“Take off this hub thing.. yeah... whatever it’s called I don’t know.” “Hope this won’t kill anyone....haheeeeeeh” After this video I will make sure you never work at discount again.
@jay_volpe5 жыл бұрын
this video isnt for you bro.
@terryfrye45524 жыл бұрын
yeah whatever bitch. you ain't gonna do shit
@Aman-rp7yj7 жыл бұрын
For all y'all asking why ppl need wheel spacers. I bought a brand new set of tires, read online they wouldn't rub at all. At full crank they rub a little bit and they almost brush against my knuckle. I would like to stop the rubbing so wheel spacers are a valid option.
@elvis2benguet7 жыл бұрын
This will help me, I was planning to install on my Tacoma 2011, Reason I am putting wheel spacers just to avoid rubbing if I put larger tire.
@MrRahimhosein4 жыл бұрын
NEVER LUBE THE WHEEL STUDS!!!
@yoseeev83063 жыл бұрын
Serious or no?
@johnsonandson77725 жыл бұрын
👍👾 good video - Use anti sieze on the face of hub to spacer and contact points from spacer to wheel they will mend together over time. Use locktight lite on spacer studs. The blue stuff not the red. I never use locktight on studs to wheel but maybe just a dab..
@dirklentfer3833 жыл бұрын
What is the correct torque specs on the spacers and wheels ? I'll use RED LOCTITE on the spacers...
@aljurioleyva15165 жыл бұрын
What are your thoughts on the wheel spacer now that you've had it for a while?
@ramblin_man233 жыл бұрын
Hold on, he’ll answer soon.
@joshwatsonero27643 жыл бұрын
Keep holding he is typing 💬
@JavierPadron Жыл бұрын
For people watching this video!!! DO NOT PUT ANTI-SIEZE ON LUG NUTS BUT ON FLAT SURFACE BETWEEN ROTOR AND WHEEL SPACER, AND USE RED LOCKTIGHT ON LUGS OR NOTCHING AT ALL AND JUST RE TORQ AFTER FEW 100 MILES
@JWMontoya7 жыл бұрын
This was a great video man! I plan to get bora wheel spacers as well!
@NimaTech7 жыл бұрын
thanks man! glad you enjoyed it!
@thenewlife.pt27245 жыл бұрын
Are they better than shifted industries?
@alexpuls82196 жыл бұрын
Not supposed to put any type of lubrication on lug nuts. When you torque the lug nuts they will be over torqued because of the lubrication on the stud. You always torque lug nuts when they are clean and dry.
@drumtum813 жыл бұрын
Anti seize should go on the backside of the spacer to prevent rust and corrosion
@kevinmontoya73185 жыл бұрын
Your recording in heaven because you forgot to add anti lock onto the spacers
@michaelroach7994 жыл бұрын
Kevin Montoya if you know how to put a wheel on a torque them to spec you don’t need loctite. It also says it voids there warranty if you put any on
@kevinmontoya73184 жыл бұрын
@@michaelroach799 its a joke duh, sorry for being rude im just letting you know that i was joking
@michaelroach7994 жыл бұрын
That’s a terrible joke lmao and you aren’t being rude to me. It’s the internet bruh, idc
@kevinmontoya73184 жыл бұрын
@@michaelroach799 oh because you account has no image i though you where some geezer
@michaelroach7994 жыл бұрын
Kevin Montoya lol I am not. Just don’t do much or care much for my KZbin account. I don’t post stuff. 🤷🏻♂️
@dieselcowboy88438 жыл бұрын
I used to work at discount tire too and thinking about putting wheel spacers on my truck I have a 08 ram 2500 6.7
@NimaTech8 жыл бұрын
honestly, if you go with the brand i have you will not have a problem what so ever!
@VICD5056 жыл бұрын
Thanks man, great video.
@blackmacgyver99654 жыл бұрын
Did the lugnuts for the inside of the spacer come with the spacers ? Looks good 👍🏽
@dirtsailoroff-road55804 жыл бұрын
I was a professional mechanic at a trucking company and if you put anti seize on your bolts 9/10 you will have a wheel off.
@MultiSwc138 жыл бұрын
thanks for the reply appreciate that I was departing on getting these but now I am goanna gonahead and buy them
@NimaTech8 жыл бұрын
Yeah i would highly recommend them! stay tuned I am going to make a review over them soon! i've gone 7,000 miles on them and they are perfectly fine!
