How We Made 64,000 Beads From Beach Waste

[@BrothersMake]

A massive thank you to all you legends for watching, and to Skillshare for supporting our channel by sponsoring this video 🤙🏽 And remember, the first 1,000 people to use this link will get a 1 month free trial of Skillshare skl.sh/brothersmake05231

[@eugenetswong]

Way to go, brothers! You have much to be proud of. I'm proud to have up voted this comment and the video.

[@danieljefford6497]

Do you guys check your messages from patreons? Sent a message on the 12th May and have not seen a reply yet. I'd there a better way of getting in touch?

[@jagrutipatel3019]

Mind blowing. Job. To. Save. Environment.

[@SollersScrappingandDiving]

This is brilliant! My youngest who has cancer gets beads of courage from a charity that makes beads for children with cancer for all the different procedures they have to endure. Theirs are glass, but recycled plastic beads could be put to all sorts of uses like that, including charity beads ❤

[@BrothersMake]

Hey this is an amazing idea. If you email us at [e-mail] we'll sort out some of our beads for your little one 🤙🏽

[@KSC587]

Moringa is a natural suplement, Ivermectin anti parasite, both cure cancer...❤

[@lyndaproctor1128]

I loved the beads and EverydaySollers...great idea...the bead..the bead=cancer fund/donation...hey..you 2 should donate some of your beads to this young man. So ALL can donate...from beginning to the end..."from junk to brilliance "

[@SollersScrappingandDiving]

@@lyndaproctor1128 ❤

[@HELENGodLoves]

​@@BrothersMake brought a tear to my eye!!! 😢 Fantastic to see AMERICAN MADE

[@gotmilk9843]

I would genuinely purchase these just as a bracelet lover. I love kandi and rave style beaded bracelets, but it’s a real shame there isn’t a more environmentally friendly option. I would use these for all kinds of creations!!

[@BrothersMake]

We’ll be having them ready for sale by the end of the week :)

[@dashingwomble]

A great idea for sure, maybe make a cutter that will cut off all the beads at the same time. Then put the beads into a rock tumbler to remove the excess plastic nubs. That may work. Great content as usual.

[@laurieowen8696]

You should be very proud of yourself. You're brilliant. I thank you, my grandkids grandkids thank you and the planet thanks you!

[@REALBETTYBOO]

AMAZING!! I live in Florida surrounded by lakes and oceans 🌊 and I frequently think about the waste cluttering all of them😢 I truly appreciate your work/video, it makes me feel better!!

[@LordTraco]

I wonder if you could make a mold that is a comb with the bead at the end of each prong? Probably not as efficient, but it'd be cool to be able to do both!

[@divinenonbinary]

That’s actually such a clever idea

[@Emma_Wright]

I used to live in Bournemouth and the rubbish left behind after a sunny weekend infuriated me so much. Thanks so much for your hard work in not only cleaning it up, but giving it a second life!

[@samiday6486]

Wait on a second. I don't know if how you have the bolts on open edges of your molds is a standard practice in the industry but the botany world needs to know about this because it would save so much time if plant presses used this design instead!! Only just found your channel but I am already thoroughly in love with it! Thank you for doing what you do!

[@JiggsysShed]

This is great, showing how what has been discarded as waste can become something desirable. Such a great cause to be supporting with you work! Awesome video!

[@f.k.burnham8491]

Great that you are cleaning up the plastic. I might suggest a mod to the molds where you use a metal T shaped wingnut fastener to hold the halves together. That would save massive time. Also think about being to use a paper cutter to shear the beads from the sprew. I used the T shaped wingnut fasteners on my lead molds with good success. I got that idea from US military surplus electronic equipment. I suspect that Dzus fasteners would work quite well also to hold the mold halves together.

[@BrothersMake]

Thanks for the suggestion! We have tried wing nuts but the forces we are working with are pretty massive and without enough clamping pressure we end up dealing with a lot of flashing. We’re gonna try quick release clamps.

[@guilhermesouza6936]

i love everything you do guys, i hope someday i can work with recycled materials too

[@BrothersMake]

Thank you! Give it a go - it’s great fun

[@eduardoempresario]

hi guys regards from Costa Rica, saving money for a project like you have here in Costa Rica, I am doing by hand surfboards keyholders and Pads for computer too, you are a truly inspiration for me, thanks

[@BrothersMake]

That’s awesome! Keep fighting the good fight 🤙🏽

[@KubedPixel]

A couple of thoughts that washed through my head while watching this.. For small parts like beads or any other injection mold. 1. Build a vise to put the mold in instead of having to screw/unscrew the nuts and bolts to hold it together. The vise will make it quick release. 2. A guillotine to cut the beads off in one go instead of one by one. 3. This may work... Just tumble the beads as they are which should knock off or smooth out the threads/squeeze out from the edges of the beads or pop some polishing stones in which are mildly abrasive to achieve the same effect but quicker. Hope that helps 🤘

[@BrothersMake]

Really helpful ideas man! Will definitely be giving these a thought to put into practice, thanks! 🤙🏼🤙🏼

[@WormFunk]

first video of yours i've seen and wow you've got an amazing process going! Making me think how I'd love these colors made into beautiful items for creating craft tools such as knitting and crochet things 😊 keep doing what you're doing!

