How to Wire a 150CC Chinese ATV- Step by Step- Complete Wiring Harness- GY6 Engine.

[@kylenunnelley1482]

Bro I want to thank you so much I have been working days on it I messed up the wiring harness trying to deduct all the stuff that I don't have in it because it was a mess that it all came with I knew where everything went except for that black wire I appreciate you so much you explained it in detail I definitely shared subscribed and will definitely pass it on

[@brokemexicanreviews]

I am so glad it helped, I have been there myself, getting the wiring correct can be such a pain.

[@kylenunnelley1482]

I don't think the black and yellow striped wire I had was ever hooked up because I can't get positive or ground continuity when cranking or just power at all when hooked up to the battery now the green is ground and you said black to Black in the video so I'm not real sure what the black and yellow striped wire is or where it goes but it definitely doesn't activate the coil and it definitely doesn't have any sort of juice at this time to the ground side or to the hot side so I'm going to take that black wire and run it from the ignition switch to the primary side of the coil and I should get spark back

[@Dave-ey3nd]

I am so thankful for this video , ive had so many problems with my 150cc tao, and i have so many questions..i have another wiring harness coming saturday since i burned up the last one.. ! Thank you again for posting ..

[@brokemexicanreviews]

I have gotten a couple quads where ppl burned up the wiring harness after they replaced…both was because they didn’t install the grounds.

[@remidad8211]

finally someone made a video of the gy6 engine thanks alot man .

[@brokemexicanreviews]

Np. Please make sure to subscribe. My IG is in the description if you have questions.

[@rickraw7177]

How do you bypass the brake switch do i just connect the two wirs going to it together

[@brokemexicanreviews]

Green/yellow wire and black wire coming from the harness out the front need to be touched eachother. Please make sure to subscribe. Thank you.

[@meadescarduzio2373]

Hey just saw this video. I have a gy6 125cc. How did you wire the ignition coil? I have a two prong coil, one prong goes on the coil, the other wire is a circular wire connection. How do these connect??

[@brokemexicanreviews]

As long as I’m understanding you correctly…The other wire is just a ground. If you have IG you can send me a pic and I can tell you for sure

[@Threshold527]

outta all the Videos i watched this one helped me get spark to the plug. Thank you

[@brokemexicanreviews]

No problem. Glad it helped. Please make sure to subscribe. Thank you.

[@mafia9597]

I need your help i don,t have spark to now wiring but i have spark on coil 2wirey have There is electricity and coil heats up

[@shamicaemory2718]

Sorry for the long post but based on the answer i receive from you i was thinking i need to send the harness back to amazon maybe the cdi box is faulty or something I install everything just as you did but you had spark when you was done and i didnt LOL!! Thanks again in advance for all of your help. MAY GOD BLESS

[@brokemexicanreviews]

If you have Facebook or IG you can send pics

[@darrelmoman7641]

Do that wiring harness Have a socket for a Electric carburetor

[@brokemexicanreviews]

I’ve been asked this question, I’ve never messed with an electric carb. Sorry about that.

[@angiea3220]

Excellent video first off, but I have a question, I have a 150cc coolster, I bought the 40.00 harness, there's no wire connection for the electric choke and I don't have fire to the plug, any ideas?

[@brokemexicanreviews]

Thank you. I really try to help when I do these DIY videos. Do you have instagram? My IG is in the description. If you could message me on IG a video of how you are starting I could help you better?

[@angiea3220]

@@brokemexicanreviews I don't have Instagram im sorry

[@angiea3220]

@@brokemexicanreviews I wasn't able to get the cover off the stator to change it. Can that have anything to do with fire to the plug, I got choke wired in.

[@brokemexicanreviews]

I typically don’t replace the stator…I just hardwire the old stator into the new wiring harness. Are the brakes engaged or bypassed?

[@angiea3220]

@@brokemexicanreviews the wires didn't line up as far as positive and negative so they aren't hooked up

[@PrestonWeber-b9u]

How do you wire in the choke? Bought a coolster 150 has a carb with a red plug unhooked

[@brokemexicanreviews]

The carbs I buy are manual chokes. The aftermarket harnesses that are sold online…the ones I install…don’t have a way to wire chokes.

[@PrestonWeber-b9u]

Awesome thanks for the quick reply. I’ll buy a different carb have a link for one?

