Thank you so much for posting this. I'm watching in Aug 2019 and you just saved my 19 year old son from having to buy a new laptop. Also he did the job himself and was so proud that he had been able to fix it by following your step by step instructions. Thank you thank you thank you.
@TimsComputerRepair5 жыл бұрын
Glad he got it working. Those digitizers can be tricky.
@ArthurElizondo8 жыл бұрын
We fixed it in 10 minutes! My son & I called Tim to see about having him fix the laptop. Tim mentioned that some laptops did not retain the "Touch Screen" capability with the new parts. It occurred to me that if we unplug the touch-screen cable then the laptop would work. Yes,,, the cracked screen was still there. But we only had a small section that was cracked. Anyway if you need to access the laptop to get data or just use it, you can disconnect that wire and presto, the laptop works! You can replace the Digitizer Screen at a different time. Thank you so much for helping us Tim. You are an awesome person.
@TimsComputerRepair8 жыл бұрын
+Arthur Elizondo Glad you got it fixed and thanks for the donation.
@bcinsteadof36 жыл бұрын
Finally got around to doing this. It took about 3 hours for me. Great instructions. A couple things that I would add: the screws on the hard drive mount need to be removed before the bottom plate comes off. The rubber on the edge of the bezel is quite easy to tear when heated, I was using a guitar pick and made two small tears in it. Do not touch the LCD after removing the digitizer panel or you'll be spending a while cleaning it. Same thing with the back of the new digitizer panel, leave the plastic film on it until you're actually ready to put it on the computer so it doesn't get dust and fingerprints on it. Aside from those things, the repair was exactly as the video demonstrated, and I was only left with 1 extra screw at the end, so I'd call that a win.
@TimsComputerRepair6 жыл бұрын
Good job. Glad the video helped.
@williambuchman75548 жыл бұрын
Thanks so much for this video! I just successfully replaced the digitizer on my 17" HP Envy laptop. Minor differences from the 15" but nothing I couldn't figure out. I couldn't have done it without your help.
@TimsComputerRepair8 жыл бұрын
Glad the video helped. Thanks for watching.
@Wildminecraftwolf8 жыл бұрын
i have this exact laptop. the screen is broken and the hinge near the power button is stuffed up- this video was absolutlye perfect for me thanks so mutch
@TimsComputerRepair8 жыл бұрын
Thanks for watching.
@ZIOS764 жыл бұрын
THANK YOU MAN , YOUR WORK IS HIGHLY APPREITED.
@steveanthony65709 жыл бұрын
Very nicely done .Good clear instructions as i am going to be doing my nephews digi screenreplacement. Ive done several motherboards etc but ive never tackled a screen replacement never-mind the digitizer screen
@TimsComputerRepair9 жыл бұрын
+Steve W Good luck and let us know how it turns out!
@nataf109 жыл бұрын
Nice job...you just forget to mention the backup battery when you installed the laptop back. Bravo for a very nice explanation
@TimsComputerRepair9 жыл бұрын
+Yehuda Nataf Very good observation.... Yeah I did forget to mention that.
@ward261026 жыл бұрын
Thanks for this video Tim. I watched other videos that indicate you can replace the screen without disassembling the top from the base. However, I could not get to those screws behind the hinges so I followed your video and it worked well. I have the 17" TouchSmart model but the parts are so similar that it worked fine.
@TimsComputerRepair6 жыл бұрын
Hey great! I'm glad the video helped.
@vincente.12076 ай бұрын
Great video. It helps me to know that an HP Envy Touch digitizer glass do exist. I just can not find one for the 17.3 inch screen.
@TimsComputerRepair6 ай бұрын
Thanks for commenting.
@wtbm1239 жыл бұрын
Reminds me of a great big phone screen . Good job Tim
@TimsComputerRepair9 жыл бұрын
wtbm123 Thanks Terry...
@MyGamingThumbs7 жыл бұрын
I am going to use this great video to repair the laptop I have. Mine also had damaged hinge mounts and I fixed them using a great epoxy I found at a local home improvement store.
