Lift kit results explained for 1997-01 Honda CR-V.

[@rdgs]

In my RD1 I have "Old Man Emu" lift springs - it is lifted more than an inch + doesn't require longer shocks ;-)

[@bryanedwards7607]

When I first got mine lifted (Element) I thought my lift, bigger tires, and A1 Auto quick struts were to blame for my ride. After replacing all of my worn out bushings, the ride is NIGHT and DAY better!!!

[@robertgonzalez1434]

Where could I find the Gabriel quick struts ?

[@twentertainment8409]

Tyres are wide big and how does CV axle fit? Did you modify

[@tylerholbrook8634]

Would you recommend getting a strut bar? Would that help the in road turning while still allowing for more travel?

[@darbymcbride41]

Are those stretched out oem steelies? I really like that reminds me of the stretched out rt4wd wagon rims I've seen. Please lmk I really like that oem look and would like tire size and rim size offset. Thanks

[@jamesmeeks8949]

What brand tire is that ? I like that look on the factory rim.

[@SanProsan1993]

The rims they got are steelies from Jeep Cherokee XJ, not stock Honda steelies. That helps with the look dramatically.

[@jamesmeeks8949]

@@SanProsan1993 I thought that was factory rim, lol.

[@ГеоргиСтефанов-х1ъ]

Do these rims need spacers? And if so, how many millimeters?

[@jomariangelotenebro8323]

Are those the stock wheels?

[@Brandi548]

are the 4" lift kit are only used for off road only? i just read it on the website

[@customcrusherhd7294]

I ended up going with fcs struts front and rear on the 4in ultimate. Got around 5in but the rear settled about an inch. Think I'm gonna install your 1in spacer on top to level it all back out and give me a bit more lift in the rear than front.

[@SanProsan1993]

1.5" In the rear levels it out well. With 1" rear still looks a bit lower than front.

[@Brandi548]

are those rear and front stock upper control arms?

[@yeahman1756]

what kind of rims are those?

[@GaryWold]

I'm thinking about the 2" or 3" kit. Has anyone tried either with the Bilstein B6 Performance Shocks (Front = 24-023382 or Rear = 24-023399 ) Paired OME 1.25" Lift Coil Springs (Front = 0# mpn2191435, and Rear = # mpn2191436 ) Also, Going with a Three-inch lift, is the adjustable Camber usually an issue?

[@loloalex8848]

Thank you for the great videos

[@alexcooper-dambrosio6532]

I have 15 jeep patriot4x4 can you build me a kit

[@ZachariasKit-s2c]

Welch Gateway

[@HadenatorTrainz]

Nice shirt

[@blackcloud7717]

Grabriels are good.

[@CareyCharles-e7d]

Lorena Valley

[@Couture.m]

Let's invent lockable sway bars

[@ohhailkingbobby1073]

I have the basic 1 inch spacer in the front and 2inch spacer lift in the rear I have my front passenger axle vibration, I've replaced the axle with napa, I also notice I'm missing a torque mount from the transmission Will this cause the vibration from a stop to acceleration?

[@ChantalHikes-c7p]

Winnifred Hills

[@AledkBerkeley-z4m]

Willard Overpass

[@RonaldSmith-b4r]

Santiago Common

[@WoolfStephanie-f3u]

Wisoky Knolls

[@HeatherWarren-d3s]

Lucie Vista

[@WilliamCondon-s1y]

Celestino Field

[@ThomasBurris-f1s]

Zachery Hollow

[@LockeMelissa-f4n]

Arch Ville

[@ThodoreYale-w2y]

Turcotte Station

[@DeniseReyes-z3w]

Witting Fall

[@brucelowe42088]

Love the rexi

[@BoothHugo-k4p]

Klocko Hills

[@BennettIra-k6z]

Mabel Overpass

[@MichaelKeaney-f2p]

Zena Islands

[@JoshuaFrasch-j2o]

Volkman Cape

[@DavidMetcalfe-x1i]

Connor Island

[@KeatsMarlon-o1f]

Kuphal Summit

[@MorganWinston-z9k]

Stephen Pines

[@OdaSmyre-h4b]

Nayeli Manor

[@ArchibaldMurphy-s8j]

Zieme Fall

[@DunlopBuck-i3o]

Lynch Points

[@ThersaGobern-n2x]

Gaylord Field

[@manuelcarra35]

What weels are they ??