HP 8200 ELITE SFF From Office PC to Gaming PC

[@Mico605]

This music makes me think i am watching a cooking video

[@abdulkarimutak1661]

They're also cooking, the chipset will be induction cooker

[@elia04_]

The only thing that's cooking is the dodgy psu adapter cable

[@xel1346]

Hahahah

[@luiz020388]

Kkkkk sim sim

[@RonRay]

You didn't show one of the most important parts (at least for me)... Is "where" you installed the PSU. Replacement power supply units will not fit in the original space allocated for stock PSU's. Another important item (for me at least), is the wire configuration from the 24 pin connector to the 6 pin connector. "Some" of us, ordered the ATX 24pin to Motherboard 2-port 6pin adapters and received the 4 pins in the 'center' of the 6 pin plug (two outside pins blank), in a different color-code arrangement from factory. I need to re-wire my connector to your configuration. THAT is why I watched this video, but didn't see your configuration, OUT of the 24 pin connector.

[@MegaVoltron]

i literally just have my psu sitting next to the tower

[@mrdabeetle1]

That gpu will work fine with the original 240 watt psu. Find me a psu that runs at the advertised wattage and I'll show you an electrical fire.

[@Falco75]

this video is bullshit. What you are saying is perfectly correct And, how the new PSU is placed? Over the ram with open case?

[@amdfan1974]

i have same pc just not 8200 i have 8300 but dont matter (i7 3770 8gb ram gtx1050tiLP ssd+hdd)own 240watt psu

[@weeklydoseofgaming2254]

This video was bullshit I was soo bored watching it because half the fucking video was him putting the sff bracket on the gpu and the music did my head in + he didn't even need a new psu

[@radovanrakovicky2655]

I have 8300 with 240W psu, but ordered GTX 1650 Mini (which is short too, but higher=not low profile), so I made my own case, but used that origo 240W psu and all ok

[@elmeralarcon6707]

Would my 750ti work fine with same specs and psu?

[@radovanrakovicky2655]

A lot of misunderstandingz here. So, into SFFs (with 240 or 320 psus) you can install only low profile gpu without 6pin additional power connector. All these cards has TDP 75watts, that is is maximum which pciex16 slot can give. This type of card will never take more than 75watts, because of pcoex16 slot limit. Manufacturers recommends 300 watts psus, but FOR WHOLE SYSTEM. They dont know which cpu u use, how many hdds ans so on. For example my comp , modified 6300 : i5 3570 with 77watts ( 130watts on max load), 2 x 4gb 1600 ram, ssd samsung 850 pro, 7200 rpm hdd, additional case fan, Gigabyte GTX 1650 Mini OC 4gb 75Watts, and Im still ok during 1080 full details gaming. So cpu max 130 + gpu max 75 + 2xram 10 + ssd 10 plus hdd 10 = 235 watts. But you also never reach this limit, because games are writen to use more cpu, or more gpu, so your system will never run on cpu and gpu at max at the same time. So in normal gaming my cpu takes 80watts, gpu 75watts so I still have plenty of space with 240 psu

[@Cranberryk1ng]

what system/pc did you use? because i want to upgrade mine. my system/PC is HP compaq 8200 elite.

[@MuseuFutebolClube]

@@Cranberryk1ng Works with your 8200 Elite and my 8300.

[@rhyzon]

Very good and detailed guide, I'm sure lots of people will find this useful for some interesting mods. Unfortunately, I have to agree with some of the comments here, this is not exactly necessary.These HP PCs have a small but very efficient PSU. Most manufacturers do recommend a 300W PSU for this graphics card, but cards that don't require a 6/8 pin connector can only draw 75W worth of power, which is the maximum ammount the PCI-E 16x slot can provide. Even considering a very power-hungry CPU, the stock PSU can handle the PC without any problem, since these motherboards won't allow any CPUs that have a TDP north of 95W. I know this from experience, as my personal rig is one of these SFF PCs, but the 8300 model. I upgraded it with an I7-3770, GTX 1050Ti, 16GB of RAM (4 DIMMs), one SSD and one HDD, an Asus Xonar audio card and a generic USB 3.0 PCI card. The most power draw I measured from the wall during the AIDA64 stress tests I ran was, IIRC, 167W, so the power supply still has room to breathe.

