Husqvarna Automower Cutting system

  Рет қаралды 481

Auto Mow Tech

Auto Mow Tech

Күн бұрын

Пікірлер
@redinabloogs8477
@redinabloogs8477 8 ай бұрын
i can't get the center screw off ...i've only tried by hand so far as i don't want to strip the head of the screw ..its on extremely tight ...i have a 310...i think they only did the 310 in canada ....any advice would be appreciated Ty.....it says the cutting system is blocked ....i cleaned it out changed the blades but still keeps saying this and the disk is not spinning very freely ...hence the need to remove that center screw and take a look ...
@AutoMowTech
@AutoMowTech 8 ай бұрын
yes that center screw can be tricky..I use a T handle 4mm to get most off, the odd one I'll try a impract wrench to impact it loose...worst case if it has been striped or carnt be un done I'll cut a line across it with cutting disc on a grinder and use flay head screw driver..we allso have 310 and 310mark 2 here..good for the medium to smaller lawn..I have a customer that has 2,,one front of house and one out the back.
Husqvarna Automower Guide Wires Explained
21:22
Auto Mow Tech
Рет қаралды 9 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
Why We Went With The Worx Landroid Over The Husqvarna AutoMower
10:22
WorkshopAddict
Рет қаралды 469 М.
Husqvarna 305 vs 405x Automowers
11:13
Auto Mow Tech
Рет қаралды 8 М.
What's Inside Your Husqvarna 450x Automower
5:27
Auto Mow Tech
Рет қаралды 409
Wheel Maintenance 4k
18:55
Auto Mow Tech
Рет қаралды 330