Ladder Cranes And Custom HVAC Tools

The video shows how I built a low-cost ladder crane and other helpful tools customized to my needs.
- Purchase your tools at www.trutechtoo...?aff=13 and use the offer code SURVIVAL to save 8% on your total purchase (exclusions may apply) -
D-TEK Stratus Detector trutechtools.c... 13 nt-Leak-Detector-and-Portable-Monitor?aff=
D-Tek 3 Leak Detector trutechtools.c...
Gas Mate Leak Detector trutechtools.c...
Inficon Recovery Machine trutechtools.c...
Inficon Comb Analyzer trutechtools.c...
Testo Comb Analyzer trutechtools.c...
Testo 557 Manifold trutechtools.c...
Testo 550 Manifold trutechtools.c...
Navac Corless Vac Pump trutechtools.c...
Navac Cordless Flar trutechtools.c...
- TOOLS I USE -
FULL TOOL LIST ON THIS PAGE - kit.co/hvacrsu...
💥 Amazon Store: www.amazon.com...
SHORT TOOL LIST BELOW
MTR Micro 6000 Rosebud Heating Tip - amzn.to/3Qpmk5s
MTT Micro 6000 Flexible Twin Tip - amzn.to/40sTu92
MTF-5 Cap'n Hook Tip - amzn.to/3SnGr6E
Uniweld 71 Welding Handle Needed For Above Tips - amzn.to/3QiNJpC
TOPDON TC003 Thermal Imaging Camera, 256x192 IR High Res amzn.to/3sWLTTn
RIDGID 31305 Model E-110 9.5" Offset Hex Jaw Pipe Wrench - amzn.to/3Bar08y
Klein Tools Ratcheting Box Wrench 1/4 x 5/16 amzn.to/3GOpBrG
KNIPEX Tools - 10" Pliers Wrench amzn.to/3U7RRJf
KNIPEX Tools - 10" Cobra Water Pump Pliers amzn.to/3Wje8Wn
Knipex Tools - Mini Pliers in Belt Pouch amzn.to/3WguyyH
KNIPEX Tools - 4" Cobra XS Water Pump Pliers amzn.to/3UaQiKA
Bahco -6" Wide Mouth Adjustable Wrench amzn.to/3sHIsMV
Bahco - 8" Big-Mouth Adjustable Wrench with Rubber Handle - amzn.to/3SPhDB7
Knipex - 9.5-Inch Ultra-High Leverage Lineman's Pliers amzn.to/3DTLJ2h
Klein Tools Diagonal Cutting Pliers with Angled Head - amzn.to/3zuBVJb
Klein Tools Stripper, Crimper Tool - amzn.to/3gQQ6Su
Klein Tools Wire Cutter and Wire Stripper - amzn.to/3Fs627W
Klein Tools Kurve Wire Cutters, Heavy Duty Wire Stripping Tool - amzn.to/3FseIuW
Klein Tools Heavy Duty Automatic Wire Stripper - amzn.to/3SQdZab
Klein Tools Crimping and Cutting Tool - amzn.to/3TPIgXU
Klein Tools Screwdriver Adjustable 4 to 8-Inch amzn.to/3Nl6KWz
IDEAL INDUSTRIES Digital Circuit Breaker Finder - amzn.to/3DoBFwm
Fluke 376FC AC/DC Clamp Meter with iFlex - amzn.to/3UaNyx2
Fluke 62 Max Industrial Infrared Thermometer - amzn.to/3SNdwWg
Fluke 902 FC HVAC True-RMS Clamp Meter - amzn.to/3Ws7OfB
Fluke 87V MAX - amzn.to/3U6Rlv9
Fluke Networks Pro3000 Tone Generator - amzn.to/3WedklG
Fluke - FLUKE-52 Dual Input Digital Thermometer amzn.to/3zwFdf1
Ideal Safe-T-Grip Fuse Puller - amzn.to/3zsw2w4
Klein Tools Canvas Zipper Bag - amzn.to/3WgnJxq
Uni-Paint PX-20 Oil-Based Paint Marker - amzn.to/3sE3R9T
5 Gallon Bucket Topper and Organizer - amzn.to/3sGi2Ll
Stabila Magnetic Pocket Level PRO with Holster - amzn.to/3FtYLo0
Clip & Carry Kydex Multitool Sheath for LEATHERMAN SURGE - amzn.to/3TPJfHA
Kydex Multitool Sheath for LEATHERMAN WAVE & WAVE + PLUS - amzn.to/3sJlhlg
Cooper Atkins Thermistor Thermometer - amzn.to/3DLeHkC
GEARWRENCH Internal/External Ratcheting Puller 7 Ton 2 or 3 Jaw - amzn.to/3FxTU5l
- CONTACT INFO -
[e-mail]
- FOLLOW ME -
Instagram - / hvacrsurvival
Facebook - / hvacrsurvival
Warning Notice Disclaimer - Video content listed on the channel HVAC*R Survival is for entertainment purposes only and not meant to be a substitute for not contacting a competent HVAC/R PROFESSIONAL. Do not attempt anything said or seen on my videos, The tasks that are shown are dangerous and deadly without proper training.
This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission. HVAC/R Survival is a participant in the Trutechtools, Amazon Services Associates Program.

