Wow!!!!! this guy is awesome no fluff, no Bullshit, did not ramble with a bunch of useless information, just good common sense approach to help the DYI person accomplish a simple task at home.
@Hunterworks Жыл бұрын
Thank you, pretty much the way we run our business, focus on only what you need, not what we need to sell you
@MrBigokhunter2 ай бұрын
@robinsmith3155 Did you pull your clutch, any other notes? I have 2016 Ranger 900 crew and the clutch started slipping, about to start ordering parts and puller.. Just wondering is there anything else to know.. Great Video BTW @Hunerworks....
@toddantill87213 жыл бұрын
I’m right there with ya man on the impacts, mater of fact, I have the same impacts 1/2 & 3/8 drive, it’s knowing how to use the trigger.
@rhouser12802 жыл бұрын
I just had some experience with what you said about putting a handle through the primary and loosening your spidernut, only I didn't realize I loosened it. Do mostly trail/mountain riding so I guess that's why I didn't notice a loss in top speed or really anything until my daughter was stuck down the road because it wouldn't move. When I got it home and took the cover off, I realized everything had come loose. The spider nut wasn't even threaded on at all. I couldn't figure out why it came loose but the only time I had the primary off, which wasn't long ago, I used a wooden handle through the middle so I could get 96ft/lbs. I'm pretty good at finding out what not to do lol
@Hunterworks2 жыл бұрын
I resemble that last sentence myself!!
@mikemartin35334 жыл бұрын
JUST TO BE CLEAR The EPI is a great tool no complaints just wanted something that said HW Love the work that you do thank you
@Viggen-vert5 ай бұрын
Thank you very much for this tutorial. My primary was not releasing fully on my Ranger 570 and I was getting creep and difficult shifting. In the end, I needed to replace the primary and I used your technique. It solved the problem thank you very much.
@Hunterworks5 ай бұрын
No problem!!
@rcrawler89544 ай бұрын
Thanks for the video! And I also like the no bs talk. Great job!
@Hunterworks4 ай бұрын
Thank you!!
@psdesignssmith78674 жыл бұрын
Seems like a solid walk through. I dont see anything here that I dont do personally. Great video!
@nigelmielke47062 жыл бұрын
Good video, I had trouble with a 2019 ranger crew xp1000 primary wouldn't come off for anything ended up pumping grease in the crankshaft hole, popped it out!! I agree with not putting anything through the the clutch that's a big no no. Ps Thanks for the line up tool, it worked great!!
@Hunterworks2 жыл бұрын
Good deal and thanks
@bobedwards3883 жыл бұрын
Thanks for this video. Made taking my granddaughters clutch off her 800 rzr easy. Bearing was froze up completely. Just Purchased new primary instead if rebuilding. back on the road again.
@Hunterworks3 жыл бұрын
Good Deal
@brodyschoettlin34088 ай бұрын
Where did you buy one at?
@budgetcardcollector69883 жыл бұрын
Huge help. Had to tap mine to break it loose. Dealer wanted $2000 to replace clutches and belt. I replaced primary and belt for $200. Runs like a champ.
@Hunterworks3 жыл бұрын
Where did you get a primary and belt for $200?
@budgetcardcollector69883 жыл бұрын
@@Hunterworks Amazon. Look at Top Notch Parts. Primary was $134
@Hunterworks3 жыл бұрын
@@budgetcardcollector6988 you need to watch our video on not buying these chinese clutches, you might get lucky but most are just doing it again very soon
@budgetcardcollector69883 жыл бұрын
@@Hunterworks completely understand the risk, but the item had good reviews and I thought was worth a shot. If it fails, I'm only $134 out
@Hunterworks3 жыл бұрын
@@budgetcardcollector6988 and a belt and possibility of coming apart, taking secondary out too. I see this stuff every single day.
@hippie7845 жыл бұрын
Thanks that was a great help you explained it very well
@johnnywilliams783885 жыл бұрын
Well hell man you helped the hell out of me I took the cover off and didn't know what the hell I was looking at thanks a lot hopefully my project will work I'm attempting to swap the Polaris engine with a duramax 18 hp praying the clutch fits the shaft
@johnnyherring48254 жыл бұрын
How did it go would love to see video of that
@aldimore5 жыл бұрын
Thank you for these videos. New to these beasts. Just got a Turbo S. Hope the stock belt last a long time but will order one from you as thanks for these great videos.