@TimsComputerRepair7 жыл бұрын
Good luck and thanks for watching.
@tedyurkon77148 жыл бұрын
Just have to say thanks! I would not have tried this without the video. HP service manuals don't even cover this screen, let alone digitizer replacement. I think the digitizer could have been replaced without all the dis-assembly if HP hadn't put those little screws at the base of the bezel---otherwise could have been done with the screen still in place.
@TimsComputerRepair8 жыл бұрын
+Ted Yurkon Correct. You don't need to take the laptop fully apart. There was another issue we where investigating while replacing the digitizer. Thanks for watching.
@kpdthegreat8 жыл бұрын
Thanks Tim. I was able to fix my sons envy 15-u010dx using this video.
@TimsComputerRepair8 жыл бұрын
+kpdthegreat Sounds great. Thanks for watching!
@GodwillDemiGod4 жыл бұрын
Thanks Man. I really needed this. I'm grateful
@peterford9369 Жыл бұрын
Hey Tim, Very, very, informative video. The reason I've been looking into the screen glass or digitizer replacement is, the rubber that protrudes out from the glass on my M7-J020DX, is dry rotting. I'm assuming. It's getting brittle and pieces are flaking off when I touch it opening or closing the laptop. The seal understand seems fine. Very rubbery and clean to the touch. So I took a hobby razor knife and gently cut away the exposed rubber that is flaking. Id hoped the screen could be removed without base removal. Watching other HP models replacement it's possible. But obviously mine is the ones that aren't easy. I guess my question is. Do you think I'm fine with it like this, being the glass and the digitizer is just fine, and the bezel seal seems good where not exposed to air? I was concerned the screen falling out. But it seems that it's actually snapped into the top cover. I don't carry the laptop around very much, it's mostly in place all the time. Anyway you do seem to answer your viewers, so id appreciate your opinion. It's an older computer I know but its working fine so I see no sense in buying anything else or even opening it up if its good to go. Anyway, thank you so much for a very good video and await an opinion. Thanks Tim ✌️
@g8way2k17 жыл бұрын
Well, I don't own a laptop but family does. They seem to look toward me if something goes wrong......boy, are they in trouble..LOL. I just replaced a display on a 17" Envy J-100. And I erroneously thought this would be a similar type project, but far from it. Being a little intimidated I would only try this on a laptop that I would be ready to scrap if it went sour...and how expensive would that be right? Maybe one day I might try it if the conditions and opportunity prevails. Thanks for this video!!
@philsenzig44957 жыл бұрын
I am new to this but this is great instructions. If my LCD screen is cracked as well is that as simple as just removing old and plugging in new 40 pin connector in?
@TimsComputerRepair7 жыл бұрын
It's best to find a complete top assembly if you want guaranteed touch functionality.
@migsycee9 жыл бұрын
Cheers Tim for another Great Video
@TimsComputerRepair9 жыл бұрын
Migsy Cee Cheers Migsy thanks for watching.
@JorgeGomez-bt9lt4 жыл бұрын
a quick question isnt there a non digiitizer option for the 15-b129wm maybe just a replacement bezel .. What I have is a partially cracked screen on mine..
@xyzebruh10835 жыл бұрын
Do you know why the part number or model number is for the actual LCD screen part not the clear glass screen? Trying to repair a friends laptop for him, thanks
@RennyProudlove8 жыл бұрын
First class!
@TimsComputerRepair8 жыл бұрын
Thanks for watching.
@RennyProudlove8 жыл бұрын
A pleasure, keep up the good work!
@domi2027 жыл бұрын
awesome job explaining I wish I had the tools and skills as I just cracked the same 15in envy glass and was quoted over $100 locally id like to have it done as well as my MacBook Air 11 in which is not touch and apple want almost the price a new book witch has a black screen do to a water splash I wonder if it'd be worth shipping from ct. any advice?
