Yes!! I did it! Blender is easier than I thought? Thank you so so much for this, I really appreciate it!
@richlasma4 жыл бұрын
I'm glad you did it but nah bro it's giving me a headache right now, l'm trying to make a dress and oh boy.
@25games4 жыл бұрын
I am glad that I was able to help you and that you think that Blender is easier than expected :)
@LpsYcats4 жыл бұрын
@@richlasma Oh I'm sorry about that- God a dress much be hard-
@LpsYcats4 жыл бұрын
@@richlasma Hope you got it by now- 💖
@LpsYcats3 жыл бұрын
@Jerome Crosby These are scam comments! Do NOT use flixzone!!
@JustinLCooper4 жыл бұрын
Dude! I started learning Blender specifically to 3D print an Inter-dimensional-Tentacle-Monster Lamp for my bathroom. An here you go making my insane lamp dreams possible!
@andreijoshuatanarte11064 жыл бұрын
whatever you vwuanna
@25games4 жыл бұрын
too much slang? XD
@AlphAndroiD4 жыл бұрын
good information, but this "wanna" killed me every time :D
@blackswan63864 жыл бұрын
its funny how to watch stupid kids spelling like stupid kids hahaha just dumb
@blackswan63863 жыл бұрын
@BIG e yeah so funny bruh
@MotiviqueStudio4 жыл бұрын
Great tutorial! I was trying to figure out how to do a bundled object (like bundle fruit or bundled wheat) that would have various bulging deforms. This nails it!
@Lunaserenity2 жыл бұрын
This tutorial was a lifesaver. I have been re-learning 3D and this video solved this little niche problem i was running into. Thankyou so so so much!
@Axcia3 жыл бұрын
THANK YOUUUU I was trying to find sooo many videos on how to lower the poly count and NOTHING. You are a LIFE SAVER
@NebraskaJimmy3 жыл бұрын
Thank you this is a basic skill that all modelers should know. Very helpful and straightforward.
@TIJEY-BEG3 жыл бұрын
I browsed KZbin for so many videos of how to create rails and pipes and similar objects, and only your video helped me to learn it the proper way. You certainly deserve more subscribers. Thak you 25games. I wish you may assist me to improve my developing abilities even more, in order that I can create and launch my very own video games for my business.
@hugs_lover Жыл бұрын
I had problems with deleting objects after using they like geometry. Your video help me to solve this problem. Thank you so much!
@RobloxpocketGames3 ай бұрын
you the best to understand things so easy to follow you
@titaniumtank1663 жыл бұрын
Thank you for this I searched the internet for 4hours to find a way to unwrap it. thank you!!
@kalinaszek4 жыл бұрын
Thank you. Finally I can make ropes and wires withour going crazy.
@raetheonmitchell8386 Жыл бұрын
Really really enjoyed and learned from this. Thank you much. y\You are percise and clearly spoken.
@davids90274 жыл бұрын
Thank you for a clear easy to follow tutorial. Adjusting the circle resolution was the tip I was looking for.
@Dadwar_Real4 жыл бұрын
your a life saver thank you i have been looking for a while now.
@HarqoGames4 жыл бұрын
This changed my life
@_-nyxx-_3 жыл бұрын
yes
@daturahex3 жыл бұрын
Concise and clear. Awesome job !!! thanks for sharing !!!
@moontan915 жыл бұрын
tnx m8! very useful to create smooth curved surface!
@Tamarita112Hyuuga4 жыл бұрын
this is amazing, thank youso much for a very clear explanation! :>
@dartiv_div3 жыл бұрын
Sir this was beyond useful. Many many thanks!
@rbettsx4 жыл бұрын
Phew! At last, something on editing curves that doesn't wander off the point, which I can recommend to learners. Thanks.
@25games4 жыл бұрын
Thats nice to hear! Are you some kind of a teacher as well? (you mentioned learners)
@rbettsx4 жыл бұрын
@@25games I'm an ex stop-motion animator, using various CG applications since the 80's. I'm not a salaried teacher, (although I would like that.. I'm a bit old :) ) I help out at the local FabLab, and answer questions on Blender Stack Exchange, along with my personal projects. BSE's @moonboots recommended one of your videos to a user there, which turned me on to your channel. I think it's actually quite hard to find tutorial videos which concisely address the topic in the title, without wandering off into side-issues, or the entire prerequisite set-up. Also, you appear to be bothered to learn how to do something yourself, before considering yourself qualified to teach others, and if there are aspects you don't know, you ask! Good plan. :)
@heorhii91603 жыл бұрын
Thanks! Everything is clear and concise!