[@theplantista25]

WOW!!!! Amazing work!!!! See you in the next video.😃👍

[@BrothersMake]

Thanks for watching!

[@ConstantXplorer]

It'd be interesting if you could make Raspberry Pi cases or other types of cases and enclosures with the leftover plastic bits.

[@VoodooRusty]

This is the first video I've seen of yours, and I'm so glad I did! I am looking forward to these smaller beads being available on your shop (I see from other comments that they're coming soon), as I'll definitely be picking up a few other things once they're available as well. I'd also like to gently suggest that you add the approximate size of the HOLES of the beads to the item descriptions on your site. Didn't see that on the bigger beads, and it's hard to get a sense of scale from the pictures alone. This is useful information for crafters like me, so that I know what size elastic/wire/yarn will fit, as well as the size of needles I can use to thread them on. Thanks, and looking forward to seeing more, now that I've subscribed!

[@MARYBOORMAN]

Same here (Ontario viewer here!) Kudos to you and your collaborators. Brilliant! I am spreading the idea to NZ as well.

[@mrtienpham]

Why not make a shape press to push out and cut the beads (since you milled a shape). In fact, just order something like a die cut every time you make a mould. Also, look at bead spinners, if you haven't. Could make for quick making... or at least less time. Keep up the fun videos!

[@elizabethg2715]

I love this Idea, The trash I pick up in our Cape Cod beaches drives me nuts, I always think how can this plastic be used again? I love recycled and getting more useful things especially from others trash!!

[@teresacuomo6149]

Ma che posso dire ❤siete meravigliosi 👏🤩il reciclo della plastica in corallini e'geniale per noi creative ❤ complimenti 👏👏👏👏👏👏👏👏👏👏👏

[@TwinkleTwink69]

If you made them into round beads you could turn them into 3D beaded animals! I make little turtles with my round beads, and I think that would be perfect to do with these kinds of recyled beads

[@BrothersMake]

That'd look awesome, great idea.

[@soniaanderson5204]

Hello from Canada!! Love your shop, great stuff and gorgeous colors. Did you thought to make tiles? Could be a great alternative for backsplash or even a parquet style floor in a sunroom. Sure be love if some of my countryman be having your creative sense. Also I watched the one that you made fabric with plastic bags, and you were asking for ideas...about reusable grocery bags. I made some of it when plastic bags was still used here (we are back to paper bags which should never got away to began with lol); I was hand cutting all my strips and then crochet them. Caused myself a serious case of CTS but made gorgeous items that are washable and sure sturdier that some of the one they sell at the store.

[@mkaminmulla]

So good video 🌱

[@meadowsz5390]

I AM SO STOKED for this video!!!!!

[@BrothersMake]

☺️☺️

[@OkOhYeah]

Wow! Your team look so cool :D Thanks for saving our planet, one bead at a time x

[@BrothersMake]

They’re the best 🤙🏽

[@LopsideMakes]

You guys can definitely make this into a much bigger project! Maybe allowing people to donate plastic waste? I’m not sure how practical that is, but I think those bracelets and other things made could be given to people who would’ve taken things that are wasteful anyways! You guys are awesome, amazing job!

[@BrothersMake]

Thanks so much! We do actually take donations from our local community, so have a lot to sort through!

[@kathybyers398]

What a great idea and awesome cause to keep your beaches clean. Keep up the good work.

[@shauntellvanhorn5550]

You guys have given me ideas in ways that I can benefit the planet and make useful items I especially love your videos for the average person so the ones that want to truly make a difference can do so with normal every day items. Thank you for that information.. 😊

[@judithgarcia5137]

Nice! I think it would be very wonderful if you could make that same recycled plastic into cabochons for beautiful necklaces, and make them look like turquoise? Especially with high gloss varnish on top.🥰

[@akshayd211]

Lads, you're doing inspiring work.

[@mildredthegoat8340]

9:39 Branklets should definitely be a thing! So are these the Branksome Branklets?! Hmm. . . the Brotherhood of Branksome Branklets?!

