hp deskjet gt 5820 all in one printer printhead cleaning

[@rochellegagarin9847]

I followed this and it totally worked! Don't forget to lock the ink tank after suctioning the ink. Also, you have to use a T10 sized screwdriver to open the printer. Thank you for this vid!

[@ohannajeancortes6700]

Hello! Did you do the next step after suctioning the air? Or leave it as it is?

[@mulmandu1]

Dear master, I fixed my GT5820 by myselft with your help-movie-clip! It was of air inside yellow ink line, I fixed it with 1 syringe. Thank you so much.

[@kunilito]

Огромное вам спасибо за это видео. Благодаря вашему видео я смог починить свой принтер. Всё подробно и понятно. Спасибо вам за работу!

[@m.hanono2804]

GREAT VIDEO!!!! it got my printer alive...Thanks!

[@fatalelieberi]

This video really helps me a lot fixing my printer. The only lacking here is the instruction or explanation why we have to lock the tank ink tube after sucking the ink. Overall, you did a splendid job!

[@romallivykztilot3720]

It's to prevent ink flow and spillage while the printhead is not yet inserted and locked.

[@Samiamtube]

Very useful video. Thanks. It can be viewed in 2x play speed!!

[@isshkswfuu7483]

very descriptive. all other youtuber just cleaned air from pipe and closed.but you said to check head also..thank you

[@okkapurnamasari7848]

Hello sir, your video helps me a lot! Thank you so much.

[@abhiabhi5116]

This is pretty good... Do not skip the cartridge filling and air removal part else it won't work. And this for me was super time consuming... If the ink level in the printhead cartidridge is already low it takes a lot of time to fill.. That's the only big challenge. And another imp thing is to remember to lock the tank (as shown) before taking the printhead cartridge out, and then resetting it to open before using the printer. Before cleaning only magenta was coming. After these steps yellow and black came as well. Unfortunately blue (cyan) didn't deem my efforts sufficient 😅

[@abhiabhi5116]

For me front screws took a different size than back screws. I used T9 and T8

[@tenzinngodup1024]

Your video is helpful

[@fatmabouaziz2967]

I would like to ask you please, if the printer print all the doc. with blue color that's mean that i have to clean the heads like the video?

[@nhatminhchanel8529]

Ok, thanks, i one more a question, how to fix print head error?

[@yixiong9376]

也可通过加压灌墨来排除打印头内部空气。当墨水从打印头渗出时，即排空完成。

[@hamdymehelba7800]

So practical, thank you.

[@DipuDas]

Best Technique. Thank You

[@SLEONNER]

When the printhead is removed and then reinstalled, , the printer indicates head failure, that happened to me, I get the "0" with the symbol! inside. Can you tell me how to reset that?

[@carlosparra8366]

I have same problem, did u find how to reset the error message?

[@coolzero89]

I did it all but same as mine there are still air in those pipes at 16:10 after switching back the ink lock the pipes sucking it back... hope replacing printhead will solve this....

[@edwinbongas]

hi Robert , i have the same problem, did you replace the printhead, is it fix ?

[@janethbonilla2315]

Great your video, it helped me a lot, I have a question: after removing the air from the hoses, it is necessary to refill the cartridges or I can leave them like this. Thank you.

[@tomataso]

El mejor video contemporaneo de musica electronica del verano.

[@sergiodavid3304]

My master! I find my master!

[@sourabhdureja]

After doing above , Mazenta colour has stopped coming and it is printing blue where mazenta is required

[@alexeymarchenko7542]

same for me

[@ENA-s_Vlog_A-Z]

After removing the air from the tubes still my printer blinking warning lights of the print head. What can I do? Please help me.

[@rance12]

My black print head has a gap and the colored is very blurry. My printer had just traveled thru sea cargo for one and a half months, could it be a reason why it happened? Anyway, do I need to put back some ink in the black printhead as well? Coz I think you only did it in tricolor. Thanks.

[@highlands3893]

thank you very much . you are good man

[@buildyourknowledge2651]

How i do cartridge finishing

[@leoescalante8135]

Error E-8 shows after replacing one (1) Printhead (Color or Black) - Fixed! Hello everyone, I will take this opportunity to share with you the solution and fix after having 4 hours of figuring out how to fix this problem (wew!). In my case, after replacing either printheads, "P" or "A" won't show up, and E-8 error keeps on showing. So what I did is to restart the printer by turning it off and on again, then wait for a second an "A" will show in the display and prints the alignment page, then you can proceed to the alignment and priming process! Good luck! Like this so you can help others too. Thank you!

