HVAC BLOWER MOTOR NOT WORKING CHEVY COLORADO

HOW TO TROUBLESHOOT AND REPAIR A BLOWER MOTOR NOT BLOWING AIR AT ANY SPEED, IN THIS VIDEO, THE ISSUE WAS A BAD GROUND CONNECTOR TO THE BLOWER MOTOR. I ALSO SHOWED SOME HELPFUL WAYS TO FIX IT RIGHT THE FIRST TIME, THAT GIVES ME & AND THE CUSTOMER PIECE OF MIND KNOWING THERE IS NO COMEBACKS LATER.
PLEASE LIKE & SUBSCRIBE FOR VIDEOS LIKE THIS & MORE AUTOMOTIVE CONTENT.

[@evoixdelaluz]

Please support my channel, I have uploaded more videos with great stuff. More specialized tools, more detailed info, I'm trying to take this channel off the ground. I need everyone's help to get it going. so please! Subscribe, share & give my video a thumbs up if possible. because KZbin's algorithm is awesome. thank you all!

[@c.ryanfloria2603]

THANK YOU THANK YOU THANK YOU!!!! I did the resistor replacement on my son's 2005 Colorado but nothing happened. I was gearing up to pull the motor and order one when I watched your video. It was the ground!!!

[@terrybanghart2736]

This is the Saginaw Automotive Giant. Saginaw, Michigan I would like to Thank You personally for making this video. 2008GMC CANYON ANOTHER SUCCESSFUL JOB COMPLETED. THANKS AGAIN.

[@evoixdelaluz]

thanks for the support, don't forget to subscribe for more automotive content.

[@THETRUTHb4u]

It's the paint where the ground bolt is. Just take off bolt and remove the paint to make a better connection for the ground.

[@Umb3rt0av1l]

Excellent video brother!!! you saved me money and time in a shop with something so simple. Thank you very much I really appreciated.

[@reedestate]

You did an excellent job providing detail for a very specific issue. You have a new subscribe from me because of your authenticity and courage to help someone else. I may not need another repair video, but this helped… and I’m a fan of you! I realized the power of you tube years ago, but I’m experiencing the importance of sharing knowledge in new ways. Thank you!!!

[@codymontroy3170]

Good video! Exactly the same problem with my 2012 Chevy Colorado

[@daniellenewton8882]

Excellent video! Thank you for the great explanation! Fixed my problem after bench-testing the blower motor!!!

[@phillis1932]

It perfectly describes how to do it keep it up man

[@alexismoreira1217]

Really good vídeo thanks you help me and my chevrolet Colorado 2008 LT 3.7

[@novafourtwoseven2888]

Great video you did an excellent job I appreciate you sharing the video it answered some of my questions. Keep up the good job!

[@sebastianstarr007]

This is a HUGE HELP!!! Thank you so much!

[@user-of6op8uu2n]

This video saved the day!!! Bad ground was my issue too!!

[@Hello-rw7ry]

I'm a woman and I think you did an excellent job, I just took everything apart and changed the resister and harness and was just fixing to order a new console with the switches but I'm gonna go check my ground right now. :)

[@evoixdelaluz]

sure, give some feedback on that project, hopefully is the ground to, like the majority in here telling me it's the ground.

[@Hello-rw7ry]

@@evoixdelaluz my ground ended up good under the hood but the wiring harness on the passenger side on the floor behind the trim had no power on a few wires the ground included, I opened the harness and they had burnt up. I spliced the ground together to check everything out and lost blinkers and bright lights lol. Went back and made a better connection of the rest and all is well now. My blower is back to working but still only working on the 3rd setting so I went ahead and ordered the new switch control board. Thank you again for your video, I injured watching it.

[@edgarojd2065]

awesome video men that was exactly my problem thanksss

[@Toledost1]

This is the best video and explained step by step, thanks a lot

[@BAMBAMM1]

Exact same problem on my truck, thank you!

[@jloco1980]

Excentente video hermano estove 2 dias buscando ese problema ? Con tu video lo resolvi god bless you

[@evoixdelaluz]

de nada, nomas apoya mi canal y comparte mis videos y dales un me gusta, con eso me pagas por poner esto en KZbin. pronto subire mas contenido a mi canal, ya tiene tiempo que no subo nada, mucho trabajo en el taller.

