How to zero (virginize) any BMW cluster for retrofit or exchange?

Replacing a cluster in your BMW is not as straight forward process as you might think. Before trying to put used cluster into the car it has to be virginized. What does it mean and what happens if you just ignore that rule? Do different series (E, F and G series) require different approach or there are way more common things? How different is the process for retrofitting full digital 6WB cluster and half digital 6WA? If you are interested in those questions watch that video! I'm explaining difficult things in an easy manner, so everybody is able to understand the process until the end.
Timecode:
00:00 - Intro
05:10 - Disassembly of the cluster
06:38 - Soldering out the EEPROM
10:53 - Virginizing the cluster
26:40 - Assambly
BimmerDoc: Programming / coding / chiptuning / diagnostics / retrofit / BMW navigation update!
Contact information:
* FaceBook: BimmerDocComp
* Instagram: #BimmerDoc.Comp
* email: [e-mail]

[@fringuello67]

I am an IT technician and I purchased an F31 in 2018. Since then I have become passionate about the world of retrofits and coding. I have seen many video tutorials over the years but yours are simply fantastic. Congratulations for your preparation, professionalism but above all for your ability to explain in a simple and clear way, thank you very much. ps: in Italy I couldn't find ANYONE who wanted to teach me these things, not even by paying!

[@BimDoc]

Believe me I’m covering the bare minimum what is needed to work with your own bmw. There are way more things you need to know to become a real professional. If it’s possible to become professional in that field at all. The more I learn the more I understand that I don’t know so many things 😅

[@naskomitrov5456]

Hello Vladimir, I`m a big fan of yours because of your explanations and how easy it is to understand, also I`d like to watch your videos like you said for programming and everything at all, because I`m in Technical University and I should be learning Automobile Electronics but still I haven`t learn anything from Uni. Keep up with the good work

[@BimDoc]

I hope university will catch up soon ))

[@macmad6959]

What a great video, knowledge is key, and aspiring to learn the fundamentals required for which is a very technical task.

[@meysamdadkhah9236]

Hello Vladimir, Love your channel and all the great content. I just ordered my virginized 6WB cluster for my f26 x4. I am interested in a video with the coding steps required. I have experience with E-sys just need the steps to complete the mission. Thx

[@sametyucelsarihan6477]

I do the repair and programming of electronic modules in vehicles. But I want to master BMW. Your channel is very useful to me. I'm looking forward to your technical videos like this. Thank you Vladimir..

[@BimDoc]

Stay tuned for more videos )))

[@FMQ-Tech]

Man... what a cool video!!! So I learned that buying a new one is the best I can do, at least for my case. I have a G20 M340i, a used in good condition cluster goes around 400 in eBay and an additional 400 to virginize it in some local shop. A new one from a BMW dealer is 1200. So basically going used I will be saving only 400, wasting time, potentially having it broken and still have a used one. So yeah, I'll go for a new one. Thank you very much man!!!!

[@BimDoc]

You welcome!

[@vislocky78]

Great Job Vladimir!

[@chidichukwudi4223]

Just coming across ur video for the first time nd must say sincerely, u er simply the best. U completely broke it down. Please friend, in a bmw enthusiast, I would love to learn how to program nd code bmw cars, would so appreciate if u would train me in that regards.

[@BimDoc]

I do provide offline training. For more information join my new telegram channel t.me/BimmerDocChannel

[@jadantoon500]

Thank you again for the video please if you can make video of programming after virginizing 😊😊

[@unyimeakn9615]

Amazing video, I was wondering what soldering iron you are using? also what is the copper you are using to collect the rose alloys?

[@BimDoc]

What ever heatgun or iron What ever copper wick

[@kepmic]

As always GREAT tutorial, really very good job ! In topic of cluster reprogramming do you know if it is possible to reprogram F30 (6WA) USA cluster into EU one? I mean mls to kmh during setting a CruiseControl speed. Do you guys do such a things ?

[@BimDoc]

Yes it’s possible, but not so straight forward

[@kthanassis89]

on 6WB is very easy to change the miles to km

[@RayonsAutoDiagnostics]

Thank you sir, really appreciate you sharing your knowledge

[@BimDoc]

My pleasure

[@antonispk6760]

You are great at your work man !! One question, how do tou identify which chip is the eeprom from any board?

[@BimDoc]

You will figure it out with a practise. Because every cluster will have a certain eeprom type.

