HVAC Failure Fix | TruckU Tech Tips

Bruno demonstrates how to quickly fix a climate control system with Heater Treater.
Follow Us!
Facebook: www.truckutv.com/Facebook
Twitter: www.truckutv.com/Twitter
Linkedin: www.truckutv.com/LinkedIn
Business inquiries
Website: brentontv.com
Email: [e-mail]
ac,problem,fix,hvac,cheap,quick,how to,install,ford,jeep,chevy,dodge,toyota,honda,two guys garage,2 guys garage,matt steele,bruno massel

[@daleapal]

Show how you replace that while it's still in the truck!

[@timothycollins6583]

Are there videos on the actual procedure for Ram trucks?

[@bobbyb9718]

I would have liked to have this kit for my '97 Cherokee. I had exactly same issue with its blend door.

[@jerrysouthside8597]

I did the heater core replacement in my uncles dodge Dakota it’s no small task

[@santiagofrias6071]

Where do I get this kit at??

[@LIFEISGOOD197]

PLEASE WOULD THIS WORKS IN A 1997 DODGE VAN WAGON B3500 ?

[@izzymorgan2461]

I removed my dash and it has the dual zone sliders in 09 Ram 3500 laramie. How do I push those sliders back in?

[@connieneukam747]

How do you unplug your blend door on the passenger side on a 1998 Dodge ram

[@illidan2ify]

Mode door and blend door are completely different

[@charliesaviakjuk7286]

Need video

[@brentmcmahon8188]

If you lose air flow from system and you hear blower running but very little air flow so take the 3 screws out of motor on passenger side and reach up inside where bower came out and grab the broken blend door may have to spin it to get out put motor back in and full return of max air flow. That is the dumbest thing you can do to your truck just pull dash and hvac box and replace everything and put Dlend door USA they are made of aluminum cnc machined and they will last a life time and replace everything heater core evaporator and all the actuators and only use the factory ones they are the best Dorman are junk. So good luck!

[@moosenbeans903]

I just put my charcoal bbq in the back seat and turn my ceiling fan

[@chrisferguson1797]

How much and how long to ship too 71845 Lewisville Arkansas

[@maddexxx847]

So how is this going to save me any money? I still have to remove the whole plenum. Which is the same thing the dealership would have to do also. You guys are scamming.