[@meetr4u]

Very useful video.

[@madhumegha]

Hi I am having HP Deskjet GT5810. I am recieving the following error INCOMPATIBLE Cartridges ---TriColor The cartidges listed above are not intended for use in this printer as it is currently configured. I have not changed the ink as of now. What to do

[@khanbasharat]

me too have same problem i get only black n white colour no colour

[@tenzinngodup1024]

Waw very good thanks

[@shahidkhanrana3538]

5820 printer mai colour print nahi aa raha black sahi aa raha hai kya issue hoga

[@crazykoala2289]

It is the worst printer in the world. Thank you for video.

[@youssefsbai3129]

Thankyou.

[@JuanCartas]

Greetings from Mexico, can you do this procedure when the printer says that the color head has to be replaced because it is damaged ?, I hope you can answer me. By the way very good video.

[@HTF]

No

[@76yakito]

Then we have to change the head? please can you answer me, please. Great video.

[@Healthy_Mind_]

Sir, mere printer me air suck krne ke baad cottage se air baps aa jata h

[@mufid0]

Dont up the Blue latch

[@Ahmadnaweed786]

Hello sir, I have a problem with my printer. I hope you can help

[@God.0007]

Bhaiji kal experiment karunga. Merey pass koi tool nahe h. Lakin ager bina tool k or bina open keya mene isey ker leya to me aapko jarur bataunga. Raasta aapney dikha diya, aage dekho kya hota h.

[@jonjon3725]

when im printing colored only yellow collor appear, can u help me? tnx

[@HTF]

you need to clean the printhead. see the video complete. flow step by step

[@afolabioladiran2046]

Jonathan

[@Electronicview]

nice video

[@knjathur5617]

sir all colors did not go to tubes ....what i do???

[@akshaypowar4990]

Hello sir.. Colour print Niklte vakt Yellow color aa raha hai.. Kya karna padega.. aur Printer open krne ke liye konsa screw driver use kiya hai.. naam batay ya link batay.. Thank You..

[@HTF]

you need to clean. flow the step by step my videos.

[@akshaypowar4990]

Okay.. Printer open karne ke liye konsa Screwdriver use kiya hai..

[@HTF]

star T-10

[@akshaypowar4990]

Thank you Sir.. 😊

[@akshaypowar4990]

T 10 se andar ke screw nhi nikl rahe hai.. Uske liye koi aur screwdriver hai kya??

[@meinardgo]

thnk u

[@rupa3691]

after doing as per your video, still I can't get yellow, red and green colors

[@fatmabouaziz2967]

Is it coming all bleu colour?

[@manojvinwal3639]

Syringe ki nozle kha milegi

[@vaquarmomin905]

Sir Page Blank He Aa Raha Hai Pu Process Karne Ke Bad Bhi

[@achridhan]

not showing before and after print

[@aarbihar6954]

SIR PRINT HEAD ME LIGHT NHI AANE PR KYA KARE .PRIT HEAD READING NHI HO RHA HAI

[@mufid0]

Need to Be replace print heads

[@sachindeshmukh1414]

किस वजह से प्रिंट हेड खराब होता है

[@lazylxnar1542]

black and blue line no functioning

[@arupjyotidasadtd3852]

very useful video

[@liveforhumankind2903]

Yeah sab karne ke bad bhi yellow color print nhi de raha hai

[@bablunnp3101]

sir mere printer me black light blinking ho rhi hai iske liye kya kare .

[@HTF]

black ink light blinking?

[@pasa2568]

@@HTF yes

[@Healthy_Mind_]

Kya kru

[@vijaychoudhary4329]

E4 Error show

[@kamilsaqlaini8657]

aapke mu me jaban nahi hai kiya

[@mohammadmujammil5584]

After 16.00 u can clearly see that there is no ink in tubes he is just making fool.

[@theamaansheikh]

See it again carefully there is ink . I have also tried it this works perfectly

[@Healthy_Mind_]

Yellow colour bhi nhi aa rha h

[@HTF]

before removing the injection close lock liver. see the video completely.

[@muhamadagusmuakhir]

Hello sir, your video helps me a lot! Thank you so much.

[@kumaranna9424]

Sirji black print nahi ho rha hai kya kare