If you subscribe you could be in with a chance to win lots of prizes! In every new video we will be picking one lucky subscriber to win! We will be starting this very soon so make sure you watch our most up to date videos!
@hbhb81732 жыл бұрын
Would you guys ship to the United States of America for a extra fee?
@MachineryNation2 жыл бұрын
@@hbhb8173 I’m afraid we can’t ship products but our prizes in our giveaway are currently available to all subscribers worldwide.
@Sensei9482 жыл бұрын
@@hbhb8173 Friend, how best to position the L nozzle .....?
@raymondchatfield30072 жыл бұрын
I have had a 395xp for 2 yrs now , it is the fast cutting saw I have ever used , & I have been using saws for 35 yrs now , brilliant saw tested and proven ..
@josepodasdemadeira Жыл бұрын
👍💯💯🙋
@DirtRoadLanding2 жыл бұрын
The Husky 395xp for the win. The 395xp doesn't have a computer, a USB port, and doesn't need a laptop computer to diagnose any problems. The 395 is a simple, bulletproof saw that will last and last and that anyone can rebuild the entire saw with just a couple of wrenches.
@MachineryNation2 жыл бұрын
True story 👍🏼 but the nex 585 will be similar to this 👍🏼
@jamesstewart99702 жыл бұрын
Not to mention the mods you can do to the 395 and really wake it up!
@KRAVATTNET2 жыл бұрын
@@jamesstewart9970 but you can do that to a autotune saw also. A ported 572 give more power than both the 395 and 592 :)
@ilyathomas8813 Жыл бұрын
I'm still rocking the 394 xp
@7eis Жыл бұрын
Also it doesn't sound like a concrete saw banging the limiter. The 5xx series pierces my ears with their exhaust pitch
@olehemlock3 жыл бұрын
592 spent 5-6 seconds 4 stroken. Would have been a lot faster if he could of kept it in the wood.
@rooster3019 Жыл бұрын
Yes, the 592 needed to be run through its carb initiation routine. It is running very rich there.
@jimbojohnny82479 ай бұрын
Yes that’s what I seen. Just let it eat the wood like the 395 did. Than the times would have been a lot better.
@aussiehardwood61966 ай бұрын
Correct. The operator held back both saws because his technique of keeping either saw under load was poor. He should have kept the bar horizontal right through the cut applying enough pressure for optimal speed. I bet I could drop cut times down by 2+ seconds easily.
@AnonbinArymouseАй бұрын
@@aussiehardwood6196Have a video of your cutting technique?
@subblegum Жыл бұрын
I was running this saw for about 2 hours at about a 30-50% duty cycle kzbin.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
@peaceriverpowersaws95342 жыл бұрын
Holy snappin, get someone on the saw that knows how use one! KEEP THE SAW IN THE WOOD!
@bevis2265 ай бұрын
592 is rated at 7.6 hp @7,800 rpm. 395 is rated at 6.6 hp @ 6,000 rpm. One thing to note is that the stock clutch on a 592 is tuned to engage higher in the torque band 4,300 rpm for the 592 and 3,400 rpm for the 395. If you were to swap the clutch on a 395 you would not notice any difference between the 2 saws while cutting. This is why, 395 Max Torque is 5.9 Nm and 592 Max Torque is 5.87 Nm.
@davidkelly87153 жыл бұрын
The 395 still undefeated. Thanks for the video.
@MachineryNation3 жыл бұрын
Thanks for watching!
@hbhb81732 жыл бұрын
They look so big and ugly though reminds me of Dodge
@JVR-gd7zw2 жыл бұрын
592 would catch second hand electrical problems from dodge.
@h.m.a.20373 жыл бұрын
Great video lads.i was waiting for this.the new 592 looks to be faster. Still the 395 XP is my favorite.😉💪💪💪🤝
@MachineryNation3 жыл бұрын
Thank you HMA 👍🏼
@TheWoodsmanMilling3 жыл бұрын
Ash is good for making furniture, axe handles, and it burns great! Can't go wrong with how you use it!
@karlansell78853 жыл бұрын
You can't use any of that as a fair comparison. Rocking back and forth is taking chain out of the cut. Do it again and just cut straight through. No rocking on the dogs.
@iraagans31443 жыл бұрын
Thanks for redoing the video, nicely done gents speaks to you integrity.