[@HVACRSurvival]

Check out the newer better designed ultimate ladder crane 2020. kzbin.info/www/bejne/bHicZoVpoNepo8U

[@ggoetzinger397]

We had ladder winches that we built in our welding shop back in 1972. We used them on extension ladders to lift O6D compressors on and off roofs. 1 man could replace a semi by himself. Lately these ladder lifts/winches are illegal per OSHA regulation ladder rules. Just like the stinger one man crane we use to pull up on the roof and could lift compressors, refrigeration and AC condensing units, and exhaust fans. They were great while it lasted, again not permitted per OSHA.

[@geraldschilli8870]

I agree with you. The problem is that when someone using these homemade items has an accident, then the insurance co. & OSHA gets involved & now the people who follow safety rules & regs have extra burdens put on them. My advice, hire a crane to lift all your compressors & tools to the roof using a heavy gauge wire basket available at industrial supply warehouses.

[@brenta1905]

Awesome. Much more satisfying to roll your own rather than paying someone else if you can. I wonder how many techs watched this and said to themselves:"hey, I thought of doing that!", yet never had. Good inspiration for us all to get to doing!

[@HVACRSurvival]

Absolutely👍👍 I hope to start seeing more new custom tools on other people's videos, that would be cool.

[@fighkb]

Necessity is the mother of invention ideas my grandmother used to said, thank you for sharing yours, you are a grate person god bless you.

[@HVACRSurvival]

Your very welcome! Thank you, God has been very good to me.

[@jericosha2842]

That ladder lift is freaking genius

[@HVACRSurvival]

That's the first gen. Look at the latest gen, it blows this away

[@user-mk3np8wi8z]

Great tips. Thank you very much. I just got an idea. I will start with what you did, but I will make it interchangeable between stable winch and movable. We will see.

[@HVACRSurvival]

See the latest version.

[@timshields5308]

Thanks for the great ideas, I really like the compressor carrier, I think I'm gonna make that one.

[@HVACRSurvival]

Awesome Tim 👍🏻👍🏻That's why I made it, mission accomplished!

[@superiorcomfortheatingairl4636]

This is one of your best videos yet, great job👍

[@HVACRSurvival]

Thank you Superior! I'm glad you liked it. It's not easy knowing what to record next.

[@superiorcomfortheatingairl4636]

Just a suggestion, but do one on correct operation and set up on a H-10 Pro Leak Detector

[@HVACRSurvival]

@@superiorcomfortheatingairl4636 sounds like a good idea! Thank you sir!👍👍

[@hvacrefrigeration5204]

wow, thank you for showing this video, I will start to build one soon I really need it for my company.

[@HVACRSurvival]

Check out the newer video than this one it's a lot better design

[@kennybaker16]

hey rick its weird man. I actually miss your refrigeration videos because they were so informative BUT these new videos kick ass! They also really set you apart in the sense of nobody is doing these make your own hvac tools videos. MUch respect brother

[@HVACRSurvival]

Thanks Kenny that's a great perspective for me to try to look at.👍👍. In all reality I would prefer to do my other videos but there's no easy way to do it unless something changes. Maybe you should look into being a motivational speaker on the side? That really lifted me up thanks. 🤜🤛

[@milotorres6894]

Very innovative thinking outside the box solutions time savers help the little guys stay afloat in a competitive market..

[@HVACRSurvival]

Thanks man👍👍

[@gregz4249]

I was thinking about small versions of the crane with trolley for some of these 2hp condenser fan motors so don’t drop dam thing through a coil Also thought about a tee handle with a set screw collar to shaft so have something to hold onto or hook winch cable hook too These chiller fan motors are getting heavier I’m getting older

[@darryltaylor9916]

..good thinking....made me think, what if you used a double step ladder and put the adaptor on backwards from how you have it now, , with the boom sticking through...nice job, good video.