[@AZ1R2F78]

Dear Andre, i have got a hp elite compac with an i7 3770 SSD Andrés 16 RAM too, d and i am thinking to buy GPU GTX 1050 Ti without yo change the PSU. Could you tell me if you can to watch are nice increease the performance if the speed CPU or the graphics cualities in your machine?

[@rhyzon]

@@AZ1R2F78 adding a 1050ti on the machine greatly increases it's graphics capabilities. I know a few people that have similar machines and never had a problem with power. Several KZbinrs have also tried this out, so you're good to go! If you want detailed information about possible upgrades check Phil's Computer Lab, he has a few videos about upgrading SFF machines (8200 elite from HP being one of his favorites).

[@AZ1R2F78]

@@rhyzon thanks man !

[@AZ1R2F78]

@@rhyzon i like if you be would frindly tell me with more the datail, watch is the extactly type if your GTX 1050 TI, because making the search for the buy i can see some types for this GPU low profile, if you can to put an imagen i think that would be fantástic forma me ! A lot of tanks !

[@danielberry9610]

I just tried installing a GTX 1050 2GB low profile card in my HP Elite 8300 SFF and it won't boot. I get an intermittent single beep. I can only imagine after researching it that it is a power issue...

[@rickss69]

Pretty sure that video card was loaded in the wrong pci slot...

[@donkiel9988]

Yes, it has to be the black one, which offers the full speed (16x, PCI Rev. 2.0) on the mainboard. The white pci slot is (to my knowledge) only 4x!

[@OnBrandRP]

Don Kiel This is true though it’s honestly only a 1fps difference.

[@exe7936]

Nah it's not there is a reason for that

[@OnBrandRP]

@@exe7936 Yes it is, the 1050ti has support for the 16X stop trying to say by putting yours in it it killed it, That's not how that works, that's not how any of this works.

[@dkthomas77]

I have dc 8300 sff with an I5 3470. The 16x slot is the lower one on the motherboard in my machine.

[@rickss69]

Same video card in mine, i7 3770, 16GB ram and factory psu. No problems here...well over 100fps in Fortnite and average 55fps in PUBG with card temps below 70 degrees. I do have the case fans kicked up a notch in bios. Great little gamer for my total investment of $320.

[@NMEofdaST8]

@palestine Bustami I don't believe so because they are locked CPUs, the non K versions. You might be able to mess with the base clock though for a little boost

[@luiz020388]

i73770 é possível? xeon qual é o equivalente a esse i7? Quero comprar o xeon qua é mais barato, tenho a placa de vídeo gt730

[@TheKestevon]

I watched other videos they put 1050 ti into Dell sff case without changing psu and they worked fine.

[@aislemod2878]

Is it?...

[@AbideinChristSealed]

i just bought this motherboard for a new budget build. I missed that it needs an adapter for the 24 pin power supply connection. I'm glad I found this the same day I ordered. I hope this motherboard works with all my parts. Thanks.

[@yogiamani4869]

Can I put it in a another case not original case?

[@javieragredano9618]

Why you installed the graphics card in the PCI-E Slot ?....IS BETTER IN THE PCIE E 16X!!!...

[@dryster123]

Ridiculous music made me stop watching this a minute into the video.

[@Cobalt985]

"m" is the keybind to mute

[@littlejetguy]

Lol

[@bravadoavocado2382]

I endured

[@nikikiooo]

thanks man!! I got a 8300 sff with i7 3770 for around 90$ one day off Mercari and managed to snag a 1060 and new psu for just under 130$, perfect gaming pc for my smaller end games!!

[@PhantomTheInfamous]

1060 ti?

[@jackiechandler6590]

How the f did you fit that power supply in there? It doesn’t show it in this video. Which means you didn’t.