@Hunterworks5 жыл бұрын
Thanks for comment and hope the order!!!
@dirtyboyzoff-road78264 жыл бұрын
Hunterworks Inc. I got a 17 general I tried making a homemade puller now I got a piece of metal stuck in the back of the primary becuz I can’t get it off ! Any ideas? Needing help BAD!
@5StarRestorations3 жыл бұрын
great job. doing a 570 rzr today... using your method
@JAnBG57472 жыл бұрын
Thank you! Very simple and precise
@davidyoung82303 жыл бұрын
You make it look so easy lol. Very informative video
@newera4k3332 жыл бұрын
2021 Polaris ranger xp 1000 North Star. The bolt that held on my primary was a T-60.
@kodasgotgame Жыл бұрын
Fill me in on the secret of getting a broken bolt out of the shaft that is deep inside about an inch. I have a general 1000 with this issue (happened on the trail). I've tried to drill the center and use an easy out but it rounds off the easy out.
@Hunterworks Жыл бұрын
Different style of easy out most likely, the ones I use do not slip. Go to amazon and put this in the search RIDGID 35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor
@rogerrings97382 жыл бұрын
Thanks for in depth method! So easy!! Have broken bolt on primary!! How to proceed w new installation and should I replace all four now? Thanks in advance
@Hunterworks2 жыл бұрын
I don't have a method for that, never broke a cover bolt, sometimes you have to buy a new one
@jasonavitable7024 Жыл бұрын
Thank you that was super helpful
@richardgarza128516 күн бұрын
Thanks a lot you're a good help yes thank you❤
@ColdTecate110 ай бұрын
Geat video any idea why my 2017 rzr stalls when put in gear? Has to be rocked to release.
@Hunterworks10 ай бұрын
Send me an email todd@hunterworks.com and ask me that
@willlittle923011 ай бұрын
100% great job
@motoonthis1514 Жыл бұрын
I have a 2015 Polaris assault switchback 800. Is there a universal puller you have or a specific one for my sled? My primary won’t engage, I ref my sled and it won’t move. What do you think the culprit is?
@takemdeep Жыл бұрын
You mentioned the new style bolt for that clutch, do they fit all the XP 1000's? And where can the bolt be purchased?
@Hunterworks Жыл бұрын
Yes and Polaris. The new is not so new anymore
@jehovaserrato6159 ай бұрын
Do you have a video on removing a broken bolt on the primary clutch? 2015 RZR 1000
@Hunterworks9 ай бұрын
Sorry no. Never had it happen here.
@peterlogan16232 жыл бұрын
The best way to remove it is using hydraulic action, fill the hole with grease first then put in the extractor bolt, it works without hitting the end with a hammer.
@Hunterworks2 жыл бұрын
Then you got all that grease over everything, a puller works just find 99% of the time. Odd one is to use bread in the hole, google that
@curtleake2191 Жыл бұрын
Thanks, that worked perfect, grease in the hole!
@thehilltopworkshop10 ай бұрын
@@curtleake2191We still talking about clutches here?
@jackal2045 Жыл бұрын
Thank you
@kerryjones12573 жыл бұрын
Ok 3rd trip to the store for the best impact driver they have. Just to double check I’m supposed to go forward once the clutch bolt is fully treaded correct? Logically it had too but just double checking...
@Hunterworks3 жыл бұрын
Clutch bolt or puller?
@mattsmith8345Ай бұрын
Hey Todd, any other ideas for how to get a primary off with your tool? Ours is pretty hard core on there……
@HunterworksАй бұрын
put under load with the puller, then smack with a hammer hard on the end of the puller, then if that does not work, then google the bread trcik for pulling clutches
@mattsmith8345Ай бұрын
@@Hunterworks the hammer trick didn’t work but I was able to pump grease into the shaft, then wind in the tool…sort of a hydraulic aid, then just before the tool bottoms out it pops off. And I mean POP!!!
@HunterworksАй бұрын
@@mattsmith8345 That is what the bread does without all the grease you MUST get completely out. Wrong bread maybe LOL
@lupemendoza40462 жыл бұрын
Tanks for the video
@MrCeezz7 ай бұрын
great advice!
@jimmyyoung3957 Жыл бұрын
I have a 570 ranger ,started dragging and wont stop pulling, belts riding just a little high on second dary looks like would be right could this be in primary
@Hunterworks Жыл бұрын
It is in the primary, send me an email todd@hunterworks.com and I will help you with it
@kevinwinchester5155 жыл бұрын
I use the impact as well. Good job on the videos
@dennyryan60782 жыл бұрын
I have a Kubota XG 850 how do you remove the primary clutch?
