Making Loud Noises, and Not Heating Or Cooling

[@deanmartin1966]

I really thought it was going to be the fan button. Good video.

[@HVACGUY]

Lol😂

[@MRosati5000]

This is like major surgery.. and I think the customer was a good guy.

[@gordonpotts753]

Contactor is the most overlook component. A dirty contactor can take out a compressor prematurely. Kudo to u Curtis for changing it.

[@Eddy63]

Every time I break up with Klein , they come out with a new product and I fold like a cheap lawn chain 😂🤣😅 Good vid as usual Curt ... Thx ...

[@robalexander7348]

Good one Curtice, a nice multipal repair job,this will keep your customer comfortable for a long time, he was a nice man,he just wanted a nice guy like you for a friendly chat 😊 👍

[@hinspect]

That was a great troubleshooting video. A lot of people wpuld have missed that breaker problem! Thanks 🇺🇸

[@kens.3729]

This Unit looked really similar to another Job you Completed in the past week. Great job, Curtis! 👍

[@JohnstonPettigrew]

That was a nice job you done up in there.

[@corbettknowles9942]

Quitman Georgia is on the outskirts of Valdosta I used to live there in a little town called Morven Georgia it's part of brooks County GA

[@search_eternal]

I was yelling at the screen, the power wire, the power wire, don't turn it on. LOL

[@HVACGUY]

Coulda been worse

[@chuckquinn8026]

😂😂😂😂😂 Me too!

[@bamatractor]

Stuff like that happens more often when your destracted by a spectator.

[@Robnord1]

Yet another informative video. Thanks...and it's great you don't edit out the not so perfect moments that we all have. Keepin' it real! 👍

[@549BR]

Home Line is junk, but you have to work with what you have. Great detective work Curtice. 😎

[@anonymuswere]

sorry about the helecoptering, you guys. some of us have been burn by either noobs or guys just there for the paycheck. it's probably worse up north, here.

[@brunosoares4146]

Que massa essa limpesa na elice do ventilador com a parafuzadeira o eixo entra suave

[@richardambrose3156]

i like that work table.. i had to use the Bumper or floor of a Van...

[@billybrown1979]

you made home owner happy and you was happy to. keep up the good work. be bless and safe.

[@earlestes8649]

I would rather have them there than standing inside peaking out and driving me crazy, miss daisy 😂. lol

[@143tinaed]

Curtis, you always do a great job 👍

[@mufmuf97]

I usually run the ground on the motor back to the top side of the stud if it won't reach anywhere else. Although it makes no difference.

[@jackedwards7420]

Hey Curtis, we have that same issue with city/county names here in Tennessee: The next county to our northeast is Chester County with Henderson as its seat then the next county north of that is Henderson County with Lexington as it's seat!! Then we have the City ofJackson in Madison County here in a West TN then Jackson County way over east of Nashville and The City of Madison is an annexed suburb of Nashville!

[@LG1510]

this is the greatest hvac channel i ever came across i subbed asap

[@jewellhirsch1694]

Hi Mr. Curtis don’t know why you cut those wires connectors off it’s a little aggravating, but you can get them all through there if you know what I mean of course if you don’t want to fool with it, that’s another thing but just thought I would drop your line and say that it is possible get them through there and to use them the wires are not long enough then it doesn’t really matter OK, checking out Tallahassee Florida. Fred.

[@markjones7268]

Thank you for sharing, Sir. Take care!

[@gokuuchiha3204]

5:32 his face shows lol just letting hvac guy know

[@Shrampion]

😂

[@caru3257]

II really wanted to do the experiment but the chocolate bar was much more tempting.

[@woodystokes1543]

Nice work 😊

[@johncspine2787]

Wearing gloves..I always forget, I went to install a new spice rack thing with nine different shelves, I even predrilled (apparently not big enough holes though) 12 holes, the wood screws had a tough time, I was pressing the top of the screwdriver into the palm of my hand, when I got done, I had removed all the skin..that’ll take a while to heal! But at least now I can see the spices and have new room in my cabinet..