@mr.e59883 жыл бұрын
Very helpful Tim. Where can I buy the hinges for the lid? Mine got bent. Thanks in advance.
@TimsComputerRepair3 жыл бұрын
Try eBay or Amazon.
@Britec099 жыл бұрын
8.26 Joe burns himself lol, that is hot air coming out of the wand Joe lol
@TimsComputerRepair9 жыл бұрын
Britec09 I think your right... he did burn himself.
@rodrigorecalde52343 жыл бұрын
this is exactly what I needed, tysm !
@zahidmalik23275 жыл бұрын
Hello, would it be possible for your to advise me where about the lid switch located in HP 15-J laptop? I have purchased HP 15-J054ca, and now facing issues when closing lid. For some reason, my laptop is not going in sleep or hibernate mode. All settings in windows 8 verified fine. Please assist me to resolve this issue.
@SimonZerafa9 жыл бұрын
Just wondering if it would be faster or easier to purchase a new front screen bezel with the digitizer (which I imagine is the expensive part) and then assemble them when they arrive? :-)
@ChaimS8 жыл бұрын
That's exactly what I was thinking!
@maulerrw7 жыл бұрын
heat a metal tray in the oven, remove and WAIT until it is cool enough to be hot but not burn you. place the broken digitiser on it and let it warm up nice and hot. the bezel will come off with little difficulty
@rain13734 жыл бұрын
My HP ENVY x360 - 15t-bp100 CTO digitiizer front glass panel broken into bits. Tell me a way I can fix it myself Looking for a spare, I am from Houston TX.
@nickfiodorov64995 жыл бұрын
Thanks for your vid. If my digitizer is cracked and I don’t mind not using the touch screen. Can I reassemble with the screen only? Also how much would it be to send it for repair
@TimsComputerRepair5 жыл бұрын
Yes you can. You also can just disconnect the digitizer ribbon cable and that will deactivate the touch. Only thing is you will have to live with any cracks in the glass.
@trubyon7 жыл бұрын
Nicely done Tim! Will this same process work for the HP Envy M6-P113DX Touch Screen Digitizer Glass?
@TimsComputerRepair7 жыл бұрын
Not sure but it should. Thanks for watching.
@reneebolden37467 жыл бұрын
you dont have to take the bottom of the laptop off, or remove the hinges. just pry and remove the bezel then the digitizer.
@TimsComputerRepair7 жыл бұрын
Yes I do mention this in the video. Thanks for watching.
@Luis-xb7zp9 жыл бұрын
hello I have a HP sleekbook 4 1115 DX with a glass cracked screen , I have the part to replace but I need the instructional video , do you have it ?...please let me know and thanks.
@herrysetiawijaya55109 жыл бұрын
wowwww, really good tutor, so impressed with your sharing :) thanks , good job
@TimsComputerRepair9 жыл бұрын
+Herry Setia Wijaya Thanks for commenting and thanks for watching.
@saltmangotree624 жыл бұрын
brother i want change hinches both side( hp envy 15 j057cl) where i get in orginal any online site?
@JRMSS47 жыл бұрын
Thanks for responding!
@wldsmke25 жыл бұрын
Do you have a video on replacing the glass on a touch smart 15 f125wm HP?
@Dublekfx8 жыл бұрын
How necessary is the replacement double-sided tape for the bezel, and what size is it? I'm currently doing this repair, and got it fully disassembled before I discovered the need for the tape.
@TimsComputerRepair8 жыл бұрын
There are severa different sizes. From 1mm all the way up to 7mm. I would purchase a 4mm and a 7mm to have at least 2 different sizes around. Very inexpensive tape.
@ananyaray84742 жыл бұрын
Did you forget the cmos battery intentionally to put it back ??
@Mammod1017 жыл бұрын
Hey! Very useful video! I also want to repair the cracked screen glass of my convertible HP ENVY x360-15-W051NW. My question is whether i can use any digitizer for the x360 series or do i have to look especially for one wich is compatible with the exact model number "W051NW" ?
