Husky 60 Inch 10 Drawer Toolbox Work Bench Review

This is a video showing the assembly of a Husky 60 inch 10 Drawer Toolbox Mobile Work Bench. Subscribe for more garage updates.
Model # HOTC6010BB2M
Internet #300659016
Store SKU #1002227127

[@chevy5137]

Nice, I'm getting the 56" chest today and I'm stoked and after watching you I am going to use the same method you did of laying it on it's back to install the casters and now have the confidence that I will be able to put the caster on and lift the bottom box back upright myself, thanks for the vid!

[@PaganWizard]

I have found that rather than locking all the drawers in place for either moving, or installing wheels, the easiest way to handle the big boxes is to remove the drawers which effectively eliminates more than half the weight of the box.

[@TheGarageVlog]

That is a good idea and makes sense. Thanks for watching!

[@TheLexiconDevils]

Every dickhead leaves the drawers in

[@TheLexiconDevils]

Using a trolley jack is also too hard for the youtubetoolboxreviewer 🙄

[@ocmacman17]

Don't know where you got yours, but mine arrived from Home Depot yesterday with a very deep scratch along the top up to the Husky logo, bent, scratched all the way around the damn thing. I didn't even unpack it. They are coming to pick it up on Tuesday.

[@jeffparker360]

I am a big fan of Husky boxes and have done a few videos of them. Great video and just subbed!

[@TheGarageVlog]

I'll definitely have to check out your videos on them. Thanks for watching!

[@nevadagunbros]

Awesome review! Im getting one of these husky's

[@B2Rockin]

Great review! Thanks man!

[@guajardomt]

Nice review, thanks! I just ordered one.

[@pignock6725]

Good Video. Thanks for the time lapse. Background music was low key and not distracting. You have good editing skills. I down vote folks who turn five minute videos into twenty minutes of nonsense but I subscribed from this video alone. One question: can the panel with the power connections be flipped to the other side? I have a very specific use/location for this that puts the right end against a wall.

[@TheGarageVlog]

The power strip is recessed into the toolbox itself. It would take a lot of work to switch it to the other side. My suggestion would be to mount an additional power strip on the other side, you can buy them at Lowes or Home Depot. Thanks for watching!

[@QuakerSteveT]

great review

[@CIAG4PNP]

great Review !

[@TheGarageVlog]

Thanks for watching!

[@danielgrotjan6823]

It doesn't look like there any way to mount a vice without wrecking the surface and/or interfering with the drawers/cabinet. True?

[@TheGarageVlog]

I would have to agree, you could probably get away with mounting some carriage bolts from the underside up through the wood top, but I've found the top to be kinda soft. I have my vise mounted to a heavy 3/8" steel welding table. Thanks for watching!

[@MrLowrider3]

how’s the height on it ? I’m 6ft and I like tool boxes that are at least over my waist level

[@TheGarageVlog]

MrLowrider3 The height is 38.125 inches from the floor to the top work surface. Thanks for watching!

[@TierNoneOperator]

Does the top drawer actually slide open fully? Or is part of the drawer covered by the top.

[@TheGarageVlog]

The top covers 3.5" of the rear of the drawer, it's not too bad though.

[@stefvi]

Could the packaged box fit in the back of a pickup or is a trailer required to transport?

[@TheGarageVlog]

Yes, it could fit in the bed of a pickup. It's really heavy, 442 pounds, so you would need a forklift or a creative way to unload it. The trailer just made it easier in my situation. Thanks for watching!

[@stefvi]

The Garage Vlog thanks! We got it in the truck with the help of a few guys at Home Depot. It was already assembled. Now the problem is getting it out. We’re taking it apart as much as we can and hoping some guys will respond to our help ad soon. Lol

[@ChristianG1teg]

After a few years how has it held up? Does the Matt look get dirty faster?

[@TheGarageVlog]

It’s been holding up great! The matte finish doesn’t get dirty any faster. The drawer handles are a semi gloss, so the finger prints wipe right off.

[@SATXrattlesnake]

Just bought the same tool box but the top lock doesn't seem to work, I feel like I'm missing something. Did u have any similar issues?

[@TheGarageVlog]

hiv rattlesnake I didn’t have any issues with my locks. You have to make sure the key is lined up and fully seated in the lock and all the drawers are fully closed with nothing obstructing the locking mechanism. Maybe make sure the lock is lubricated with some WD40. I know it sounds like obvious stuff, but hopefully that helps!

[@jarvisrinklebaker5450]

Looks good. Wouldn’t last 5 years in my shop but it looks nice. Also, the large top drawer only hold 100lbs? that’s laughable. That drawer should be at least rated to 240lbs to be actually usable.

[@SurviventheOnslaught]

you look like red beard from red beards garage

[@jakepennington8507]

Eill top draw store deep sockets standing upright

[@blakheaven1]

Just got mine but cant find the overhead shelf, where was it packed?

[@TheGarageVlog]

Jake Cook Congrats on your new purchase! My top shelf was packaged in the top drawer of the toolbox. There were two versions, only the toolbox that came with the sliding pegboard included the top shelf. Hopefully you have all your parts, thanks for watching!

[@flippingcars3307]

Helpful!

[@Hector-zk5gg]

How’s the top wood holding up?

[@TheGarageVlog]

The top is still holding up great. I mainly use it as a computer desk. I have other benches for actually doing work on. Thanks for watching!

[@Hector-zk5gg]

@@TheGarageVlog thanks for the feedback. Looking at this box and just wondering how the top would hold up if some light work done on top of the box

[@MrZarono]

4 1/2 minutes and you didn't show any of the actual storage area.

[@Jordan882007]

Where did you order it from? Apologies if you said and I didn’t catch it.

[@Honda_life_2020_]

Was it free?

[@TheGarageVlog]

Captain Obvious No, I bought it at Home Depot.

[@maxlove4821]

🤔👍🇵🇷

[@dennispolito8996]

That fucking tool box does not weigh 500 lbs haha

[@TheGarageVlog]

You got me, just looked it up, it was 442 pounds lol