[@brokemexicanreviews]

It is linked in the description of this video. kzbin.info/www/bejne/aancfJJjgrx7qdU

[@PrestonWeber-b9u]

Got it thanks. Ran into another issue. The valve cover has a line coming off of it but no where to run it too any ideas?

[@kalebmaxwell5261]

Can you use any Chinese kit pretty much for any Chinese atv? I have a redcat and not a lot of info out there

[@brokemexicanreviews]

I’ve done a few Redcats. Below is the video you want. I have a bunch of step by steps on this channel for carbs, starters, wiring harnesses, etc. How to Wire a Chinese ATV- Step by Step- Complete Wiring Harness- DIY kzbin.info/www/bejne/b2e3iWCNjtZ9oNU

[@kalebmaxwell5261]

@@brokemexicanreviews I used that video to do my taotao, wasn’t sure if I could use the same harness and do the redcat, (don’t see a brake pedal sensor for the harness, and starter has a female plug) appreciate you

[@brokemexicanreviews]

If you have IG, you can send me photos… And I can tell you for sure if you can use that harness or not

[@kalebmaxwell5261]

@@brokemexicanreviews no instagram I found you on fb tho

[@imualewis7826]

Damn bro, by far this is the best Tao rewire harness video on KZbin. Absolutely incredible, thanks bro

[@brokemexicanreviews]

Thanks man… That really means a lot… I’ve been putting in a lot of work to grow this KZbin channel. Please make sure to subscribe also. Thank you again. 🙏🏽

[@jrmys74]

i feel ya on ths bike, man! where can i find a good referrance for the vaccuum lines?

[@brokemexicanreviews]

You can use vacuum lines from oreilys or autozone…told your old one in and they can match the size for you. Make sure to subscribe please.

[@marcomrtz15]

Do you have a link to the wiring harness with all the parts?

[@brokemexicanreviews]

What size quad do you have? Would help if you can send me pics on IG? I can tell you exactly what harness you need.

[@Edwin-rp5ik]

@@brokemexicanreviews

[@Zylxz.]

i’m looking for a coolster 150cc wiring harness where should i get it frm

[@brokemexicanreviews]

The harness is linked in the description.

[@krislopez3913]

Thank you for your assistance brother real quick before I order it ...the link of the description is for 125cc 4 stroke engine....my eton is an RXL50 VIPER...IS THAT A 2 STROKE ? WILL MATTER ????

[@brokemexicanreviews]

kzbin.info/www/bejne/b2e3iWCNjtZ9oNU The link above is to a video I did for a 125 cc and under. The wiring harnesses that I use are linked in the description of that video

[@krislopez3913]

Ok gotcha . .un Chingo de gracias..keep putting out more content

[@brokemexicanreviews]

No problem and Thanks man.

[@matthewgwynn72]

Really good video. Not sure how to wire the coil in I have a green wire and a yellow and black wire that are supposed to go to it but the green wire has a circle on it like it wants to be grounded and the other wire has been normal spayed plug but the yellow doesn't match either one of the wires

[@brokemexicanreviews]

Thanks man. I didn’t see one posted so thought it would blow up…didn’t happen but gets decent views. If I’m understanding correctly…One is a ground…you can ground to a bare spot on the frame. Other connects to a terminal on the stud of the coil. If you have IG mine is in the description. You can send me pics on there. All products I use are linked in the description. Please make sure to subscribe.

[@matthewgwynn72]

@@brokemexicanreviews how can I send you pictures that would really be helpful

[@brokemexicanreviews]

My instagram is linked in the description of this video.

[@shamicaemory2718]

Hi maybe you can help me I also notice you respond back quickly to comments i wish it was another way we can maybe speak about my issue. I have the same 4 wheeler and i ordered the same wire harness i even took the old stator off and put the new one on just as you did in your video but when i got to the end and push the start button i didn't have SPARK, So now im trying to figure out why i have no spark any help would b DEEPLY APPRECIATED.

[@brokemexicanreviews]

I have helped a bunch of people walk through this. If you have IG or Facebook would be easier if you had pics. Also I have never had a bad CDI…I am almost willing to bet that is not your issue.

[@shamicaemory2718]

@@brokemexicanreviews Yes can i get your facebook name so i can send you pic man i been on it all day i just don't understand why i don't have SPARK. Thanks again and look forward to chatting on Facebook

[@brokemexicanreviews]

I linked my Facebook in the description

[@daleallen747]

Not the video I was looking for nevertheless you are informative . Thank you for the information.

[@brokemexicanreviews]

Thank you…and what video information are you looking for?