@johnsonandson77725 жыл бұрын
I defarted on gettn these also... 👾🍌
@robertmurillo96627 жыл бұрын
Your torque spec on the wheel hub is 140ft lbs. but if I you torqued the wheel on to the spacer to the 140ft lbs you will break loose the wheel spacers studs so getting the wheels off will be nearly impossible since the stud and nut will rotate together instead of coming off.
@primetimepoolplastering7 жыл бұрын
Robert Murillo thanks smart ass
@pedroblas1005 жыл бұрын
using these type of spacers will help you to void the steering wheels shaking
@abymondesir237 жыл бұрын
much respect looks fukn raw!
@shanelinker76975 жыл бұрын
Never use anti-seize on anything that involves the wheels...
@LiftedSilveradoBuild8 жыл бұрын
Don't put anti seize on wheel spacers, worst advice I've ever heard. You use the opposite, high grade Loctite. Unless you're okay with your wheels flying off...
@NimaTech8 жыл бұрын
well my wheels didn't fly off, so i think i'm good. thanks for the advice though! i'll look into it!
@LiftedSilveradoBuild8 жыл бұрын
But when or if they do it's a hazard to other drivers like myself. Advising 20,000+ others to do the same is irresponsible. Just cause you work in a tire shop doesn't make you a garage guru... This is coming from an automotive technician.
@NimaTech8 жыл бұрын
very very true, but i am not forcing people to do what i do, just giving them my advice, don't have to follow them if you do not want to.
@hesneyk17 жыл бұрын
it would be impossible for the wheels to fly off....the lugs holding the spacer on the the disk cannot back themselves out against the rim. At best, if they did come loose,...the rims would vibrate. Goodness gracious people....think.
@LiftedSilveradoBuild7 жыл бұрын
They would not just vibrate. The lugs would snap off. And if anything don't put anything on the lugs in the first place. Anti sieze is just the opposite of what I would put on there. Think...Just think.
@leonelcruz46516 жыл бұрын
Very different and look good
@BCarborist4 жыл бұрын
3 years later, have they fallen off? Still on ? Was any issues? Go good?
@htx_rc42568 жыл бұрын
yeah! HTX
@NimaTech8 жыл бұрын
H-town!
@JesusRamirez-pm3ys7 жыл бұрын
so it wont give any problem looks nice i already buy for my ford but still tinkling to put it on
@NimaTech7 жыл бұрын
i'm about to post my review video up monday. wait till then and watch what i have to say about them! i think they are good!
@paulejoubran78267 жыл бұрын
Anti-seize is the best thing you can add to your lugs. Proper torque is more important. Lugs aren't going to fly off because you've applied a bit of anti-seize.
@streetclasscc51894 жыл бұрын
If you get bora hub centric spacers but the after market custom wheel center bore is wider than the centric on the spacer. I heard that buying those plastic wheel ring that there is no weight on them?
@abort3dfetis3 жыл бұрын
Thank you so much 🔥🙏🔥
@havenhuffman62895 жыл бұрын
Wheel spacer will help with high speed turn in and grip around the corner and high speed towing ?
@7giop137 жыл бұрын
Do not put anti seize! Repeat dont put anti seize!
@thenewlife.pt27245 жыл бұрын
gio pola why
@pedromorales19785 жыл бұрын
The New Life. Pt2 it's just like a grease. they will loosen up.
@garrettg6216 жыл бұрын
This dude stacking rear blocks LOL.
@suavehouse51505 жыл бұрын
Garrett G Must be a rough country lift lol
@andrewkitchens39177 жыл бұрын
Ayeeee I use to work at discount tire too
@paulhankosky91138 жыл бұрын
Have you have any problems with the spacers sense you put them on?
@NimaTech8 жыл бұрын
nope, not one problem yet! i am going to make review video about them soon! i have gone over 6000 miles on them and they are good!
@ricardojaimes018 жыл бұрын
The best and safe way to pull out youre tires its to buy some OFF SET rims
@NimaTech8 жыл бұрын
true, but these work as well :)
@cheekssssss6 жыл бұрын
Not all of us can afford $900 rims and tires
@kodyking30906 жыл бұрын
Vinny Pedi exactly
@bertramslandscapingllc5 жыл бұрын
Great video thanks for the tips😀
@jonathanrodriguez69167 жыл бұрын
its been some time now. How they working out for you right now? Is it still driving good? Would you recommend it?
