HP 950, HP 951, HP Officejet Pro 8600, 8610, 8620, 8630 CISS

HP Officejet Pro 8600, 8610, 8620, 8630 CISS
if any refill question, please contact [e-mail]
Attach pictures and description

[@janjuahouse]

Dear Sir,I have not seen such a beautiful demonstration video as this. I feel like to experiment it though I don't have this printer, but excellent demo is assuring me that if I will try I will be able to do such like a neat a professional job...indeed credit to your video. Thanks.

[@terrencearturo7750]

you probably dont give a damn but does anybody know a trick to get back into an instagram account? I was dumb forgot my login password. I appreciate any help you can give me.

[@devonhunter1874]

@Terrence Arturo Instablaster :)

[@terrencearturo7750]

@Devon Hunter thanks for your reply. I got to the site thru google and I'm waiting for the hacking stuff atm. I see it takes a while so I will get back to you later with my results.

[@terrencearturo7750]

@Devon Hunter It worked and I finally got access to my account again. I am so happy:D Thanks so much, you saved my ass!

[@devonhunter1874]

@Terrence Arturo Happy to help xD

[@vizorri_2347]

Perfecto...Paciencia, Prolijidad..Ojala se vendiera esos repuestos en Argentina. FELICITACIONES por ayudar aquellos que no pueden comprar tintas, es una ayuda muy valiosa. Saludos.

[@HECKAKYH-ADEKBATEH]

This has a lot to improve. 4:15 no need to remove sticker, just put tape on lower opening below "REQUIRED FOR SETUP". 5:50 no need to drill or plug, just use glue gun. 7:29 no need to cut like art - risk to tear tubbing, just cut straight down and use glue to attach clip from bread bag. Also much better to attach ink tube near bottom, not at height. CISS tank at 14:51 looks like big problem to refill... 18:18 BAD idea - you cant watch ink level and will destroy ink inlet if you repeat this over time. Just make another hole above the ciss one. 27:00 much better to place tank to left than to right, can lead the tubbing into the tray slit on left. Pause at 30:50 you have problem with this ciss... needs too much pressure to pull... Also install ink dampers, so ink doesnt travel back into tank.

[@refillhouse]

It's perfect, you are great, you watch the video very carefully, and give comments and explanations to those who watch the video, one more comment for reference. Any small step may affect the ink supply.

[@holcyonfold4976]

I followed your instructions and my Hp 8100 looks great, I am extremely grateful to you, will you have any manuals for the HP 6970? first of all, Thanks

[@Free2choose]

Absolutely RIDICULOUS to expect the average person to have these skills to perform this complicated plan

[@petesson1880]

Only if they've had a stroke and are paralyzed. Otherwise any person with eyes, a brain, and hands can do this. Now if you were a squid say, or an elephant, then I could see your point.

[@jhonperez9037]

Hey solo un latino por aca, gracias, como siempre videos de calidad

[@hebertbolanos2075]

muchas gracias hermano es un gran ejemplo de projimo el poder enseñar a los demas

[@asmunimultimedia9694]

sí a la derecha

[@borisojeda7763]

Hola muy interesante y estupendo 👍 me encanto la idea. Si me pudieras decir donde puedo conseguir el kit completo de Recarga de cartuchos de tinta me encantaría intentarlo...y gracias por tus videos instructivos..👍🇵🇷

[@juanlangarica2511]

En mercado libre venden

[@abduo14]

A wonderful video from a wonderful person. Greetings to you. I have a question, from where can I buy the hoses, the inks and the parts that have been installed. I am in Egypt

[@alwcurlz]

Great presentation! Looks like a lot of planning to accomplish the purpose!

[@vitalisemak5702]

Hello, have you refilled the hp 712 cartridge, it would be interesting to see the process of refilling or installing the non-stop ink supply system on the hp desingerjet t230

[@PureBlood42]

8630 was working fine. My magenta ran out. Replaced cartridge and immediately started getting printer failure error. Replaced magenta cartridge again and at least now the printer is allowing me to navigate to tools options. Printer is insisting magenta cartridge is damaged and when I view ink levels, printer says magenta cartridge is empty.

[@gustavobecerra4613]

que recomiendas mas soldar el cabezal o colocarle unas (U) es una hp 8100

[@roncruse5322]

The information for clearing paper jams was great, job done.