[@stickyprickle]

Indeed! I watched this whole video waiting for the ‘how to fit psu in the case bit’ and nothing!. A 1050 ti will run quite happily on the old psu! Waste of time this video

[@serenitysuccubus9231]

@@stickyprickle with the money they wasted on that psu and adaptors, they could of easily gotten a xeon e3 1270 (the xeon version of the i7 2600) even in this time of parts inflation, that psu runs quite well even with a slightly more demanding gpu such as the 1650

[@nurhudamuhammad8927]

@@serenitysuccubus9231 does Q67 chipset support xeon? i thought the maximum support is i7-2600

[@serenitysuccubus9231]

@@nurhudamuhammad8927 update your bios and you can easily do it, that xeon is a socket 1155 as well

[@nurhudamuhammad8927]

@@serenitysuccubus9231 thanks for the info

[@BenMatthews1984]

No need to upgrade the PSU and make sure you use the 16x PCIe slot. Did the same hear and it’s all neat inside the case with the original PSU!

[@austinteal3645]

The graphics card Might have not got sufficient power! Let alone the other electronics!

[@patrickbernard62]

The video is alright but you did not actually install psu in the case which is misleading

[@MrSandpit123]

I was wondering why you had the SATA cables plugged into the two slower sockets at 3.0 GB a sec, rather than the 6 GB a sec blue sockets?

[@osamaaljabri-s5v]

@PcLaptopUpgrades thank you for the video, I have HP 8200 ELITE SFF and I want to follow your steps but can I use an another GPU except GIGABYTE GeForce GTX 1050Ti 4GB Low Profile OC Edition

[@PcLaptopUpgrades]

You can if you find another Low profile GPU card

[@garymooo]

The black one is the top pci16x for video cards!

[@pistolduce1230]

What do I do if my gpu does not fit in my computer? It has the right number of pins and is compatible but it doesnt fit in the case I am using. Could I cut the bracket in order to allow for a larger gpu?

[@blam1711]

you can

[@pyotrleflegin7255]

This is a marvellous video tutorial. Thank you for making everything so clear and easy to follow. You are a great PC tech!

[@sashap8222]

Before i bought HP 8300 SFF i knew almost nothing about computers. I would never look inside even to clean dust. When bought HP i needed to put another RAM into it. That was the whole new level project for me and beginning of new hobby. For the last week i learned about computers more then i did for my whole life. Last night i learned that i can install I7 - 3770K in my motherboard(second hand of course). I have a question. What would you think- Will my motherboard allow me to have my I7-3770K overclocked? I checked it is compatible but i read even if there is compatibility, sometimes older motherboards are not able to have processor overclocked. I already have my 450W PSU arriving soon. Will 450W of power be enough to run - overclocked I7-3770K, GTX1050Ti Low profile, 1SSD, 1 HDD, 4 sticks of RAM, Audio Interface with connected condenser microphone, Wi Fi stick, managing 3 screens and do 4-6 hours a day of video editing(beginner and medium lever of complication) at the same time? I bought this PC to learn video editing. I really liked how you did yours in this video.

[@PcLaptopUpgrades]

I am sorry for not answering to you earlier, because I was on vacations. I have four computers and I have never used overclocked on them. My suggestion is procced with the upgrades for the 8300 and use overclock if you really need it. You must be very careful with overclocking because if something goes wrong, maybe you want be able to use the computer any more. For my video editing I use Dell laptop I5 5th generation, 4gb RAM, 1TB HDD, GPU with shared memory from the computers RAM. Nothing special and I am ok. For the PSU, the more watt the PSU has the better. The computer will start with 450watt PSU but if it goes to it's limits restarts or shutdown will occur. That's why before buying something for the PC you must first take a look with compatibilities and then buying them.

[@tejvirmundi7515]

How does the psu fit in the case

[@OnBrandRP]

XSGOD Gaming It doesn’t without case modification!

[@Animalwon]

I watched this entire video to see how he replaced the PSU and he didn't. Wasted time, Watched all this to see nothing new.

[@kyqg2606]

@@Animalwon Same here. I'd love to see if someone found a 400+W PSU that actually fits. I can't risk having it sitting around with wires all over the place.

[@prabhdeep8947]

I have a micro ATX cheap case i fixed a 550w psu no problem...

[@karlnigan]

The GPU is at the wrong place, on the 4x slot instead of 16x slot, plus the heat from the CPU goes directly in the GPU at this place. And last you don't need more than the original psu given at 240w, I'm sure full charge at the wall you have 180w max. You should not underload the psu, always keep psu busy between 40% and 80%.