@NimaTech7 жыл бұрын
Yes i highly would, as long as you properly maintain them. as in re-torque them when needed. Go look in the description box I have a review video link, check that out it'll explain everything!
@vongdaranorady28163 жыл бұрын
Did your front tires rubbing when u turn?
@chosenone10045 жыл бұрын
It honestly didn’t appear that the spacers made that much of a difference . Is it possible to use two sets of spaces ? Or is 1 the limit ?
@robertwilliamson14876 жыл бұрын
How’s the spacers working? Still good?
@froilanpatacsil4 жыл бұрын
Did the lug bolts comes with it or yiu have to order separately?
@zachrwagner6 жыл бұрын
Hey man sorry for the super late comment. Gotta question on the fitment of the spacer on the wheel hub. I read that Bora Spacers are hub and wheel centric, just wondering if those spacers fit nicely onto the hub ring?
@maded726 жыл бұрын
Looks good.
@NimaTech6 жыл бұрын
thanks
@2921hj4 жыл бұрын
I took an auto shop class but yeah save this hub thing and just torque it 50-60 lbs even though spec is 150 don’t worry about spec .... your video will kill someone
@1leviro4 жыл бұрын
How are the spacers holding to this day?
@kingsunra23816 жыл бұрын
I love how it looks are those 2 Inch spacers because I was thinking about getting a set for my new Chevrolet Impala do you think it would work on a 2017 Impala?
@danielfiddler50146 жыл бұрын
Dope thanks for the help.
@grovelformyashes24785 жыл бұрын
I wonder if he worked at discount tire?
@streetclasscc51894 жыл бұрын
My question is i have a silverado 1500 6" lift i want to put front and rear spacers if installed properly are they safe to tow? I have a 5000lbs camping trailer that i tow alot. Are they safe even in the front??
@bigchief15597 жыл бұрын
What size rims and tires do you have? I got a 2015 silverado with 7.5 lift on 20x9 on 35s. My rear don't poke out at all and my front tires do, need to even it out. What size is the spacer you put on?
@RALPH5319673 жыл бұрын
Did you only do the rear?
@TheAjrod35 жыл бұрын
Houston 🤘
@christopherhough89548 жыл бұрын
Are the steel adapters safer? How come?
@texasmarshall42567 жыл бұрын
Did you order the bora spacers from custom offsets? I just ordered a pair of 1.5" bora off of their site
@watchmanexpert4 жыл бұрын
Hi you still have the spacers? Any issue ?
@CheapBikeOwner8 жыл бұрын
WHOOP WHOOP TEXAS!
@NimaTech8 жыл бұрын
you know it!
@cannotyelleet41736 жыл бұрын
Thanks man
@KDizzy4156 жыл бұрын
what offset are your wheels?
@StevenSavoy4 жыл бұрын
I’m here in H-Town too. I need these installed as well as lowering springs. Do you do springs as well?
@ramblin_man233 жыл бұрын
Hold on, he’ll answer soon.
@er753398 жыл бұрын
You're not getting any vibration after the spacer install? Just curious because spacers have a tendency to cause it.
@NimaTech8 жыл бұрын
No i don't have a vibration problem. if you are having that problem, I would retorque all the spacers and make sure they are 100% flush
@yourfavoritelawnguy27228 жыл бұрын
The Hub Centric Rings help to remove Vibration problems caused by deep dish rims or spacers. Most new rims are dual drilled 6 lugs so the Hub slot in the center is cut for the larger Hub, so its likely it will NOT fit around your hub snuggly, my old truck had this problem and i was not aware of the Centric Rings as i bought 20x12s right as they first started being pushed, as soon as i bought the Centric Rings it got rid of all the wheel play/vibrations/shaking/wobbling caused by the gap around the Hub. If you happen to add spacers and then the deep rims without puttin these Rings on your wheel is going to literally vibrate off while your driving, unless your lucky and the Hub slotting is matched to your HUB because its the largest 6 lug Hub, but GMC/Chevy trucks that are 99-07 i can confirm need the Hub Centric Rings if the wheels are dual drilled
@er753398 жыл бұрын
Well I was asking because I lifted using some spindles. When i finally got done, my oem wheels didn't fit onto the spindles and had to run and buy cheap wheel spacers to get the wheel off the spindles. After that, I got this nasty vibration and after some research, figured out it was the spacers and that it's a common issue with wheel spacers. Got my wheels and tires a couple days later and that bad shake went away for the most part. Now I'm just struggling to get the shake out of these 35" tires. Hub centric rims fixed the shake on my bmw so I already knew to order them after the second road force balance didn't solve the shake. Need to install then though
@lukedobmeier6 жыл бұрын
Do the spacers come with another set of lug nuts?