[@Lilmiket1000]

So do you have to keep sucking the ink through to the cartridge every time after the cartridge is empty again? or does the printer keep it flowing on its own?

[@HECKAKYH-ADEKBATEH]

the hp950 has two airpaths, which are seen when he pulls away the sticker. The one that comes from side to upper middle is air for airbag inside, this is for cleaning and air is automatically pushed back by spring inside cartridge. The other comes from middle of cartridge and goes to lower end - this one leads air into ink chamber after lack of ink creates negative pressure. There is a tiny ball inside that opens up to lead air in. Only this one needs to be closed for CISS, then negative pressure will suck ink from tube. But he misses dampers between CISS and cartridges, dampers are one-way valve, they prevent ink from flowing back into CISS tank for example during cold nights.

[@freedomvenezuela]

great work, impeccable.

[@madamtechster]

Perfect presentation for recharging ink cartridges 👍

[@Phone-Center]

Do you need any firmware tweaks to make this work? What is the lifespan of a cartridge?

[@charanreddy4821]

Simply Superb NICE VIDEO I HAVE EVER SEEN..... Can you make me 1 set and send me, What will be the price.

[@nancyjones7932]

Where does one get this kit, and how much is it?

[@adityaawasthi5967]

What is the ink type for the original Cartridges, is it Dye or Pigment based.

[@refillhouse]

HP 950 Original ink cartridge Compatible ink types is Pigment-based, printerhead Ink drop is 12 pl.

[@DisappearingBoy2010]

I don't love that there is no way to close the printer door after installation. Any thought at drilling through the side of the printer and feeding the tubes through?

[@julianweiser9985]

Go ahead.

[@Drew-Dastardly]

But the chip on the cartridge will "count" the ink and when its "empty" refuse to print. Surely this means its an IISS (Intermittent Ink Supply System) vs CISS (Continuous Ink Supply System) as you have to keep removing the cartridges and then sourcing the chips to replace which end up costing more in money and hassle than getting carts refilled at Costco? Or do you supply a couple of hundred chips with your kit?

[@refillhouse]

Before Modify to CISS, remove the # 1 ink cartridge that has no ink level and insert # 2 ink cartridge with ink level; Use # 1 ink cartridge to modify, after installation, will not have your problem

[@scadcam]

@@refillhouse what do you mean with "#1 ink cartridge that has no ink level" and "#2 ink cartridge with ink level" ? You mean an empty and no empty cartridge?

[@RustyRaceHorse]

can i just mail you my ink cartridges so you can do the exacto knife thing...? I'd buy one then ! or them...

[@ronf57]

Always be aware this ink is water based and I had a leak in a different system years ago and it got on my carpet in my home office. The worst thing you can do is what I did using a industrial carpet cleaning machine. It used water with cleaner and spread the ink colour further throughout the carpet. The carpet naturally wicked the water with the ink color in all directions. I had to remove and clean the floor then replace with new carpet. HP had these types of systems for years on their professional plotters. Why they don't offer this as an option on business printers can only be profit on ink cost.

[@refillhouse]

External ink is put too high, causing the external ink to flow to the nozzle, in the drain to the outside, dripping into your carpet, Our system does not have this kind of problem

[@diannebennett8200]

So my question is this. If the kit is $1,200 and you almost used all your black, how long does this refill kit last and is it worth the time expense you put into this. I admire the ingenuity of your resourcefulness and skill but the cartridge is $96 as opposed to $1,200 for the kit. I'm weighing the costs. Can you comment?

[@refillhouse]

According to the Video installation, you can get cheap printing costs, CISS kits set is cheap, If you have further comments, please contact

[@heyitsedyy0375]

+Dianne Bennett hi i just looked at the website and its $1,200 in Taiwan dollars not usd so if you look in the near to top left it will show you the currency. i hope i helped. most of the stuff is actually $40 usd

[@iainwaghorn6715]

+Dianne Bennett - you can re -prime the ink as many times as is needed, using the syringes, to the top of the ink bottles. buy the ink in commercial size bottles.

[@GnarledSage]

So professional. Mine was made by a stupid guy. He just hot glued everything. Now everything has fallen apart. I can fix it now thanks to you. I have one question: where did you get that hand drill?? How is it called. I need one of those. Thanks in advance for your answer.