[@Romerco77]

I have almost the exact same configuration, except it is an HP Elite 8300. I measured the power consumption and it does not exceeds 160W ever under heavy load, the 240W original psu is fine. Also you installed the graphics card in the wrong PCI-E Slot. You installed it in the X4 slot while the brown one is the 16X slot intended for graphics cards. Also, TFX and SFX Psus exist, those are cheap, there are 500W models and do fit inside the case

[@alexb3369]

You set video card in 4x slot 😂 16x is black

[@OnBrandRP]

Alex B it doesn’t really matter tbh. Only a 1fps difference!

[@exe7936]

The 4 has more power in it , if u put it in the black one it will kill the gpu

[@OnBrandRP]

@@exe7936 That's completely false.

[@exe7936]

@@OnBrandRP nah am talking from a previous experience I have a similar one the (hp Compaq elite 8000) and the x16 pci killed my gtx 1050ti so I had to buy another one

[@alexb3369]

@@exe7936 Now i use the same hp but gpu 1030 when my 1050 came test of course. Sorry for my bad english)

[@jamesmdeluca]

Greetings: have a similar HP but AMD motherboard. On mine only the black PCI-e slot was x16, while the white slot was only x4. If your graphix card seems slow you might check your mobos spec's for those slots.

[@walterlegere1403]

Not sure why you went to all that trouble to change the PSU. Mine is an HP EliteDesk 800-G1 SFF unit that was a 4th gen i5 system. It's now a Core i7 4790, 24GB DDR3 RAM at 1600MHz, 128GB SSD drive and a 1 TB storage drive, 1300GBs internal WIFI card running at 5G, it also has a GeForce GTX 1050ti low profile GPU all using the stock 240 watt proprietary PSU and the stock CPU cooler. The system is quiet, stable and is very fast. Passmark system score of 4790 and over 100fps playing Diablo III all on high setting. This thing is pushing a 44" 1080p smart TV for a monitor without breaking a sweat. I've got about $385 total in the whole system (minus the TV, of course) I got that free from my brother.

[@abbesatty9498]

We missed the best parts, the Power Supply fuc*ing Unit and how it fits on this little duck.

[@Shakeem]

Abbe Satty lmao

[@gianni4630]

I have same PC and i want change PSU, but the problem is the format PSU because format HP is different from other formats. How did you adapt your PSU to the HP case? Are there PSUs with HP format but more powerful? Thanks

[@stevecurrier2462]

You didn't show installing new PSU. How did you mount it? Did top fit back on? How did you get away from the TMP 2.0 requirement??

[@warlockboyburns]

You don't need to replace the PSU but I did put a quiet fan in it, 4-pin. And the CPU fan as well.

[@l0wstrength]

I have same pc ans this tutorial IS amazing!! Thanks man!!!

[@Atlasman]

Hey man, could you tell me please, what is the form factor of this motherboard? Atx? Mini itx? And can I transpose it to another computer case?

[@PcLaptopUpgrades]

Good evening. It's an ATX MB but you can't transfer it to another case because the backplate connectors are in completely different positions than the usual motherboards.

[@Atlasman]

@@PcLaptopUpgrades ok, thanx a lot

[@ztbang7365]

Hey, do you have any case recommendations?

[@Malcolmtv8200]

where did that psu go

[@PcLaptopUpgrades]

Thegamerkeemo56 the original PSU I am not using it anymore.

[@rickss69]

@@PcLaptopUpgrades He wanted to know how you mounted the new psu...I suspect you just connected it and left it outside the case since you showed no video of it's whereabouts.

[@kartman74usa]

@@PcLaptopUpgrades But how do you change the new PSU in the old case? did you use that case? thnx

[@ilhambarlian1853]

@@PcLaptopUpgrades so the psu is not in the case? Its outside the case or what? Im planning to change psu sooner if I need..