@omesant3 жыл бұрын
This tutorial was perfect ! Well explained and satisfying to watch. Thank you !
@clydecentino22544 жыл бұрын
Thank you for the tutorial! Your work is greatly appreciated.
@25games4 жыл бұрын
Thank you!
@mick09783 жыл бұрын
Thanks, straight to the point. Exactly what I was looking for doing a curved tree trunk. Liked and subscribed.
@Materiaform3 жыл бұрын
thanks a lot!! perfect for learning, I needed it!!
@aidenjohnson56244 жыл бұрын
Thank you man this is exactluy what i was looking for! liked and subscribed! :D
@25games4 жыл бұрын
Glad to hear that ! You are welcome!
@brittlecourage91934 жыл бұрын
Thanks for the info, I just started to play with this feature of blender recently to make neat hair. But I couldn't figure out how to lower the resolution of the vertical edge loops of the polygons. Helps a lot thanks.
@creativohugo3 жыл бұрын
thank you this was really easy to understand!
@green7724 жыл бұрын
Awesome video! Thank you so much for this tutorial :) You're making a huge difference in a lot of people's lives!
@sweetmemories79573 жыл бұрын
Awesome tutorial! Everything so simple and clear! You won a subscriber
@amarmurthy27834 жыл бұрын
very informative and clearly explained.
@pinkskin19983 жыл бұрын
I learned a lot. Thank you very much
@Nekotico Жыл бұрын
for converting the curv geometry to mesh, press Alt + C
@MidnightD3 жыл бұрын
I just started blender so I could have some potential into getting into a ROBLOX program. Ive been wanting to make tails, so this is helping!
@avtones74003 жыл бұрын
Thank you man!
@thewhisperchannel46844 жыл бұрын
Oh My Gosh! You explain it so well and so easy. Subbing for the future. You are the best!
@25games4 жыл бұрын
Thank you very much :) I'm glad to help you!
@PropheticGamesProductions4 жыл бұрын
Simple and effective ! Thank you !
@giulio56564 жыл бұрын
...great tutorial...thanks a lot!!
@manishwankhede173 жыл бұрын
Thank You So much ,God Bless You
@angelfam69633 жыл бұрын
I LOVE YOU THANNKYOU FOR THIS
@copper4382 жыл бұрын
can you like tell us which buttons to press
@tf24624 жыл бұрын
What a great work!
@asabedoriaatemporal4 жыл бұрын
You are awesome. Thank u, really!!!!
@StefSis3 жыл бұрын
Alt+S does not alter Weight, but Radius. If you hit N and go to the Sidebar, you will be able to alter Weight, which, though, doesn't have any effect on Curve objects.
@7ismersenne4 жыл бұрын
very helpful tutorial, thanks
@pajeetsingh5 жыл бұрын
I have similar software in my stomach. Runs every morning.
@25games5 жыл бұрын
Seems legit XD
@genericgoogleaccount89074 жыл бұрын
It’s called tacobell, plus it comes with a free taco.
@MikeMike-wc8on2 жыл бұрын
Thanks again )))
@RobCardIV3 жыл бұрын
: ) Arigatouuuu thank you buddy !
@cyberstorm6963 жыл бұрын
thank you a lot, it helped
@HOUPI_Games3 жыл бұрын
Thank you!!
@PuppetMaster-Blade4 жыл бұрын
Great Vid really helped me out alot. Im not sure if you have already but can you please do a "How to create teeth/mouth" or Maybe a "How to create eyes" tutorial as well?? Im really new to 3D modeling.
@25games4 жыл бұрын
Hey Puppet Master. Thank you for your comment. Are you searching a tutorial for high or low poly character meshes?
@PuppetMaster-Blade4 жыл бұрын
@@25games High Poly Meshes
@Toebiscuit4 жыл бұрын
Thank you for the fantastic tutorial, btw. =]
@morenoschweikle46673 жыл бұрын
great video!
@CekTopGaZa19884 жыл бұрын
Thank you!Great lessons!
@aviralkrishna97564 жыл бұрын
Thanks a lot for this helpful video
@mrchrislittle12614 жыл бұрын
Super thank you! this helped me alot! :D
@ACU1602 жыл бұрын
Omg this is so easy everybody has to make it so hard and such a big deal about it but not this one
@juillotine3 жыл бұрын
Thank you
@doxcho4 жыл бұрын
very helpful! thank you :)
@glennet96134 жыл бұрын
Thanks, on my 2.9 Blender the normals (fish bones) are off by default. Open the Overlays dropdown (next to the shading options at top right) and the checkbox is bottom left.