[@refillhouse]

The handle drill is 4.0 mm,

[@centraldefaturas1309]

Onde consigo as presilias ? OTIMO VIDEO

[@abraaod.k2291]

minha hp pro 8100 passou 4 parada vale apena compra os cartuchos?

[@abdullahalmeshari9604]

عمل رائع جد هل يتوفر في الخليج وماهي الاسعار , التكلفة

[@hectoraymo9963]

Great tutorial, muchas gracias!!

[@policarpiojrgonzales2349]

"I Love This!" 😂☝️♥️

[@tamito9298]

Can You explain - why did You restuck labels between sides ? What and why did You do on 5:36 ? Why all install cannot been started from 7:17 ?

[@refillhouse]

1. Remove the original label, you will find a groove, into the ink cartridge Vent, more information, see US Patent Document US009056479, (www.uspto.gov); use new label to close the vent. 2. HP 950/951 setup cartridge, in the top of the ink cartridge is empty.

[@tamito9298]

Thanks. I have understood about label. But why it was necessary to drill one more hole от 5:36, that then at once on 5:53 to stop it up and glue it up ?

[@refillhouse]

This is HP 950 vent hole, use a plug to closed.

[@tamito9298]

Thank You ! Great !!! I`m going to do the same. Your video is a best. Thanks

[@euclimarpereiradesales4258]

Bem enteresante o vídeo aula muito obrigado 👍 gracias, penquil

[@emoneyblue]

Well done video

[@ddredd99]

does the tube ink dry up over extended periods of non-use?

[@flmamabear2]

Keep getting message "your printer is offline". I use a linksys router and have to toggle between internet connect and the linksys router for printing. How do I get my computer and hp officejet pro 8620 to communicate?

[@franktheman149-new]

I like this music I don't know why LOL

[@taoufikelyoussoufimarouan5866]

Hola, donde puedo comprar cartuchos recargables para HP Officejet 8014. 912XL. Gracias

[@diannecochrane9329]

My ink cartridges kept popping back out when I first set it up. Thanks for all of your advise.

[@udayanraj2370]

Thankyou Sir for a great tutorial, but just wanted to ask about the catridges : were these used and empty catridges ? were new and empty catridges? or new or full catridges? . . . . Thanks in advance.

[@refillhouse]

Each color inside the nozzle has an ink level sensor chamber. The ink is out of the chamber. You must fill the ink to the chamber, printer will be continue to printing. If you can not handle it, you can purchase the subsidiary chip or purchase the original ink cartridge. The ink cartridge of the factory can make up the problem by filling the ink in the ink level sensor chamber. Modify ink cartridge can be use any.

[@sadiqueshaikh6929]

what is the purpose for drill hole and again seal it back , in black cartridge ?

[@rossmarino2776]

If only HP ink cartridges were not so damn expensive you would not have to do all these hacks...

[@HECKAKYH-ADEKBATEH]

There are printer models with CISS from factory. But they are never as cheap as custom CISS. But this CISS needs you to know your printer model well.

[@MuziqVids]

I need this for me. How can I have someone install this system on my printer? I am in Miami, Florida, USA.

[@lukacyber2241]

Hello sir, what kind of ink should I use for the Officejet PRO 8620! thank you!

[@refillhouse]

OCP DeskPrint Inks, BKP 280, CP 280

[@sevenangelx]

eso es tinta de sublimación?

[@ddredd99]

Can the ink reservoirs be refilled when low?

[@MrKaeme10]

gracias ...desde colombia

[@sadiqueshaikh6929]

only setup cartridge should be used or new cartridge after empty can be used ?

[@refillhouse]

I only use one set-up ink cartridge, it can't be depleted.

[@grizbare]

Wow! Very impressive! Add a mod so the pages come out smoothly (page snagged the door at 30:53) and this would be perfect!

[@jylimports]

do you sell on ebay or amazon?

[@sadiqueshaikh6929]

what is the purpose for drill hole and again seal it back ?

[@kenmaruska5818]

Why is that none of the companies in this industry seem to understand that priming is about removing air from the system/cartridge. This video doesn't even show the exit ports being held at the highest position to remove the most air possible during the process.