[@whizxcoffee]

@@ilhambarlian1853 he left it outsite the case since it doesn't fit in the case lol

[@PcLaptopUpgrades]

I keep reading your comments about why I have used 500 Watt PSU and not leaving the original 240 Watt PSU. People think. You are using a device that needs, in my case Gigabyte 1050ti LP OC, 300 WATT RECOMMENDED PSU (this is not from my head but I HAVE READ IT IN GIGABYTE SPECIFICATIONS), and some of you are still thinking leaving the original PSU and not buying a new one. 1. The original PSU is only 240 WATT. My GPU needs 300 WATT to work properly. What will happen when things get tough. You will burn it down. It's that simple. It needs POWER and you are not giving it to it. 2. You are buying a device that it's price is almost 300€, or 300$ and you are using a PSU that it's price is almost nothing, less WATT that you need and working hours are huge. You must protect your NEW GPU. 3. Yes the difference between the ORIGINAL PSU and the GPU WATT is only 60. Who cares my GPU NEEDS 300 WATT PSU not 240. 4. Yes it's a LOW PROFILE CARD why change the ORIGINAL PSU. Because GIGABYTE RECOMMENDS 300 WATT PSU NOT 240. 5. We always read the manual. We don't do jobs in computers without taking advice. We don't do things from our head. the result will be burning down the system and spend more money buying a new one. 6. I have used 500 WATT PSU because I had it spare and it is working fine until now.

[@reviewrustyitalianasscrack9996]

Dude , i have an HP 6200 mt with a 240W PSU same as yours ,and i upgraded to the very GPU u have and its running exactly as it should . This new PSU you've upgraded to is only needed for higher end gaming GPUs that require a PCIE cable , like the gtx 1060 and above , come on man!

[@Rydogger]

The PCI-e slot can only output 75 watts. That card is not using external power.

[@nemesisblack00]

"PSU is only 240 WATT. My GPU needs 300 WATT" never touch a pc again, if you clearly have no idea.

[@harryspapadopoulos21]

Ρε ψηλε τι λες;

[@vj6257]

HAHAHAHA LMAO, OLD PSU = 240 watts GPU RECOMMENDS = 300 watts But the thing is the motherboard can output 75watts max for the pcie slot. They should be worried now where to put that PSU haha

[@riccardopaganelli7251]

Tell us why you show the Cooler Master 500w; you can't have it mounted. missing a piece of video, how did you put it? I have an HP 8300 Elite. It's impossible.

[@sobanahmad8022]

Great video!the steps were really easy to follow!

[@slytherin9090]

Did you change the pins on the power supply cable before plugging it in the motherboard?

[@PcLaptopUpgrades]

Jasper John Cinatad I changed the order on the white 4 pin cable connector on the 24 pin to 6 pin cable adapter. Take a look at the original PSU white 4 pin connector and do the same order in the adapter.

[@slytherin9090]

@@PcLaptopUpgrades Thanks!!

[@archivo0001]

This video is just enjoyable at the velocity 2x and skip parts

[@zadrox8821]

Am un 2023 and u save life for my pc elite I was get a gaming pc and relieving card mère of my hp pc and I was cringe PCU SO I BOUGHT ONE ANOTHER AND IS WORK TY U BEST

[@tiberiusiulius2088]

So where did you place the PSU ? Outside of the case ? I gave a thumbs up because i found out about the 24-to-6 pin adapter. But dude... you spent half of the video tightening the VGA plate.

[@salaciouscreations4323]

I am yet to get one of those PSU conversion cables to work.

[@juanduque7983]

im wondering about possible overheating issues, if that cpu cooler is exhausting or in-taking, theory is if it is in-taking and pushing hot from the cpu to the graphics card area then the GPU could be runner hotter than normal, just a thought

[@hypedlele]

Reply after 2 years yes but it won't drop performance just try to not over clock it and It will be perfectly fine

[@TheGaggenau]

The stock psu will handle that gpu without any problems.

[@davidvelasco7295]

Hello friend a question can I put a graphics card a hp elitedesk 800 g1 sff i5 4570 to a gt 710 2gb ddr5 I do not know if it supports the power supply 240 watts

[@blanchemiguelwalde7957]

Where the heck did he put the PSU?

[@fortstar1563]

I asked for it. Do you need to modify the HP Compaq 8300 Elite sff

[@leksbeet662]

Sorry but default HP PSU has pins 1 and 2 for PSU fan control. You plugged them as ground (COM). Does it really work?