[@jean-bastienblanchard2362]

Thank you Vladimir for this video. I would like also that you make a video to explain how to code an used cluster after being virginized 🙂

[@BimDoc]

The procedure is same as shown in Esys for dummies part 2

[@user-tz4oz4vg2o]

Hi, as always, the video is interesting. Your opinion about the cgdi programmer copes with such tasks better than vvdi-prog

[@BimDoc]

There is it a single programmer in the world that will do all the jobs perfectly. In the end you will need many of those anyway

[@A7medology]

Hello Vladimir, I have just came across your channel and instantly fell in love, thank you so much for such great content, specially this one here, about virginizing the instrument cluster prior to retrofitting, now, a quick question if you please, do you know the codes for the EEPROMs on the BMW F15 (x5, Year 2017) instrument cluster? Or will any 8-pin EEPROM will work just fine? I bought a used car and the previous owner did a nasty job on the instrument cluster by removing the EEPROM all together (instead of virginizing it) and bridged the gaps with wires! Now I want to buy new EEPROMs and have my technician resolder them back to the board, but I want to buy the correct EEPROM, any advice?

[@BimDoc]

I’m afraid that cluster is useless now. EEPROM and FLASH have IDs and they should be identical. If you don’t have even the information from previous eeprom then that cluster can be used for parts and no more (

[@Mubmoh]

Great video explanation! Question, if you change clusters do your old keys work or does some further work need to be done?

[@BimDoc]

Keys are not connected with cluster anyhow in bmw. In VAG cluster is part of immobiliser system.

[@user-vz2ir1js7t]

Круть! Интересен подобный материал! Так держать, Владимир!

[@aldo5305]

Hello Vladimir, excellent channel content and tutorials. My F21 2013 cluster is in mpg . Cruise control speed is also in mph .Can cruise control speed be coded to kmh or do I need to swap cluster to kmh.

[@BimDoc]

When taking cluster from US/UK then some parts of EEPROM are in miles and has to be treated separately. So not so straight forward.

[@Ewgenij83]

Добрый день!! У меня к вам вопрос, у меня сегодня на g31 панель приборов сдвинулась в бок скорость всё ушло в сторону, что делать?

[@user-f10]

Hi, great detailed video thank you! Rose alloy with low melting point has about 25% of lead, you said they use lead free soldering in F clusters.. did you NOT use this rose alloy to solder it back, only to remove it?

[@BimDoc]

I always use rose alloy to desolder eeprom Then good cleanup with copper wick is needed And soldering back wo rose alloy. If you leave it there, you will have a lot of headache 🤕

[@user-f10]

@@BimDoc so you do solder it back with the same rose alloy you removed it?

[@BimDoc]

I always remove rose allow And solder eeprom back without rose alloy! Always!

[@lmb335is7]

Great video. Rather than solder the 95320, can't you use the socket on the board?

[@BimDoc]

With 95320 doable. But if you know how to solder it’s just couple minutes.

[@Bernard-zj1kx]

I have a BMW M850 XDrive. Year 2019. After purchase, everything worked. I went for chip tuning and popcorn making. Then I went to a mechanic who replaced the battery in the front of my car (technical) and did some digging because I wanted to have a BMW Me. Car from the USA and he came to the conclusion that he wouldn't do it. I picked up the car, the radio was Sirus (America), it was impossible to change the time, it was New York. I did a reset from the panel in the car. But what's most interesting. Previously, I had a different car sound with eco and switching to sport+. Now I don't feel any difference when starting the car. And there was a different characterization. The flaps open. and they are open all the time. Tuning has been undone. I called the dealership and they said that the flaps should open in comfort and sport+ modes. However, they are still open. The guy who previously converted from the US to the EU accessed my car remotely and doesn't know what could be wrong. I have a cable for remote connection. the steering wheel also behaves similarly in all modes. I have the impression that the car is in sport mode. Changing to comfort and eco does not cause any difference in the behavior of the car and the steering wheel works just as hard. The only difference is in sport+, where the car actually revs higher. I've read that people have various problems after replacing the battery. technical, but I haven't read about a case like mine anywhere. Please help.

[@washableaxe]

So cool! Would it be possible to flash completely empty EEPROM chips on the board (of the same brand and capacity of course)?

[@BimDoc]

Doable on E series, and not on F series

[@pillboy520]

Hi Vladimir, thanks for the video. I found this very useful! I just got a virginized 6WB from my seller. But, after installation and coding, maintenance notification pops and "reset impossible". Is is due to incorrect virginize steps? I am thinking to virginize it again and see if it helps...

