3 Ways to Unclog HP 950 Printhead - OfficeJet Pro 8100 8600 8610 8620 8630

[@christinamarquez397]

thank you so much! this video is the only video out of dozens watched that actually worked. My HP Officeject pro 8600 was printing blank pages and now it is printing perfectly. Thank you again!

[@mars1952]

This technique worked very well and on the plus side, it provided me an excuse to buy a steam cleaner!

[@hector5445]

It worked perfectly with the steamer. Many thanks!!!

[@PhilDenton]

Thanks for the video, guys. Can't wait to try this out.

[@edessamediagroup8062]

Thank you for an excellent how to video, details, warnings and a great voice.

[@kirkwd8829]

That was awesome. I ohmost threw mine away due to not being able to clean it. Will try this process.

[@ariesr4883]

How much heat can that flex ribbon that surrounds the printhead take? Just wondering if that steam can damage it if stream stays on one spot? Btw what’s the deal about the ink waste tank... how do you reset it and does the counter have an expired count to disable the printer?

[@lordtachanka9323]

Dank speech bro

[@DrAmrCactus]

For how many minutes use the steamer can we use the hair heater blower(hair dryer)

[@emmettturner9452]

What do you call the steam machine? A pressure steamer? How much do they cost and where can I find one?

[@f15mechzz]

amzn.to/2AenwoQ

[@angelhelp777]

Where can I get the steam cleaner and the ultrasonic cleaner?

[@PFDish]

Great

[@f1lab535]

how much do you charge for this kind of cleaning...?

[@BCHTechnologies]

$50. You have to be local.

[@katerinaberhami3770]

what if I need to do this last minute and can't get my hand on the supplies you have

[@zsoltibitter8761]

I have bought a printer for cheap because it had the same printhead as my printer. But it was not used i think more than a year and the ink has totally clogged the nozzles. When i tried to clean it only the magenta passes a little bit of solution through. 99% of the printhead is clogged with dried ink. I have tried to submerge the bottom of printhead into hot water, then carefully inject distilled water with alcohol into it at all color locations but unfotunately the nozzles are completely blocked, i cant even inject the solution because of the air inside which is trapped isnide. I am afraid of pushing the syringe harder because i can tear the foil. Do you have any solution for this special case how to clean completely dried up ink from the nozzles? Thank you

[@stuy4119]

So I don't have a steamer. Is there any other way to do the first step like wiping it or something?

[@BCHTechnologies]

You don’t have to use a steamer.

[@darksider93as]

the magenta is not pushing at all. do u know why? it was perfect since 1 week after that it deteriorates quickly to the level that almost no red comes out. it is hard to push water through magenta opening. though itis easy to suck air. i belive there is no nozzles clogs but may be valve problem or so. any help?

[@BCHTechnologies]

If you use pigment ink, the magenta is the easiest one to clog. For dye ink, it shouldn't be a problem. Be careful when you push the cleaning solution through because there is a bladder inside. You don't want to burst the bladder. Use gentle force and a little bit a time.

[@elwaemtrading8488]

Same thing here issue with the Magenta which get Clogged and cannot be cleaned as have inner blocking inside the Valve and it cause me 3 print heads till now and its only with Magenta and its Dye ink not a Pigment ink , If any solution for that issue please let us know

[@thomasjoseph2859]

I will try it. Have nothing to loose. Unless I want to continue to print documents with loss of color.

[@mauricioespinoza6991]

Hi, I have read that it could be very problematic when using an ultrasonic clean. Can you give any other advice (e.g. how much time, any special brand in ultrasonics). Thanks!

[@BCHTechnologies]

Ultrasonic should be used as the last resort for the printhead cleaning. There are reports showing ultrasonic cleaner destroying aluminum foils. We use the ultrasonic cleaning on a regular basis. What is the alternative? Throw the printhead in the trash?

[@Zeanonquaint]

I have seen a video of someone replacing the membrane you call bladder, but he doesn't show the possess of how he does it. Is there a way to tell us how to find this in order to fix a broken one?

[@BCHTechnologies]

I don't know how to fix it because I've never broken one. I will give it a try and see.

[@rebeccahexon1118]

home depot, woohoo!

[@Jerylove247]

I have the HP 7740 the yellow and magenta color do not work. When you injected water, I have to inject in the 4 holes or only in the colors that do not work

[@nemocap2958]

Hi,have you sorted out you issue?My yellow struggle too.

[@Jerylove247]

@@nemocap2958 no 😥

[@sallyfuller9280]

now the printer isnt accepting the cartridges that were in the printer for a month

[@ferozkhanrujballee4781]

replace the chips by new ones, it will be ok

[@andrewskater8813]

These printheads dont like ink getting into the connectors . you get missing cartridge error for the two 4 wire plugs - only one connector is visible without removing some screws. Also you can get dried ink on the reservoir ink sensor springs and connectors so you get depleted cartridge error.

[@rally2444]

I still see lines

[@rjstvhalohalo7706]

cleaning is not advisable replace new printer head for this model after few week same issue

[@Nitramrec]

So you installed a new printer head and the same problem occured after some weeks?

[@guruvaren5216]

I'm not enjoyed