[@maryclairamar6844]

Great, intelligent and humanitary project you are doing ! Congratulations to these younsters!

[@BrothersMake]

Thanks!

[@douglasbernick5908]

I love what you guys are doing. Keep it up. I make tie-dye T-shirts and these beads will go great with them. You guys are saving the planet and making beautiful items at the same time. Kudos.

[@doreenwatson-read]

oooooooooooh I would love a branklet. also, I would be so happy sitting and snipping off those beads from the long thingy.

[@aguywhosbi7671]

i LOVE this video! i am very very excited about fashion and clothes-making, as well as crafting accessories- but the materials for that are not exactly sustainable. i've been wondering if there could be plastic elements made from recycled plastic but i've never ended up finding much. i'm very happy to be proven wrong! /i hope these beads will be up for sale. i'd love to buy some!/

[@BrothersMake]

Thanks so much for watching! Beads will be on the website VERY soon. We do offer them wholesale too. Email us at [e-mail] to find out more 🤙🏽

[@veronicasiczewski299]

👏🏼👏🏼👏🏼👏🏼🤩💕 Amazing project. May others follow your sustainability awareness. 🙏🏽

[@kikaspian7170]

I think a more efficient way to remove the overflow would be to stick a bit of sandpaper to your table and sand it off all the beads at once.

[@cutelittledevil88]

The perfect evolution is the crab, so your gesture totally makes sense ;)

[@bryanholder1329]

You could make a press mood that would cut the beads from the main stems after they have cooled to drastically cut down your work load. Use the angles from the snips that were used to cut them by hand. Think “leather hole punch” and paper hole punch but on a mechanical press. You can make that too using the design you already have to raise and lower the injection arm.

[@BrothersMake]

This, in theory sounds like a great solution. The one thing that ruins that plan is shrinkage. The plastic shrinks by between 1-3.5% after cooling and this fluctuation would impact the location for pressing the cutters.

[@kaylaadams6417]

Wonderful project! Thank you.

[@iyeetsecurity922]

If you're wanting a specific(ish) color but don't have enough, if you mix a packet of _iDye Poly_ by *Jacquard* in a bottle and add a tad while you're baking the HDPE, it'll work. I used an empty 32oz bottle but the size doesn't matter much. This is for use on the clearish/white plastic such as milk jugs. -Clean the bottle out -Stuff the dye packet and "color intensifier" packet into it -Pour hot water in it. I use tap water that's as hot as comes out. No boiling. -Fill the bottle with just enough water to be able to mix the dye. I use about an inch from the bottle. -Add just enough to your HDPE to coat it all as even/dark as you can -Bake til melted enough to start mashing it altogether -Repeat melting it and folding it til you're happy with the consistency -Fill your mold, bake it, and BAM! It's not as good as just having enough of the color, but it works!

[@andreatthatsme]

W😮😮😮W That is amazing 👏🏾 👏🏾 👏🏾

[@bryce-194]

this is what i’ve been searching long n hard for😭 thank u so much! Cant wait to try this out for myself😊

[@BeCreativewithTerryJeanette]

Love this! They are absolutely beautiful! I found some netting on our beach and wove it into bracelets. I've also recycled paper and guitar strings into jewelry too. I would love to be able to get ahold of some of these beads.

[@jamilacreates]

Loved this video! The beads look so cool! I just wanted to pop in here and say thank you! You inspired me to used recycled HDPE in my fashion designs! The marbeling looks so cool!

[@BrothersMake]

Thanks so much Jamila, that's so great to hear! Good luck with your designs 🙌🏼♻️

[@avopia4925]

You guys have come along way since I last ckd in on yas👍🏽😁 rock on Dudes 🤘🏽💖💖💖

[@BrothersMake]

Thanks so much! 🤘🏼💚

[@Cartoonlover135]

Another home run video! What a cool idea, those beads looked steller!

[@BrothersMake]

Ah thanks so much, too kind!

[@volkhen0]

Every time I go for a bicycle ride I always come back with some trash. Finding at least one HDPE plastic cup is a must and I ride my bike until I find one. I have more motivation to ride a bike now ;) then these cups are put in special charity collection baskets which are in front of some big supermarkets, churches etc.

[@StickyFrogStudio]

say I wanted to make plastic beads in like... my garage... just for myself... what kinds of things would I need? like the basics

[@myragroenewegen5426]

question about the "nerdles", those plastic pellets: Surely they can't be PRE-production plastic waste, as you say. If they are pieces of existing waste from plastic products wethered by the ocean they should be POST-production plastic, no? Love to hear what makes them so hard to work with and how they can be reused.