@TimsComputerRepair7 жыл бұрын
I do not know the answer to that question. Thanks for watching.
@Kevin-nw9om10 ай бұрын
What is the part number of that part?
@nidhinm28455 жыл бұрын
Can we change the ENVY TS 15 notebook PC case to folded case...??
@jjlortez8 жыл бұрын
hello I have a HP pavilion 15-n laptop and I have the assembly done but the digitizer Will not snap into the frame
@ramiroalvarengaarrieta82454 жыл бұрын
Hey man, question, can i replace it with another glass digitalizer or it needs to be exagly hp
@LarryPittmanTheBibleTeam7 жыл бұрын
Great video Tim! can you recommend a particular tool set or sets to accomplish this particular task? Thanks!
@TimsComputerRepair7 жыл бұрын
Basic set of precision screw drivers, a metal spudger came in handy, plastic spudger also is handy and some sort of heat gun or hair drier. Thanks for watching.
@LarryPittmanTheBibleTeam7 жыл бұрын
Thank you, Tim!
@lwthowe5 жыл бұрын
On my hp envy 15 inch touchscreen (model 15tj100), I don't know what is broken. Can you tell me? The display simply fades to a white screen occasionally. Sometime I can push or squeeze the bezel along the bottom and it comes back to normal for awhile, but it doesn't stay long before fading back to a white screen. I have clamped it, which helped for awhile but isn't helping any more. Can you tell me which part I need or what to do? Thanks in advance.
@TimsComputerRepair5 жыл бұрын
You need to replace the lcd panel.
@sujanbhatta5097 жыл бұрын
Is this same process use to hp pavilion x360 13 inch laptop
@alejandromarquezdecaceres86727 жыл бұрын
Hi Tim, Great video. Please tell me where can I find the digitizer front glass of a HP ENVY TouchSmart 17-j041nr Thanks a lot!! Marry christmas!
@TimsComputerRepair7 жыл бұрын
I see a selection on ebay. Thanks for watching.
@bcinsteadof37 жыл бұрын
Hi, I've got a HP Envy 15-q493cl (not a touchscreen) with a cracked glass. Any idea where I can get a replacement glass? LCD is fine.
@TimsComputerRepair7 жыл бұрын
Try eBay.
@user-lz5jp3tn4v8 жыл бұрын
Thanks for the explanational want to learn more
@TimsComputerRepair8 жыл бұрын
+ابو حمود المطيري Thanks for Watching!
@johnheller23116 жыл бұрын
Hi, I am fixing the same model, but I believe that there is only an issue with the Video cable. The image goes blank from time to time and can be fixed simply by pushing on the bottom bezel of the screen. I got a new cable off ebay and am going to swap it over. I assume I will have to remove the front glass totally off the screen to get to the cable?
@TimsComputerRepair6 жыл бұрын
You will not have to remove the front glass to replace the cable.
@user-on5ck1uy4l9 жыл бұрын
Hi! I got hp envy 15 notebook pc 15-k050 and i got the same problem - broken glass digitizer. So can you please tell me is this the same digitizer you used and where can i bue it? I just can't find it anywhere.. Thanx
@TimsComputerRepair9 жыл бұрын
+Андрей Прокопович (wheels4littleones) Found mine on ebay.
@wildchild557195 жыл бұрын
Hi Tim good video , what is best place to get digitizer for dell Inspiron 15
@TimsComputerRepair5 жыл бұрын
Perhaps eBay
@JRMSS47 жыл бұрын
Gonna replace the screen on an HP 4-1215DX and wanted to know if can just replace it with a regular non-touch screen?Thank you!
@TimsComputerRepair7 жыл бұрын
Pretty sure you can.
@toolnerd9 жыл бұрын
Thanks for another good video!
@TimsComputerRepair9 жыл бұрын
C Perry As usual thanks for watching.