@sirihitti51014 жыл бұрын
thanks! Your lesson is very on time, I hope this helps me learn how to make beautiful hairstyles in Blender
@25games4 жыл бұрын
Hey :) Nice to hear that :) Cheers
@Staglaitor3 жыл бұрын
Thanks for video Can you extrude along a spline with sharp angle?
@25games3 жыл бұрын
Hey. I can't really imagine what you exactly want to do... do you want to create a spline with no tangets (hard edge)?
@JackMinardi4 жыл бұрын
Do you know how to reset the vertex weight back to 1 after scaling the whole curve? I scaled a curve up but want the bevel to still be the same size as the original bevel object.
@25games4 жыл бұрын
Call up the side menu with 'N' and enter the 'Item' slot. There you find Radius value. 'Alt+S' shortcut actually influence this Radius value here. Check out the other ancor point values for their Radius.
@JackMinardi4 жыл бұрын
@@25games Thanks!
@filippo77564 жыл бұрын
good video
@abuji1013 жыл бұрын
Thank you...
@quanli35523 жыл бұрын
Why you can bevel a curve in blender? Doesn't the bevel mean making fillet or chamfer to an edge ? What is the inner logic behind curve beveling?
@jurgenvantomme4 жыл бұрын
Interesting thank you
@Nina-qd6vf4 жыл бұрын
I use blender 2.79 because my laptop is outdated. But is there any way you can do this in blender 2.79? (Turning it to mesh)
@25games4 жыл бұрын
In Blender 2.79 you have to press 'Alt+C' to call up the 'Convert to' panel and select 'Mesh from Curve/Meta/Surf/Text'
@nguyenvietducbg3 жыл бұрын
thanks
@zer0par1dox473 жыл бұрын
Yes
@indiehandstudios57112 жыл бұрын
how do i scale point in the curve on a single axis? Alt+S scales all axis
@Rinkyu3 жыл бұрын
AHHHH 😭❤️😭😭😭👌
@pastelparrot48783 жыл бұрын
how do you like rotate your screen? i only can move from one side but i cant figure out how to move all around
@25games3 жыл бұрын
Can you give me a timestamp for a camera Rotation example?
@lorcantyler433 жыл бұрын
when i rotate using a ankor point it rotate the whole object rather than just the ancor? do you know how to change this?
@Atomic-toons002 жыл бұрын
Why i cant select target why
@gyriann16603 жыл бұрын
why i cant select circle as an object on my bezier curve bevel?
@25games3 жыл бұрын
Sorry, I don't know what you want to do exactly... ? Which circly do you want to select?
@gyriann16603 жыл бұрын
@@25games My bad, I picked the wrong circle not the bezier circle.
@FRSSTENG3 жыл бұрын
Thankss😭
@boitahaki Жыл бұрын
2:42 The "Alt+S" shortcut is not doing anything, I can see the tool creating the line and the cursor but no matter how I move it, it does not change the thickness.
@12nichi4 жыл бұрын
when I try 0:45 to select an objet, in my selector box dosen't show me anything, how can I fix it?
@25games4 жыл бұрын
Maybe you haven't created a second curve so far? Or maybe you have created an mesh instead of an curve. It is possible to create an mesh > cyrcle... but this will not work! It has to be curve > cyrcle!
@rinnyrr4 жыл бұрын
25games when I clicked on BeizerCurve, it gave me a flat circle and not what you got.
@RareKirbyStarBall23 жыл бұрын
2:53 Every girl who's watching this with a 3D printer: 😳
@Chelsea-jx1bi3 жыл бұрын
Just wondering how I then create more horn/vine shapes joining on to this mesh?
@25games3 жыл бұрын
You can create multiple curves but can't join them. If you want to do that then you need to transform the shape to a mesh and use join or boolean to combine shapes.
@vida83564 жыл бұрын
Thank u for the tutorial. How can I make a curve that looks like a capsule? I mean the start and the end of the curve to be sphere not like this one which is a circle..
@25games4 жыл бұрын
Hey. I haven't found a solution yet. Maybe I will handle this topic soon.
@vida83564 жыл бұрын
@@25games someone taught me to put an extra vertex near the end vertex and play around with the radius to make them more like a sphere(make the very last one like 0.0001 and the next to the last one 1). It's not really ideal but it made the result I wanted
@petertremblay37253 жыл бұрын
You don't need the circle just use bevel in properties and alt s to scale end point!