@MachineryNation3 жыл бұрын
Thank you Ira. We’re happy to to admit our failings 😂🤦🏻♂️
@weofnjieofing2 жыл бұрын
That 592xp revs like a 50cc! It’s insane! Gotta be the best 90cc on the market!
@reillystsb3 жыл бұрын
I think with a little bit of work on the 395 that thing would be a beast..... That 592 runs really good...
@VinnyMartello2 жыл бұрын
I have a bone stock 395 and it pulls a 36 inch bar quite well.
@kellychase579 Жыл бұрын
Love this channel! Would like to see a comparison of 592 to 585 to see if autotune saw is that much better? Keep up the good work.
@nelsonthekkath48302 жыл бұрын
Husqvarna..👍👍👍 Remember the old 281?? The peoples are ready to buy that even now!!
@Lysergic7210 ай бұрын
Got a 281 that I put a 288 barrel and piston on. What a beaut saw. Just rebuilt a 394 into a 395 and am yet to really try it
@bentwedgestanleybrand58183 жыл бұрын
Hello from Piqua Ohio. I've been thinking seriously about the 592 XP. To add to my song lineup. Thanks for the great video. Keep up the good work guys.
@VinnyMartello2 жыл бұрын
I don’t have a 592 but I do have a new 395 and I can’t complain. 1100 bucks new in the box.
@XxBigDAWG22xX2 жыл бұрын
I think where you will see the big difference is the time adjusting the chain on the 592 and less time tuning. That being said though professionals can generally do both of those well enough it would prove negligible
@4550andre3 жыл бұрын
Hello!Greeting from Oporto Portugal for you! That 592 hi tec 17.1 air gas gourgeous 🤭💪 395 13.1 made for last …yes have 2101 cranck✌️😜and the legendary bing ping idle sound roars cheers Thanks for your work Bro🙏😉
@stefanfalkenstein20833 жыл бұрын
Is this the newer 6,6 hp 395 with restricted muffler or the original 7,1 hp "open" version?
@MachineryNation3 жыл бұрын
Good question, I have no idea.. at a good guess due to the condition of the saw I would say it is a newer one. I will try and find out 👍🏼
@tikkabrno2 жыл бұрын
@@MachineryNation did you find out?
@nicolemaxwell3440Ай бұрын
Smokin Looking Superb (as always)
@jeepusa66783 жыл бұрын
Super nice video guys, absolutely beautiful 😍 Now I wait for comparison between 585 and 592 And 585 vs 385 or 390xp 😃❤❤
@MachineryNation3 жыл бұрын
We have better videos coming before the next VS video 🤩 stay tuned 👍🏼
@jeepusa66783 жыл бұрын
@@MachineryNation I stay tuned as you can see 😃😂😂👍
@MachineryNation3 жыл бұрын
@@jeepusa6678 haven’t noticed 😜 we love the support 👍🏼
@larrygross7453 ай бұрын
Dat 395 ain’t bogging down. I have one and she never bogged down. She doesn’t scream like the 592. I have that two. Best two saws ever made
@kostasvasilakopoulos42203 жыл бұрын
Nice video guys!! I believe that the 395 is better chainsaw!!
@BRKS-fj2jt3 жыл бұрын
I'm going to buy a stash of 395xp so I don't buy a 592
@rakersdownnz21 күн бұрын
Well done gents, for admitting your boo boo, and for choosing a decent size, and type of wood to test on. The 395 did well considering its age I think. Both great saws, prefer the 395 myself been on the lookout for one for a while, trick for tensioning the chain is to turn the saw upside down, puts the adjuster near you, automatically tips the bar Up (down in that case) for when you tighten the bar nuts. FYI, man boobs do not equal Jumblies = X No, Please get some longer forks for your hoist 😁
@Branko19872 жыл бұрын
Best chainsaw ever 395
@larrygross7453 жыл бұрын
I love the match up.but with ash I’ll use the 592. But for big oak. My 395 is and always will be the monster. Love you’ll
@hornett223 жыл бұрын
Plus are you running a non broken in saw against a broken in one?
@JKSawShop3 жыл бұрын
Yeah I second the motion of letting the two cut at their own speed without putting any force on the saw.
@woofy5483 жыл бұрын
the chain tensioner on the 592 is worth the price difference
@MachineryNation3 жыл бұрын
Defiantly 🤩
@tomr30742 жыл бұрын
Husqvarna 395 been whooping ash since 1994...