@chrispetersen14235 жыл бұрын
Do u have the factory offset or did u get wheels with different offset
@madkappa15 жыл бұрын
Does this void your warranty
@Ali-Muscle4 жыл бұрын
Did you ever retorque them ? Is that even necessary???
@tisoy9097 жыл бұрын
Hey you put anti seize on spark plugs my friend, not spacers. Haha you're a crazy guy.
@NimaTech7 жыл бұрын
well i enjoy being crazy so i'm glad i fit the part perfectly lol
@tisoy9097 жыл бұрын
Nima Tech it's OK to make mistakes man but that one's a biggie.
@NimaTech7 жыл бұрын
well the video is old so if my wheels haven't fallen off yet, I think I'm good :-)
@tisoy9097 жыл бұрын
Nima Tech I agree
@jaguarman19837 жыл бұрын
tisoy909 actually you're not supposed to put anti seize on spark plugs either.
@kabzooj887 жыл бұрын
Bro, did you have to trim fenders for the front tires, or you have clearance with your suspension lift? I have same 2" bora, but it doesn't work on the front.
@NimaTech7 жыл бұрын
I had to remove my mud flaps as well as trim the front plastic piece on the bottom of the front bumper. besides that I have good clearance. and I don't have spacers in the front, only the rear.
@kabzooj887 жыл бұрын
Thank you bro, I have rear too for now.
@big_stancesilverado23858 жыл бұрын
If I put heavy load will it work , or I need steel ones
@nickc27088 жыл бұрын
get steel. Don't go cheap. "2" lmm dually"
@gavinrees50105 жыл бұрын
Bora spacers are made of steel
@MrSamuelCaballero8 жыл бұрын
I hear wheels spacers are not safe for your truck I have a Silverado 2015 and I'm planing to put them on but don't know if they are safe
@NimaTech8 жыл бұрын
they are very safe! stay tuned about to make another video about the long term review! probably going up sometime this week!
@noblecyriac17127 жыл бұрын
Are you gonna do a video on your truck?
@NimaTech7 жыл бұрын
Yes very soon! hopefully this weekend if the weather is nice
@kmrem776 жыл бұрын
Just want to know if I have 275/55/20 tires on my 2010 gmc sierra 1500 by putting spacers on will the front tires rub since its gonna stick out more? Thanks
@romaave5804 жыл бұрын
What Would the torque pressure be on a 2017 GMC denali?
@jackiechan_wtf40417 жыл бұрын
I'm looking at your floor jack and it looks like there's one long wheel at the front of the Jack. If that's the case, that's probably no more than a 1.5 ton rated jack.
@NimaTech7 жыл бұрын
idk how much the jack could lift, but it did it jobs so thanks to the floor jack! lol
@jackiechan_wtf40417 жыл бұрын
Nima Tech At least you used jack stands, just don't want that Jack failing and while your under the truck.
@NimaTech7 жыл бұрын
that would be the last thing that i would want to happen! lol
@bucketseat30247 жыл бұрын
What size are your hibcentic rings ?
@jaysolis45127 жыл бұрын
Can you use these for performances purposes?
@MultiSwc138 жыл бұрын
have u had any problems with wheel spacer on ur Chevy?
@NimaTech8 жыл бұрын
I have a GMC and no I have had no problems with them!
@shantiago91948 жыл бұрын
Hey wondering whats that brown paste like thing you are applying on the bolts, sorry can't get the name clear in the video. Thanks
@Ixecube13378 жыл бұрын
Its called anti-seize
@ChaosFragrances8 жыл бұрын
I thought it was Annyseiss.