[@BimDoc]

It’s difficult to say. If coding went through then it’s most likely not the Virginizing problem

[@partoems9376]

Hi, thanks for the intricate video. is it possible to change mileage of G7, 2020 model?

[@BimDoc]

Unfortunately at the moment it’s already possible to change mileage in G series also ((

[@HS-hw6mv]

Thank you for your informative video, I bought the carprog set from Aliexpress, can I use it?

[@BimDoc]

I haven’t worked with carprog Cannot comment on that

[@raicha88]

good. thanks a lot

[@adekunleogunjobi5198]

Thanks for the tutorial, now that the cluster is vriginised, I have a question, is it during the coding process that the vehicle's VIN will be transferred to the cluster?

[@BimDoc]

Correct, during the coding process

[@davediamond9441]

Fantastic video Vladimir. Unfortunately, my cluster broke and my mechanic temporarily put a non-virginized cluster (with very high mileage relative to the actual mileage) in the car. Neither the VIN nor the mileage were corrected on that cluster so neither of them match the car's VIN or true mileage. I'm wondering if the non-matching VIN may have saved me from having the DME and lighting control module being reset with the cluster mileage. Can you comment on this? If the mileage has indeed been reset by the cluster is there a way to fix this?

[@BimDoc]

Yes, if VIN does not match then mileage will not jump. But I have seen cases when it still did jump. So newer put used cluster to the bmw wo virginizing it.

[@davediamond9441]

@@BimDoc Vladimir, Thank you so much for responding. I have located a virginized cluster and will be installing that soon. I hope that you are right and that my correct mileage (very low) will be retained. I have watched a lot of car repair websites and I must say that yours is the best, most comprehensive, and professional one I have seen. Than you again!

[@husseinabdul-ghani520]

Can please tell us how to verginize old mgu. I am appreciating your effort.

[@BimDoc]

I’m afraid that information is jet not to be published 😉

[@e-boydtech9080]

hi, for the second eeprom 95320,(15:39) why you did not use the adaptor(clip) on the pcb? does the adaptor won't work? need to solder the eeprom on the eeprom pad?

[@BimDoc]

On 95320 clip should also work. But soldering does not take so much time but it guarantees 100% result

[@j1nnan702]

Hi could you help me regarding my car. So I got a cluster from a f80 and I want to install it in my bmw f30. I got the cluster virignised and plugged it in. I don’t have a most cable yet. But once I plugged it in there is a tamper dot but with my cars kilometres. What must I get done now? For the cluster to work between my car. I know coding is required and the most cable but I think the tamper dot should not be there? Did the person who virignize it didn’t clear the vin?

[@BimDoc]

If you code the cluster to your vehicle then red dot should not be present. If it is still present, then sometimes vehicle needs to go for a sleep. 😴 It dot is still present, then verginizing process is as not done properly. And fitting M series cluster is not so straight forward. Take that into consideration.

[@eugeneshutkov1120]

Прошу не много вашей помощи....Понимаю,что не по теме. Бмв ф10 2012 год 528 С блока JBE не выходит сигнал на открытие багажника(серый провод с зеленой полосой)... Вопрос: установлено ли реле в этом блоке,которое подает "+" на замок багажника?и если установлено,то подскажите пожалуйста какое?

[@BimDoc]

Не знаю как управляется этот компонент внутри модуля JBE

[@luv_xxx2770]

very very good can do video for bmw E series

[@BimDoc]

There was no E series with LCD cluster

[@vtalay]

Usefull info here. thanks for that. I tested out of curiosity :D. When the Mileage of Cluster is not resetted or is higher then the car's. It shows still the km of the car. And adds 5km to car's mileage every time car started. Car is a f10. not sure how would it be on other models

[@BimDoc]

I haven’t tried with non verginized clusters)))

[@novoznik1]

Поставил приборку 6wb сброшенную красной точки нет, вин мой, каждый раз включении зажигания +5км к пробегу

[@Lorand-pd1uk]

Hallo! i have a BMW F22 11/2018, i bought a BMW M2 Competition Cluster and got it coded correctly. I put the original Black Panel Cluster out at 48600 km...i drove 430 km with the new cluster...then i decided to sell the car and put the old cluster in....but it does not take the actually KM ( 49046) over...why is this? why dont give the car ecu the new KM to the old original cluster???

[@BimDoc]

Recode old cluster with esys

[@josejopez]

Amazing.

