HP Omen 15 Gaming Laptop LCD Screen Replacement

[@peekjhon750]

Thank you, thanks to your video I just saved 200 dollars. Your explanation is excellent! Lot's of blessings for you.

[@UbergeeksBiz]

You are welcome. I'm glad it helped.

[@AfroSam1010]

Great video. Easy to follow I just did it myself in under 30 mins

[@UbergeeksBiz]

Glad it helped

[@nonewmsgs]

Thank you very much! I saw someone else's video who didn't go into the detail you did for lessening/removal of bezel so I needed this

[@UbergeeksBiz]

Glad my video helped.

[@UbergeeksBiz]

Glad my video helped.

[@leffebond7210]

Very very good video. Repairing it with the computer expert would not have been an option $ 400. Many thanks! / L Bond

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@bradbell6032]

Great video. My same laptop display is flickering when you tilt the screen angle. I think it's the display cable, is that hard to replace after removing the screen as in this video? Thanks!

[@UbergeeksBiz]

I would think is the LCD. Not the cable. But you can give that a try.

[@DSMTUNER]

@@UbergeeksBiz just replaced screen following this video. All fixed no more problems! Thanks again for the great tutorial.

[@UbergeeksBiz]

@@DSMTUNER Awesome. I'm glad the video helped.

[@lucasb8202]

Hi thanks you very much is the screen the same as Hp OMEN 15-DC0002 15 ? Thank’ss

[@nourgharbi8606]

Thx for the very helpful video. I have a small problem though, when I open my laptop from a closed position I always hear a snap and I have a little resistance. Is it normal? I checked and it’s all glued perfectly. I don’t understand. Thank you for your answer.

[@UbergeeksBiz]

sounds like the hinge plastic broke off. making that sound when you close

[@meh8704]

While taking the screen out I can't seem to find the model number. It's the same model as shown in the video and it's never had the screen replaced, so I'm just confused on why I don't have the model number as I don't want to accidentally get the wrong part.

[@tomskelf]

Thank you very much for this video.

[@Hi-wm4bw]

Is the screen good for 15-dc1057

[@dhyeyrajsinhparmar5673]

How to clean stains which are inside the screen?

[@akumaz78]

I know The video is long time ago, wandering is there an upgrade version or better type of LCD fir this model sir?

[@UbergeeksBiz]

No. Best is to use the same model screen

[@akumaz78]

@@UbergeeksBiz thank you 🙏🏻

[@80sbaybii]

Can I upgrade to touch screen? Will it need some kinda program to work

[@malsiaosi8756]

Thank you for this. I have the newer model but im sure it will be the same or simolar to this. Thank you very much!

[@UbergeeksBiz]

Glad it helped

[@duediligence791]

My screen is stuck. Seems like it may have double sided tape. Any thoughts?

[@UbergeeksBiz]

Yes, you need to pull the tape off

[@niftynews1977]

With this replacement screen work for Omen 15-ce0xx? They seem similar.

[@darubramasto]

Thank for your video appreciate it

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@copicopi8877]

is that the 15 ce054nz model?

[@UbergeeksBiz]

nope

[@IvaanCroatia]

Is the 17 same process? They're asking me 400 dollars to replace the screen and I'd prefer to just do it myself. With 17 screen of course.

[@UbergeeksBiz]

Yes. Same process

[@saifrhyman6048]

Should the battery be disconnected first?

[@UbergeeksBiz]

It's recommended. But I did it without. Should be fine.

[@rishabhchauhan457]

How many pins screen is of omen 15 en0002ax

[@mute6243]

Will the screens linked in the description work for a model, 15ce019dx?

[@UbergeeksBiz]

I'm not 100% sure. Unless you tell me your screen serial number

[@niftynews1977]

Will this replacement screen work for Omen 15-ce0xx? They seem similar.

[@UbergeeksBiz]

Yes

[@niftynews1977]

@@UbergeeksBiz Thanks

[@DavidNitzscheBell]

there are different models of the hp Omen 15 inch..... mine has 6 screws and the screen doesn't just fall out...... it's still held in place by something. still looking....

[@UbergeeksBiz]

Try check the double sided tape on the screen

[@MrGaleor]

Having that metal edge on an lcd screen is just making me anxious

[@edwardchen3229]

Be advised: remember to first disconnect the PC power AND BATTERY before you uninstall/reinstall the monitor, as the 16V power supplied to the screen might damage your graphics card core and therefore destroy your laptop completely.

[@UbergeeksBiz]

Thanks for the comment.