HRG Offroad Honda OEM strut length comparison

[@DashnCars]

literally the greatest video to lifted Honda folks. Thank you Ben!

[@hrg_tv]

Thanks! I'm going to do an actual comparison installed on all of these in the near future.

[@DashnCars]

Honda Rescue Garage That'd be sick. It'll help having a video to reference people when they have questions.

[@nateherner6872]

Great info man!

[@hrg_tv]

thanks!

[@goneglord420]

Dude you took you time on this and thats awesome!

[@TacticalBunnyCA]

Thanks for this video! I have a 95 Integra RS stripped down streetcar JDM GS-R motor and lsd trans. I even already happen to have the ball style Type R rear control arm WOOT! The goal is to fit Falcon Wildpeaks 215-65 r16 (27.2” dia). Thanks to you I think I’ll be able to pull it off with the with CRV all the way around.

[@timbrebjornson]

Sadly I am trying to go in the opposite direction. Trying to find the shortest OEM strut setup possible. Running a DC integra and need it a bit lower without aftermarket. But really great video.

[@jakemir]

Great video! I have a 1995 Honda Del Sol. Can I use take offs from a newer Honda for the front and rear? I am looking for an OEM ride, but the OEM are no longer available for the Del sol. Thank you

[@loosh__sii]

this actually helped me alot i want to go 14 inch steel wheels on a 88-91 sedan but dont want to lower it either i want a taller sitting car ,maybe just change the 88-91 shocks instead for a different year

[@thejustmechannel3298]

❤❤ so so dope❤❤ Thanks so much I can maybe find a junkyard safe daily way to lift my little wagon for cheap. As always Love, peace, an axle grease

[@ЖеняПешиходов]

Мужик красавчик, спасибо, полезная информация.

[@bseries8826]

Thanks for sharing

[@shawn396hoss]

THANK YOU!!!!!

[@Usualsuspect92]

Do you happen to know the lengths of the crv struts?

[@johnnyherron5361]

I have a 99 crv .. with coilovers.. but that are shot .. I like a little stance look ... is there a factory strut that's shorter than the first gen crv strut .from another Honda? just not trying to spend 500+ on suspension again

[@Happydazeautoco]

When using the 96 to 98 civic rear struts. What part do you grind down the strut bracket or the control arm ? Please get back to me as soon as possible. Thank you

[@RonnieGonzales520]

I didnt see the 90-93 accord fronts for comparison which seems to be the most common when you search lifting a wagon..whats the difference between 94-97 accord vs 90-93 accord?

[@BlackMagicRacing]

Do you know if the 89-90 Legend rear would bolt up to a 97 civic DX hatchback?

[@pnw_element9822]

Which bilstein shocks and struts can I used on my 2006 Honda Element some help would be nice or send a link please thanks

[@andrewkelley3105]

So this is an oddball request as I'm about to lift my 1st gen Odyssey. The CRV rear strut/coil works because a few guys have run them BUT to drop their Ody so I'm wondering if a stock CRV rear strut will raise the rear of my Odyssey?

[@zachsummers3321]

Can u do a 1994 to 97 accord rear struts too?

[@bseries8826]

Koo little comparison

[@hrg_tv]

thanks!

[@bryancrane1898]

Is there a rear drum to disc swap for the rt4wd?

[@monster500s]

I have 97 Honda civic 4door lx I want to lift it. Of I get them struts will the stock axle work?

[@jaimearturoquinonez6100]

🤘🏽🤘🏽🤘🏽

[@junkyardginger290]

So i have a 94 integra crv struts on the front. from your video says 2.5inches longer giving 5-6inches of lift. i have stock integra struts in rear. without doing a subframe drop. should i buy the 1.5inch or 2inch spacers? i want to level it out the best i can. or should i remove crv struts and just do 1.5in all the way around???

[@Im_arturo]

Any info on front fork to give a little more lift?

[@hrg_tv]

The ones I tested are all within 1/8" of being exactly the same length. I did not get Legend front struts or forks, but will check next time I go to the junk yard, just to see if they are different.

[@rezridez1]

Looking at lifting 2004 civic dx sedan. From what iv read i can use crv front struts to lift the front but the rear i need type r lower to be able to use the crv rear is that correct?

[@Chubsky]

Are EF Sedan struts the same length as wagon struts?

[@hrg_tv]

struts are the same overall length but the springs are much longer. The spring perch is mounted lower on the strut. I am guessing it is done that way for additional travel

[@boostedbudgetbuilds2485]

Would any of this work to lift a eg?

[@hrg_tv]

Yes, you can use Accord and CRV parts to lift it but keep in mind anything beyond 2" will result in axle binding and geometry issues. HRG Engineering makes a kit that solves these problems, letting you lift up to 3" see link in description www.hondarescue.com

[@christiannorwik]

How about 92-95 civic?

[@hrg_tv]

At the time of the video I could not get my hands on a set. I plan on redoing this whole video, next time I'll actually measure spring rates