[@iamskoi]

Владимир, такой вопрос: а можно ли поставить приборку от донера, получить эту злощастную красную точку, а потом через какое-то время проделать показанную процедуру и обнулить приборку к нормальному виду. Меня эта точка совершенно не смущает, оригинальную приборку планирую оставить, а купленную потом продавать. По этому не хочется заморачиваться с прошивкой, т.к. в моем городе нет таких спецов :(

[@BimDoc]

С точкой пробег будет отображаться не корректно. И кодировать приборку под авто все равно надо.

[@mbusophakathi5253]

Hi , i got a full led cluster from 2022 bmw X3 Lci from a donor car. My car is Preface 2021 bmw X3 with digital cluster, i wish to retrofit the donor cluster into my car. Question: will your method in this video work on this cluster? Ill appreciate your help 🙏

[@BimDoc]

Verginizing will work But MGU cluster will not work properly on preLCO vehicle

[@davitrobakidze5839]

Обнуляю приборки также в гараже, теми же программаторами. P.S. научился у Тебя :)

[@BimDoc]

А пожалуйста

[@user-pf8wo1bi5c]

Здравствуйте. Приборку расширенную обнулили, привязали. Ошибок нет. При смене на режимы спорт, eko нет никакой анимации, только название режимов меняется. Что посоветуете? Перепрограмировать? G30

[@BimDoc]

Выровнять istep никогда не бывает лишним. Если там NBT Evo то анимация должна работать

[@DoshaYama]

Super, nagu alati!

[@mirondraghici5356]

Hi. Newer clusters use 35128wt, how do you manage to virginise it? i know they have page-id so cannot be erased..also when you manualy delete vin does it not require checksum correction? thank you

[@BimDoc]

Vvdi prog will not handle 35128 But one of my another programmers can handle it Subscribe to Instagram for more details IG: BimDoc.Official

[@pedrammahabadi4152]

Hi great video! I had my cluster changed on my F11 and now the milage first shows 9 miles before increasing to the correct millage (around 88k). Also on every ignition cycle the milage increases by 3 miles without driving it. Is this an issue with how it has been virginised by the seller or how it has been coded by the installer?

[@BimDoc]

It’s cannot be coded for somehow mileage auto increase I’ve verginized a lot of clusters and didn’t had a single issue of that kind. It’s hard to tell what is the problem.

[@CaseyE-bn3vk]

I have this same issue on my car, every time I turn the car on and off the mileage goes up anywhere from 2-60 miles on my odometer.. my odometer reads like 149,500 and my Ecu reads about 136,400. Do you ever get this figured out Pedra?

[@RS-em6qj]

Hi I bought me a new 6WB and my car is build 2018, do I need to code the cluster in the car or does it work plug and play ?

[@BimDoc]

Cluster replacement is not plug and play Virginizing and coding is needed

[@leonidasfoulides5428]

Здрчвствуйте ! На моей БМВ Е46 рестайл 2002года поменяли приборную паннел. Панель взяли тоже от рестайла 2004 года. Поменяли и на ней загорелись лампа отASC и ручник жёлтым цветом. Вроде кодировали . Пробег встал как на родной и без точки. Но лампчки горят. Мне сказали что это панель от машины с системой DSC. А у меня ASC. Поэтому и горят эти лампы. Может не правильно кодировали ? Или всётаки взять микрочип от родной и терепоять на другую панель .

[@BimDoc]

Если кодировали через ФА (а в вашем случаи ZSC ключь) то должно было помочь. Скорее всего не правильно закодировано

[@marwCZ]

When I buy new 6WA/6WB I need to also code VIN to EEPROM?

[@BimDoc]

Yes new cluster also needs to be coded!

[@plutonium2392]

Здравствуйте Владимир, сделайте пожалуйста видео о том как сделать дубликаты ключей BMW например F серии

[@BimDoc]

Делаются не дубликаты, а прописывается новый ключ в свободный Слот CAS модуля.

[@jeanmarty4306]

Hi I am working on cluster with eeprom 93s56, do you know how to virginize (mileage and VIN), thanks

[@BimDoc]

Very strange eeprom type for BMW. Haven’t seen that before.

[@user-Eugen0687]

Good Job! Very professional! And your language is like teacher's ))) or cheater's)) (if so more like that)

[@googleriam]

Hello Vladimir, am i able to change 35160wt chip using R270.

[@BimDoc]

R270 will not handle the 35160wt chip

[@KLJUCSERVISBIH]

I like this man. 😅 Tito! He's don't haw problems with sharing experience with potential no loyalty concurrent He just sad yo my guys 👦 bujrum 😀 It's so easy and you "probably can" do this by yourself, just be "little" careful and don't worry be happy :) And don't l miss something *After reading again ...And also in the 🎶

[@BimDoc]

Knowledge is everything)

[@sanjoks25]

Hello, can you programm used smart key for BMW G30, 2018. ?