@jimmyhernandez37904 жыл бұрын
How big was that spacer???
@GoogleUser-qo6wf8 жыл бұрын
Is it true discount tire won't put on wheels for you if you have spacers?
@NimaTech8 жыл бұрын
Yes that is to an extent. They don't work on vehicles with spacers because they don't want to go against the vehicles factory design. but when i used to work there a jeep came in with 1 inch spacers and we torqued them for the guy. but most of the times they don't allow spacers.
@LuisHerrera-fy3mz8 жыл бұрын
houston tx boiiiii 😂
@NimaTech8 жыл бұрын
H-town!
@alexjust23337 жыл бұрын
never ever put antiseize on lug nuts, you will over torque them and stretch the stud and it can break while you are going down the road
@NimaTech7 жыл бұрын
mine hasn't broken yet so i guess i'm just lucky....
@Beachbum0017 жыл бұрын
Can you do all 4 wheels with wheels spacers?
@JordanKeller7 жыл бұрын
Steven Sposato Of course, as long as you have the clearance for the turn of the tires afterwards.
@GuillermoGarcia-pw7zp6 жыл бұрын
Guillermo said hi
@nanaernesto28917 жыл бұрын
hello I have 2 inches spacer in my car but I want 4 inches spacer and I cannot found it my question is if you think can I put in my car another 2 inches spacers on my wheel? and for that way have 4 inches? is that safe?
@michaelstarbuck84197 жыл бұрын
yanisbel martin no you don't want anything larger than a 2" spacer as is, it's dangerous and stacking them would only be worse.
@NimaTech7 жыл бұрын
2 inches is already bad, i wouldn't double the chances of an incident....
@nanaernesto28917 жыл бұрын
Thank you for you answer
@NimaTech7 жыл бұрын
yeah no problem man!
@MesoHornyak8 жыл бұрын
Why did you leave Discount Tire??? current employee
@NimaTech8 жыл бұрын
I live in Houston and it got way too hot for the summer, so I had to quit cuz I couldn't deal with the heat... :/
@MesoHornyak8 жыл бұрын
understandable.... use to live in Dallas. the heat is unbearable during the summer.
@NimaTech8 жыл бұрын
So you've felt my pain....
@Aron-ru5zk8 жыл бұрын
Why do you still have the original spare if you've put bigger wheels on it?
@NimaTech8 жыл бұрын
because my tires are only 33inch tires and the stock ones are 31inch tires so if i ever go flat it would do the job to get me out of the road and to discount tire.
@Aron-ru5zk8 жыл бұрын
: | u sure about that? You'd probably be better off driving back on the flat
@stotzmitchell8 жыл бұрын
+Habo Hamo Negative
@NimaTech8 жыл бұрын
I would rather drive with a smaller tire than drive on a flat tire and have a possibility of messing up my expensive rims! Most small cars have a factory spare and it is usually smaller than the size of the actual tires on the vehicle.
@brackenchristian16128 жыл бұрын
Word of caution. Be careful doing this. If it happens on the front you'l be fine as long as you don't put it in 4wd. But if it happens on the rear put a good tire on the back and put the spare on the front. Smaller tires rotate faster than larger ones and can cause issues. Ask me how I know. :-/ lol
@localboie8084 жыл бұрын
What size is ur tires on this vid
@favianponce318 жыл бұрын
Is the truck lifted ? And does it rubbing ?
@NimaTech8 жыл бұрын
I have a 6 inch lift on my truck with 33inch tires and it does not rub... I could fit 35's though
@noblecyriac17128 жыл бұрын
Nima Tech can you take a video of your whole truck? The side, the front,etc. I'm thinking about putting a 6 inch lift with 33s with my Sierra and just wanna see how it looks. If u don't wanna upload a video can u send me pics through email?
@NimaTech8 жыл бұрын
Video coming at you soon! I want to find a good spot to record a video about my truck! stay tune though new video coming out sometime this week!
@noblecyriac17128 жыл бұрын
Nima Tech alright!!😃
@noblecyriac17128 жыл бұрын
Nima Tech when is the video coming out!!?
@MASTER_DISLA_EXE4 жыл бұрын
Showing results of: How to install 2” bora wheel spacers (2014 GMC sierra 1500) Showing instead of: howto install 2” bora Wheel spacers (2014 GMC Sierra 1500)
@chaselingaas8 жыл бұрын
I don't have that ring, will they still fit?