@FullDrawOutdoors4 жыл бұрын
Wel that’s sweet and all, but can you do a video where a impact won’t get the clutch off, I’ve got a 700ftlb wilwaukee impact and the clutch puller stopped turning and it’s not popping off, I’ve got a 690ftlb air impact and it’s not moving it anymore either, so I have to bust out the breaker bar?
@Hunterworks4 жыл бұрын
Bow Hunting Michigan been a while since I watched this. If won’t come off hit end of puller under load with a hammer a couple times to send a shock wave. That don’t work you gotta cut it off I guess.
@FullDrawOutdoors4 жыл бұрын
Hunterworks Inc. hmmm I’ve got some force on it and have been hitting it pretty decent but don’t wanna break anything, I’m having creeping issues when in gear and not hitting the gas so I just wanted to take it out and clean it up, guess I’ll just hit it with air and put the bolt back on lol 🤷🏻♂️
@FullDrawOutdoors4 жыл бұрын
Do you have a email that I can show ya what’s going on?
@KenSilvers2 жыл бұрын
Hit it like you have a pair, ffs! Really?
@mdood92992 жыл бұрын
On a snowmobile primary, I pack the centershaft full of ATF and grease before sending the removal tool in. It creates an incredible amount of hydraulic pressure and assists with removal. Don't stand in front of the clutch when it lets loose though.
@michaelvoorhees59782 жыл бұрын
Does it get loctite when you put it back on? If so red or blue?
@Hunterworks2 жыл бұрын
Neither
@michaelvoorhees59782 жыл бұрын
@@Hunterworks thanks
@cloudnurdz63313 жыл бұрын
never had a problem with the black puller from amazon but then again i never use a impact on it
@Hunterworks3 жыл бұрын
We see them bent all the time and clutches messed up from not using an impact you been lucky so far
@MrDeleoco5 жыл бұрын
is there any type of dry lube that can be used on this clutch mechanism or points that need to be lubricated?
@Hunterworks5 жыл бұрын
www.hunterworks.com/primary_basic_cleaning_video
@wadewacker72762 жыл бұрын
Excellent video 👍Thank you!! I’m guessing that the same removal and installation techniques would work on a snowmobile 🤔
@Hunterworks2 жыл бұрын
Should be and thanks for comments
@only20s4 жыл бұрын
What was the brand of the puller you recommend?
@Hunterworks4 жыл бұрын
We make one and for the vehicles we don't make one for we still sell one, so just get on our site
@dunejumper00772 жыл бұрын
So I have a question I got a rzr 1000 xp and I can literally watch my primary clutch move an 1/8 of an inch back and fourth is that because I didn’t tighten it enough?
@dunejumper00772 жыл бұрын
That’s on that bolt that holds it on
@Hunterworks2 жыл бұрын
@@dunejumper0077 I would have to see that email me a short video or text it to our number at hunterworks todd@hunterworks.com 601-771-0070 and I’ll look at it Monday
@isaiahgriffith78964 жыл бұрын
My primary grenaded and the rear sheave is still stuck on the crank. What’s the best way to get the rear sheave off?
@Hunterworks4 жыл бұрын
Isaiah griffith use a clutch puller. Guessing the center part still there.
@isaiahgriffith78964 жыл бұрын
Hunterworks Inc. got an email I can send you some pictures on?
@Hunterworks4 жыл бұрын
@@isaiahgriffith7896 todd@hunterworks.com
@mikemaday55995 ай бұрын
Does the clutch have to be calibrated after the install?
@Hunterworks5 ай бұрын
I do not understand what you are asking.
@mikemaday55995 ай бұрын
Is there anything I need to do after I install it, or is it all set ready to go.
@Hunterworks5 ай бұрын
@@mikemaday5599 still not understanding the question so I will answer based off what this video is about, take it off and put it back on, nothing to do it. Recalibrating is buying a clutch kit and installing it after you made some change like larger tires, sand riding or high elevation riding. You recalibrated the clutch to work with what you have or did or where you ride.
@claytonjackson27813 жыл бұрын
What kind of impact setup are you using ?
