Oven Not Heating, Selector Switch Fault on Oven

[@monikacvesperova]

Amazing video. I repaired the oven with few bucks and now it works again. Thank u so much!

[@PhilipStonehouse-ob9kz]

I've bought you a well deserved beer Paul, cheers, Philip 🍻

[@How-to-repair]

Thank you very much for the donation Philip. It is much appreciated. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @PhilipStonehouse-ob9kz please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@DGul-fp2do]

THANK YOU so much for your great video guide! We were able to change the selector switch of our oven and now it works perfectly again!

[@How-to-repair]

Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@richardbranson8658]

Thanks...fixed my oven thanks to this..got the part of ebay £15....job done....brilliant

[@NibblyPig]

Thanks oven david attenborough! In my case I had some little notches but these were a red herring - I found that one of the springs was not engaging to push a connector closed when the dial was turned. Possibly fixable with some WD40 or contact cleaner but I ordered a replacement part anyway, only 12 quid. A gentle push with a screwdriver and the troublesome connector snapped closed, so I set the dial to the 'oven on' position, nudged the stuck connector so it closed, and reconnected all the wires and now I'm simply turning the oven on at the wall to turn it on/off while I wait for the replacement. Typing this while I wait for my fish fingers! :)

[@cdonuts7335]

I have a Smeg TR90BL where the bottom element isn't turning on, the two round elements around the fans work. But not the bottom. Looking at the wiring diagram I thought it can't be the switch how would that fail in a 6 year old oven. I tested the element by putting power directly to it and it heated! So I was thinking it maybe the PCB relay which I replaced but still no good. So it must be the selector switch as you describe, not going to be as easy as the one you're working on as my Smeg has a gas cooktop to disassemble to get to the selector switch. 🙄 Happy I came across this video even though it was made 5 years. It pointed me hopefully in the right direction !

[@malatswaaustinmolepo5423]

Your video is straight forward, it really helps me. Thanks, a lot

[@How-to-repair]

Hi mate thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@everythingodyssey9619]

Great video and explanation. My oven is acting exactly as you described. However I've replaced the selector switch and I still have the same issue. I think the thermostat is working (I hear the click and my meter beeps during the continuity test). The heating element gets hot during grilling (and the thermostat works with this too. What would be the next most likely component at fault? Thanks in advance.

[@How-to-repair]

Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@petertyler1710]

Thanks Paul. Exactly what we needed to know. Pete and Maz.

[@ecologicaltime]

you a great teacher.

[@How-to-repair]

I appreciate that! @ecologicaltime please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@trevorrackley2018]

Thanks for details. If the selector indicator was still billy lit in the off position would you expect the fault to be in the switch or the thermostat. Many thanks

[@kimngorlow749]

Hi, Thank you for your detailed explanation on this video. My Brandt oven: When I switched on the main switch of oven, it lights up, but once I turned the Selector Switch, the whole house tripped. I have opened up to have a look and there is no burnt marks like what you have shown in your video here. What could be the cause please? I wish to show you the photos but there is no uploading here. Thank you. 11 Aug 2020

[@hlangananihadebe7936]

I have exactly the same problem... did you get any help?

[@jmy6050]

You mention selecting the desired oven setting before turning the thermostat knob to heat desired... to avoid burning out the terminals in the selector switch. What about when you select the preheat setting, then after the oven has warmed up, you need to move the selector switch to your desired setting? Isn't that also bad for the terminals in the selector knob?

[@mitasilva]

Thank you so much! We fixed our oven thanks to you!!!

[@FrancisAhorlu]

Sir am working on mini cookworks with hob the fan, hot plate not working but the oven working what are the causes Thanks

[@PhilipStonehouse-ob9kz]

Brilliant! I can now replace the switch myself but I can' work out how to "buy you a beer".

[@How-to-repair]

The most important thing is, you manage to get your oven up and running. I'm glad it helped you. here is the donation page www.how-to-repair.com/help/buy-paul-a-beer/ What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @PhilipStonehouse-ob9kz please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@stephenjoseph1244]

I have learned a lot from your videos and channel, Thank you. Keep up the good work

[@How-to-repair]

Glad it was helpful! Thank you for leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@allrightythenallrightythen6468]

I have a indesit single oven .. it’s about 3years old .. the oven setting does not work,it doesn’t come up to temp.. but if I select oven & grill it works ok

[@TranceManiac4life]

Thanks heaps for such a good video. I should have seen it first before I bought a circular heating element.

[@How-to-repair]

Thank you for leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@chelseaboylucas25]

So my selector switch came loose , it was attached with two screws , I took the knob off and screwed it back on, unfortunately after this happened I have now lost all power to my oven… any suggestions? Thanks in advance

[@sumashpatel8278]

Hi sir you Explain is very well i like very very very much I see your video washing machine which is washing machin water pump filter on your video way i did short out to my Bosch washing machine from me lots of thank you you did great work .

[@sengtan4733]

Grreat tutorial, Paul. Thanks. I have a Westinghouse PXR688S not heating. Do you have a video of this, please? Seng

[@MrSamahiji]

Great video and well explained. Well I have different issue, I wanted to swap the broil with the bake in the selector. I want to depend on the bake cooker instead of the grill. Can I simply swap the wire in the selector?

[@How-to-repair]

ask question on site and i will try and help Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@barryporteous4904]

Does the thermostat switch have a much higher current rating than the selector switch? Hence your advice of not switching on using the selector?