[@hugocortez340]

Great video you just help me solve my problem thanks a lot

[@rommelpineda3538]

I have the same issue so thank you so much, good explanation 👍

[@evoixdelaluz]

thank you for watching, don't forget to like & subscribe for more automotive content.

[@daniellenewton8882]

Perfect step-by step diag!

[@garygeisert8766]

Hey Thank you. That fixed my truck to .

[@evoixdelaluz]

No problem, please subscribe for more automotive content. will be uploading more videos in the future..

[@johnnycothron7507]

Thank u very well made ...so much help ...cause I have power to all just want work ...

[@juancgalvan59]

Thanks for your video I did everything you did except moving the wires about to do it right now will let you know if it works.👍🏻

[@evoixdelaluz]

did it work for you?

[@TheMotivatedSnail]

Thanks! This was my issue.

[@HayesR.J.]

Thanks for this man!

[@jimgarthoff6319]

Thanks brother.

[@huevosfrios]

Gracias solucione el problema del blower

[@evoixdelaluz]

Don't forget to like & subscribe for more automotive content.

[@chrispatulski8097]

Great instructional video. One question, where did you find the electrical schematics?

[@evoixdelaluz]

by paying a subscription to alldata for the tiny price of 190.00 dollars a month.

[@yeaboi8563]

Great video were can you buy the ground slicing box from

[@evoixdelaluz]

wrecking yard, I don't think gm is going to sell you a piece of harness for that truck, is to old. not very likely that ground harness is sold individually, thank for watching..

[@yeaboi8563]

@@evoixdelaluz thank you

[@stevezenitram2048]

I have same problem, no ground on my dash control fan. I followed all your steps but still no ground on it. So I put ground straight form my PROBE III then my blower started working. So could I put straight ground wire connected to the dash control black wire(ground wire)??

[@evoixdelaluz]

sure you can, as long as you get a good grounding point to hook your ground wire at, you shouldn't have any issues.

[@crakajack9585]

Just ran into this problem going to check that first thing in the morning

[@crakajack9585]

Just tried it out and man YOU a money and time saver big mahalos bro all the way from hawaii

[@evoixdelaluz]

please, don't forget to subscribe and give my videos a thumbs up, that really helps my channel to grow.

[@ljsproductions3006]

Can you post a picture of the new connection

[@evoixdelaluz]

Customer's vehicles, not my own.

[@rob3888403]

How many ground wires for the heater goes to that box on the fender having the same issue I used to wiggle the box and the blower motor used to work but now I wiggle and nothing happens Cut the plug off and I put new terminals but still blower motor not working

[@evoixdelaluz]

what box? be more specific and I might be able to help you.

[@rob3888403]

The black box / plug on the passenger fender by the air filter, I tested the same ground wire on the back of the heater module ,but that ground is good what other ground wire runs through the passenger fender for the hvac

[@rob3888403]

What other ground wire would it be under the hood on passenger side, online says there are 2 ground wires for hvac that go to that ground block /plug next to air filter? You show the 1 ground wire on the back of the heater module but where would the other ground go to ?

[@evoixdelaluz]

@@rob3888403 according to the video, I see two ground wires, one goes to the blower motor switch, one goes to the HVAC control module. I'm not at the shop to go back to my wiring diagrams to confirm it but, just remove the HVAC control module and check the ground at the blower motor switch, if you have a good solid ground at the blower motor switch, then check your blower motor resistor for a faulty connection. does your blower motor work at all speeds or not?

[@rob3888403]

Awesome thanks man , which one is the blower motor switch, I appreciate the help a lot thanks, I thumbs up and subscribed to you ,

[@evertortiz4571]

How did you fix that ground connection ?

[@evoixdelaluz]

cut off the wires at the black box, get a regular loop terminal at auto parts, peel off some insulation on the wires, about 1/4 of an inch, solder or crimp the terminal to the wires, put it back in its place & torque the bolt to 10Nm done.

[@alexismoreira1217]

Where do i buy that power probe

[@evoixdelaluz]

www.ebay.com/itm/332656601663

[@evoixdelaluz]

there is a link for you to look up, although the power probe two like mine is to old to find. that link is for the power probe three, hope this helps.