HP Tuners and the 6L80 - What does it actually change? Part one - intro and what you need to know!

[@jwalker8093]

This series on the GM 6 speed autos is the best thing to happen to KZbin in years!

[@rguillen2014]

junk trans ever 😂

[@brettstoner8283]

Thank you for making these videos. They are extremely informative and you are a great teacher!

[@PHLTHS]

Thank for this video. One of the best going around showing what happens in the real world.

[@Akya2120]

Please please please go over the 10R80/10L80 next. I'm trying to use one in a swap and you're probably the best source of information I've found on all this. This is absolute GOLD! I appreciate the heck out of all the work that went into this!

[@siuautomotive]

I have some Ford 10-speeds and I have three 3l diesel trucks with the 10speed. I don’t think hp talks with it, but maybe things have changed. I look into it.

[@Akya2120]

@@siuautomotive I kinda doubt I'm that lucky 🤣. There's a company called US Shift who makes a 6R80 and is trying to make a 10R80 controller. From what I can tell they're not shifting the thing properly. It looks like their shifts take about 600 milliseconds from initial command. Way to short for them to have the pressure ramping that's used in the factory setup.

[@tptrsn]

INCREDIBLE stuff you've done here!!

[@PHLTHS]

FYI, in some versions of HPT and depending on the TCM OS, you can log PCA Pressure for the TCC Desired Table. EFI Live also has a channel for the TCC Slip Error RPM to work out where you are in the TCC Apply Ramp Table.

[@shamelcar]

I love your tutorial. Please keep going❤

[@ohfugit]

Awesome! Thank you!

[@johncollinsgrove1750]

Definitely going to have to watch all of the series but currently need to get trans rebuilt or get a remain. Slipping bad 1st and 2nd. But have read that I need to reprogram the module if I replace it. Can I do that with hp tuners. Would guess I would need to download current file and write it to new module but want to make sure before I find out I can't. Thanks for the help.

[@charlesweber4925]

BEEEAUTIFUL VIDEO!

[@azreeal1]

Where can I purchase the gm technician manual for the 6l80? I can't seem to find it anywhere. Helm doesn't list it.

[@hermanjones4124]

I HAVE A 2014 6L90 THAT I JUST REBUILD AND NOW IT DRIVES AND CHANGES GEARS GOOD BUT AFTER A WHILE OF DRIVING WHEN I STOP IT WILL STOP PULLING IN FORWARD AND REVERSE WHEN I TURN THE VAN OFF AND BACK ON IT DRIVES CORRECTLY UNTIL I STOP PLEASE HELP

[@NickDoddTV]

Awesome.

[@ohfugit]

@siuautomotive Between the changing of variables, after you do the reset in vcm scanner, how did you know the relearn adjustment procedure completed? TY

[@siuautomotive]

We monitored the shift times and once they were repeating, we figured it had adapted. Before we started each day, we warmed the trans up to 190 degrees to ensure it would adapt.

[@crischalmers1277]

Well I have personally changed the PCS in my tehcm myself in a 6t40 2015 malibu 2.5l. You absolutely can if you snatch one from the junk yard or whatever