coat to preserve.

[@davewilliams64]

just bought sets A,B & D, looking forward to try them out. thanks for the instructions

[@HearnsHobbiesMelbourne]

Have fun! Let us know how you go.

[@urielcoria6511]

10:16 after the flat clear does that mean it’s water proof? Or will it still rub off when it gets wet?

[@HearnsHobbiesMelbourne]

After flat clear the finish is sealed. As long as the clear covers everything it will be water proof.

[@urielcoria6511]

@@HearnsHobbiesMelbourne ok thanks I was wondering if it would rub off thanks very much!

[@HearnsHobbiesMelbourne]

It depends on how thick the clear is. Even paint rubs off if handled enough.

[@urielcoria6511]

@@HearnsHobbiesMelbourne ok I made sure to use multiple coats.

[@lilamari8591]

Question, would it be okay to apply any type of matte finish spray after weathering with tamiya? I have krylon for instance. I wanted to make sure before moving forward with it.

[@HearnsHobbiesMelbourne]

You can mist on thin coats of clear to seal the weathering. I don't know Krylon so do a test before using it on your model. Be aware that the weathering may darken after clear is applied as it absorbs the clear, making the finish more saturated.

[@lilamari8591]

@@HearnsHobbiesMelbourne Thank you! I did a test and everything turned out really good after spraying it down.

[@_walruseater]

@@lilamari8591came to ask this, thanks for asking for me! 😊

[@RonyTheRhombus.]

Thanks for the video! I really wasn't sure how to approach the weathering kits befor ethis

[@HearnsHobbiesMelbourne]

Glad you found the video useful!

[@elginG80]

Newbie Question: I just received this set and the instructions mention “semi wet” applicator, yet I can’t find one video instruction of anyone touching base on this. All videos show the powder applied right onto the model. Also the powder is hard and you can’t just scoop it off. Okay so do I need to break the powder down? Does the model or the brush/sponge tip need to be semi moist? Anyone with a experience are more than welcome to respond, thanks in advance.

[@awawawaawawawa2321]

are these made specificaly for modeling? ive actually tried working with powdered pastels, and charcoal and from my experience they tend to rub of the kit really easily. Also sometimes fingerprint imprints are brought out when applying the medium.

[@HearnsHobbiesMelbourne]

Yes, these are designed to help with modelling. Powders need to be fixed in place with pigment fixer or thinner and then sealed with flat clear to make them permanent.

[@NosferatusLair]

@@HearnsHobbiesMelbourne Can these be used on clothing, cloth etc. I have 1/6 scale military figures and also metal guns can they be used on cloth and metal? Do I need to put so.ething down on them before using these?

[@toosmooth6124]

When using pastel seal them and then you can put another pastel layer on then seal again each coat light coats. I use krylon workable fixative

[@jammer9300]

Thanks for the instruction video, just bought the desert A one for my Warhammer 40k Imperial Guard Desert themed tanks!

[@HearnsHobbiesMelbourne]

Thank you for watching a glad I could help!

[@adamfox1669]

Thanks for sharing this, I’m a big fan of Tamiya modeling supplies.

[@HearnsHobbiesMelbourne]

Thanks you for watching! Tamiya product always works.

[@insertfunnyjoke]

My only real question is will the weathering hold up while being handled and held? Or will it start coming off quickly?

[@HearnsHobbiesMelbourne]

The weathering will rub off with constant handling. If you are making gaming pieces that are touched all the time then seal the weathering with a clear coat.

[@Bean_Soup]

@@HearnsHobbiesMelbourne would giving the job a top coat afterwards prevent the weathering from being rubbed off?

[@Ticklescream]

Just started using these, and I have to say visually it looks great in person, but I am having trouble getting the detail to show up for the camera, any tips for that besides being more aggressive with the application?

[@HearnsHobbiesMelbourne]

Photography is tricky as it relies on lighting to be correct. strong lighting helps. Otherwise, increase the color contrast of your weathering. Similar to the high contrast painting that wargame miniature painters use to increase details. A little practice and you will get the hang of it.