[@joshuawright3576]

I've got a gio 150cc Dirtbike that I'm trying to put almost identical wiring harness, except your ignition coil has 2 things to put out wires into. Video is pretty good. But definitely still struggling to figure this thing out.

[@joshuawright3576]

You connected a green and black to ur ignition coil, what do I do if I only have one thing to connect a wire to.

[@brokemexicanreviews]

If you have IG(or Facebook) and can send pics I’m 100% sure I can walk you through it. Also please make sure to subscribe.

[@brokemexicanreviews]

I never received your pics brother. If you can resend them I can probably help out.

[@joshuawright3576]

@@brokemexicanreviews Okay, Whats your Instagram?

[@brokemexicanreviews]

It’s in the description

[@NHT-tx9xe]

what wiring harness can i use for my 150cc atv as mine has got electric choke?

[@brokemexicanreviews]

You can use the same one linked in the description if you follow that link. Electric choke will have to be wired in separately. Make sure to subscribe I drop a lot of tool review and quad content. Thanks!

[@NHT-tx9xe]

Thanks mate. Where can I wire the electric choke onto? as in like where can I wire it to please?

[@brokemexicanreviews]

Do you have a link to the carburetor you are using? I typically just do manual chokes… I have done an electric choke on a vehicle so I’m fairly sure I can help explain it… And probably link a video that will help you

[@NHT-tx9xe]

I’m pretty sure it’s just a GY6 normal carb for it with electric choke.. yes please that’d be brilliant if you could thank you

[@brokemexicanreviews]

I looked it up and it looks like a of work. It’s a little different than a car. I don’t know if you would want to do this but for $15-$20 you can buy a manual carb with an air filter…then the only thing you would need to buy is a choke cable. The wiring harness I listed below comes with the manual Choke cable adjuster on the accessory/start switch. Or you can manually adjust the choke with your hand and not buy a choke cable.

[@JosiahHarris-o9f]

Can you use a 110 wire harness on a 150 ?

[@brokemexicanreviews]

No. 150cc takes a different harness than 110cc. Everything I use is linked in the description. Watch the video before ordering your harness. You need to know what size Stator you have before you order your harness. Please make sure to subscribe.

[@peterjohansson1503]

nice job, i have a question (statorwiring) 200cc

[@brokemexicanreviews]

Sure what’s the question? Also please make sure to subscribe. I drop a bunch of quad content as well as DIY and tool reviews.

[@peterjohansson1503]

@@brokemexicanreviews hi ok, I got a new wiringharness and the color doesent fit, stator has pink, red, yellow, green, bluewhie and the harness has yellow, bluewhite, blackred, white, greenyellow, the stator came whith the harness, hope u understand my issues

[@brokemexicanreviews]

Are they individual wires? And not the harness with the quick connectors? Actually either way your wiring schematic should go as follows. Blue-white to Blue-white Green to Yellow-green Yellow to Yellow Red to Black-Red Pink to White Don’t forget to subscribe!

[@peterjohansson1503]

@@brokemexicanreviews hi yes the stator os individual wiring but all the others is Quick connector exept the stsrtbutton and killswitch

[@brokemexicanreviews]

I edited my previous response to show you how the wiring should go.

[@dndproductions3986]

Will that fix an Baja At150ss atv ?

[@brokemexicanreviews]

Does it use the same harness?

[@MariaHernandez-xk4qq]

Gy6 150cc qmj157 will this wire harness work as well.

[@brokemexicanreviews]

I believe so. The link to this wiring harness is in the description. Please subscribe! 😬

[@pattybutterfield9648]

Have you ever put a new wire harness on a Tao Tao 250cc ATV? I have a new harness, cant figure out where all the wires go. Love your videos. Wished you were near Oregon and I would try to pay you to do it. Your videos are great.

[@brokemexicanreviews]

Yes I have only done one. The next one I do I plan to post a video about it. It was literally the exact same thing as I show in this video. Is yours an 8 coil stator? Also Please make sure to subscribe. If you have IG I can walk you through it? I’ve walked a few ppl through wiring harnesses on IG.

[@benshapiro8299]

Does the actual starter button barely move for you or does it click all the way in?

[@brokemexicanreviews]

I have had the same issue you are having…you overtightened the screws that attach the switch to the handlebars…please make sure to sub sir.

[@benshapiro8299]

@@brokemexicanreviews how much does that exact button push in though?