[@BrothersMake]

They aren’t broken down pieces, they are virgin pellets on their way to a manufacturer for turning into products. Unfortunately, spills are very common during shipping and they end up on the beaches

[@9liveslisa]

Nice job, guys!

[@susane945]

I really LOVE you guys!! Thank you for recycling!! ❤❤❤

[@gemmaluescher-verseckas1243]

I Love that comb- would use it for weaving

[@Work_out_ex_storage]

Fantastic! Such a motivation to me

[@BrothersMake]

Thank you!

[@Jayn]

I love what you guys doing

[@BrothersMake]

Thanks so much, J 🤙🏼

[@themajesticwierdo2193]

How good! The beads look awesome

[@BrothersMake]

Thanks so much!

[@shondra6]

This is great , well done. 🤗🤗

[@smrk2452]

This is awesome. Thank you!

[@AlbiesProductsOnline]

If you get a hole punch to fit close to the side of the O.D. Of the beads one like you hold a chisel they have an exit port on the side so you can hold it over each bead and hit it with a mallet and as you go they with eject our the side as you cut them off the tree then you don’t need to clean the up because your cutting them close to it’s size and you can obviously get a hole punch for every size bead and this would make it go heaps faster

[@MissGroves]

And the brithers do it again!!!!

[@elisabethgreen1268]

Maybe try using a paper cutter, the ones with the big blade, to cut, you could cut in one fell swoop.

[@CRBungalow]

Wishing i lived in the UK right now. I think getting that. Shipped to the U.S would cancel out the good. But the beads look beautiful.

[@shaanz2.087]

Super fantastic results❤❤

[@karenv.m.5298]

Great job, guys!

[@BrothersMake]

Thanks Karen!

[@judybogle7426]

GOD bless you all 🙏. ♥️. 🙏.

[@garylinker69]

Brilliant. Remake one side of your mold so you can pour and replace one side with a new side that has cutting faces. Screw it together and unscrew, save you cutting each bead by hand? Nice work!

[@BrothersMake]

Sounds great in theory, but the beads shrink a tiny amount which would throw the cutter off a little, so each bead would have to be visually checked for damage, which kinda defeats the point of speeding it up! Thanks for the suggestion though!

[@cassandraknight8804]

I love the comb, so useful 😮

[@loisannzendarski9718]

The snipping process looks like something I'd like doing. Lol I would love to do this, it's right up my art alley!😮

[@jhsevs]

What do I need to melt plastic in my oven? Do I need, like, parchment paper? Should I go buy silicone oven mitts first?

[@BrothersMake]

Sure, those are both a great start. We don’t recommend melting plastic in an oven you’re planning to cook food in though

[@SteveRoberson-t1x]

You need a jig that cuts the fresh beads quick instead of doing it by hand then perhaps a tumbler where you can then sift the finished beads from the tumblers abrasive ,, love your idea !

[@loril.mangold8160]

I've seen Drums made of glued and compressed cardboard there were very durable. THE COMBS ARE NICE. CAN the bead Company possibly make their own beads?

[@beccalee199]

Amazing work, it looks so pretty 👍

[@BrothersMake]

Thanks Becca!

[@Kristian_theDane82]

Yet again, another great project 👍 how you did it.. well, it beats me 👀 😁

[@BrothersMake]

Haha, thanks so much!

[@therunawaycamper]

I think what you're doing is absolutely brilliant. As a jewelry designer myself I would like to buy some of your beads to see what I could come up with

[@stalwart56k]

Gentlemen, I love your channel! I'm curious to see what else can be made from LPDE plastic bags. This kind of waste is incredibly common in America, and there is incredibly difficult to recycle at scale. Most of the plastic bags, and a lot of the plastic, in the United States ends up in the landfill. Thanks as always for your ideas and demonstration of how much work it is to recycle plastic....

[@BrothersMake]

Thanks so much! We have a video coming out this Friday which shows you how to work with LDPE bags so keep an eye out!

[@kirkwilson72]

can u do a video on the equipment use use and price and were u got them from and the bead mold

[@BrothersMake]

Sure!

[@headrobotics]

A press with a cutting die could save you a lot of effort to avoid having to cut off the sprue by hand etc. Then putting the beads on a spindle to turn off flashing lathe style

[@stickyfox]

those are technically runners on your workbench; the sprue gets the material into the mold and the runners distribute it to the cavities

[@dive_with_matt]

You’ll be coming up in the 2T amount soon enough! Was a great time at sobo beach with you guys on the 5th of may. Thankyou for a great evening! Immense skill and craftsmanship. Keep up the great work!