[@liamfurlong5612]

I have that same PC all I did to get it game ready was bung in a GTX 1050 LP and called it a day.

[@martindoiron66]

I 've watched thousands of videos on KZbin. This one is, to say the less, the most ridiculous one Ive seen so far! It should be called: "Incredible set-up with full air access for PSU!" Can't believe you stole 30 minutes of my life! ... Made a set-up on day where my PSU was outside the house with a 50 feet cable to my PC... Great....

[@SupremeODMG]

This was great videonexcept ypu put videp card into pci x4 instead of the black x16. also the psu does no lt fit into case?

[@Avigazed]

I have just replaced my HP 8300's dead power supply for another 230 watt one. I didn't even know I could get 500w version.

[@OutlawJJ80]

What about the power supply...how did it fit!!??

[@freefromit2]

A lot going on here. empty ram slots, gpu plugged into the wrong slot, no pic of the power supply actually in the machine, or the cover closed. I think i'll be moving along now.

[@ari.2406]

I've got a question. I own this PC and since I'm starting to run out of storage (500GB HDD), I went to spec sheet on HP's website. Apparently, there are two internal 3.5 inch drive bays. Does that mean I can add another HDD (not SSD) which would ideally be 1TB 7200 RPM? (since that's what's supported according to spec sheet). Would it be a harm for the 240W PSU inside it, running two drives simultaneously? I've never added a GPU, SSD or any additional hardware inside. Thanks in advance!

[@SweBeach2023]

You have four SATA ports, so you could as long as you find the space install as many as four drives. 2x 3.5" and an optical drive is kids play. You could also remove the optical drive and install 3x 3.5" drives. Or you could remove the optical drive caddy and install 4x 3.5" drives. You could even with a bit of modding and a pci-e sata card install 4x 3.5" drives and 4x 2.5" drives. But that certainly seems like overkill. :-)

[@donkiel9988]

Did you change the order of the cables on the 6pin connector as some other posts suggested (due to the fact that the adapter ist designed to work z220/z230 workstations???) as described for example in linustechtips.com/main/tags/power%20supply%20adapter/ I am planing a build based on a HP 8300 CMT (proper desktop, native USB3 support, same shitty PSU design though and maybe different cable layout...).

[@PcLaptopUpgrades]

Don Kiel I changed the order on the 4 pin cable in the adapter. I checked the colors of the pins on the original PSU and put them in the correct order.

[@donkiel9988]

@@PcLaptopUpgrades Ahhh, maybe I got some things muddled up there. Thanks for your reply, I really appreciate it! It helps to focus if I start "the next project"!

[@АлдарКөсе-о1к]

Thank you I’m find this video where have you been!!!

[@travis7956]

I seem to have screwed myself.. got a Gigabyte 1070ti GPU and installed with a CX550 PSU but seem to be missing only the 4 pin connector... hoping I can find a 4 pin adapter otherwise I'll need a different PSU

[@cmpunk_bitw9867]

Is it possible that the power of this pc is damaged? Suppose i7 2600-gtx 1050 ti-ram 16 is installed in this system. Is there any problem with this pc with 240w electricity?

[@renko8065]

Why would you bother replacing the psu if you bought a low profile graphics card? And you put the graphics card in the wrong slot.

[@franklinmontero017]

I have a motherboard, similar to that hp. and I can't get it to turn on with a generic power supply, in a generic CASE. I bought a 24pin to 6pin power adapter, but I can't locate the pins To turn ON / OFF on the motherboard 😭

[@Abderrahimerror]

is this applicable to 6300 pro sff? the motherboard looks the exact same.

[@PcLaptopUpgrades]

I haven't seen inside HP 6300 SFF, yet. As I said in other comments you can buy the 24 pin to 6 pin cable adaptor, it's cheap, and if it fits then proceed in buying the other devices that are needed.

[@elephant3680]

wach l9iti fin tchri dak cable adapter ?

[@OnBrandRP]

You can still do it but if you're using a low profile gtx 1050ti that doesn't require the 6Pin Cable you don't have to use the adapter, the PCI-E slot can provide more than enough power of up to 75W and in a fully upgraded HP Compaq 8200 (pretty much all HP Compaq models are the same from 6300-8200) only uses 130W out of your 240W.