[@brokemexicanreviews]

All buttons push in a decent amount and should not be too stiff. If they are too stiff they are fastened too tight. They will still work they just feel like something is not right.

[@bobknobins6632]

Hey you seem pretty knowledgeable so I was wondering if you might be able to help me with my cheap Chinese harness that I ordered

[@brokemexicanreviews]

What cc is the quad and is it a Chinese quad?

[@Squier420]

Ok I followed everything you did I even got the same harness and a new spark plug but I can’t get spark

[@brokemexicanreviews]

If you have IG you can send me a video of what you are working on and I can probably help you trouble shoot it?

[@sofijagallo8921]

Remember in the video he connected the ignition coil to the 2 front wires but in the subtitles he states that was a mistake and ign coil connects more toward the middle/back of wire harness

[@Lookingforalowrankmoddedaccoun]

I’m new to the atv scene however I was curious if anyone could help out I purchased a 2020 coolster mountop 150cc model number 3150CXC I was told it needed a new wiring harness would this kit work for this atv ? Don’t dawg me please lol I’m new to this thanks in advance !!

[@brokemexicanreviews]

If you have IG you can send me pics of the engine and I’ll be able to tell you if it’s the right harness. My IG is in the description.

[@Lookingforalowrankmoddedaccoun]

@@brokemexicanreviews I did I have to wait for you to accept my invite it say thanks btw

[@angiea3220]

I followed your instructions exactly and I even got another harness and I still don't have fire, I have 12v on stator, cdi, regulator but nothing on coil, any ideas?

[@brokemexicanreviews]

Brakes bypassed or pressed in? Ignition set to run? If you have IG or Facebook I’m like 99% sure I can walk you through it.

[@angiea3220]

I only have Facebook and yes front brake locked held down foot brake

[@brokemexicanreviews]

Just add me or send me a message. I’m serious…I’ve walked like 15 people through wiring harnesses already. Easier when I can see a picture.

[@brokemexicanreviews]

Are you sure the quad is in the run position? Even if it looks like it is in the run position you have to push the button in to actually get it set to the run position.

[@angiea3220]

@@brokemexicanreviews how do I find u, I looked under ur name here and nothing came up

[@SK-tn2qn]

Can you please do a video on how to adjust the shifter linkage on one of these things please, i have a 150cc atv with the drive neutral and reverse but it sometimes pops out and hard to shift idk how to adjust the linkage

[@brokemexicanreviews]

I rebuild and resale quads and have yet to have this issue. When I do I will make the video and make sure to reply to this message so you know it’s posted. Also please make sure to subscribe so when I do make the video it pops up in your feed. Thank you.

[@SK-tn2qn]

@@brokemexicanreviews can you help me, my shifter hardly moves and bike stays in neutral first it was just in reverse no matter where i put the shifter now its just in reverse

[@brokemexicanreviews]

I had this issue before. The range of motion on the shifter wasn’t enough. Have you tried pulling it off. Turning the shifter a bit, putting it back on the shaft, retightening the bolt, then shifting?

[@SK-tn2qn]

@@brokemexicanreviews tried to no luck, even disconnected the linkages fully and tried to turn the shifting mechanism the linkage is connected to by hand no lucl, I did change the fluid, the old fluid came out the drain was grey and gooey new was like honey

[@brokemexicanreviews]

Yikes you might have bigger issues. If I do run into this issue on a future quad I will post and reply to this chat.

[@kingxiety5463]

My ignition coil is different why is this? It only has 1 pin connector and has rectangular connectors on both sides

[@brokemexicanreviews]

Can you add me on IG? Or Facebook? So you can send me a photo of your ignition coil. Link to my social media is in the description.

[@kingxiety5463]

@@brokemexicanreviews Sure thank you

[@kingxiety5463]

@@brokemexicanreviews I sent a DM

[@brokemexicanreviews]

Yes sir… I got it and I replied. Please make sure to subscribe to my channel… Thank you.

[@jazrol]

how about the light and signal?

[@brokemexicanreviews]

The head lights? And which signal?

[@jazrol]

@@brokemexicanreviews yup head lights and both front and back signals

[@brokemexicanreviews]

In the front of the harness there is a four prong connector for a single headlight… I believe the wires are green brown blue and white… If you have dual headlights then there are two connectors in the front that are green blue and white I believe. For dual headlights the connectors are 2 separate 3 prong connectors. As for turn signals… I know this quad was modified before I worked on it… It did not have turn signals… and the wiring harness that I ordered did not have turn signals either…the wiring harness I removed from this quad had lots of mods and splicing into it.

