How we TOUCH UP paint!

[@TheGadileck]

I've been mixing and matching my own T/U paint for 20 yrs. You're the first person I've run into that's gifted with a similar kind of talent. Glad there are others; I was starting to wonder if I had a one-off ability. With my work, I always strive for 90-95% matches. In the last 10 yrs, I haven't needed to use recipes for most colors. Comes in handy for boats, RV's, bicycles and motorcycles. Let alone the convenience of just picking up toners and mixing what I need on the spot. 100% matches are rare, so I let those happen naturally. Would love to connect with you and compare notes.

[@BorndetailersTv]

Do you have a Instagram? Dm me we can connect. what system are you using for your matching? It's really hard you memorize the wheel matching becomes a lot easier.

[@TheGadileck]

@BorndetailersTv I'm not on Instagram, but I might start an account. Using SW Ultra 7000, but I can mix with any paint system as long as I have access to all the toners and powders. And like you say, once you get the color wheel figured out, things go much faster. I noticed you were working with pretty thick paint. Do you ever thin it down with paint reducer? I find that with the smaller chips or scratches into the basecoat, that thinned paint dries smoother and settles down into the repair area better.

[@MarkQuintana801]

Good work homie I still need you to touch up the 51 for me OG Mark

[@RedSunArtisan]

I love using a BBQ stick , it works all the time ❤️ sanding and polishing it later is a killer 👐

[@BorndetailersTv]

@@RedSunArtisan I need to try that for sure

[@RedSunArtisan]

@@BorndetailersTv it’s the same thing ❤️ it’s works like a syringe, a pointed brush etc etc , I use that because it’s stiff and thicker ,

[@jacobshank9362]

Man you need more subs, views and likes! Love the video editing and knowledge you offer to others. You can tell you are well versed and experienced

[@BorndetailersTv]

Thank you means a lot I’ll keep it up

[@VerbalKarate]

I've got an '89 560SL in Los Angeles that I really wish could get this kind of love, instead of a whole new paint job.

[@TKTampa]

Great content,what color matching software do you use? That would be a great video to make!

[@BorndetailersTv]

Axalta and Standox formula

[@Ecdetails]

Hey bro - so you offer training ? I’m think about learning from The master no cap

[@BorndetailersTv]

trying to set up something soon I was talking to nick we need to come out for podcast.

[@Ecdetails]

@@BorndetailersTv and cigars

[@johngalt5411]

Amazing work, I need this kind of work done on my 2023 Cayman GT4 but I'm on the East Coast. Know anyone out this way you could recommend?

[@BorndetailersTv]

@@johngalt5411 where are you from I can find someone in your area

[@btbd2785]

If you have a deep scrrach or chip in a panel. Would you recommend first dabbing on a primer area then dab or brush on the paint then clear on top of that?

[@BorndetailersTv]

Yes I would if it's a time thing

[@thomasprandstetter6022]

can you show a touch up on a black metallic panel which is getting a ppf?

[@dillon599]

Whats them rolling chairs called?

[@BorndetailersTv]

I’ll make a video on it.

[@dillon599]

@ShineguysTV ok cool thanks