@MaxwellBenson802 жыл бұрын
Thanks for the comparison! I am weighing my options on a larger saw to tackle some massive red oaks on my property.
@MachineryNation2 жыл бұрын
Nice, I would love to cut down some big stuff with these saws 👍🏼
@teeweezy752 жыл бұрын
Great video, thanks guys.
@MachineryNation2 жыл бұрын
Thank you for your support 👍🏼
@bill154cub2 жыл бұрын
Bigger cc powerheads go to a 8 pin rim? Tweek that 395?
@jerryekhator7902 жыл бұрын
My Husqvarna 395xp still resting since covid visited Germany. And I want to keep it, power saw.
@MachineryNation2 жыл бұрын
Beautiful saw 😍
@gavinelliot35644 ай бұрын
595 not run in/still tools.??
@maxxwalters28292 жыл бұрын
The X-torq always seem to hold more RPM at a higher load that is the designed. I also notice you where using a C85 chain on the 395, nice video I like both saws I use the 390XP for big bore cutting. I would like to get my hands on a 592XP
@MachineryNation2 жыл бұрын
Thanks Max, you know your stuff 👍🏼
@rsz90182 Жыл бұрын
2:05 sounds like my chevy engine trying to start.
@jimbojohnny82479 ай бұрын
Well I seen what you were doing with them. You walked the 395 down the wood like you were supposed to but with the 592 ya kept repositioning it instead of walking it down the wood.
@solosilver715 ай бұрын
Apparently someone need to show these guys how to run a saw in wood
@paytonmac56653 жыл бұрын
395 I bet will last longer
@egarbforestservices35673 жыл бұрын
Woolworths Lol Shows your age, Moved to Australia from the uk and the first thing I said to my Aussie wife Woolworths!! There everywhere here 😁
@MachineryNation3 жыл бұрын
Get on! I was obviously only 5 when Woolworths closed in the UK 😂🤦🏻♂️
@blackghost17343 жыл бұрын
He went too far over on the first part of the cuts. Gotta use the spikes and really dig in to it, changing position every 3 seconds
@danielpadgett28312 жыл бұрын
Great comparison and I love yall's accent new subscriber here too
@stevenash94873 жыл бұрын
395xp still undisputed champion. A more than capable saw taking 69" sitka spruce including all the buttress legs still on. Please watch KZbin videos.... Steve Nash felling large sitka Bellever Forest. Husqvarna 395xp, serious logging saw
@MountainMetal9 ай бұрын
Why do you keep resetting the Dawgs so often? That's not how it's done.
@damon2772nomad2 жыл бұрын
I just like how the 395 sounds. I miss cutting. I don't think I'll ever sell my saw.
@MachineryNation2 жыл бұрын
Nah don’t ever sell the 395 just buy the 592 as well 👌🏽
@Stihl4life3 жыл бұрын
That side tensioner on my Stihls are great. About time you guys got smart😉😁
@MachineryNation3 жыл бұрын
That was our point, it is a side tensioner on the new 592XP 🤦🏻♂️ and on all New Husqvarna pro saws 👍🏼
@jacquesblaque77283 жыл бұрын
@@MachineryNation And on lots of the better saws. Stihl has no patent on this- look at their pricing and you might think so.
@terryy5610 Жыл бұрын
Stihl's tensioner on the 460 and 660 did not hold up well in everyday timber cutting. Bad to bend.
@roughhewnuk3 жыл бұрын
Great video guys 👍👍👍
@MachineryNation3 жыл бұрын
Cheers mate 👍🏼
@Iswoko3 жыл бұрын
👍👍👍
@Holli6223 жыл бұрын
That 592 screams pretty nice under load, but, all bigger XP/XPG Husqvarna saws that were made before Autotune is probably gonna last a lifetime if serviced right, so i would walk away with the 395, easier to self service and maintain and no fancy things that suddenly makes the saw run lean and destroy the saw.
@MachineryNation3 жыл бұрын
Fair comment Paul. Have you seen that Husqvarna are bringing out a 585 which is 86cc and same body as this 592. The main difference will be that the 585 will have a manually adjustable carb 🙌🏻
@Holli6223 жыл бұрын
@@MachineryNation That i did not know! And i think its great that it will come a new model with manually adjustable carb, not that Autotune is a bad idea, but that its easier to maintain a saw without it for people that use the saw more occasionally. 👍
@Gsxrtrix3 жыл бұрын
What is autotune on a saw? I have a Stihl 251. Does it have this feature?