[@casvalrel8263]

Ok this vid has come in handy! I bought a set last year to try it but was always curious about it. Now I want to ask, what sort of topcoat or clearcoat can I use to seal this in?

[@HearnsHobbiesMelbourne]

Glad you found the video useful! Any clear is fine as long as it is applied in thin coats. Sprayed clear is the best way.

[@yortsemloh1156]

I use a very tiny cotton swap for mine and it works very well for the portholes on ships.

[@HearnsHobbiesMelbourne]

Thank you for your tip!

[@skyrider4789]

Thanks for the video. Wondering if there's any oil or some kind of binder to these or are they just powder? Never mind. I just heard you say it has wax. 👍 Everyone complaining how far the camera is, I just zoomed in with my touchpad (or you can zoom in with your browser) and can see the difference.

[@HearnsHobbiesMelbourne]

Thank you for watching and glad you found it helpful!

[@sayyidabdillah9205]

Is it okay for me to topcoat this afterwards?

[@HearnsHobbiesMelbourne]

Yes, you can topcoat over this. Make sure you apply thin coats.

[@gmnemonic]

how are these any different than make-up compacts?

[@HearnsHobbiesMelbourne]

The color palettes are betting suited to scale modelling

[@GMotisi]

Im sure they are. These are prob really easy for people who don’t care to mix their own colors, but if they are just color shade differences, then it’s just a matter of finding the correct matte eyeshadow palettes and mixing them to your desired color.

[@car7795]

ive always found it easier to use my finger instead of the brush that comes with the kit

[@HearnsHobbiesMelbourne]

Fingers are good too! Thanks for sharing!

[@vintageludwig]

Are there any rattle cans that work well to lay the base coat before the weathering? Only wondering bc I cant really invest in an airbrush setup at the moment.

[@HearnsHobbiesMelbourne]

Yes, any model paint rattle can gives a good result with some practice. The Tamiya and Mr Hobby cans have always worked well for me.

[@lazydrain]

how do I seal it? will a topcoat work?

[@HearnsHobbiesMelbourne]

Yes, you can use a thin coat of topcoat to seal it.

[@Larkinovic]

Is there any way to seal in weathering

[@HearnsHobbiesMelbourne]

Yes, spray a clear coat or varnish to seal.

[@Larkinovic]

@@HearnsHobbiesMelbourne I used these weathering kits on a model before and when I clear coated it, all it did was wash away the weathering. I was left with the weathering warping away from its applied location. Could you tell me what you did exactly to successfully seal in the weathering along with the paintwork?

[@HearnsHobbiesMelbourne]

The clear coat needs to be sprayed on in thin coats. Seems like you sprayed a heavy coat that lifted and pooled the weathering. Dust on the clear spray.

[@chickenwing3961]

is there much of a difference betweeen the Orange Rust on Set C and The Rust on Set B.

[@HearnsHobbiesMelbourne]

Yes, the rust in set B is brown, like old rust. The rust in set C is orange and looks like fresh rust.

[@StarWarsJay]

Just bought pack B. No idea how to use these things, so thanks so much mate for this video.

[@HearnsHobbiesMelbourne]

Happy to help and thank you for watching!

[@StarWarsJay]

@@HearnsHobbiesMelbourne all good mate :)

[@haiqaliskandar7056]

Hey, what type of set for aircraft? Like for the engine and so on

[@HearnsHobbiesMelbourne]

For jet engines Weathering Master D has the colors for burnt metal and oil. www.hearnshobbies.com/products/tamiya-weathering-master-d

[@haiqaliskandar7056]

@@HearnsHobbiesMelbourne thanks :)

[@quizongilad]

I need to know, how to re-wet the weathering master.

[@HearnsHobbiesMelbourne]

Sorry, I don't know what you mean.

[@janlim0916]

Did you put any coatinc on it before weathering?

[@HearnsHobbiesMelbourne]

There was no coating or clear applied to the matt green paint before weathering. A matt surface will catch the pigment more than a gloss surface.

[@nikonbosse5920]

Can this be mixed with water or thinner? Something like Tamiya accent color/acrylic...