@anthonybickerstaff87828 жыл бұрын
i live in edmonton i have a HP Envy touch screen. Screen keeps going white can u help me
@anthonybickerstaff87828 жыл бұрын
my email is anthonyjamesb82413@hotmail.com
@djnegromix1007 жыл бұрын
Friend I need your great support I have a hp envy the same model that shows the video where I can buy the spare of the touch screen that model is or that number of excellent part video
@sonyatheoneyouseek50404 жыл бұрын
How long would it take you to fix it if shipped from Michigan?
@TimsComputerRepair4 жыл бұрын
Sorry, I no longer provide digitizer replacement services.
@tiagolopes78027 жыл бұрын
The touchscreen 'module' if i can call this... is USB? or direct to the motherboard in the same wire as screen? What is the brand of screen and touch? Thanks in advanced.
@TimsComputerRepair7 жыл бұрын
Connected to the motherboard.
@DeepState17 жыл бұрын
Nice job
@evanskwame85757 жыл бұрын
hi Tim, got my envy broken, same as the one in the video. sent it for repairs but after fixing the digitizer, the screen was a bit jumpy. so i made them take it off until they can get one that works well. but i have feeling maybe we r not doing something well to keep the one we fixed steady. please advise. thank you
@TimsComputerRepair7 жыл бұрын
I am finding that on certain models HP marries the the digitizer and the screen during assembly with some type of firmware. This means that you may have touch issues after replacing the digitizer on some models. Worse case...Just keep the digitizer unplugged and use without touch.
@evanskwame85757 жыл бұрын
Hi, thanks for your reply, mine is Hp envy 15 touchsmart j078ca. does that model have the issue you are describing? if yes, does it mean i will have to replace both screen and digitizer instead of just digitizer? Thanks
@TimsComputerRepair7 жыл бұрын
I have no way of knowing which models are affected.
@kiutechmetal8 жыл бұрын
thanks excellent tutorial
@TimsComputerRepair8 жыл бұрын
+Esaú Cute Thanks for watching
@dallas699 жыл бұрын
Why all the work Digitizer Front Glass can you just remove the Digitizer Front Glass and use the laptop as a non touch screen?
@tedyurkon77148 жыл бұрын
+Ed Hughes My wife did that for about 3 months until she got frustrated by Windows 10---it was really tough to use without a touch screen.
@cachocrz8 жыл бұрын
Hi Tim. I have a question. I replaced I digitizer for an envy smart touch 15-u010dx from hp. I have a problem with the touch screen. It doesn't recognize the fingers. It has a good picture and works well with the mouse and keyboard, but doesn't do the touch part. What can you tell me?
@TimsComputerRepair8 жыл бұрын
+Cacho Cruz I am finding that on certain models HP marries the the digitizer and the screen during assembly with some type of firmware. This means that you may have touch issues after replacing the digitizer on some models. Worse case...Just keep the digitizer unplugged and use without touch.
@juantorres69557 жыл бұрын
i have a question, my HP ENVY x360 - 15-u363cl is having screen issues where certain colors aren't displayed correctly, what do I need to replace?
@TimsComputerRepair7 жыл бұрын
Sounds like you need to replace the screen however I would recommend replacing the entire screen assembly that includes the screen and digitizer
@PankajKumar0478 жыл бұрын
Hii I want to know...I have HP Envy J-120TX Full HD 1920*1080 Touch Screen display but the touch screen digitizer has been broken...Therefore I would like to know If I buy HP Envy J-15 Series Touch screen digitizer will that work for my laptop model as well irrespective of the resolution factor or does resolution has a role to play in it...I can find several Touch screen digitizers online with the same connectors that are used in my laptop so will they work but nothing has been mentioned about the resolution...so Please suggest...Thanks
@TimsComputerRepair8 жыл бұрын
+Pankaj Kumar I do not have a definitive answer to that question.
@SupraManG7 жыл бұрын
What adhesive tape did you use and what size was it on this particular video?
