HOW TO WIRE UP VHX DAKOTA DIGITAL GAUGES FOR MY LS SWAP!

[@stytos]

It's interesting that much of what I search for (for a 1970 GTO), either you or Fast Monty's Garage are usually one of the top two search results. (Mostly commenting to appease the almighty algorithm.)

[@68maro13]

Thanks for the video!! I was not sure how to incorporate the temp sensor since its needed for the ecu (Sniper EFI), Bang @ 3:55 you solved my problem “use the 2nd sensor location for the Dakota”!! Great video!!!!

[@madrabbit9007]

I a 79 Firebird that I am working on and I would LOVE it if you had all of your Firebird videos in a single play list. Btw....that interior is amazing! Just found you and looking forward to digging through your old videos on this Bird.

[@tonyjackson9950]

ONCE AGAIN.... YOU KILLED THAT VIDEO. Thank you so much for this video. I have been struggling with installing mine on my 70 chevelle. You just helped me out. Much respect 🙌 coming all the way from Texas. Nothing beats GOSSE PERFORMANCE

[@goosseperformance1444]

Much appreciated and thank you for watching!

[@lanezaiden7192]

Instablaster.

[@mikevanson1335]

Nicely done thanks for the videos I'm doing a 70 Cheville 6.2 ls dash out ready to install

[@goosseperformance1444]

Glad we can help

[@fuzzy5101]

Oh snap thanks for uploading this! Know i feel comfortable knocking out the install

[@goosseperformance1444]

Glad I can be of help!

[@giovannisilva1307]

Hey man thanks for these great video , helping my friend installing DD VHX with ls3 swap , dont know were th get tach signal , just got BIM 01 02 , no luck call tech support said i need HP Tuners , can u tell me wish cable it is from ECU or anywere else , much appreciated it

[@sammyarmstrong2098]

I have a set of VHX in my 61 C10. All is good but the voltage gauge drops when I push on the brake, pulsates with the turn signal and drops to 10v when I turn on the a/c fan? I have checked voltage with a meter all is good, it's the gauge set up. I'm sure it's a ground issue but I am not sure where to start. These gauges were installed by someone else. There is a ground running from the box to the stall firewall under the dash. I'll take any ideas you may have. Thanks!

[@goosseperformance1444]

Start with a new ground to the battery but DD I believe has lifetime warranty

[@laneamejia1780]

Love the new logo!!!

[@alcc4964]

When you connected the parking light wire to the DIM terminal, how do the parking lights come on now since you are now using that wire elsewhere? Thank you

[@goosseperformance1444]

Should be two different wires use for those two ports

[@vincesuncine8073]

Great video. But I am still stumped. I have a 1981 TA with rally gauges. In the factory tab for the turn signals there are 2 wires for the left and 2 wires for the right going into factory tab. . Do I just pig tail a single wire then go into RTX control box. Same for the tach and fuel. The factory tach connector has 2 wires. And the fuel has 2 wires plus a ground wire. Any help would be appreciated.

[@goosseperformance1444]

should be one wire for tach on a ls swap , and one postive wire for t signals , other is ground

[@sandyphillips6913]

Do you know what the difference is between the vdx and the hdx,I have a 72 c10 with a 5.3 and 4l60e I am doing a new truck harness and was looking into dakota digital.

[@goosseperformance1444]

JUST MORE OPTIONS AND DIFFERNT STYLE

[@mrodsf150]

hey man, where did you get those black heater hose clamps?

[@goosseperformance1444]

Just a little black paint!

[@martinolivas319]

Hey brother I’ve watched your videos several times and I’m trying to wire up my 76 c10. I’ve got a BP Automotive stand alone kit for my engine and transmission, paired with Dakota digital gauges and the speedway 22 circuit universal chassis and fuse box kit. I’m not going to use several wires from my new fuse box since I’ve got the stand alone but I’m leary about cutting anything off until I’m 100 Since the Dakota uses all its own senders I shouldn’t need the ones supplied with the speed way kit am I right?

[@goosseperformance1444]

It just depends on what you’re trying to read on your dashboard. You can also have redundancy, depending on the gauge set up that you are trying to run or have read for example for an ECU.