[@HVACRSurvival]

Thank you 👍👍

[@ramchillarege1658]

Nice. I need to rig something up to lift a furnace into the attic using a 1/4 ton harrington hoist. just don't like using the rafters.. thanks for the ideas.

[@JuanTodoli]

Great ideas Rick 👍. (I miss VERY MUCH to watch you in action on the field, you are in my Top-3 USA Techs 🙁 ). Cheers from Europe .

[@HVACRSurvival]

Thanks Jaun! I really miss making them...Anyone that is new to my channel has no idea if I know anything about the field. It sucks but I'm making the best of it . Thanks so much for you're kind words, people like you drive me to too make the videos in the first place. 👍👍👍

[@Eddy63]

Great inventions Rick ...Hope you keep doing em' ...

[@HVACRSurvival]

I'm trying, onsite videos were more convenient. 🙂👍🏻👍🏻

[@OneWildTurkey]

That recovery coil could have dual purposes. After the job's done, back at the ranch, it makes a great instant adult beverage cooler.

[@HVACRSurvival]

Dual purpose under cover parts🤣👍👍

[@joshpearson1693]

I am going to make the ladder winch. Thanks for the video.

[@HVACRSurvival]

You bet! Email me pics when your finished with it. 👍👍

[@dankerr2973]

I am going to have to makes these. Good idea.

[@HVACRSurvival]

Thanks Dan! That's what I was hoping for 👍👍. I watched a crap load of videos to get some of these ideas. If you improve the design or just want to show off your project, please post something on my Facebook page 🙂.

[@berylwhite2983]

Love the cranes very creative... you can also use it for your 13 year old boy when he discovers girls hook it thur their belt loop keep them in sight at all times until you're ready send them to school with a Tracker collar no all joking aside you made some really great projects great job 👍

[@HVACRSurvival]

Check out the newest version that I posted a while back, that thing is twice as nice as this one. Thanks for the feedback!

[@Farpointhold]

Great info not in HVAC but like that ladder attachment. Raleigh can sure use someone with your attitude down this way.

[@HVACRSurvival]

Thank you for your kind words. I try to do my best no matter what I'm doing. Doesn't matter if it's Videos, HVAC, or hanging a picture 😲

[@chillagorilla]

Would love to see some videos of these in action or how to make them!

[@HVACRSurvival]

I have a new crane I made. I'm gonna record using it once I get a chance.

[@vnesmuonnam]

love it. Thank you for sharing. It is great idea. I will try to make one.

[@NorCal-refrigeration]

Nice ladder crane. And sweat pants too 👍👍

[@HVACRSurvival]

Thanks Dave! I was at the gym earlier. 😂👍👍 I'm eventually going to do a video how I went from 255lbs to 176lbs that I'm at now.

[@NorCal-refrigeration]

N.W. Ohio HVAC Videos that will be awesome 👏

[@crforfreedom7407]

Been wondering how I was going to get stuff topside as an older newbie without breaking my back! Have looked at the ladder hoists, but the COST!! This is the PERFECT solution. That will be in my truck! LOL!! Harbor Freight saves the day again! I don't have any of the scrap metal, but I know my steel supplier sells theirs for .06 a pound so... Nice MIGn there brother! Those joints should give you a lot of trouble-free service. I may run mine to Lima Powder if I think it's good enough. That should make it last.

[@HVACRSurvival]

Thanks, my dad was a welder at General Dynamics and tought me. I don't do it everyday so it usually takes me a few inches to get my groove back. You could either go to Allen County Fab or Century in Van Wert for metal. That green metal that it's made out of won't rust anytime soon. I only painted it black to make it look nicer. You still haven't told me who you are?

[@crforfreedom7407]

@@HVACRSurvival My name's Curt. I live in Findlay. I'll message you sometime on facebook and fill you in on the rest, don't want to give my full name on YT. Finishing up 1st week in may, taking my EPA in 3 weeks, wish me luck getting my universal on the first try! Don't want to go broke one part at a time!!

[@cruzrobledo6631]

Wow Thank you ! like how is not too big and strong enough to handle a good amount of weight

[@HVACRSurvival]

My newest version works great for a lot of different things. I pulled the burner off of a commercial boiler this week using the trolley setup.