@TimsComputerRepair7 жыл бұрын
I used 1/4 inch 3M double sided tape
@TheClubPlazma9 жыл бұрын
Good Video THanks
@TimsComputerRepair9 жыл бұрын
+TheClubPlazma Thanks for watching
@babyRhyming4 жыл бұрын
Hey sir can you repair my laptop too ?? love from Pakistan
@kzonetv52759 жыл бұрын
Would the digtizer replacement process apply to the HP Envy 4-1115dx digitizer as well?
@TimsComputerRepair9 жыл бұрын
***** No I believe that is a completely different design.
@kzonetv52759 жыл бұрын
Is there anyway that I could find out how to do that repair?
@TimsComputerRepair9 жыл бұрын
***** Try a KZbin search for HP Envy 4-1115dx digitizer ... not sure from there
@vigneshwar92568 жыл бұрын
I have bought similar model n113dx for which back pannel has been broken can feel me where can i find it for a good price?
@TimsComputerRepair8 жыл бұрын
Try ebay
@vigneshwar92568 жыл бұрын
Yeah but i exactly dont know which pannel is compatible. If u suggest me a goo one it would be great
@vigneshwar92568 жыл бұрын
In price range of 10-15$
@zooni436 жыл бұрын
thank you for sharing the video
@TimsComputerRepair6 жыл бұрын
Your welcome. Thanks for watching.
@JeffreyBenshoff9 жыл бұрын
Awesome Video, as always :)
@TimsComputerRepair9 жыл бұрын
Jeffrey Benshoff Thanks for watching Jeff
@niraj0525 жыл бұрын
Iam from nepal I need hp envy p106 display in my place can I get ?
@Raza_Butt8 жыл бұрын
Mr Kelly;many thanks for this useful information.I have the same problem, for my Hp ENVY M6 Notebook PC, It will be very nice of you to kindly guide me for purchasing the compatible part (touch screen with digitizer).I am located in Pakistan and I am not an IT related guy and unfortunately I am unable to get helped from local suppliers and HP services centers, only option is to proceed on ebay but I need to be sure for the exact part details accordingly.Please help to proceed.Many thankslooking forward for your esteemed cooperation.Raza
@TimsComputerRepair8 жыл бұрын
+Raza Butt I have no idea how to help you with parts in Pakistan
@Raza_Butt8 жыл бұрын
+TimsComputerRepair you can guide me to select the right part as only way to get it is online purchase, is it possible?
@saadamir60246 жыл бұрын
What is the price of the digitzer alone?
@TimsComputerRepair6 жыл бұрын
Meh I've seen them go for $30
@ismoismoyo24466 жыл бұрын
does dead pixel can be repair?
@danny2oh38 жыл бұрын
How much would you charge to fix my digitallizer I don't have a lot of money but tell me the parts how much it would cost please
@TimsComputerRepair8 жыл бұрын
+Danny t I regret to inform you that I no longer offer this repair!
@danny2oh38 жыл бұрын
ok thanks anyway
@johnquebec87388 жыл бұрын
the digitizer is cracked on mine, would the laptop still work if I just remove the digitizer..
@TimsComputerRepair8 жыл бұрын
You laptop would look terrible if you simply remove the digitizer exposing wires and components. You can simply disconnect the digitizer but that requires disassembly and you are still left with a cracked screen.
@SamChaneyProductions9 жыл бұрын
I have the 17 inch ENVY touchsmart and I can access all of the bezel/digitizer attachments with the laptop completely assembled. It seems like if there were no problem with the hinges, you could simply skip the first steps to about 5:30, correct? The only thing holding the digitizer to the top lid is the digitizer cable so wouldn't I be able to just spudge off the digitizer with the rest of the laptop in tact (except for the battery) and then continue on replacing it?
@TimsComputerRepair9 жыл бұрын
+Sam Chaney You are correct. You do not have to completely dis-assemble the laptop.
@SamChaneyProductions9 жыл бұрын
Thanks Tim! I found out for myself but now I'm having the damndest time finding the right touch glass! I even checked the model number under my battery and ordered the glass exactly for that one (17T-K000) but when I received it, it was too large. It seems I have a very rare HP touchsmart that is slightly less than 17 inches.