[@tonymoose1062]

You got a part number for the adapter can’t find it on eBay

[@goosseperformance1444]

Email me

[@Hotrodding]

How did you wire the hot side for the check engine light? Thanks

[@goosseperformance1444]

@@Hotrodding just depends on what harness you are using don’t be afraid to use the talk shop service on the website, save you some headaches 🤙🏽

[@Hotrodding]

@@goosseperformance1444 thanks

[@Hotrodding]

@@goosseperformance1444 I have a bp automotive harness. Has a pink wire and a white/brown wire. The white/brown goes to the Dakota digital but not sure on the pink

[@vincevedernack6150]

Great video!! Do you recommend American Autowire or Painless performance. I'm restoring a 65 C10 and could use an opinion on which one you prefer.

[@goosseperformance1444]

American

[@MRQUETTE]

I thought with the ls swap when using the Dakota Digital all you really had to connect as for as sensors was the oil sensor that the Dakota Digital got its reading from the ls computer

[@goosseperformance1444]

Yes that if you use the Bim module but it you don't want the spend the extra money this is what you do

[@seanwalters1009]

Liked it, thanks!

[@chosen1639]

Where are you located I need my 96 impala ss did

[@goosseperformance1444]

vegas

[@chosen1639]

@@goosseperformance1444 came there a month ago on vacation

[@isaacgreen1599]

How do you use the blinkers that’s in the cluster already

[@goosseperformance1444]

Tap in to power from oe

[@michaelalmeida1630]

The LSx oil adapter for the Dakota Digital sending unit. Where did you get that from?

[@goosseperformance1444]

ebay, ict also has them

[@alexispatrick8970]

@@goosseperformance1444 i couldn't find the adapter, do you have a part number

[@goosseperformance1444]

@@alexispatrick8970 JUST ADDED A LINK IN DESCRIPTION

[@72FrostyOne]

New subscriber here, I have a 1955 Chevy I did a complete Dakota digital gauges setup on. It has a brand new LS3 stage 3 with a 4L60e transmission, I am a bit confused on the Tachometer connection, can you assist?

[@goosseperformance1444]

What ls harness

[@72FrostyOne]

Stock LS3 E38 computer

[@chrisgurican8745]

I'm new to the channel I have the same question I'm running a ls376 with a 4l70e with a US shift computer for the transmission. how do I connect the rear output shaft speed sensor to the gauge system ?? I'm located in henderson Nevada

[@goosseperformance1444]

@@chrisgurican8745 not sure if you watch the last two videos Chris but you should be running Dakota digital gauges this make the much easier for you

[@chrisgurican8745]

@@goosseperformance1444 I'm running dakota digital hdx gauge system. I'm trying to integrate my new American autowire chassis harness to the gm performance harness and a Us shift quick 4 harness

[@drptp5017]

what kind of adapter block off plate

[@goosseperformance1444]

Ict makes one

[@sandyphillips6913]

If I am runningva th 350 behind a 6.0 do I need to wire in the brake switch wire, I'm un sure any help would be appreciated.

[@goosseperformance1444]

sorry just saw this, but no

[@sandyphillips6913]

@@goosseperformance1444 thanks

[@michaelcarranza8640]

Did you use the OBD-II / CAN Interface from Dakota Digital?

[@goosseperformance1444]

Not for this set up bit have used in the past

[@michaelcarranza8640]

@@goosseperformance1444 I have yet to install my dakota digital gauge yet bit I got that interface as well and am hoping it makes it an easier install. did it make it easier for you?

[@goosseperformance1444]

@@michaelcarranza8640 yes

[@tonymoose1062]

Where did you get your Lsx adapter

[@goosseperformance1444]

JUST ADDED A LINK IN DESCRIPTION

[@johnathanjones1331]

Were are you located

[@goosseperformance1444]

Vegas

[@cedrichopkins1452]

Can you help me work on my car

[@goosseperformance1444]

@@cedrichopkins1452 have a service on the website we would love to book a call to assist your project

[@sandyphillips6913]

Thanks

[@MrGriffin23]

Good work! You are 😰😰😰 your but off. Lol

[@goosseperformance1444]

What ever it takes💪🏽

[@MrGriffin23]

Goosse Performance Been there. Keep grindin💪🏾

[@sammyarmstrong2098]

S