[@refillhouse]

in video time 15:30 - 23:00 display the exclusion of air of the inside the ink cartridge and guide ink into ink cartridge from ink bottle

[@ahmedosman7759]

I have fixed a new printhead but the issue still there. I received the message "the printhead appears to be missing, not detected, or incorrectly installed. Error code: 0xc19a0046. What I do next? Thanks in advance. Ahmed

[@admiralkirk007]

Very Wise

[@oliveirajr06]

Parabéns!!!! ótimo trabalho.

[@refillhouse]

Thanks.

[@michaelm2343]

Looks like more work than, it's worth. You gotta buy all of these tools and then a refill kit plus ink. Guys look for promo codes like I do. Or just buy a new printer when the ink expires, almost the same price when you think about it.

[@superdavey69]

if you have a shit printer like you maybe

[@Sivitech]

wow. very great . Thankyou for sharing!

[@glaiberancallaflores8473]

Gracias por tu aporte...

[@RobynneTalbotScobie]

Hi, I would like to buy a set, and have gone to your web page, but am not sure where the length of joined hoses is. Can you help me with this so I may purchase a set. Thanks in advance.

[@refillhouse]

Please send your e-mail to [e-mail]

[@TheMexicomexico1234]

REFIL HOUSE DONDE PÒDEMOS COMPRAR TODO ESE MATERIAL, ESTE ES MI CORREO una pagina porfavor

[@refillhouse]

Please link www.refillhouse.com/index.php?route=product/product&path=18_45&product_id=149

[@yayavilla777]

I do not have the art or patience to do this, by any chance you sell it a ready done or know where I can buy it ready to set

[@HECKAKYH-ADEKBATEH]

Yes, buy original HP for 100x more money - fast and no problem.

[@Sharaf_Honor]

Super

[@RustyRaceHorse]

i imagine this would work well in an office where the printer is used a lot.

[@HECKAKYH-ADEKBATEH]

no, this is for normal use.

[@celiagonzalezavila2652]

Dónde puedo conseguir el material?

[@blametheworld13]

But is there any German website where I can buy these things ?

[@refillhouse]

please contact [e-mail]

[@JoRosieQueen68]

+Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 this inspired me to make my big FabricationStation as an adult!!!Excelent video!!!!

[@blissrunner]

+blametheworld13 Well, son. If you live in Germany try OctopusConcept Gmbh. They also have a youtube channel. They're based in Dresden.

[@cristobalinadejesus5026]

eseletebideo me gusta mucho ese programa jenial

[@refillhouse]

Cristobalina De Jesus Thanks

[@IdentityBG]

nice work!

[@josephnelson7625]

get a vise or some kind of clamp to stabilize when cutting?

[@refillhouse]

If deemed necessary, can be used

[@anthonyaguilus]

super

[@sadiqueshaikh6929]

any demo video for Designjet T510 large format printer

[@refillhouse]

Designjet T510 use hp 82 ink, please link www.refillhouse.com/index.php?route=product/product&path=77_81&product_id=115

[@nkjcom2013]

what about cartridges chips???

[@subratapaul6398]

sir salute you.

[@orgtechved7836]

Wonderfull. Ttank you.

[@JimBeshears]

what about the chipset in the cartridge? How is that overcome?

[@refillhouse]

you can change the original chip, read inkjet411.com/?page_id=4675, inkjet411.com/?page_id=3706

[@Tohita-Benson]

Nice job.

[@AliceSusanHarding]

Is this system available on ebay or Amazon?

[@ShabilChanel]

Can you modify firmware printer HP for solved depleted catridge?

[@refillhouse]

if any refill question, please contact [e-mail] Attach pictures and description

[@idriss6]

good work

[@papoutcheofficiel1089]

super cool

[@rameshrameshgowda9550]

any converson centre in india

[@babylonmexico753]

great

[@jasonszaro4432]

What tge flack...is this what I need to do when it says my print head appears missing or damaged? Im going to buy a new one... NOT the same HP giving me this problem

[@refillhouse]

Please download US Patent US009044939 www.refillhouse.com/Download/Patent/US009044939.pdf You need to troubleshoot the sensor The ways are: 1. Sensor chamber manually replenishes ink 2. Replace the decoder chip 3. Purchase original ink cartridges with ink level, which will be automatically added.