@MachineryNation3 жыл бұрын
@@Gsxrtrix it’s a feature that automatically adjusts your carb to the correct setting to run at peak performance. Husqvarna have Autotune and Stihl have something called M-Tronic. Your MS250 does not have either, it has a traditional manual adjusting carb.
@Gsxrtrix3 жыл бұрын
@@MachineryNation Understand now. Thanks for the explanation! I’ll look for the manual type on the next purchase if available.
@timberslasher48992 жыл бұрын
Anyone who has used a saw as much as I knows that 2 new chains are never equal. We also need someone who knows how to handle a saw...
@paulhenry10113 жыл бұрын
You were leaning on the 592 way more than the 395.
@tajprior42173 жыл бұрын
thought the exact same thing, but id still go for a stihl though. Lol
@sawboatsndarmwrestling3 жыл бұрын
He said the 395 would bog if leaning more on it, and the 592 wasn’t self feeding enough, time could have been faster
@DirtRoadLanding2 жыл бұрын
I noticed that too
@chadparrish9863 Жыл бұрын
395xp for me wouldn't even consider the other saw
@billybowen30233 жыл бұрын
Nice one! Nearly got a stiffy. I would love a 592 but i just can't afford one. Back to my electric Bosch i guess.👍
@MachineryNation3 жыл бұрын
I know what you mean, I’m still nursing mine down 😂😂
@tikkabrno2 жыл бұрын
@@MachineryNation wiling to sell me your used 592XP 😉 I'm in Australia, no idea when it's available here. Today decided I want/need a big bore ~90cc and can get the 395 but of course there's something new about to drop 🤦♂️
@MachineryNation2 жыл бұрын
@@tikkabrno hahaha I could of probably sold it 200 times 😂 it’s worth the wait! But the 395 is still a good investment 👍🏼
@tikkabrno2 жыл бұрын
@@MachineryNation are they available in the UK now? I'm tempted to just import my own. Last two husky saws I bought in 2014 came from USA. Saved me a bundle too.
@MachineryNation2 жыл бұрын
@@tikkabrno not had a delivery yet 🤦🏻♂️
@brettsamson2043 жыл бұрын
Both are such sweet saws! Cant wait for more content,
@MachineryNation3 жыл бұрын
We’ve already filmed our “Ash bashing” as well as a surprise video that nobody is expecting 😂
@BKelly-f5b4 ай бұрын
The first dog cut on the 592 was 19:12. Then when both dog cuts are shown on the screen together for the head to head comparison it shows the 592 squeaking by with 18:12 with the 395 at 19 flat. How did the 592 lose 1 full second? Seems like to me you all are trying to put the edge to the new equipment. Clearly the 395 took the straight cut and the dog cut.
@HanaBasara3 жыл бұрын
Fantastic video guys!! 💪💪💪💪💪💪💪💪💪💪💪🍻🍻
@MachineryNation3 жыл бұрын
Cheers Ovidiu 👍🏼
@Bigmike3406E7 ай бұрын
My 394XP Will put both those saws to shame . I have 3 of them and everyone of them is a freak ,my 395 can’t hold a candle to my 394s
@tonytribisonna98862 жыл бұрын
I would like give my opinion on the Husqvarna 592 xp that I have been using last month. It’s lighter and a little bit smoother than my faithful and most reliable 395 xp I’m lucky to own 2 of them the best 94cc saws ever made. What I found with 592 it’s faster cutting saw with 28 inch bar when I switch over to a 36 inch bar different story the 395 xp seems to handle it better another disappointment about the 592 xp is the air filter base seal doesn’t seal up as well small bits saw dust getting through into the carburettor not happy about that. The 395 xp is the best air filter set up I have ever seen completely sealed. I hope Husqvarna will address this problem with 592 maybe they could improve the seal on filter apart from that it seems to cut well with 28 inch light weight bar.
@hardcoreplayafromthehimala48882 жыл бұрын
What about ms 660?
@tonytribisonna98862 жыл бұрын
Yes sorry I did forget to mention ms 660 they were a good strong reliable saw when in production. Haven’t had a lot to do with them they are great 👍 saw I would be happy to own one. I’m not one of those guys that’s a Stihl or Husqvarna I like both there’s good and bad both brands.