[@Nakasuku]

Can i use any 24 pin to 6 pin adapter for my dell MT 7050? I’m frustrated I can’t upgrade the pc because of this annoying 6 pin 💔😓

[@26shadez]

Can u do the same for prodesk 400 g5 sff?

[@osmogaming001]

the 12 v power connecter you connected is it the cpu power connector? and first the optical drive and hdd were powerd by sata connector connected to the motherboard aftre the installation of new psu they were connected directly to psu sata power?............plz answer!!!!!!!!!!!!!!!

[@PcLaptopUpgrades]

Yes all the devices are connected directly to psu sata power

[@osmogaming001]

@@PcLaptopUpgrades is the 12 v connector the cpu power connector

[@dezenove8449]

I'm willing to do the same thing w/ my Compaq 6300 (i5-3470), do you thin that a Mini Itx GTX 1060 fits in the case?

[@PcLaptopUpgrades]

Card size Anakillaz The dimensions of the GPU card that I have used are H=37 L=167 W=68.9 mm. Check the dimensions of your card similar to mine, if the PC case is the same.

[@florentzogaj4167]

I have the same atx to sff cable but it doesn’t work and i dont know why ?

[@alber9100]

La gran pregunta... donde queda la fuente de poder (Power Supply)

[@popolkupol6948]

What the point replacing your PSU for GPU which is not require an additional 6/8pin power directly from psu. Also u put gpu in the wrong socket, in HP's motherboard white socket having a PCIe x4 and have less power from motherboard, u need to put in black socket which is PCIe x16, and it have max 75watt from motherboard. But anyways thanks for 24pin to 6pin cable reference.

[@hpcarlos2255]

Cool Guide : did you make that splitter : 24 to 6 for motherboard - I need it 🤔

[@1314pankaj]

Order online

[@omkargosavi9297]

What if my motherboard has gpu slot is at the bottom of cabinet And there is no ventilation for fans to pass out the heat of graphics card Will it be ok?

[@aislemod2878]

Hi can i ask, i bought the 24 pin to 6 pins dor my sff compaq..alright but it doesnt have the second white cable? So can i plig it?

[@thenuclearcreeperYT]

Can it be the ram that came with the PC?

[@rebekacosta3639]

this motherboard is HP 3396?

[@guanacoberlines]

hello I would like to ask again something about this pc I would like to know if it supports 2 NVIDIA graphics cards in SLI mode because I see that it has 2 PCIe x16 slot

[@PcLaptopUpgrades]

Gamers Forever the space between the two PCIe slots is not enough to connect another GPU.

[@guanacoberlines]

@@PcLaptopUpgrades yo tengo el manual en donde dice que para instalar tarjetas gráficas duales la principal debe ir en la ranura PCIe x16 y la otra en la ranura PCIe x16 x4 entonces al instalarlas con un adaptador cree usted que funcionarían en sli, porque el espacio que hay entre dichas ranuras tienes toda la razón no tiene el espacio suficiente pero con adaptadores me imagino que se podrá bueno me arriesgare a invertir en eso haber que tal me va y sino tendré que comprar una nueva motherboard que los soporte y te agradezco por tomarte el tiempo en responderme.

[@OnBrandRP]

@@guanacoberlines The motherboard doesn't support SLI, and even if it did you would need PCI-E Extender Cables and a case modification to do so.

[@guanacoberlines]

@@OnBrandRP well I understand thank you very much for clarifying my doubts. greetings from El Salvador

[@paulinerutherford4958]

watched to see you install the ps in the case ....and you don't what a waste of time

[@OCTUV]

@pc laptop , can I transfer the new parts and the motherboard into a different case

[@tonifatec]

You will need a BTX case. The easiest way is going get any series of the MT (Micro Tower) case from HP as well.

[@ernestoolivares3182]

sabes si ese adaptador sirve para la hp 280 g2 sff ? igual es de 6 pines solo que nada mas 5 estan , son dos negros ,dos amarillos y un verde

[@markc5413]

Some low profile GPU cards don't fit inside the case, like the GT 710. Hacksaw mutilation later it fit - the VGA DVI HDMI part was too high. Not sure about the 500w PSU - did it fit inside the case? Who knows. This guy loves his GPU i think.