[@BimDoc]

For G series at the moment ordering key via dealer is the only well working solution

[@MsTrimph]

Hi Vladimir, I am writing to you from Spain. I loved your video and I will follow you from now on. I have a problem in my cluster BMW f20 lci 2018 116d Panel Cluster 6wa enlarged black. The battery is discharged while the vehicle is stationary. It gives two error codes and according to the internet it is a combi cluster error that does not let the vehicle sleep and they recommend changing it. My question is can it be reprogrammed? If it is virginized, can it be fixed? My son error codes. 804086 controller kl15WUP shorted to positive. B7F67B kombi incorrect hardware activation line status. I hope you can help me. greetings mate

[@BimDoc]

If some ECU is gone bad and doesn’t allow bmw to sleep then it has to be exchanged. As a test try to disconnect Kombi and see if bmw goes to sleep properly or not. (BMW should fall into sleep if locked for 20-30 min)

[@luganosimon4111]

Can I have your WhatsApp number brother

[@stefancemil3883]

Hi , i have the same cluster but when i've opened my board is smaller and i do not find the chip

[@BimDoc]

There is no cluster without EEPROM So have a better look 👀

[@leonidasfoulides5428]

Да и скажите пожалуйта. Не имеет значения если машина с системой ASC а панель от машины с системой DSC? . Или всётаки искать панель от машины с системой ASC? И спасибо вам за ответы.

[@BimDoc]

В теории должно решаться кодировкой.

[@ra_diance104]

Здравствуйте, что может быть? Ребенок игралс с крутилкой айдрайв и теперь при переключении с комфорта на спорт дисплей не меняеться?

[@BimDoc]

Режимы все равно меняются. Просто в настройках убрана галочка отображения смены режима.

[@mylifestyleinamerica6216]

Hey man thank you for video! You can do this excellent job in my cluster?

[@BimDoc]

Cluster Verginizing is on the bench job only. But yes, it’s possible 😉

[@luv_xxx2770]

boss i have a 6bw cluster the eeprom 160 lost all data i read with vvdi prog how i can get a data for our cluster

[@BimDoc]

Use dump from similar cluster. But universal vvdi eeprom will be needed. Because ID will be a problem

[@user-pf8wo1bi5c]

Здравствуйте. Если пробег в приборке меньше, чем на авто, обязательно вин стирать?

[@BimDoc]

Вин обязательно тереть в любом случаи. Иначе не привяжется.

[@mmihai82]

Hello! Used 6WA for BMW with 160D0WT eeprom was read with CG Pro 9S12, i did mileage correction and erased VIN and installed in car. Cluster was coded, no red dot but every time i turn ignition on mileage increases with 5 Km without Red Dot Tamper. Any ideas?

[@BimDoc]

Very strange behaviour. Probably smth wrong in eeprom. ((

[@svetlanaborisovna3691]

How did you solve the problem? I have exactly the same problem. Please help

[@mmihai82]

Bad chip, used new chip from VVDI and the problem was solved

[@novoznik1]

@@mmihai82купил приборку обнулена, красная точки нету, вин подтянулся, каждый пуск +5км , сижу в шоке

[@MsTrimph]

Hola Vladimir te escribo desde España Me ha encantado tu vídeo y te seguiré a partir de ahora. Tengo un problema en mi cluster BMW f20 lci 2018 116d Cluster 6wa ampliado black panel . Se descarga la batería estando el vehículo parado. Da dos error Codes y según internet es un error del cluster combi que no deja que se duerma el vehículo y recomiendan cambiarlo. Mi pregunta es se puede reprogramar? Si se virginiza se puede arreglar ? Mis error Codes son. 804086 controlador kl15WUP cortocircuito a positivo. B7F67B kombi estado de línea de activación incorrecto línea de hardware. Espero que puedas ayudarme. Un saludo compañero

[@BimDoc]

English please ))

[@MsTrimph]

@@BimDoc Hi Vladimir, I am writing to you from Spain. I loved your video and I will follow you from now on. I have a problem in my cluster BMW f20 lci 2018 116d Panel Cluster 6wa enlarged black. The battery is discharged while the vehicle is stationary. It gives two error codes and according to the internet it is a combi cluster error that does not let the vehicle sleep and they recommend changing it. My question is can it be reprogrammed? If it is virginized, can it be fixed? My son error codes. 804086 controller kl15WUP shorted to positive. B7F67B kombi incorrect hardware activation line status. I hope you can help me. greetings mate

[@faheemansari9060]

Hello sir I am 35160 wt cgdi prog read file and 35160 M reples kar sakta hn

[@BimDoc]

A bit hard to understand your question (

[@hyundaiioniqkianiromainten3319]

hi, can you swap the eprom to another cluster without problems, remove the cluster from the car, remove the eprom and install it in the replacement cluster?

