HVAC MOTOR PROTECTECTOR EMERSON CORE SENSE FOR SCROLL COMPRESSOR EXPLAINED .

[@kaundabwalya7776]

Wonderful video 👍👍👍

[@jollyscaria1922]

Ssp over lord portacter srll tup m1 m2 24 220 v T1t2 power comprssar potacter 😊

[@jollyscaria1922]

M1 m2 conrold circuit hp swich lp km2 swich winding port hoted model çonrold high lp conlrold senszy systom model B+a+bms conrlld pointed

[@jollyscaria1922]

Conrold wind hot senzing greeing lockout mode sermiter wire rmobving agin fix no 1o r Shoeing lok out bord sysyom

[@davemaldo07]

Paused video at 8:30 to bypass M1-M2. The compressor hadn't run since since 2019, according to history on comfortlink. Awesome video. Many thanks.

[@D2DNYAC]

Thanks for watching

[@Cre666in666]

Thank you so much, encountered one of these for the first time today and struggled to understand how it operates

[@38sohaib]

Wonderful explanation brother. Keep up the good work. Love from pakistan❤.

[@IRONDICKMECHANICALHVACdavis]

Boss video. It has to be a yardman. Teaching this. 100%. Respect.

[@laworder6092]

Thanks sir for your excellent teaching method 👏

[@D2DNYAC]

Thank you 🙏 for stopping by

[@hkhvac270]

Thank you for explaining good luck 👍

[@dodirt2184]

Thank you for taking the time to help me learn 👏🏿🙏🏿

[@D2DNYAC]

Thank you for stopping by

[@abdulsami2148]

Great sir 👏

[@D2DNYAC]

Thanks for watching

[@welcom3779]

Nice explication

[@dangross6134]

Very nice explanation, Will the compressor start if you don't use the t1and t2 or m1 and m2. I changed out a trane compressor to a Copeland and the trane does have the core sense...

[@D2DNYAC]

It will start

[@D2DNYAC]

It will star however its beneficial for the compressor to have this connected into the controls circuit!

[@jasonjohnsonHVAC]

They have software and all you need is a RS485 converter. You can log into the motor protector and get all sorts of information off it

[@D2DNYAC]

Really, is this an emerson software?

[@Randylazz]

Ya learn something new everyday Have A Great Weekend............😎

[@covid-kw9fb]

Awesome info man, thanks

[@RonnieL-k3y]

Im getting 4 flashes indicating scroll high temperature but the compressor is isn't over amping. Could the sensor be bad?

[@D2DNYAC]

Yes, and if there’s no redundancy on the compressor, then it would have to be replaced thus i would replace the module first just in case it’s malfunctioning

[@stratosgiannis4340]

Great vid, keep it up!!

[@thebigpush2835]

Thank you

[@D2DNYAC]

Thank you for stopping by

[@exlost245]

Hi. My coresense keeps flashing green succesively. My compressor.is shutting down about a minute. And can't figure things out..hope you can help

[@D2DNYAC]

Let me check

[@yusufansari8955]

Thank you very much.

[@D2DNYAC]

Thanks for stopping by

[@bradsellers5592]

I'm having a issue with connector not pulling in no 24v. I have 24v to m1 and m2 goin to compressor. If I jump m1 and m2 the compressor will start. Also if I put 24v to coil connector it'll rn just fine.

[@D2DNYAC]

So the module is bad or the thermistor is opened or the compressor is overheating

[@rajphilip4346]

Tks bro

[@D2DNYAC]

Thanks

[@mohamedatef-do6pj]

Very good video Can i contact you ?

[@D2DNYAC]

Thanks

[@D2DNYAC]

May I suggest you becoming a preferred Member of my channel!

[@kwelilukomba6445]

can you please show up and explain the all compressor wiring from mammoth and motor protector?

[@prithwishdey6708]

Please discuss ICM-220 lock out relay Waring and Copland protection (INT69SC)

[@D2DNYAC]

I will stay tuned for that

[@zebbspascua8028]

My old system ZP182KQE-TFD-477 does not have the Coresense compressor protection and said they don"t make that model anymore, Instead they provided with ZP182KCE-TED with Coresense . (The only difference is these models is the motor protection. TFD has the internal motor protection. TEDhas the newer, updated Coresense module. "F" is internal protection. The "E" is electronic enhanced. How can I wire this?

[@SombraLocs]

Are M1 and M2 the ones you can jump out if the module keeps giving nuisance trips, but you want to keep compressor running until you get a new module? Daikin AGZ alarm OffMtrProtect.

[@D2DNYAC]

Yes

[@muralisingh5334]

Please upload video on trane dx BAS unit

[@kwelilukomba6445]

can you please explain how wire core sense to compressor ,solenoid, low and high pressure switches ,hot gas t1 and t2 , m1 and m2 i mean full wiring to compressor components.please need it AsP

[@D2DNYAC]

Okay I will explain

[@D2DNYAC]

T1 & T2 is your core sense power connection , M1 & M2 is to be connected in series with high and low pressure switches

[@binho8308]

i have problem with alert code (red) SOLID (don't flash). Can't you help me fix it?? Do i replace a new once?? Many thanks.

[@D2DNYAC]

Yes! pause the video at 15:10 to see fault codes

[@wasiahmed3202]

If the terminal T1,T2 not use ? Safety device not work (ok) . I do not use safety device. Machine direct supply this terminals (L1,L2,L3) what is possible without safety device compressor work only ?

[@wasiahmed3202]

Already my machine safety equipment available.

[@D2DNYAC]

wasi Ahmed T1 T2 is the power supply terminals, if you don’t connect those then the module is useless!

[@D2DNYAC]

wasi Ahmed The module will not protect the compressor if t1 and t2 not connected, if you wish to protect compressor apply the appropriate power supply to t1 and t2 (24v or 120/230v make sure correct voltage!) then connect m1 and m2 in series with high and low pressure switches

[@riyaz.samsung8568]

SSPS mean

[@D2DNYAC]

SSPS ??? or SPDT!