[@JohnCline]

Weren't there two set screws on that fan?

[@HVACGUY]

Yes

[@larrymixer144]

I don't see Dayton Electric motors anymore did they go out of business or did they get bought out? I used to work for one of the subsidiaries that was in the group that they were in. Seemed like good products and had everything from window fans to commercial 3 phase motors.

[@brianleeper5737]

They're owned by Grainger now, and are sold by Grainger.

[@larrymixer144]

@@brianleeper5737 thx Brian.

[@greyguy9767]

They put those bolt holes close to the crosmount to agrivate the service tech. No other reason.

[@RobertDickens2002]

I was screaming at the screen that's not the right breaker homeline, Siemens, bryant, Murray.

[@bymarkhvac64]

Does anyone in Georgia own a rake?

[@denniscarvell1828]

Would you please give details of your mini magnet light,unable to find it on web, Find your underlying philosophy interesting in relation to your work,being a good human being in a line of work which many would find too demanding Best luck Dennis ,London UK

[@HVACGUY]

That’s a Milwaukee light. Got it at Home Depot. Takes batteries

[@denniscarvell1828]

Thanks mate

[@markjohnson9964]

Good job, only fault was fan blade too far down! Perhaps motor was too deep. Had that problem a few times! Air comes out the top of the condenser coil!

[@jamesfitzsimmons381]

Good work

[@michaelwagner5037]

Where do I get the table you used to assist installing the condenser fan motor?

[@mrautoguy8419]

Great video! Can you tell me where you got that sanding drum for your impact gun? I cant find one with a 1/4" hex shank on it.

[@richardrueda7950]

At 34.50 in video I was like No No….

[@corbettknowles9942]

It's about an hour and 10 minutes 15 minutes from Albany I work for a company years ago Ashley it was a traveling Amusement Company this is based out of equipment it's in Brooks County Georgia 20 miles out of Valdosta is Lowndes County

[@bmsuter1533]

A bearing puller and an impact would have made quick work of getting that fan blade off.

[@chatrkat]

Nice complete repair. I use the base of a fork terminal I nip off to go into a clamp type terminal too. And yes I’ve left power leads off stuff then wonder “what happened?” Why it no work?? 😂

[@shift00420]

Hey Curtis who makes those quick connect wire brush cleaner?! I’m having trouble finding them

[@michaelleeper3649]

One of the most annoying parts of any job is the customer standing over you asking questions. I don't think that they realize it often slows the technician/mechanice/etc down and can increase the repair cost when an hourly rate is involved. In some cases it isn't a problem and depends on the individual doing the repairs.

[@trickorraz5740]

Sometimes friendly talks, asks, invite water bottles....

[@michaelleeper3649]

@@trickorraz5740 true

[@cardsfan-ym1bj]

🚁🚁🚁

[@jthonn]

Yes it could, get a meter like the old taxi cabs, lol, that will keep the old helicopters down.

[@kens.3729]

Absolutely Right. 😬👍

[@awshortclips]

Do you HVAC guys like it when customers hover? I hover mostly when my guy comes over but it's because a) I know him really well and enjoy talking with him, b) Though it's not my profession, I am fascinated by HVAC stuff.

[@HVACGUY]

It don’t really bother me.

[@search_eternal]

Depends on my mood. But sometime I just want to get the job done and move on.

[@cardsfan-ym1bj]

It can definitely go both ways

[@hvacmania8323]

If the technician is not experienced , you may cause him/her to skip a step . Also HVAC is a multitasking think active job and when you guys hover and talk you interfere with the thought process and make the job a lil harder , for sure .. at least offer to help if you are going to hover

[@MrMultitool]

where did You get that table? I've got to get me one. Another good job.

[@HVACGUY]

Home Depot. DeWalt work table

[@MrMultitool]

@@HVACGUY Thanks!

[@carlosguzman3136]

Idk if mine did not get the best quality control or what but it lasted me like 6 months.