@25games3 жыл бұрын
Thanks for the hint! I will try this!
@petertremblay37253 жыл бұрын
@@25games You are welcome
@chekote3 жыл бұрын
When I convert to mesh it does not seal the ends like it did in your video. What am I doing wrong?
@25games3 жыл бұрын
You have 'Fill Caps' enabled? If so then I'm sorry because I don't have any idea why it is not working for you.
@boitahaki3 жыл бұрын
There is no "Object" option in bevel in my more recent version of Blender...
@25games3 жыл бұрын
Hey. I made a update video for that: kzbin.info/www/bejne/qaquYYesg91jbqc Cheers!
@boitahaki3 жыл бұрын
@@25games Thanks!
@improfilmimalev4 жыл бұрын
I already fail at the beginning: cannot see the circle object in my selection. :(
@25games4 жыл бұрын
Hey. Why you was not able to see it? Have you already solved your issue?
@darknessringo59894 жыл бұрын
The "circle" isn't a mesh object. It needs to be a curve object as well. If you click on the bevel/taper input field you will get a list of valid object you can select. This is the solution to your problem.
@ra68654 жыл бұрын
I got stuck after 1 minut :( my cirkel did not show up when using the bevel/obejct thing... :( i did what you did but without the circle, i just changed the depht. But how do i get volume so i can start modelling some details on to it`?
@25games4 жыл бұрын
Hey. You need the bezier curve + the circle. Select the curve, go to object data properties > geometry > Bevel > Object and select there the circle. Then you shoulg get volume on your curve. To edit the volume you need to do an rightclick on object mode and select 'convert to mesh'.
@ra68654 жыл бұрын
@@25games thanks alot!
@8bits52 жыл бұрын
How can i change the size in axis?
@maskstudio..79733 жыл бұрын
tnx,,,,
@luma74233 жыл бұрын
How to had a texture for a curve ?
@25games3 жыл бұрын
I'm not sure if it is possible to add a texture to a curve. Basically I would convert it to a mesh and then assign a material.
@lolabonita24604 жыл бұрын
hello circle is not showing in beval as a choose i tried every thing and nothing showed up what am doing wrong plz :(
@25games4 жыл бұрын
Hey. Are you sure that you imported an curve and not a mesh? You are able to create a circle Shift A > Mesh > Circle as well... But it have to be a bezier curve. Prss Shift A > Curve > Circle
@lolabonita24604 жыл бұрын
@@25games i imported a mesh instead of curve ty sooooo much
@einthony70333 жыл бұрын
tysm i now have a chance to get in roblox UGC
@protossscud84354 жыл бұрын
How to join 2 curves together to make it 1 ?
@justtadriian4 жыл бұрын
at me their orientation is wrong , how can i fix it?
@25games4 жыл бұрын
The orientation of whom? or of which object?
@timetraveler38064 жыл бұрын
This dude sounds like he has auto generated voice from those kids alphabet piano tablet
@amypond23483 жыл бұрын
why does mine not have anker points
@25games3 жыл бұрын
In Object Mode you don't have ankor points. Go to Edit Mode to enable editing (and anker points).
@amypond23483 жыл бұрын
@@25games I’m in edit mode. Mine doesn’t have that kind of arrow look
@25games3 жыл бұрын
Probably you have '2D' selected in the Object property section. Under Shape you can choose between 2D and 3D. When 2D is selected, then you don't see those arrow display.
@juicyrave4 жыл бұрын
its a helpful video and im thankful for that tho pls look up the pronunciation of bezier
@25games4 жыл бұрын
I will do. Thank you!
@malar24734 жыл бұрын
2:22 it wont subdivide for me anyone got any idea?
@25games4 жыл бұрын
Have you selected both ancor points which should be subdivided?
@malar24734 жыл бұрын
@@25games yes shift left click on the middle point of the anchor points
@25games4 жыл бұрын
mhm. I can't figure out your problem. I tried it again >> create new bezier curve > edit mode > select your wanted ancor points both > rightclick > subdivide. Which Blender Version do you have?
@malar24734 жыл бұрын
@@25games i tried again too and no luck and i have 2.82a
@worthit8264 жыл бұрын
bezier wont let me select my circle
@25games4 жыл бұрын
Hey. I can't imagine your problem. What exactly was your doing?
@worthit8264 жыл бұрын
@@25games i realized what i did wrong. i was using a mesh circle rather than a bezier circle. when using the mesh circle, it wouldn't show up on the object list when trying to bevel.