My automatic transmission went out and I replaced it with a manual, this series really helped me thank you so very much for making this.
@capster154 жыл бұрын
Just about to fall asleep! Then Bam part 2! Lol now I'm online looking at new Milwaukee tools! Thanks Rob! Can't wait to see the wiring part of it.
@TDBANK334 жыл бұрын
you saved my ass with this video, now I know what im getting myself into
@justinsfamilyvlogs13994 жыл бұрын
Thank you for all your time and help
@AutoMotoMechanic2 жыл бұрын
Drilling the clutch hole was super easy tons of room. The hard part was wiggling the brake and throttle pedals out and in. Your videos helped me get my swap done very quickly, knowing what I was getting into after watching. Thanks for sharing.
@hush22performance12 жыл бұрын
Thank you!
@ryukx46742 жыл бұрын
@@hush22performance1 with the nss and the clutch engagement sensor do I need the wiring harness from the 5 speed or can I use just the plugs and wire them into my system somehow?
@hush22performance12 жыл бұрын
@@ryukx4674 In this video we wire them up ourselves using the plugs from the manual clutch
@ryukx46742 жыл бұрын
@@hush22performance1 awesome thank!! Sorry about halfway through watching lol bit I have 96 accord lx 5speed donor car and my 96 lx auto I'm doing swap on rn!
@pFbSpecV4 жыл бұрын
So crazy the amount of work needed to do a auto to manual swap! To me at what this costs for a shop to do its almost better to just buy manual shell.
@josevillalta2486Ай бұрын
Thank you
@nicolasrmatos4 жыл бұрын
Hey man, just finished this swap last week, on the clutch pedal i had the same issue! All i did was drill a bolt from the pedal to the top and adjusted it to the correct high. I did a f23a swap in my 96 accord lx.
@ryukx4674 Жыл бұрын
You still have the f23a??
@nicolasrmatos Жыл бұрын
@@ryukx4674 yes i do
@ryukx4674 Жыл бұрын
@Nicolas Rodriguez can I ask a few questions??? I just bought a jdm f23a and about to drop it in with manual trans, I'm in a 96lx accord automatic f22b2 base model
@nicolasrmatos Жыл бұрын
@@ryukx4674 thats the same model i have.
@nicolasrmatos Жыл бұрын
You can ask me anything
@cesarcpx3864 жыл бұрын
Is for a 98-02 Accord the same process with the neutral safety switch?
@jamesclapp30873 жыл бұрын
Hi, Nice swap, learned a lot. Can the intermediate shaft be used with a auto trans? I want equal length shafts.
@hush22performance13 жыл бұрын
Automatic transmissions of this generation do not come with an intermediate shaft
@grandazzo66343 жыл бұрын
I am doing a swap an f-23 with h22 transmission I'm not sure if I can use automatic half shaft because I can't find it manually can you tell me if it's the same manually to automatic half shaft
@danrivera76144 жыл бұрын
Not critiquing but the screws on the side of the armrest do not need to be removed that holds the metal bracket in the inside of the armrest down
@martinrascon52422 жыл бұрын
Sabes que soporte de trasmisión puedo usar para el honda Accord 91 2.2 para conversión a manual por favor
@Cavarsea7572 жыл бұрын
How did you wire the reverse lights?
@jacknoir74312 жыл бұрын
Any idea why my shifter cables don't seem to fit? They're just a lil too short to clip the cables to the shifter when the shifter is bolted in
@detlovely3 жыл бұрын
What happened to the video for the neutral safety switch ?
@NVzla4 жыл бұрын
Thanks
@righty-tightybuilt5483 жыл бұрын
Hey brother if you can get to me asap that will be great! I am stumped on my auto to manual right now I just seen that the throttle cable to the auto it runs all the way to the front of the auto trans.. but the manual doesn't have that long part to the front of the trans just the throttle cable right at the manifold.. pls let me know what to do I am stuck and my car is torn apart and not running due to this issue..
@bsproductions6422 жыл бұрын
A year late but that’s the kick down I believe, why your auto down shifts when you put your foot to the floor
@AshtonAudioworks4 күн бұрын
I tried to drill out the bracket but it just won’t come out of my donor car. It’s now mangled and still stuck in the car!!! What do I do?
@hush22performance14 күн бұрын
@@AshtonAudioworks try again
@AshtonAudioworks4 күн бұрын
@@hush22performance1 I drilled several now very large holes and it’s still barely budging. It’s like the whole thing is welded on. Is there any other way? How would I go about fabricating a bracket?
@AshtonAudioworks3 күн бұрын
Now posting on here just for updates in case anyone else is stuck. You can drill or sawzall from under the wiper cowl, but I still couldn’t get mine out. It’s so mangled now that I don’t know if I can use it.
@danrivera76144 жыл бұрын
Good video though
@2b2bs2 жыл бұрын
How much u charge to do it
@gooooooobs743 жыл бұрын
any solution if im not able to find that bracket to mount weld in the body
@hush22performance13 жыл бұрын
Make one
@gooooooobs743 жыл бұрын
@@hush22performance1 i figured so. thanks hush, if youd be interested in making me one id pay you. ended up snapping a clutch pedal im on my second one not doing that again
@thebluntedcarguy71634 жыл бұрын
There are metal spacers that you needed
@daverussell54774 жыл бұрын
How do I put a distributor with internal coil. Wire harness????????
@AshtonAudioworks4 күн бұрын
Did you figure it out?
@kevculmstock13 жыл бұрын
This guy does really good work. But the amount of money you would spend on the conversion seems a little unpractical. You would probably be better off just tracking down a 5 speed manual already installed.
@ryukx46742 жыл бұрын
I bought everything for my swap along with spare motor for 250🤷♂️