[@BimDoc]

It is doable not with every eeprom type. Starting from eeprom 35128/35160 eeprom ID is written into flash and they are not interchangeable

[@hyundaiioniqkianiromainten3319]

@@BimDoc interesting….is it possible to remove the old eprom and replace it with a new one ,,, (without writing to the new eprom?) and then coding it to vehicle once installed?

[@maxb6935]

@@BimDoc hello Vladimir, do know any possibility to change the id on the new chip? Which kind of programmer is needed and where to search for the ID?

[@alexanderkoss7905]

Добрый день! После обнуления приборки 6WA и установки на автомобиль при переключении зажигания добавляется в одометр плюсом 5 км, не встречались с такой проблемой?

[@BimDoc]

Установил много приборок. Таких аномалий не встречал

[@sergeiintex]

Всем здравствуйте! Красная точка не горит на комбинации приборов, случайно?

[@svetlanaborisovna3691]

@@sergeiintex такая же проблема с 6wa от ф10, красной точки нет, все кодируется отлично, но при каждом переключении зажигания, к побегу добавляется +5км. Кто знает как решить проблему?

[@svetlanaborisovna3691]

Странно вообще как то получилось, вин потерли, пробег не трогали, так как пробег с донора меньше чем в авто, закодировалось все норм, точка потухла, но чисто случайно заметили, что при переключении зажигания прибавилось 5км,и так постоянно при каждом включении зажигания. Думали что возможно проблема в авто, стерли вин и установили в другую авто, и тоже самое. Кто может подсказать или решить проблему?

[@sergeiintex]

@@svetlanaborisovna3691 Здравствуйте! В диагностике ошибок по комбинации приборов нет?

[@turfcoa8522]

So if I buy the cluster with lower milage on it then I just need to plug it?

[@BimDoc]

Not correct! VIN code has to be erased. Other wise cluster cannot be adapted to the vehicle

[@andrewzheng3660]

Do all clusters have 2 EEPROMS? I have seen some guides that only remove one EEPROM?

[@BimDoc]

Not all clusters have 2 eeproms 35080 type and 35128 will have only 1 35160 type will have x2 eeproms

[@petrul.2009]

Vladimir, get BMW CGDI and make a video comparing it to BimTool VVDI. Also CG Pro vs. VVDI prog. Like for this video!

[@BimDoc]

Send me BMW CGDI for a test and full comparison )

[@petrul.2009]

@@BimDoc 🙂

[@petrul.2009]

Get in touch with CGDI, they will send u for advertising

[@leonidasfoulides5428]

А если чип от родной перепоять на на дугую панель то будет работать ?

[@BimDoc]

Это не решит вашу проблему

[@vallashtur]

Super!

[@BimDoc]

Thank you! Cheers!

[@anonymous-se6hl]

в приборка до 2015г только один чип, который легко стирается, но для его извлечения нужно снимать стрелки

[@BimDoc]

В приборках Е серии да только один еепром.

[@anonymous-se6hl]

@@BimDoc в ранних приборках ф серии тоже

[@Vaso24]

@@anonymous-se6hl он пока про это не знает, но зато пилит видосы знатока 😁

[@rony5922]

Hello, what if i change my F30 cluster to not virginized one and try to code it? Would it work?

[@BimDoc]

It will not work properly No point in trying. 💯

[@rony5922]

@@BimDoc Ok, thanks for your answer

[@SadlixPL]

I have an e90 cluster and can I just buy another eeprom and replace it without any programming and after that just code it into my car?

[@SadlixPL]

It's a m35080 eeprom

[@BimDoc]

Only if EEPROM is exactly the same type.

[@igorshashkov1462]

eeprom 160d0wt, а пишите как 35160wt ?

[@user-pf8wo1bi5c]

Здравствуйте. Подскажите пож. Как на столе не подключая к авто проверить пробег на приборке g серии?

[@BimDoc]

Для обнуления все равно надо работать с EEPROM. А там в дампе уже и пробег видно будет. Так просто как на Е серии подав плюс и минус не получится.

