how do you alternate the sync of a diagonal light group? A criss cross light pattern...
@isaiahsideas28513 жыл бұрын
Where can I order one of those switches with the on/off and momentary together?
@Towman11513 жыл бұрын
Did you find out where to get the switch from?
@Justin-tp3lr3 жыл бұрын
@@Towman1151 I got mine on Amazon. Just make sure you get the correct one. Its either going to be a ground triggered switch or a positive triggered switch.. I went my wire color and it was wrong.
@Towman11513 жыл бұрын
@@Justin-tp3lr can you post a link to one I can’t find one
@Justin-tp3lr3 жыл бұрын
@@Towman1151 if you search around there are other types as well including hard wired types.
@derekthomasgriffin Жыл бұрын
Where’s this switch? I don’t see it on Amazon either…
@kc27165 Жыл бұрын
I have a 4 strobe setup and can’t get it to work right. What do you do with the other pattern select wires? If I connect as per the instructions that came with the strobes 3 of the 4 stay off.
@Towman11513 жыл бұрын
Where can I get that type of switch
@pablitorentas4217 Жыл бұрын
Do you sell the box separately ? I need 2 sets of momentary switches
@superbrightleds Жыл бұрын
We do, here's a link to our switches. bit.ly/3oirCFv
@carlosherrera91882 жыл бұрын
Can yo show how to wire the 10 mode controller please
@stevenmichaud87335 жыл бұрын
i have 8 mini strobe lights with only a negative and a positive wire coming out of the back, i have the same switch as your using in this video, i wired all 8 lights together negative to negative and same with positive wires, now i'm gonna wire the switch to the wires from lights, the white wire that comes out from the switch, if i touch that to the positive wires to the lights, will it change the pattern ??
@ToursofScotland2 жыл бұрын
How do you stop them desinking tho on 3 wire led strobes please
@superbrightleds2 жыл бұрын
For the 3 wire strobes, there isn't any sync wire so they could get out of sync with each other if they are on for a while. The only way to fix it would be cycle the power or change the mode.
@christofflemire88443 жыл бұрын
Where does the module get its power from
@TeGameTechGamerTips3 жыл бұрын
12v source from car either a fuse tap or a wire run straight to the battery with an inline fuse and or relay.
@christofflemire88443 жыл бұрын
The fuse is good Connections seem solid but the module has no power Where do I check for a power source to it?
@jasb68043 жыл бұрын
My LED on my truck doesn't flash any more, the light just stays on when switched on :( Simple fix or is it of to the auto electrical?
@jordancartercasemanager31965 жыл бұрын
How would you do this if you wanted to do a three light setup? I'd like to have two switches: Switch 1 activates the whites and some ambers. Switch 2 activates the same whites and some greens.
@DynoDieselWagon4 жыл бұрын
Works in sets
@412psekustomzllc75 жыл бұрын
Never use wire nuts in any vehicle application. Those leads absolutely should be soldered. I get that you figured for demonstration it would be ok to use wire nuts. But many people take demonstration videos such as this literally.
@superbrightleds5 жыл бұрын
We would absolutely recommend soldering these wires for a permanent installation. We added a note in the description to make that more clear. Thanks for watching!
@chriswelch94183 жыл бұрын
When you’ve linked both together with the sync wires do you still connect the second light with the program wire or not?