[@nsvaluto48328]

Wiil this pcu work for this build?Cooler Master V550 550 Watt 80 Plus Gold SFX Fully Modular Power Supply

[@shaziarubab8760]

Can't we just use the gfx card 6 pin connector?

[@haydenroan9996]

Where did you put the psu?

[@ImNXVS]

He left it outside, it wasn't listening when he wanted it to be in the case, so it went for a time-out...

[@guanacoberlines]

How much is the capacity that RAM supports the hp 8200 sff because I have one but I do not know if it supports 32 gigs or only supports 16 gigas, take me out of that doubt please

[@PcLaptopUpgrades]

The Motherboard supports 32GB ram. I have installed 20GB, 16 new and 4 old.

[@guanacoberlines]

Pc Laptop I want to thank you because you got me out of doubt then I will try to put more ram to my hp 8200 sff thanks from El Salvador.

[@OnBrandRP]

Depending on the model 32GB DDR3 Ram. Some models can only support 8 and 16GBs of DDR3 Ram.

[@Shakeem]

I watched this video to see how a bigger PSU will look in the case. And I thought I was crazy like where the PSU lmao

[@GiancaTech]

Keemborghini me too but never showed how!!

[@Animalwon]

He never did put it inside, he left it hanging outside by its wires.

[@bgsrickus]

Well what I did was mute this music & played GRAVEYARD TRAIN by CCR on a different video for the background music. Made this video more enjoyable for me. 3x of GRAVEYARD TRAIN is pretty much satisfactory for my taste's

[@stephenalfaro5518]

Is the adapter the only thing need if i also want to change the pc case?

[@miladsayyad8523]

Why????? Gtx1650 and corei7 4790k end

[@michaelrheyamper9253]

Where is PSU. I didn't see on the video. It's realy nice. i just wanna plan to upgrade my pc HP compact elite 8200 same on this video..

[@jerzypietak5291]

looking for 24pin to 6 pin cable but in configuration for hp 705 g 3 station ?

[@stanleyvrbeaudet3721]

You still did not show us were You put the power supply

[@nahpets2345]

Does the PSU fit in this Small Form Factor Case?

[@kekkodance]

no....

[@applec.397]

Can i do the same things for my old HP compare 6300 pro SSF. Especially, the power supply? Thanks! I have 240 watt PSU, and wanted to upgrade to >300 watt since most of graphics cards need more power.

[@ernanfer2]

Hi...how are you? ...i have a hp 6200 pro sff , I want to change the psu ...is it work for me ?

[@rv9812]

And if we want to close the cabinet?

[@Animalwon]

I need to replace Original PSU with a new, INTERNALLY MOUNTED equivalent - Does anyone know what form factor PSU would fit these SFF sized computers?

[@enoccalzada]

I have the same pc same model I want to give this same configuration gpu and usp but I want to have 32gb of ram any suggestions, advice I would appreciate your help.

[@leksbeet662]

24:51 - it's not OK you put it into PCIe x4 not x16. The black one is x16;) you need to install it again.

[@jackintosh3423]

Hi,so i want to do this and swap it to another case but dont know how to

[@PcLaptopUpgrades]

The Pikachu Fam I tried to change the case before doing the video, but the M/B connections are in different positions than the normal ones. You need to find a case similar to the original.

[@jackintosh3423]

@@PcLaptopUpgrades yeah,i know i might just get a new pc then

[@OnBrandRP]

The Pikachu Fam General rule of thumb, if you don’t know what you’re doing don’t touch anything. Like PC Laptop said, Most OEM motherboards and cases are using proprietary connections that most other cases don’t use. Technically you could mod a case to have those connections but it’d be a bit over doing it.

[@jackintosh3423]

Hahaha,i was working very hard and bought an rtx 2080 ti of course with i9 9900k and 16gb ram,it was a pain but worth it,now i can play minesweeper

[@OnBrandRP]

@@jackintosh3423 Really? I'm surprised you can run that with that dated pc!

[@Askejm]

That PCIe 6 pin connector you plugged into the custom 6 pin HP connector is wired differently. Don't use it you'll end up frying the motherboard