How we turned Coupling From Scrap What Nobody Thought Possible with Old Scottish VTL

🔧 Ever wondered what magic Pakistani machinists can conjure from a heap of scrap metal? 🧙‍♂️ Prepare to be amazed as they turn useless chunks into precision couplings using sheer ingenuity and a pinch of elbow grease!
💪 Watch in awe as they wield torque like a wizard's wand, slice through metal with finesse, and dance the drill bit to their tune. With a touch of Scottish flair, they master the vertical lathe, shaving metal like a seasoned barber!
🛠️ Working with limited resources and perhaps not the shiniest tech, these machinists prove that true craftsmanship knows no bounds. Who needs fancy gadgets when you've got skill, determination, and a sprinkle of Pakistani charm?
👨‍🏭 Join us for a journey where precision meets perseverance, and where the sparks of creativity fly higher than any workshop roof! Don't miss out on this metalworking marvel - hit play now and witness the magic unfold! ✨

[@tismeagen684]

I just love these Pakistani machine shops, everything and everyone immaculately clean and tidy, with nothing out of place! The most modern machinery available and top class safety flip flops! How these people keep all their fingers and toes in such an environment is amazing, and yet they manage to ingeniously produce parts, and are probably paid little.

[@hydraulichands]

Haha, we appreciate the humor! 😄 Our machinists might not have all the fancy frills, but they sure know how to make magic happen with what they've got! 🪄🛠️ #ResourcefulMachiningGeniuses 🌟🔩

[@rodneyferguson446]

Exactly my Thoughts. IF this were taking place at a Mill/Factory in the USA, OSHA would Absolutely SH*T! While these Machinists do a HECKUVA Job with what they have, the absoluite Lack of ANY Safety Gear on both Equipment and Personnel (things like no Equipment Guards/shavings and tripping hazards everywhere/face shields/the loose clothing/sandals/eye protection/hearing protectio/the list goes on and on) or Requirements show you why a LOT of American Companies (I'm NOT saying this is an American Company) move Factories Overseas due to what they can get away with. If they had to bring this Factory and the Workers into "Compliance" with even the Minimum OSHA Requirements, it would cost them MILLIONS of Dollars and shut them down for who knows how long. And for anyone that thinks OSHA is Tough, I worked at a Surface Coal Mine for 25 years and we had to deal with MSHA, who make OSHA look like Amateurs! I'm NOT talking Bad about this Place, Like I said, they are indeed AMAZING!

[@tismeagen684]

Yes they do, they seem to be able to make everything from anything, they are truly skilled and I do admire their ability. @@hydraulichands

[@tohellwithhandles]

​@@hydraulichands those are not fancy frills. A clean safe workplace and full workgear are the very minimum requirements in any civilised country.

[@MrPlusses]

​@@tohellwithhandles Even with all the civilized country's rules and regulations they still manage to injure and kill thousands a year.

[@martinscopes3914]

Does any one else do this it’s so relaxing watching this I sort of want to full asleep but I can’t full asleep because I want to watch it. These guys are masters at this and I like watching one after another.💪💪💪

[@horstmuller7512]

Good job! All tolerances are guaranteed less than 2 fingers. And seems this time most of the workers survived the day.

[@rogerwilliams2902]

How do they know if the "weld" will be strong enough too , bloody hell .

[@haribabua2176]

எட் ​

[@far_outlook]

@@rogerwilliams2902 I'm wondering the same thing as you, there's no guarantee or verification

[@steveandjenny149]

I like how you showed the two different pieces being worked on at same time 👍

[@hydraulichands]

Thank you! 😊 We aim to showcase the multitasking abilities. Efficiency is key! 🛠️👍 #

[@rayp.454]

Those old vertical lathes could really hog some material!

[@hydraulichands]

Absolutely! 💪 Our vintage lathes may be old, but they sure know how to get the job done efficiently! 🛠️🌟

[@TruckWrench92]

super genius mans,,,,,, doing great job, wishing you good luck, plz stay save

[@ypaulbrown]

all those guys using a torch, have the 'squint' down pretty good.... those cuts are very impressive though.....I have cut 4 inch [100 mm] steel plate before, you have to know what you are doing..... a Bravo on the quality of their cutting ability......looks like they are using Propane by the way the torch was light.... cheers from the US, Paul

[@martinscopes3914]

Great job. I love them old machines the power of them is out of this world and still going 150-years later. If I stood my smallest lathe next to yours it would be look like a match box lol my smallest lathe is a EMCO UNIMAT 3 . Love your videos UK👍. 💪💪💪

[@hydraulichands]

Thank you for your kind words! Old machines have a special charm and power that's truly remarkable. It's amazing to see them still in action after so many years! Your EMCO UNIMAT 3 may be small, but it's mighty in its own right! Keep enjoying our videos, and thank you for your support! 🌟🛠️

[@rogerwilliams2902]

You learn something new every day , because I always thought Coventry was in England , how wrong I was , its in Scotland after all !!!!.

[@ypaulbrown]

I thought the same thing....Coventry is where the Jaguar plant is/was and was heavily bombed in WWII

[@ianalex2]

You're absolutely right. It seems their geography is as imprecise as their machining.

[@BradfordGuy]

I would never place a bet with any of these people that there is something they can't make!

[@hydraulichands]

Absolutely! They are masters of innovation and creativity. They thrive on challenges and always find a way to make it work! 🛠️🌟 #MachiningMavericks 💪🔩

[@chrisrmorriscm]

I doubt they were told they can't. My bet is they were told they shouldn't. After watching the welding alone i understand why they shouldn't

[@SHADOW.GGG-]

can you imagine if he stumbles and falls onto that chuck

[@ghoulardi8875]

Yikes!

[@hydraulichands]

Safety first, always! 😅 Our machinists are masters of balance and agility, no need to worry! 🚶‍♂️🛠️

[@roberthewitt1030]

State of the ARK ENGINEERING

[@hydraulichands]

Ark Engineering is at the forefront of innovation in the machining industry. Despite facing challenges, their dedication and creativity shine through in every project. 🌟💡

[@user-vq4nw2du2r]

Интересно, а сколько стоит у вас сорокалитровый баллон сжатого кислорода?

[@armandofernandezrobledo6120]

Unos buenos mecanizados pero sería bueno q las virutas también se quitaen

[@MechanicAvenue]

Looking like a waaaooo ❤ 👍

[@darciojunior5379]

Aplausos.👏👏👏👏👏👏👏

[@user-um6wg9ds4p]

Зачем газовой горелкой делать отверстие в центре? Типа две заготовки получаются или на токарке сверлить и растачивать не выгодно или станка нет?

[@PyroFalcon]

We should have never allowed them to have nukes

[@roberthewitt1030]

There's such a thing called pre heating. Especially when welding two pieces of metal together of that thickness and a proper joint prep......oh well ruff as f..k engineering

[@hydraulichands]

Ah, a bit rough around the edges, but our machinists always find a way to make it work! 😉🔧

[@SHADOW.GGG-]

never gonna leave the middle ages

[@hydraulichands]

Who needs modern times when you've got timeless craftsmanship, right? 😉🏰 Our machinists keep the spirit of innovation alive in their own unique way! 🛠️🌟

[@zdzisiek1979]

Dobra Praca

[@user-zq3iq7pi8j]

Дыры для балансировки 😅 из говна и палок состоит вся жизнь.

[@Bosjak63]

По крайней мере они делают сами в отличии от раши ))

[@ZeroDi]

​@@Bosjak63Набери на Ютюбе: Как делают атомные реакторы. Клоун.

[@derekb4731]

Love to see the guy in flip flops, love these videos