[@BrothersMake]

Haha that's our next goal! Thanks so much for coming down bud, hope you like the necklace 🐋 hopefully see you again soon ♻️🤙🏼

[@samiakishk8205]

Many thanks for your work.. Amazing.. I use beads making many kinds of accessories i wanted to know how they are made💜💜🌷🌷🌷

[@christiegriffith5883]

I bet you could put the beads into a big tumbler still attached to the connectors. The tumbler with some steel beads and or abrasive should break the beads off as well as take off the nubs left. I would get a cheap rock tumbler and experiment with the idea

[@BrothersMake]

We get this suggestion a lot. The issue would be the change in surface finish

[@lenamaner4227]

Love it great job

[@PhantomTemple]

Hey guys... i dont know if you have already tried this. but.. have you thought about making a series of lamps? Table lamps, pendulums, floor lamps? Maybe even outdoor lamps? The shades dont have to be see-throug. It could be a twist on using shadows reflected on a surface?

[@BrothersMake]

That's an awesome idea, not one we've thought of but that's a great shout! 💡

[@roxiepoe9586]

Beautiful. Have you ever looked at the bead making methods of old glassmakers? What I have seen and read has it that the streamer of glass is wound onto a long, prepared, metal rod. The rod is removed and the tube is snipped into bead lengths. The beads are 'tumbled' (like candy and rocks, etc.) to round and smooth the rough edges. I haven't seen modern glass bead making but I imagine that the snipping is mechanized now. In their method, there is almost no waste and it looks like less of a pain in the neck than all that sprew clipping. (Let me now apologize for being a meddlesome butinski. I think way too much.)

[@lenamaner4227]

Amazing job

[@MsTJPink]

Bravo!! That's amazing, had a thought, would it not be easier to tumble the beads rather than snipping the overflow off by hand? 🤔

[@BrothersMake]

It would be for sure, but we think it'd effect the surface finish of the beads, so we thought we better go with the manual method!

[@MsTJPink]

@@BrothersMake Fair comment, it just flitted across my brain ☺️

[@BrothersMake]

Great idea though!

[@justinweatherford8129]

I would love to have the brothers make show up and help me to make use of all of the plastics and paper that I have stored in the garage. I have stored them to ensure that they get recycled. I would want to watch them turn my scraps into usable items; because, I have learned not to trust the usual recycling companies. Maybe they might be willing to set up a partnership with me, to bring their company to NE Kansas.

[@BrothersMake]

That would be awesome! Sadly we're a bit of a way away over in the UK, but if you check out the Precious Plastic website, it'll tell you where your nearest workspace is, and they'll be able to do exactly that!

[@azharmukhi5894]

Can't wait to see this video

[@BrothersMake]

🙌🏼🙌🏼

[@jojojeff1366]

cool stuff!

[@BrothersMake]

Thanks!

[@lin90210]

You guys are amazing :) my sustainability tutor at uni taught us abut embodied energy. Is there a way you offset the carbon emissions to recycle the plastic say solar power? Planting more trees?

[@fthurman]

I hope that with the moulds now made, that you'll make some other colours up and sell your own bracelets. Or heck, even just sell bags of beads - I could make the bracelet (or heck, a necklace) myself

[@BrothersMake]

We'll definitely be selling the beads on our website soon, keep an eye out! ♻️

[@amandao.8043]

@@BrothersMake You could sell them uncut ;-D

[@mtmtmtmt]

turquoise and green are the colors of the Earth as seen from space.

[@BrothersMake]

You got it! 🌎

[@KaleidoSaurus]

I wonder if there were a way to make a custom mold that had less waste to re-recycle, where the core could also be a useable item.

[@Coyo-Tea]

I would love to make jewellery for Surfers against Sewage it is such a worthy cause. But as they already being made I am off to look in their shop. ❤

[@BrothersMake]

It's definitely a great cause! And that's great to hear, if you grab one of these, you'll be wearing some of the beads we made in this video 🤙🏼

[@sousalarson6858]

This is wonderful! Do you sell the beads by themselves? I have some other projects i would love to make with them.

[@lisajarvis3820]

The moulds you have for the tiny beads are they for sale? I would like to purchase some if I could?

[@baybabe95]

Approximately how much does that desktop plastic scanner cost? That looks so helpful!

[@BrothersMake]

It’s around £2,500 I believe. Matoha is the company 🤙🏽

[@natashacarr5585]

Beautiful beads! I live in Tobago and I make natural jewelry with seeds etc. that are available here. I would like to know if you are selling them as I am interested in purchasing some to incorporate into the jewelry that I am making.

[@FranciscoToroRey]

Awesome 😀

[@BrothersMake]

Thank you!