@jongreca54292 жыл бұрын
Dude needs to learn how to make a cut lot of wasted time moving unnecessary
@kevinkollman91622 жыл бұрын
Not enough difference to matter' both great saws//
@Autigers20132 жыл бұрын
That 592 bogged down just as much as the 395!!!
@MachineryNation2 жыл бұрын
Needs a professional to get hold of it haha
@MrColtnutz2 жыл бұрын
Need to learn how to make the saw eat.
@MachineryNation2 жыл бұрын
Lots of learning required 💪🏼
@joesantora8855 Жыл бұрын
I've been looking for those Husky trousers you guys have. Where did you get them?
A saw cutting wood should never ever hit the rev limiter, it sure annoys me seeing some people run a saw!!!!
@mikeskidmore675411 ай бұрын
In the USA the Emrald Ash Boer is killing all of the Ash Trees .,.
@johnclarke66472 жыл бұрын
They look about the same to me within statistical differences.
@jasonfontenot596 Жыл бұрын
The first 2 cuts with the 592 were 21:17 19:12 the 2 cuts with the 395 were 21:07 19:00. The the 2 cuts side by side show 18:12 and 19:00 What kinda camera trickery are yall trying to pull. When did the 18:12 cut with the 592 happen?
@cungcapmaycuamaycatco2 жыл бұрын
Ok .bạn diển tả hay đấy
@lowellmiller66632 жыл бұрын
390xp modified 👍
@VinnyMartello2 жыл бұрын
I got a new in box 395XP for 1100 American dollars and it runs like a champ. What’s the 592 going for?
@TheGuitarRoom2 жыл бұрын
In the US the 592 is roughly $1,400.00 depending on the chain you get. I have both the 592XP and 395XP. They are both fantastic. If you get 395, put on a 32 inch X-Tough “Lite” bar on it. The balance point will be absolutely insane and it will feel like a lighter saw. If you get the 592XP, consider the 28” X-Tough “Lite” bar. You won’t believe the balance and the feel. The 592 is fatster, more torque and lighter. Less gas’s too. The 395 is a big powerful old school engine. The 592 does self adjust, is better and lighter and will fatigue you less all day. They are both fantastic.
@TheJanope132 жыл бұрын
That 592 is an absolute fucking weapon . Spent alot of its time hitting rev cutout just in the short time to reposition the dogs to dig it into the wood. Didn't bog dowwn at all. If only i could get over that stupid humpback design on husky saws, looks like a bloody halo gun and that god awful orange everywhere. from a stihl bloke lmao
@bryantitus66343 жыл бұрын
Clearly the 592 revs higher, self feeding with the same chain it would walk away from the 395. There isn't a load of difference. Similar to seeing the 572 run, they seem to scream under light load but want to cut out (sounding) once you lean on it some. But it probably sounds more like that because they rev so much higher under light load and likely come down close to the same RPM under heavy load but aren't coming from as high.
@austindenotter192 жыл бұрын
The 572 only seems louder but has higher rpm in cut than 372 or 576
@matthewbrady70802 жыл бұрын
U got it twisted cause its the other way he was basically back peddling that 395 cause u dont hear it loose any rpm in the cut where that 92 allmost wanted to bog somewaht on that 2rh round i own a 395 and that saw aint guna take no 395 the day they came up the the 395 and hell the whole 300 sereies was a special day i love the 200 seies also
@maxxwalters28292 жыл бұрын
The X-Torq designed does this since it cycles more air in the engine but the X-Torq designed keeps a high RPM in heavy load, they are starting to get closer to the high revs of the non X-Torq 300 series
@maxxwalters28292 жыл бұрын
@@matthewbrady7080 That is why I do not like Auto Tune. I use the 390 and I wont give it up I also miss the 200 series that reminds me that the 395 had some designed from the 200 series
@waynejohnson98552 жыл бұрын
@@maxxwalters2829 biggest plus of the auto tune is it stay consistent in any weather, I have a 390 and right now I have a demo 592 I have cut some with it and it cuts but today I will compare it to my 390 and see what I think. I really like the saw from the 2 tanks of gas I have cut but don’t think the difference is that great to buy it. Most people are in awe of a new toy and don’t realize that when doing large amounts of firewood the cutting is the easy and least time consuming part.