[@חיים-ז1ג]

HI great video//LOOKING FOR Oven Rotary Switch// MIDEA 65DME30007 (8 MODES OR 9 ?????)

[@pwave123]

Hi, I have a Candy FPP 602/1x after about 10 to 15 of work it jumps the main circuit breaker. I had a technician over and he check the bottom coil and it was shorted so he replaced it. The following day it jumped again and now he thinks it a thermostat. I was wondering if you have any idea? Thanks

[@daniellawrence9616]

Hi, great video. Could this be the cause of my problem if all features on the oven work correctly except the fan assisted element in the main oven which doesn't get hot. I have tested the element and tried a new genuine element but still no difference. Any advice would be much appreciated. Thanks

[@alanamos5158]

I have a Whirlpool model# RF111PXSQ and I checked continuity to both elements. When I turn the broil and bake oven on it makes a clicking noise right behind that knob. The part # is WP9762215 and I just wanted to know how to test it. I have taken apart a lot of motors. So now I have a soldering iron if needed. Im a landlord and try to fix everything myself so I was asking how to test before I buy it. Thanks man

[@birds.flying]

I want 1 switch please contact me

[@YounesYousafi]

thank you so much i learned a lot from this video

[@How-to-repair]

I'm glad it helped you if you ever need further help with your cooker we've got hundreds of videos on the site What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @YounesYousafi please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@chrisgeorgallis3966]

If the selector switch on a kuppersbusch in built oven turns freely and oven won’t come on?

[@johncrosley1]

The most likely fault and the cheapest repair will be the thermal cut-out on the rear of the oven. There is another similar looking device on the top which is normally open and turns on the cooling fan when necessary.

[@omerahmad]

Sir ihave proplem with select switch oven smeg 120 plase answer me...?

[@ultrapepe2905]

Legend, saved me a bunch!

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@saltyjonny1]

I have a whirlpool AKG 353 /wp and when turn the oven on the grill comes on. I can't get the oven to come on the fan works and the thermostat lights up but no heat and the of position doesn't turn it of.. So I'd say the elements as gone plus I need a new selector switch. Could you help as I can't fined my model anywhere. Thanks

[@ramongomez7498]

Thanks for the video, it was very helpful! I am having exactly this problem but for both selector switches (The 12 program and the 6 program selector switches). I replaced the 12 program selector from my Sauter oven and now is 'almost' working again (all programs except the one to turn the oven off '^^). Does anyone know if is there a link between the two program selector switches that could cause this kind of malfunction or are both switches completely independent? Thanks in advance!

[@mohamadyasinowadally8564]

Hello good day Sir. Are ypu still making video? Can i send you my ref of selector switch?

[@TheThelightsaw]

Hi! I am looking for the spare part for my Teka FG-924.3, can you help me please?

[@Life_Is_Adventuree]

My oven is working well,it just the electric current all over it that scares everyone who touch it,it gives shocks..my friend says maybe it grounding were problems,i hope you can help me find the fault and fix this problem

[@How-to-repair]

sound like the appliance is not earthed correctly. Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@dspitler1]

how-2-repair.com I’m

[@VincentChanda-ci6qi]

Thanks very much engineer

[@anniekapilili1731]

Thank for the information

[@marcmalan38]

HI, great video! My selector switch overheated and melted the plastic like the one in the video, I then swapped it out and then the new switch only lasted a few months. I replaced it again today and that wire is still getting very hot. It is the wire that connects from the thermostat to the selector switch when the oven is on. What could be the cause of the wire getting very hot? I have made sure that the connector is not loose, it makes a good contact. Kind regards Marc

[@fuzzykeuh]

There can also be a bad connection between the wire itself and the cable connector (that you slide). Or the current is simply too high for the plastic material. Then i would say the manufacturer tried to be a cheapskate.

[@gustavchuene7430]

Thank you so much for this video and the tips, now I managed to fix my oven🙏🏽🙏🏽

[@redkop7909]

Thank You! The best explanation!

[@patrickjacobsen7805]

Awesome video. Cheers.

[@سعدزغلول-ن5ر]

Thanks fir explain

[@How-to-repair]

You are welcome thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

[@shilinzhang7745]

thank you very much. great video

[@How-to-repair]

Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. kzbin.info/www/bejne/qHfceHR-i6uIjZo&t facebook.com/how.to.repair.appliances/ Stay safe

[@milkarton]

Amazing explanation, thanks!

[@OngtwinsTV]

very helpful

[@How-to-repair]

Glad it helped @OngtwinsTV please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@AkashPatel-uy6xb]

Excellent sir

[@theojacob6726]

You mentioned it a selector and not a thermostat switch

[@How-to-repair]

The selector switch is what sets the program to the type of heating mode then the thermostat controls the temperature if you are having problems with your cooker feel free to use the website and I will try to assist you when I have all your cooker details. Have a great Christmas and a happy New Year. Hi Theo Jacob I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/ this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@sufiyanmuhammed5859]

Big thanks

[@How-to-repair]

I'm so glad I could help you I hope we saved you some money and made the appliance last longer

[@EverH0p3]

Thanks for the vid!!!

[@LR13-s7h]

Thank you!!

[@JacquesDuerinck-tf8oz]

does anyone has experience with this oven from bosch hb86e560n01 the psu 5 v 12 v 00642212 board fails after 1 week every time

[@melvilleproctor9374]

THANK YOU Great

[@acp7328]

Dude, use a hi res camera.