[@ALEJOACJ]

como se llaman los materiasles a utilizar para poderlos comprar

[@juanlangarica2511]

Kit para tinta continua

[@AliHaider-gg4nj]

great idea!!!!

[@chuaboonleong4325]

Friend is that can do it on Hp Officejet 7740 , kindly advise thank.

[@refillhouse]

We can provide filling tools and inks, it has a specific filling process Continuous ink supply involves copyright

[@drjonnyq]

THANK YOU SO MUCH

[@juanmarcelo2610]

hola si o is se deben cortar los cartuchos?

[@refillhouse]

1:48 use handle saw

[@ganivetjuliocernahuaman943]

@@refillhousehay alguna medida exacta para el corte del cartucho ???

[@marlapulsipher3624]

How can one get that set up.

[@GabrielALuna-ll5fc]

Excellent!!!

[@MrFidalgo77]

hi I'm having problem, with my hp 8610 printer , it keep saying the ink system pump has failed , can u please help _

[@refillhouse]

I need more pictures and instructions to send to the mailbox - [e-mail]

[@RustyRaceHorse]

Someone should show this to HP. They could make a fortune making this instead of selling ink cartridges !!! ...wait... uhhh... never mind....

[@elhannachhamid8774]

tbdfilmk

[@user-gv3qy6ot9r]

hola tengo una impresora 8620 y me dejo de reconocer los cartuchos no se que hacer y como solucionar este problema por favor ayúdenme

[@refillhouse]

Please description of your question

[@user-gv3qy6ot9r]

la impresora tiene sistema de tinta y los cartuchos que se recargan dejaron de funcionar la impresora pide cambiar los cartuchos por que están vacíos . cambie el cartucho magenta que inicialmente es el que presento la falla pero una vez realice el cambio dejo de funcionar el color azul y pienso que si cambio el azul va a dejar de funcionar otro de los cartuchos, pienso que es un problema con el chip del cartucho pero la verdad es que no se mucho del tema agradezco me ayudes por favor !!!

[@refillhouse]

Please download HP Patent document US 9,044,939 B2, US 8,474,960 B1 www.refillhouse.com/Download/Patent/US009044939.pdf www.refillhouse.com/Download/Patent/US008474960.pdf please read US009044939, page 7 - 9, and read specification page 16, zone 1, lines 51 to zone 2, line 35. The ink level in FIG. 9A, indicated by line 74A in chamber 68, is low and air 75 has entered fill chamber 68, for example when an ink cartridge has been depleted and replaced with a new ink cartridge. At the programming 42 on controller 34 initiates a series of pressure/vent cycles for the Printhead Assembly priming operation by starting pump 36 to inflate bag 62, pressurizing container ink reservoir 60 and pushing ink into fill chamber 68. The higher pressure in fill chamber 68 opens ball valve 82 to allow air and ink from holding area 76 to enter a return chamber 84. Then, at pump 36 is stopped and bag 62 is vented to the atmosphere to pull froth 77 out of chamber 68 into ink reservoir 60. The lower pressure in fill chamber 68 closes ball valve 82 and opens an umbrella valve 86 to allow air in return chamber 84 to move into fill chamber 68 where it can be removed to container ink reservoir 60. The pressure/vent cycle is repeated at block 816 until ink level sensors 78, 80 signal controller 34 that the ink level 74D is adequate for printing operations. The ink level inside your printerhead ink chamber is too low and the sensor does not start, because the chip shows the ink level of zero, Need to insert a set of ink level non-zero ink cartridge replacement, let the printer start, add ink to printerhead ink chamber.

[@user-gv3qy6ot9r]

muchas gracias

[@joseeduardopedrazaduran7694]

DONDE COMPRO ESTE MATERIAL?

[@refillhouse]

+José Eduardo Pedraza Durán I am in Taiwan, pleases sent one mail contact us

[@alsikdony1470]

How for HP Officejet 9020 ink

[@sendor777]

Is it pigmented ink?

[@refillhouse]

is pigment ink.

[@carolinagomezhernandez562]

hola yo quiero que me convierta la mia asi

[@Thomsen588]

nice

[@tamluu5799]

thank.Sir

[@Jeff-rg9io]

It did thanks

[@adan_galdames]

Quiero comprar ese sistema