[@atch_n_sons]

Love the hook for self roping your crap off the roof 👍

[@HVACRSurvival]

It really works great! Thanks 4 watching👍👍

[@milotorres6894]

Definitely saves legs when by yourself on the job use the same concept on rough ins with big fittings or nesting a bunch together taps wyes and ells tapers I've seen two ladders used as lift for a 3 ton package unit kind of sketchy but they got it up in one pc for a single story only good idea no crane fee waiting great time saver cost savings passed to customers nominal fee for service.

[@McDIY]

Excellent ideas. Thank you

[@Mike-yh8tv]

I used to enjoy and learn from your service tech videos. Keep them coming hope thanks for your giving!

[@HVACRSurvival]

Thanks Mike, that means a lot! I wish I was able to do my videos like I was, it was a lot easier and more rewarding but I'm in a difficult position. Keep watching, they should speed up as it gets warmer. Yesterday was 50* out and that made it much easier. 👍🏻👍🏻

[@willphillips6024]

simple to the point the way i like things.. goood job!!! awesome

[@HVACRSurvival]

Thanks Will, I'm really glad you liked it!👍👍. I try to cut as much unneeded dead spots in the video as possible. ( I hate videos that drag out 😩 . )

[@RJMaker]

I love this video. Awesome Idea's and Makes. Right up my alley..

[@HVACRSurvival]

Glad you liked it! It makes all the work worth it! Thanks 4 watching!!

[@justinmedeiros5361]

Nice tools to get on the RUFF! 🐶

[@HVACRSurvival]

Watch more videos and see what other words I create 😂🙂

[@gregz4249]

Thanks, I have made similar tools

[@HVACRSurvival]

Check out my newest version of this down in the link below. It's a lot better than this one.

[@Trickp01]

Awesome ideas and once again, great video😊

[@HVACRSurvival]

Thank you, I appreciate you taking the time to watch and comment👍👍

[@Gcanno]

Great ideas, and explanation, You should look into teaching at a local community College, college or trade School. Keep up the good work.

[@HVACRSurvival]

Maybe some day I might look into that when I get older. Thanks for watching!

[@philltafolla]

Good Stuff N. W Ohio . Digging that Ladder adapter .

[@HVACRSurvival]

Thanks for checking it out!

[@lee-johnson]

Cool ideas. I’m curious about thus ladder crane raising a small condenser. Looks like I would have to lean way out to get the drill on. I wonder if the drill point could be facing the operator?

[@HVACRSurvival]

There's a few videos on KZbin that has one just about like it but it's a little heavier Duty. One major thing to consider is make sure you're wearing your PPE and harness when you're doing this because you could get an OSHA violation. Also there's a possibility that because the ladder is not being used by manufacture specs that OSHA could also site you as a violation. ***As always use at your own risk and verify these things before attempting this. *** Thanks 4 watching!

[@HVACRSurvival]

You could mount it how you prefer and use a pulley to make the angle down. I haven't verified the max capacity yet but I think It could handle 300lbs . If You reinforce the 45 degree axle with a 45 degree brace it could do alot more.

[@outcast7899]

Really wanted to pay more attention but some of that spinning around made me dizzy so I just set it to the side and listened and just glanced it. It was like watching a roller coaster on tv but it sounded like some good ideas. Sorry, I'll try harder next time and I did L&S

[@HVACRSurvival]

Just throwing this out there, Don't try to move your eyes to see what object I'm panning to next, let my camera move to the object for you. That's probably why it's such a problem. I can't set up a tripod and frame every shot, I'm lucky I can even record these, most employers won't let you.

[@universalservicetechust3578]

Great vid 👍🏼

[@gregob-team4642]

Awesome video thanks

[@whitesheatingairappliancer7101]

Great video thank you

[@joevinski1]

Fantastic video brother !!!! Love the ideas definitely gonna build that ladder crane ive been wanting one forever but could never justify spending that much lol do you have anywhere with plans ? Like the spacing of where to weld the brackets or the overall length of the different pieces ? Thank you again for making such great videos!!!!!

[@HVACRSurvival]

Message me trough Facebook and I'll measure it out for you. * I'm not going to say it's perfect, but it works good for my two ladders. It was mainly clamps and trial and error at first. Thanks for watching👍👍

[@thomasdupont1931]

Where did you buy the trolley system

[@jimgill5706]

s Brilliant. Where did you find that very short blue 1/4 inch flare hose?

[@gregwitkamp5583]

Just some advice from a retired contractor, I was like you making my own hardware. Don’t let OSHA see you using any of this. You will fined out buying the manufacture product was cheap compared to the fine. I also worked as Safety Director for a Excavating Co. My suggestion is for you to get up to speed on OSHA. If you would like to get more info please feel free to contact me.