[@user-pf8wo1bi5c]

@@BimDoc в eeprom смотрели пробег, он там как то зашифрован 4 символами. В специальной проге расшифровали. Но все равно присутствует сомнение. На f10 с компа кидал 12в и смотрел. Многие говорят что и здесь так можно, но никто не делал.

[@user-pf8wo1bi5c]

@@BimDoc я посмотрел предыдущее видео с обнулением 6wb на f10. Там вы говорили что просто подав 12в можно увидеть пробег.

[@tutorialfeed9497]

Great video and really informative! Just a small clarification regarding your explanation about hexadecimal numbers. You mentioned right around the 13:05 mark that the value 0xFF is equal to 0, which isn't accurate. In the hexadecimal numbering system, a single digit can represent values ranging from 0 to 15. Unlike decimal numbers, which only have digits ranging from 0-9, hexadecimal numbers extend that by including the first six letters of the Latin alphabet (A-F) as additional digits. In hexadecimal, the digits range from 0 1 2 3 4 5 6 7 8 9 A B C D E F, where 'A' is equivalent to 10 in decimal, 'B' to 11, and so forth up to 'F', which is equivalent to 15. So, when you look at a one-byte hexadecimal value like 0xFF, it's actually equal to (15 * 16^1) + (15 * 16^0), which calculates to 255 in decimal notation, not 0. The representation for the decimal number 0 is consistent across binary, octal, decimal, and hexadecimal numbering systems. In all of these systems, zero is always zero. In the case of hexadecimal, it could be written as 0x0, 0x00, or 0x0000, but it's always equivalent to the decimal number 0. I hope this clears up any confusion! Keep up the good work on your videos! -- a fellow Bimmer nerd

[@BimDoc]

That’s true Just FF values are takes as VERGIN and that’s why they often referred as ZERO But yes FF = 255

[@dainilis32palmerstown22]

Hello, I think you are using the wrong adapter because cg prog shows that you need to use 35080 and you are using 35160wt?

[@BimDoc]

Definitely not. 35080 eeprom was installed on E series dashed. And yes 35080 will require another adapter. Over here we are working with F series.

[@dainilis32palmerstown22]

yesterday i did f series 160dow i used 35080 adaptery and everything is ok

[@dynoronixperformanceandtun7501]

@@dainilis32palmerstown22 35080 adapter is fine for 160dqw eeprom, its correct for this eeprom, for 35160 you need to use 35160 socket that comes with cgpro,

[@ruslankrasilnikov6629]

why just not resolder eproms from original to donor cluster?

[@BimDoc]

On that eeprom it’s ID is written to the flash. So replacement is not possible.

[@the_batmobile0.4]

Will swapping the chip work? F series?

[@BimDoc]

It will not work in F series anyone

[@rem8768]

Как всегда хорошее и грамотное видео.Но)))

[@hootistigglebits]

What do you wash with?

[@BimDoc]

Flux cleaner. Don’t remember the exact model now.

[@yiannakosautomotivekeys2380]

*Hi. Looking at the Eeproms, the one that cannot be erased is 160DQ = M35160. I did a BMW M3 the other day and I managed to correct the mileage by choosing 160DQ (Mode 1) on the programmer (CGpro). I don't know why you chose M35160 and not 160D from the menu. Love your video. Just subscribed!!! Keep it up, and thank you for sharing.*

[@BimDoc]

I also switched to CG PRO to work with clusters. In my opinion it handles EEPROMs better that VVDI Prog

[@James0u812]

Can you just swap EPROMs from one cluster to the other??

[@Jojothesponge]

Just tried and unless you have the experience of soldering it’s ducking crazy hard

[@BimDoc]

EEPROM swap is possible on E series only. On F and G it will not work in that way any more

[@Jojothesponge]

@@BimDoc is there any way to use a used cluster without soldering I have a e66 that needs a new cluster and I can’t solder for the life of me

[@James0u812]

@@BimDoc thank you. It is for a g30 with a cluster that intermittently goes black. Do you know if anyone repairs these? Possible a cracked solder joint somewhere?

[@dodon1983able]

А для чего использовать дорогое оборудование, для данного щитка достаточно обычного R270 за 1000 рублей. И вторую микросхему можно не отпаивать а прищепкой поправить Vin.

[@BimDoc]

Потому что выгоднее купить один раз более хорошую вещь. Чем пол каждую задачу искать свой программатор. Прищепка далеко не всегда помогает.

[@mikemurphy7519]

Why not just move the chips from the old cluster to the new one?