@Hunterworks3 жыл бұрын
Milwaukee 1/2" 18v
@cobycrisp3262 жыл бұрын
If I stripped the threads inside the clutch to pull it.....what do I do now
@Hunterworks2 жыл бұрын
I don't know this one, thread chaser maybe
@gadsden27racing4 жыл бұрын
Do you need to use locktite when reinstall?
@outdoorzone2 жыл бұрын
No locktite!! It sits on a tapered shaft!!
@dannylopez87803 жыл бұрын
PLEASE HELP !! So I put a new belt on my rzr bc it ripped the last one and once I put it on I tried yup it into gear but once I do it turns off triying to pull
@Hunterworks3 жыл бұрын
I think I am following you, take a look at this www.hunterworks.com/grinding_into_gear_creeping
@codybumgardner90894 жыл бұрын
how can you get the primary clutch off once the treads have stripped out?
@Hunterworks4 жыл бұрын
Assuming you mean threads where the puller goes not the threads in the crank where the bolt goes that holds it. I don't know of a good way, may wind up cutting it off
@krazium1776 Жыл бұрын
i love this guy lol
@Hunterworks Жыл бұрын
I probably just like you!!! HEHE
@krazium1776 Жыл бұрын
@@Hunterworks Well unfortchantly my rzr blew up today after doing the top end lol
@Hunterworks Жыл бұрын
@@krazium1776 That sucks
@dennyryan60782 жыл бұрын
I have a Kubota Xg850 how do I remove primary clutch?
@Hunterworks2 жыл бұрын
Not sure, assume same way. Never seen that clutch
@barriefarmsjr5 жыл бұрын
How do you keep it from turning over the engine
@Hunterworks5 жыл бұрын
Use an impact
@danr107617 күн бұрын
I have the same noose
@nathancompton92163 жыл бұрын
I need a primary clutch for a 2017 rzr 1000 s do u sell them
@Hunterworks3 жыл бұрын
we sell the XP 1000 for it, only difference is a one way bearing in yours and two way in XP
@mikemartin35334 жыл бұрын
This is the video where you call the puller a hunter works hardend tool and to buy yours The one you sold me is a EPI preformance tool not hunter works RZR/ RANGER
@Hunterworks4 жыл бұрын
True, however this video is not a XP 1000 Ranger, you can't use these methods on a XP 1000 Ranger, that clutch comes off in two pieces. Sorry for the confusion
@Hunterworks4 жыл бұрын
click the show more part and read the notes
@michaelcrabtree13694 жыл бұрын
Does the 2017 and 2018 900 s rzr use the same puller?
@Hunterworks4 жыл бұрын
yes 11-20 use the same
@michaelcrabtree13694 жыл бұрын
@@Hunterworks thank you
@TwistedOff Жыл бұрын
👍
@GeorgeSzymanskiАй бұрын
Now my bolt broke inside how do I get it out
@HunterworksАй бұрын
That I can't help with, never had it happen here.
@djbarela44 жыл бұрын
What if you can’t remove the nut with a impact gun ?
@Hunterworks4 жыл бұрын
Assuming you mean the bolt not nut that holds the primary clutch on, get a bigger impact.
@djbarela44 жыл бұрын
Hunterworks Inc. got it had to buy An air impact gun ha but the deed is done
@djbarela44 жыл бұрын
Hunterworks Inc. thank you
@GlennPhilipbar7 ай бұрын
Any one know the brand model # and were to buy?
@Hunterworks7 ай бұрын
Brand of what? Buy what?
@williamnielsen94185 жыл бұрын
Are use a torque stick with my impact it seems to work for me
@Hunterworks5 жыл бұрын
Good idea!!
@kmadamsable4 жыл бұрын
Works every time!
@rigobertoalatorre29222 жыл бұрын
@@Hunterworks I don't think so been orking as a auto tech for 19 years am use to work with torque wrench ,torque stick and just my air and cordless tools , bought my rzr and have been doing a lot of work but when I bought a factory primary clutch and use my torque stick with my cordless I broke the clutch assembly..got a second one and use my snop on torque wrench and broke it again..used my cordless as you explained on this video and no issues LOL
@74beeper975 жыл бұрын
You've been busy
@Hunterworks5 жыл бұрын
Gonna be busier on this
@fourpropfpv92463 жыл бұрын
Torque bar would be useful for that
@Hunterworks3 жыл бұрын
I agree, I really need to get a set
@jerettludlow12262 жыл бұрын
Sorry I don’t own a Milwaukee, dewalt don’t get the job.