@TimsComputerRepair9 жыл бұрын
+Sam Chaney Yes these digitizers can be tricky to find. Many ratt holes you can crawl down. You may have to order from China
@EldacarBloodiesth4 жыл бұрын
where do you get that tool? (little hot air gun)
@TimsComputerRepair4 жыл бұрын
amzn.to/2RY0U1z
@kdevrees7 жыл бұрын
Do you know where I can get a digitizer screen for an HP 15-ae076ca ? Thanks.
@TimsComputerRepair7 жыл бұрын
Try Amazon or eBay
@skitt1238 жыл бұрын
Welp, I held the heat gun too close and melted the bezel. Do you know where I can find a replacement that I can attach the glass to? I ordered one off of eBay but although it was stated it's for an Envy M6, it didn't fit the glass, nor did it match the one I'm replacing.
@TimsComputerRepair8 жыл бұрын
+Scott Sanford I hate when that happens! When shopping for the bezel be sure to match the exact part number up. There should be a sticker on the inside of the bezel with a part number. You may have a difficult time finding a match as these HP Envy's have been a elusive bunch.
@skitt1238 жыл бұрын
I'm not sure which number to use. This was the sticker on the bezel: www,imgur.com/hTH9iuQ Can you help me figure it out? Thanks!
@TimsComputerRepair8 жыл бұрын
+Scott Sanford go with the hp Envy M6 bezel 6070B0660902. I am seeing that already on ebay
@MrKhalidinoo9 жыл бұрын
Hi Tim, I have a question, can I install that digitizer on my HP Envy 15-j181nr laptop? which is originally is not a touchable laptop. Is there any chance to work?
@TimsComputerRepair9 жыл бұрын
+MrKhalidinoo Can't say for sure. It's important to match up the exact model of the laptop with the vendor you are ordering the digitizer from. Many traps you can fall into with these digitizers.
@MrKhalidinoo9 жыл бұрын
+TimsComputerRepair Thanks Tim
@maulerrw7 жыл бұрын
Thanks, you helped me remove and repair one. however you DO NOT have to tear down the entire laptop. Simply removing the two outside corner screen screws near the hinges and start as if the screen is already off the laptop. This is what I did. Seriously you do not need to take the whole screen off to anyone watching. you're only giving yourself more work
@TimsComputerRepair7 жыл бұрын
Thanks for the comment. In this particular repair there was another issue that needed to be investigated requiring a full disassemble that was not talked about in the video.. Thanks for watching.
@MrDeepzek8 жыл бұрын
20:00 where is that BIOS battery? :D:D good vid thatnks
@TimsComputerRepair8 жыл бұрын
It's there..Just under the plastics. Thanks for watching.
@NELSHHON7 жыл бұрын
Where can I buy that digitizer?
@TimsComputerRepair7 жыл бұрын
Try ebay
@5150Electronics7 жыл бұрын
Have you done a 15-u?
@TimsComputerRepair7 жыл бұрын
I have...
@5150Electronics7 жыл бұрын
Could the control chip on the monitor go bad, I have one that had one crack, but the touch was not working anymore at all, you touched one area and it might register somewhere else or not at all, after I replaced the digitizer it looked great but the touch was working exactly the same way
@TimsComputerRepair7 жыл бұрын
Hard to say. It is always best to replace the entire top lid with screen and digitzer to guarantee proper touch functionality.
@kattproductionz12476 жыл бұрын
Why all the work??
@ABIXWEEZY4 жыл бұрын
Mines is literally the same problem 😅 and lol that how I got it for free
@SThrillz7 жыл бұрын
watching this to repair mine but doesn't seem that you need to open the entire laptop, I might be wrong.
@TimsComputerRepair7 жыл бұрын
There was another issue with this laptop that needed to be investigated that required the entire laptop to be taken apart. This was not mentioned in the video. So no you do not have to take the entire laptop apart.