[@BimDoc]

That will work only on E series and only if eeproms are identical

[@gi908]

Привет. Я все приборки отправляю одному электрику . Человек имеет оборудование которое позволяет не випаевать И пром. и всю процедуру делает с телефона. Я гуглил чтобы найти такое оборудование но не нашёл. Кто в курсе где купить?

[@BimDoc]

Такое решение есть от VVDI Но не все чипы делает без выпайки. Думал купить, но не увидел смысла.

[@ilyalyin4142]

когда же будет видео как обновить дооснащенные блоки?

[@BimDoc]

Это проходим на каждых курсах по программированию бмв.

[@MinelabCTXKing]

@@BimDoc

[@Tuned_RWD]

Can I send you my cluster so that you can program it ?

[@BimDoc]

Yes it is doable

[@user-ou5ro6my2g]

cg pro где покупал? Оригинал?

[@BimDoc]

Конечно оригинал. Покупал с их оф сайта. А они клоны бывают? Вроде оригинал не столько стоит чтобы про клон даже думать 9

[@csautomotive8279]

Can Mini Cooper digital clust be virginized?

[@BimDoc]

Of course it can be done

[@csautomotive8279]

@@BimDoc thanks for your reply. How can it be done? Any instructions? I got the cluster but anybody has been able to do the coding

[@csautomotive8279]

Thank you for your amazing content. @BimmerDoc

[@95-region-BORZ]

Владимир cgdi или vvdi bim tool pro какой лучше спасиба

[@BimDoc]

Не могу сравнить. Нет CGDI BMW

[@petrul.2009]

@@BimDoc Bimtool отдыхает.

[@95-region-BORZ]

Как понять bimertool отдыхает

[@petrul.2009]

@@95-region-BORZ BMW CGDI рулит.

[@95-region-BORZ]

Petru L можно свами связаться

[@moldovanandrei7008]

Автор, не осветил тему насчет ID чипа. Ну и маленькие 5 копеек: first 2 ROWS of eeproms dump, not part or partition.

[@BimDoc]

Да чип привязан по ИД к процессору.

[@alexeus1781]

Владимир, всё замечательно! Молодец! Но ключи за твоей спиной постоянно отвлекали меня от просмотра - крайние левые повешены не по ранжиру :) ...

[@BimDoc]

Поправим ))

[@luv_xxx2770]

sir for normal cluster i

[@BimDoc]

Sorry I don’t understand your question. Specify please

[@pit_electri4estvo]

Приветствсую Владимир. Vvdi трет эти микры запросто главное выбрать правильно микру, в вашем случае это не 35160 а 160D и трется она даже без адаптера. Один из немаловажных советов могу дать: нужно фотографировать позиционирование микросхем перед выпайкой - очень полезная процедура :)))

[@BimDoc]

Сфоткать это очень хороший лайфхак. Каждый раз если не сфоткаю, вспоминаю об этом )) Для работы с EEPROM еще лучше программатор CG PRO

[@pit_electri4estvo]

@@BimDoc я заприметил что в cg pro можно сразу пробег править :)) это достаточно удобно. Я вот последнее время облизываюсь на CGDI prog, судя по описаниям штука классная

[@BimDoc]

У меня оба есть. Для приборок он намного лучше

[@MegaKakaa]

Hey brother how do i do this for g series ?

[@MegaKakaa]

I am having a trouble to hook into main chip to write win into 6wb g30 clusyer

[@MegaKakaa]

Cluster

[@BimDoc]

On G series there is 35128 eeprom. And not every programmer can manage it.

[@MegaKakaa]

@@BimDoc we have done f series cluster and is it much difficult or does it require extra tools and software to do this g series ?

[@MegaKakaa]

@@BimDoc are u able to do this procedure can u show us video how to ? :(

[@PasRuleViskasNormaliai]

there is a small trick with CG Pro to erase mileage, i have done lots of them (35160 and even 35128 chips) all of them were done successfully, ofcourse you have "erase failed" sometimes, but that's not a huge problem, usually it takes ~30mins to erase it.

[@BimDoc]

And the trick is?))

[@moldovanandrei7008]

@@BimDoc игра напряжением.

[@patrum90]

@@BimDoc heat eeprom when erasing

[@lukas2678]

Gal noretum papasakot?🙁

[@jwbonnett]

FF actually means 255, not 0, 00 is 0.

[@ArnoKLX]

Привет, респект про english 😊, я латыш, ну буду писать на русском. CG pro 9s12 пишит ети vvdi еепромки ?

[@BimDoc]

Да он с ними справляется. Приходиться поколдовать, но работать можно