@NimaTech8 жыл бұрын
depends on your rim. mine are after market rims so they need the ring to fit.
@chaselingaas8 жыл бұрын
Nima Tech mine are after market too, but the rim still fits directly on the hub.
@NimaTech8 жыл бұрын
if your rim fits directly on the hub then it will fit directly on the hub of the spacers as well
@13Gembe137 жыл бұрын
Do discount tire install wheel spacer and sell them?
@NimaTech7 жыл бұрын
that i know of, no discount tire does not sell or install wheel spacers. i bought my bora spacers online and they're doing me good
@lenhollihan8307 жыл бұрын
Nima Tech from where? I have a 2016 Sierra
@gregn5398 жыл бұрын
how much if any trimming did you have to do on the fronts ?
@NimaTech8 жыл бұрын
i just had to trim the front black wind guard on the bottom and i also had to take off my front mud flaps
@fit4ya19758 жыл бұрын
spacers= danger.. one way or another. A little tip, when you order new wheels, get a different offset
@NimaTech8 жыл бұрын
I don't like the way the offset makes the rim look
@fit4ya19758 жыл бұрын
how is the wheel different?
@nickc27088 жыл бұрын
how does spacers = bad. I run 2" spacers on my lmm crew cab dually and tow my bobcat daily. city and 70mph highway. next time you should buy quality spacers.
@fit4ya19758 жыл бұрын
Do some research bud, just looking out for ya..
@AFpaleoCon8 жыл бұрын
There is nothing wrong with rear wheel spacers.
@big_stancesilverado23858 жыл бұрын
And where did u get them !!! Could u send me the web site and how much did u pay for them
@NimaTech8 жыл бұрын
www.customwheeloffset.com/custom-offsets-store/85/2-bora-spacers-set-4-5-or-6-lug-all-makes-and-models there is the link, and I paid $260 after shipping
@Effay5138 жыл бұрын
Save your money. High quality parts. www.ebay.com/usr/lugs-n-stuff
@LaneMcVey7 жыл бұрын
Where did you get the hubsentric rings
@adamleon91287 жыл бұрын
lane mcvey Summitracing has them. Ebay, amazon.
@MegaCityOne7 жыл бұрын
Guerrilla spacers are the best. They have a guide on their website & you can buy them from summit racing.
@Hunterboy24078 жыл бұрын
How wide are your rims/tires?
@NimaTech8 жыл бұрын
tires are 305/55/20 and the rims are 20x10
@adamtx2147 жыл бұрын
Nima Tech do u have a level lift? i have a level lift with same tires and spacers and my front tires rub way too much
@NimaTech7 жыл бұрын
I actually am uploading a video tomorrow explaining my truck, go watch it tomorrow! but to answer your question, I had a 4inch pro comp lift kit and I used to rub so i had to shave a bit of my bumper off, but stay tuned because I am going to start a truck channel and talk about my truck and everything I do on it.
@rayf9825 жыл бұрын
Why put them on there to begin with?
@lawnhairgamer7838 жыл бұрын
What Is the purpose for wheel spacers?
@NimaTech8 жыл бұрын
Most people get them for looks. When you space out the wheels it gives the truck for of a stance, which also helps with stability. when people lift trucks they are more likely to tip over and when you put on spacers it gives the truck more stance to not tip over.
@lawnhairgamer7838 жыл бұрын
Ok thanks.
@kingg_bomba36538 жыл бұрын
Can this mess up your suspension
@NimaTech7 жыл бұрын
honestly i don't know the true answer to that question so i'm not going to tell you an exact answer, but in my opinion i don't think it will make much of a big deal.
@BampotDGKiiNgz7 жыл бұрын
Yes, it wears out suspension/alignment components faster and puts more strain on wheel bearings causing premature failure. Am I running really deep offset rims AND spacers regardless? Hell yeah. Do I know it'll make my truck break faster? Hell yeah. Will I deal with it when it fails? Hell yeah. But does it look badass? Hell. Yeah.
@Hookem3617 жыл бұрын
HELL YEAH!
@greenleafscapes7 жыл бұрын
🙊👍👌
@MegaCityOne7 жыл бұрын
You should have just gotten negative offset wheels.