[@MrMultitool]

@@carlosguzman3136 Thanks for the advice. I have seen many times where something like that would be nice for sure. Working on the ground or a tailgate is hard sometimes. I used to work on a lot of rooftop units and it would have been handy but you'd have to rope it up and in that case it might not be so great.

[@davidaustin9009]

So..as me being a brand new tech..how much was that job..cap motor, contactor and breaker? 1000 plus breaker for two hundred more..so 1200-1400 ??

[@search_eternal]

Hey was wondering how do you like that new Klein 11 in 1 impact?

[@HVACGUY]

Worth the money

[@MarioOlvera-uo3hn]

Thanh you

[@mea3335]

You made a fatal mistake, turning on that breaker having those wires hanging all over. You rush too much man .Take your time ....

[@JamesAgans]

Like Eric O says: " sometimes you've got to slow down to go fast " boy do I agree. Sometimes Curtis is like a monkey trying to screw a football.😢

[@rolytech212]

What is that helicopter doing around there😂 like another KZbinr says 🤣🤣

[@johnshield7157]

Do you ever have a sun deterioration issue with the directional wiring exposed to sun and elements? I was told always tape them to cover then tie wrap.

[@Robnord1]

Taping traps water and hides corrosion. Looks nice though. I'd use waterproof heatshrink if I was doing my own unit and had all day.

[@bobparrott8130]

Where did u get that cool work table and may I ask what's it cost... thank you

[@HVACGUY]

Home Depot. DeWalt work table, about $100

[@chrisgreen8897]

Can you tell me if the work table you are using is Dewalt? If not, what brand it is? And does it take up a lot of space in your van when folded.

[@zekemontgomery6678]

File or cutting wheel

[@luckymlg3693]

something like this how much would someone charge to do? i think something from 500 to 700

[@RobertDickens2002]

You don't go through no dang Moultrie you go to Thomasville and hit 84.

[@rokashi2104]

Great table! Where can I get one

[@darrellbarton5761]

We're did you get that work table like that

[@happybearinc.9083]

Is that a home warranty service call

[@destinylags6863]

Hey Curtis, I'm still pretty green... how did you change that breaker outside with power on????

[@HVACGUY]

Very carefully

[@HVACGUY]

Turn it off, pull it out change it, carefully put it back in, and tighten lugs, then turn it on

[@Lenir_Myst]

what is the name of that work surface .. like I need more shit on my truck.. but yea

[@brunosoares4146]

Muito top

[@lanealucy]

ATTENTION you can see the customers face at 5:33

[@BDJ64]

Helicopter customer

[@Bass.Player]

How much does a repair like this cost? More or less?

[@johns.4708]

More.

[@jthonn]

Nice job, looked like fun. I hate to be a spoil sport and it may not matter, but those open screw holes that you didn't use on the top of the fan motor, won't that let water get into that motor? Sorry, I'm an ass.

[@mufmuf97]

The motor has drain holes on top and bottom. In this case he left the plugs in the end that went up. And pulled them out of the other end to allow water to drain.

[@jthonn]

@@mufmuf97 Yes that is true, but I was referring to the mounting screw holes that he didn't use. I guess draining out is good enough. A dab of silicone in each one would do the trick, and just make me feel better if nothing else.

[@mufmuf97]

@@jthonn I leave them in, but that is what the drain holes do.

[@donnyjackson1908]

It seems like half of the Units you work on have “leesburg air”stickers. I googled and it says they are permanently closed. Terrible contractor?

[@Robnord1]

I'm a google expert. lol It's Leesburg air traffic control at the airport that's closing.

[@cardsfan-ym1bj]

Next video how to diagnose a faulty fan button 🚁 🤦‍♂️

[@smitty90100]

Mam I can't stand those kind of customers

[@joehead1294]

Really bad crack in that fan blade hub. 👎

[@mea3335]

You work little slapy

[@robertlamey7612]

Tell homeowner to go inside. I can’t stand that.

[@joeyysossa4144]

You had a Helicopter ocer you the whole time...annoying!!!!!