[@lanzethompson1577]

Thanks Vato you helped me a lot with this video 👍🤙🏋💪

[@brokemexicanreviews]

Hell yeah bro… Glad I was able to help. Thanks for subscribing. I do a bunch of quad builds and step-by-step tutorials on quads.

[@zuniga0331]

good work bro

[@brokemexicanreviews]

Thanks brother. Please make sure to subscribe. Also if you order parts use the link in the description. It supports the channel. Thanks again.

[@MartezBush-i3d]

I have a 150cc quad and I'm having the same problem please get to me if u can

[@brokemexicanreviews]

Do you have IG? You can send me a video of what it is doing.

[@lanzethompson1577]

Hey what battery did you use

[@brokemexicanreviews]

YTX7A-BS

[@lanzethompson1577]

@@brokemexicanreviews thank you

[@brokemexicanreviews]

Of course brother. Np.

[@allanmoffat5015]

7:30😂

[@brokemexicanreviews]

😬😬 Happy New Years bro.

[@marcoescobar8521]

y el kill switch?

[@brokemexicanreviews]

Are you asking how to connect or where to connect?

[@marcoescobar8521]

@@brokemexicanreviews i rewired my 4 wheeler the exact way you did but mine didn’t turned on 😅

[@brokemexicanreviews]

@@marcoescobar8521 do you have IG or Facebook? I have walked a bunch of people through this process just by pics.

[@thebrothers4311]

did this and still have no spark. I had it for a second, but it won't come back. I ordered the same kit from Amazon. One thing I notice is that when the start switch is in the off position it will still try to crank over with no spark. Could I have received a bad start switch? Please reply!

[@brokemexicanreviews]

Are you talking about the start switch on the handle bars or the ignition key?

[@thebrothers4311]

@brokemexicanreviews start switch on the handlebar. It has the run circle arrow, and the same image with an x over it. The machine will crank with that switched in either position

[@thebrothers4311]

@@brokemexicanreviews it's midnight here. I'll take a video tomorrow and add it to my channel then post the link here so you can see what I'm talking about

[@brokemexicanreviews]

Do you have the brake fully connected or bypassed?…also I don’t know exactly what yours looks like…but the switch with the arrows, did you push that button in?…side note please don’t forget to subscribe lol.

[@thebrothers4311]

@brokemexicanreviews subscribed 😆 I have the hand brake safety hooked up, so it won't even crank unless I'm holding the hand brake in. No foot brake. I'm getting ready to upload a video now. Check it out!

[@Dave-ey3nd]

That doesnt look like my gy6, and im confused about the redwire/ blackstripe.. there isnt one coming from my stator ..

[@brokemexicanreviews]

I have helped a couple ppl trouble shoot theirs. Do you have IG(or Facebook)? I could help you trouble shoot everything better with pics…if not I’ll do my best to do it through here.

[@Dave-ey3nd]

@@brokemexicanreviews yes ill jump on your instagram and send you some pics ..

[@brokemexicanreviews]

Sounds good. Thanks

[@daganyouds8431]

i have just put a harness on my 150cc n not geting a spark

[@brokemexicanreviews]

Replied on Facebook messenger.

[@dirtmcgirt8240]

Mine will not turn over. New battery and brand new harness. Reading 12.83v at starter solenoid and bench tested the starter prior to reinstall.

[@brokemexicanreviews]

Silly question but is the key on?

[@dirtmcgirt8240]

@@brokemexicanreviews not silly.. But yes. I even tried the key in both positions.

[@dirtmcgirt8240]

Jumped the solenoid with a screw driver and it sparked. Seemed like it tried to spin the starter but just made a click sound.

[@brokemexicanreviews]

Do you have Facebook or IG? You can send photos and I can help you better that way. Sounds like a dead spot on the starter.

[@armandopatane5343]

At least you feel better about doing a better job = as I would = and as you should

[@brokemexicanreviews]

Of course brother. I always give 30 day warranty with all the quads I fix and resale…unless a customer flips or wrecks it. Please make sure to subscribe.

[@mafia9597]

Do you have instagram

[@brokemexicanreviews]

It’s in the video description. I can possibly help.

[@benshapiro8299]

Messaged you on ig about an issue

[@brokemexicanreviews]

I am out of town right now. I’ll check it when I get back to the lodge