Husqvarna 137 Chainsaw No Start

Lets take a look at a Husqvarna 137 chainsaw that won't start. This one has a fuel tank full of nastiness and rotting fuel lines. The carb also needs to be gone through and I'll show you how I do it. #smallenginerepair

[@johnhinton2003]

Perfect information for what I need to rehab my son’s Husqvarna 137. I appreciate the great camara angle and your voice over narration. Well done👍🏼

[@TheGreasyShopRag]

Thanks and thanks for watching!

[@marcushunt63]

Awesome! I may or may not have spent an hour on the fuelline hole

[@TheGreasyShopRag]

Did you drill it out? Did you drill it too big 😔

[@alans.4658]

Excellent Scott. Another masterclass repair video in the books

[@TheGreasyShopRag]

Thanks for watching!

[@MrsSunshine75]

Nice repair as usual, keep ‘em coming!

[@TheGreasyShopRag]

Two a week whether you need em or not!

[@tedpergolizzi6455]

What’s happening my man, nice vids, helped me a lot. Like your style. Hey you think you can do a vid on properly tuning a two cycle carb. Specifically a chainsaw that after carb is cleaned and rebuilt, it kicks over, runs for maybe 10 secs when pumping throttle, then dies. It always seems like a chore for me and more luck when I get it properly than anything. I’d love to understand it. Obviously, if your able too. Thanks for all the great vids, please don’t stop. Ted from Long Island.

[@TheGreasyShopRag]

Some sanity checks should be made before trying to adjust the carb. Are the fuel lines reinstalled correctly? is the impulse line on correctly or is there a gasket thats blocking the impulse hole? Are the primer lines on correctly?

[@tedneitzel]

Good work as always!

[@TheGreasyShopRag]

Thanks!

[@JoshB88]

Another great video

[@TheGreasyShopRag]

Thanks for watching!

[@toyotagtcoupe8487]

Cool man, these vids are helpful . I'm learning all the time.thanks

[@TheGreasyShopRag]

Thanks for watching!

[@chrischiampo7647]

Excellent Job Very Thorough Just The Way I Like To Be on a Repair 😊😀😎👍🏼

[@TheGreasyShopRag]

Thanks 👍

[@KensSmallEngineRepair]

Nice Job Scott! I had one of those come in with a carb that the customer tried to disassemble and broke so he bought the Amazonian 19.95 Carb and parts kit. What a POS. The linkage would jam if you applied the throttle hard and then fall off! OEM always with these, especially the cheaper Poulan variants.

[@TheGreasyShopRag]

Ya my luck with aftermarket carbs isn't good.

[@steveriggenbach90]

Great info , liked the extended run time at the end. I assume that you use blue loctite.

[@TheGreasyShopRag]

In this case blue. I keep green and red for special occasions:-)

[@steveriggenbach90]

@@TheGreasyShopRag I’ve got red, blue and orange. Never heard of green

[@TheGreasyShopRag]

@@steveriggenbach90 Green creeps into the threads. I use it on idle screw that seem loose. Make the adjustment, put some green stuff on, hope the customer leaves it alone.

[@steveriggenbach90]

@@TheGreasyShopRag thank you for all your help

[@albertkropp]

Nice one, man! I've not rebuilt many carbs yet, but from the ones I have done, it seems that the micro-screen protects most of the internals from getting so dirty that using an ultrasonic cleaner becomes necessary. What's your experience been on that?

[@TheGreasyShopRag]

Its almost to the point that if I feel I need the ultrasonic cleaner then I explore the cost of replacing the carb instead. Of course if they need it right away then it gets the bubble bath.

[@williamemerson1799]

The fuel pump and metering diaphram kits available just from the dealer? I really don't want all the different extra ones that are available online. 👍🍻

[@TheGreasyShopRag]

The ones I use aren't oem parts from husky or echo. They are original walbro and Zama kits supplied through major parts distributors. I've never tried buying a kit online so can't help you.

[@thomasfrost6993]

I've got a question for you. I have a Husq 142 e series saw. The oil pump system is designed to be constantly oiling the bar. Is there an upgrade I can get so it only oils when the clutch is spinning like it does on the Husq 340?

[@TheGreasyShopRag]

I'm not aware of a kit for that.

[@thomasfrost6993]

Crap! That's the only thing I don't like about this saw. It alway leaves a small oil puddle after use. @@TheGreasyShopRag

[@ianvaldivia1993]

Were did you get you electric screwdriver i need one badly!

[@TheGreasyShopRag]

It was purchased on amazon. I've gone back to look and this exact model is no longer available.

[@drmikeyb1]

Please forgive the stupid question Scott, upon drilling out the fuel line line hole into the tank did you just blow out the debris. I know but im leaning im sorry.

[@TheGreasyShopRag]

I didn't do anything more than what you see in the video. I like to think the only stupid question is the one that isn't asked. Thanks for watching!

[@drmikeyb1]

@@TheGreasyShopRag thank you for that. Some would have jumped all over that. Take care brother

[@anthonyromeo1988]

The amount of husky’s you work on.. im going to stick with stihl… lol

[@TheGreasyShopRag]

We're a husky and echo dealer but will work on whatever comes through the door. Thanks for watching!

[@mendonesiac]

Why do Stihl guys act like cult members?