@nuutsepat46752 жыл бұрын
Is the best my brother, i am oprator chainsaw, in Bali 🙏🙏🙏💪💪💪
@prtech78057 ай бұрын
395 XP VS 592XP 94.062 CC vs 93 cc 6.6 Bhp vs 7.6 Bhp Old one is not gold. 592xp win❤
@maxchainsawchannel78323 жыл бұрын
Good to meet you friends
@bryantitus6634 Жыл бұрын
Bottom line... 90c class saws are animals. All of them. 26" ash log and these saws act like it's limb wood to the typical firewood saw. They aren't fun to run all day, but boy are they fun to run for short spells! I challenge anyone to not smile while running one of these in big wood for short spells. Got a 394xp myself. My buddy has a 661. Self feeding, the 592 revs higher. But Husqvarna themselves rates both saws at having the same amount of torque. I can't help but feel like the 592s constant rev limiter bashing when not loaded heavy will effect longevity. Time will tell.
@cadenconverse152 жыл бұрын
395 fs
@hanifaipa84212 жыл бұрын
395xp still the bos
@tgsgardenmaintenance46273 жыл бұрын
Only a gardener and my 455 does everything I need but still want them both!, 😂
@MachineryNation3 жыл бұрын
Haha, never have too many 🤩
@johnmitchell77672 жыл бұрын
Try X factor you’ll be in with not a chnce
@MachineryNation2 жыл бұрын
He has already applied for the Z factor 👍🏼
@julianmortensen95174 ай бұрын
395 will out preform in the woods and after time used.
@tepalto2 жыл бұрын
Husqvarna 2100 CD is the best Saw
@MachineryNation2 жыл бұрын
That’s a blast from the past, nearly vintage 👍🏼
@arypma3 жыл бұрын
Whats up with the ghosty frames in this video
@MachineryNation3 жыл бұрын
Ooo at what time? Haven’t seen them myself.
@arypma3 жыл бұрын
@@MachineryNation from the beginning. But i guess that's your guys' style
@MachineryNation3 жыл бұрын
@@arypma oh you mean when he cuts out the umm’s and but’s from our speech haha
@arypma3 жыл бұрын
@@MachineryNation no its like i ate shrooms, the movements in the video is trippy like slowmotion arm waves
@MachineryNation3 жыл бұрын
@@arypma you ether had shrooms or your reception is bad hahaha
@lordkeemo2392 жыл бұрын
Oh Lord! No point in the video...they both cut wood!!
@MachineryNation2 жыл бұрын
Love it Lord! Chainsaws that cut wood… who knew haha
@heruheru6622 Жыл бұрын
395xp yg dia temukan kayu memotong semakin besar
@northtrailadventure605410 ай бұрын
I will stick with my 395, I dont want the new tech or the thinner parts
@stuartramage59333 жыл бұрын
Awesomeness
@MachineryNation3 жыл бұрын
Exactly 🤩
@garryaylward80503 жыл бұрын
At 1.3 kg lighter I know which one id take its a no brainer
@Autigers20132 жыл бұрын
That 592xp was 19:12, I don't know where you got the 18 from?
@MachineryNation2 жыл бұрын
No idea, we will have to look back at the edit 👍🏼
@Eric19781 Жыл бұрын
If you wasn’t dragging the dogs on the 395 it would have won
@stuartramage59332 жыл бұрын
Give me 395 all day long .had a 565 did not last a year .saw laid in saw shop for 3 months waiting on husqvarna to decide to fix under warranty. God bless they did. Saw needed ignition module and carb. Sold the saw. I will stick to my old reliable 268 xp .am so glad for vintage saws .Will a 592 become a vintage saw .no .unless u leave it in the box 📦 😏
@threehunter999 Жыл бұрын
Nice❤
@foxfixa3 жыл бұрын
Hmm not much in it !!
@waynepeake322 жыл бұрын
Won't last 6 months to a year under heavy commercial use even moderate commercial use.365 and 395 are some of the last SAWS
@MachineryNation2 жыл бұрын
It will be interested to see how long they do last compared to the ole faithfuls 👍🏼
@cheeseymccheese724911 ай бұрын
His pull back and dog is not correct, seconds are ticking by. Cut tip down then its a quick pullback with chain still pulling you into the log biting the dog in. He could have cut that with 2 pull backs for max speed and i bet close to 5 seconds faster with the 592
@ongvanhenry18922 жыл бұрын
Compare them with japanese chainsaws later???
@MachineryNation2 жыл бұрын
Which saw would you like to see them compared to?
@ongvanhenry18922 жыл бұрын
@@MachineryNation echo cs680s should be on the checklist...thanks in advance