Hubsan H501S Compass Calibration 1 & 2 (Also H501SS H501A )

[@Fiya_gamez]

Straight to the point, no annoying music..I LOVE it. Im old school as well.and i had problems with mine..got it back together, found your channel and has been AWESOME!! THANKS MAN!

[@FlashForwardRC]

Glad to hear my content helped brother!

[@RobertKelly-it8wm]

I getting the antenna kit off Aliexpress, i thought they went in the other way around,? and calibration, i thought always😊 clockwise?

[@СаняРадко]

Здравствуйте. Скажите пожалуйста, запускаю квадрокоптер примерно высота 20-30 метров и коптер совсем почти не реагирует на стики. То есть с большой задержкой выполняет команды. А в видео показывают что и на километр улетают и коптер слушается. Что можно сделать? И по видео записи! Включаю кнопку видео - запись пошла. Опять нажимаю, но запись не останавливается. И удерживать пробовал кнопку. Серавно время записи идёт. При просмотре на ноутбуке - пишет ошибка не возможно просмотреть!

[@FlashForwardRC]

Проблема с задержкой ответа может заключаться в нескольких вещах. Во-первых, вы находитесь в застроенном районе с большим количеством сигналов Wi-Fi, где могут быть помехи. Попробуйте другой менее загруженный район. Если это произойдет, где бы вы ни летали, вы можете заглянуть в антенны на контроллере. У продвинутой версии контроллера есть известная проблема с соединениями пигтейлов. Замена их на новые иногда может решить эту проблему. Проблема с видео может быть связана с прошивкой или неисправной видеокартой. Попробуйте обновить прошивку дрона до последней версии, чтобы сначала посмотреть, поможет ли это. У меня нет прошивки для вас, чтобы попробовать, но ее можно скачать из групп Facebook для этого дрона. Удачи!

[@СаняРадко]

@@FlashForwardRC попробую. Спасибо. С прошивкой это для меня тёмный лес! Запускал не где-то в поле, а внутри школьного двора!

[@CraigBMM]

the cats like "oh another drone video .. pfff "

[@robertramsey5027]

Good video....correct way to calibrate!

[@FlashForwardRC]

Thanks Robert for the kind words! Simple and to the point has always been my method.

[@Northstar-Media]

Just got H-501S do you have to do compass bind every turn on ? You have to with mine yet some people tell me they don't .It fly's great GPS ,RTH ,Orbit all work fine ,Altitude mode is pretty tricky & makes quad faster but also harder to fly ...

[@RubenTainoAI]

Mine never ask for calibration, but as I fly it in places where theres other signals, like wifi, radio, phone, and cable companies antennas, I feel better if I do a manual calibration. Just in case those signals could affect the gps connection. To do it manually, just hold the left joystick down while move up and down the gps button from 25 to 35 times, smoothly, you don't want to break it. Then it will ask you to calibrate compass 1 and 2.

[@davemarshall4725]

The sticker on my quad says h501s-s the controller has a sticker h501s-s so should I upgrade firmware

[@FlashForwardRC]

If your drone is flying well I suggest leaving it as is and enjoy.

[@TxAllen972]

The manual is confusing.... In the text it says do Compass Calibration 2 (the vertical one) by turning it clockwise, but in the diagram below it, it says counter-clockwise. So I assume from your video counter-clockwise is correct?? (I am looking a manual version 1.2 En)

[@FlashForwardRC]

Allen either direction will produce the same result.

[@jonasneroni2186]

My hubsan does not go Into calibrate Compass one i have to activate it manuellyfrom the transmitter

[@FlashForwardRC]

Yes, they recently began putting no calibration compasses in this drone. You only need to calibrate when it asks now!

[@mordechaijonez3812]

The newest firmware does not require constant calibrations. Pg 16 of the manual shows you the manual compass calibration method if you change locations etc.

[@JustWatching0323]

@@mordechaijonez3812 I bought this drone just the other day. In the online manual there is nothing about manual compass calibration on page 16. How do I activate it manually?

[@davemarshall4725]

What if it doesn’t go into calibrate compass one

[@FlashForwardRC]

Hi Dave Hubsan put out drones with a compass that does not require calibration at start up. If you would like to force calibrate the compass please refer to this newer video. I hope this helps, thanks for watching! kzbin.info/www/bejne/bHzJZGChdtmApdE

[@davemarshall4725]

@@FlashForwardRC so it will take video after I do this

[@FlashForwardRC]

@@davemarshall4725 compass calibration is unrelated to the ability to record video. If you are not able to record video or can't see an image on the screen you have an issue that the calibration will not resolve unfortunately.

[@davemarshall4725]

@@FlashForwardRC so do you have any suggestions

[@davemarshall4725]

I’m at work right now so not with my quad

[@Wu-Forever]

I was told not to keep picking up and putting it down during compass 1 calibration

[@FlashForwardRC]

Correct try to keep it moving in the indicated directions during calibration.

[@tripbyte]

why the black bar?

[@FlashForwardRC]

WichNeND to hide my location. :)

[@tigeros78]

Why Left? The instruction in compass 2 says clokwise to the right?

[@Zdzifko]

Good question... why left?

[@FlashForwardRC]

No reason I go left other than Hubsan suggests it.

[@resurrectionx5952]

It keeps repeating calib one after calib 2 finished

[@FlashForwardRC]

Be sure to calibrate and lay it down immediately for take off after calibration 2 otherwise it will invoke calibration again.

[@resurrectionx5952]

@@FlashForwardRC I thought about that but it want calib one even before I have a chance to put it down. No big deal I fly it without compass and seems it doesn't have effect on RTH. Only the leds doing funky stuff 😂👍