[@HearnsHobbiesMelbourne]

Sorry, I haven't tried any solvents with the Weathering Master as yet so I cannot advise.

[@nikonbosse5920]

@@HearnsHobbiesMelbourne I see. No problem. Think I'll experiment a bit

[@VICmAN88]

Will this work on metal model?

[@HearnsHobbiesMelbourne]

Yes, this will work on any surface but like any finishing product, it works best on a matt surface. The matt surface helps to hold the product.

[@VICmAN88]

@@HearnsHobbiesMelbourne cool i may test it on a sample surface and maybe scuff it a bit :) thank you for the quick reply 😀 🤘

[@youknoweverything7643]

You should have used a paint brush and cotton swabs so you don't cross contaminate the powders cuse you used the light tones and it was still grey like black powder off the first set. I use cotton swabs and paint brushes so I don't cross contaminate my powders and get the effect that it is supposed to give you

[@HearnsHobbiesMelbourne]

That's a great suggestion. I work like an emotional artist and like to mix up my mediums but that is my style.

[@flips300021]

Thank you for this video Very much appreciated. 🌟 I have bought all 8 of the sets. They are pretty awesome. I also downloaded and printed a pretty neat 3D print file of what is called "Tamiya Weathering Station" from Printables. And it is free too! It has 8 stepped slots at the back for all the sets and also 4 Square holes at the front for your Panel liners, etc or whatever you want to put in. And 6 holes on the side for brushes, etc. It took like 6 hours to print, mind you! LOL. On my Creality K1C. But it is worth it. If you have a 3D Printer, have a look see. I can highly recommend it. 👍

[@HearnsHobbiesMelbourne]

Thank you for your feedback and suggestion!

[@cenz_war_minis]

Hi, i can use Tamiya Weathering master After top coat? Great video

[@HearnsHobbiesMelbourne]

Thanks for watching. Yes, the Weathering Master will attach to any surface including top coat. It will grip better to rough surfaces such as matt top coat or any matt surface.

[@cenz_war_minis]

@@HearnsHobbiesMelbourne Thanx. Now i try on my Sniper model 👍😉

[@astraea2279]

You video just helped me decide to actually get these, thank you!

[@HearnsHobbiesMelbourne]

Glad I could help and thank you for watching!

[@ken-jf4lv]

Need to zoom in as you demonstrate how to use.

[@HearnsHobbiesMelbourne]

This is an older video, we will probably do an update at some point! Thank you.

[@tomiee862]

How do you removed the said Weathering effect if I didnt like it and apply a different one? do you just wash away with water or something else?

[@sickman5236]

Yeah water or thinner with a damped Qtip

[@HearnsHobbiesMelbourne]

Yes, water with some dish detergent, and a rubber eraser can be used to remove the effect.

[@OzScalemodeling]

The Packs should come with an applicator for each color.

[@HearnsHobbiesMelbourne]

Yes, extra applicators would have been handy but it is easy enough to use brushes, cotton buds, make up sponges and other implements to apply.

[@corradolaccetti1209]

Most interest your tutorial

[@HearnsHobbiesMelbourne]

Thank you. Glad you enjoyed the tutorial.

[@wonderwend]

Proceeds to put a dirty applicator in the white and ruin it 😂

[@HearnsHobbiesMelbourne]

The stuff we do to make an instructional video.

[@izziewolf2834]

Im broke so imma see how dollar store makeup would do as an alternative 😂

[@HearnsHobbiesMelbourne]

Good luck with that.

[@izziewolf2834]

@@HearnsHobbiesMelbourne Alright so I got around to trying it and it works suprisingly well.

[@gmnemonic]

@@izziewolf2834 there is no luck to need. this comment confirmed my suspicions. it is, in fact "make up", that should not be used on skin. I work in an industry that deals with such things, and before he even spoke i was like "this looks like a M*A*C color palette", then i saw the brush and facepalmed my brain into oblivion.

[@BodisRobert]

Amber Heard loved this video

[@HearnsHobbiesMelbourne]

Really?

[@Gabriel4Drummer]

Without zoom I can see shit :)

[@HearnsHobbiesMelbourne]

Great to know.