[@HVACRSurvival]

I appreciate what you're saying, I know that I need to wear a harness and all the other PPE that goes along with that, which I have. I also have my 10-hour card which is usually plenty for what I do. (I've had several people ask me to build this and I have rejected all offers because I know the legal liabilities that would go along with it.) It reminds me of the question I asked during safety class "how do you make a secured, approved rigging point as the first person on the roof when you can't be secured when you're making the secured connection." It's like the chicken and the egg, which one came first? They couldn't quite answer it in a way that didn't show that at one point you're going to be unsafe until you install the anchor.

[@mcroley591]

OSHA sucks.

[@lyndonlakhansingh]

Could you send a link for the harbor freight lift?

[@HVACRSurvival]

That’s just the worm drive. I rebuilt this with an electric winch.

[@u2ooberboober]

Good tools!

[@HVACRSurvival]

Thank you, check out the newest version of this. It's even better yet

[@victorvillafane252]

Good idea thank you sir

[@HVACRSurvival]

Waite till you see the redesigned one.

[@fernandomurillo9272]

Awesome something to think 🤔 about going to try to make one

[@HVACRSurvival]

Check out the second video I made, that crane blows this one away.

[@Strictly4Defense]

i just simply use channel locks to get the compressor out.

[@vnesmuonnam]

Love it

[@thomasdupont1931]

Where did you buy the trolley rollers

[@HVACRSurvival]

Amazon

[@wannabeelektwicityman268]

Love the crane. Any way to put another drive nut on the other end of the worm drive so you could operate it from underneath and on top?

[@HVACRSurvival]

You probably could if you drilled out the metal and welded onto the worm drive. I had some problems needing more power from my drill so I redesigned it with a electric winch, it works allot better now and it works in more applications. Check out the video for that one.

[@wannabeelektwicityman268]

@@HVACRSurvival Thanks. I just watched the video. Major upgrade! I'm sorry I commented before watching your improved version. We appreciate you sharing your ingenuity. Strain the brain, not the back.

[@fayazali6538]

Nice video Bhai 👍

[@HVACRSurvival]

Thanks Faytaz👍👍

[@becumfreeky]

Do you use 2 ropes one connected to each washer loop on that hook?

[@HVACRSurvival]

I use one long rope and have hooks on both ends. Then I hook onto those washers. 👍👍

[@joeyysossa4144]

Would it beable to lift a 2 ton minisplit condenser unit???

[@HVACRSurvival]

I don't see why it wouldn't. That's not what I designed it for but the electric winch version that I made is capable of 1500 lb. You have to remember the weight limit of your ladder is usually only 300lbs if you're lucky, not to mention if OSHA was watching you might get a fine.

[@hungduong07able]

Where can i buy the trolley

[@HVACRSurvival]

I found it on ebay

[@bobclark3585]

Hey, whats that tool with the circular copper tubing ?

[@HVACRSurvival]

Thermal transformer. Basically it cools the refrigerant to allow a quicker recovery

[@HVACRSurvival]

Thermal transformer. Basically it cools the refrigerant to allow a quicker recovery

[@MrRdb916]

Nice video...Just curious on how you get the load off when on a roof hatch? Do you have a cut sheet on how you made your winch?

[@HVACRSurvival]

I wouldn't try anything much bigger than a hermetic compressor if I was going up the roof hatch, the only time I used it was for a 5 ton rtu compressor and I used the strait ladder. If I wanted to pull a real big compressor up the hatch way, I would rather use the second uni-strut crane I showed because you can slide the load left or right. Far as constitution, I pieced the ladder crane together piece by piece, I didn't have any layout planes. I can measure it out for you if you like, just contact me through Facebook.

[@ricmadthesilverslayer9281]

Take this to the shark tank show lol

[@HVACRSurvival]

I wish, it's just a collaboration of different ideas I have seen.

[@salvadorgutierrez4474]

What happened to "hitchlift"

[@HVACRSurvival]

This was the first crane I made, watch the ultimate crane to see the one that does everything.

[@ricmadthesilverslayer9281]

Genius

[@HVACRSurvival]

Lol. Just reusing and modifying someone's idea. I redesigned this to a 120v motor and now it breaks down into smaller pieces and can do more tasks. I need to reshoot the video. Subscribe so you'll get the notifier when I release it.

[@johnsoh8616]

Can you tell me where or how to get 'trolly system'? I can find or search over internet.

[@HVACRSurvival]

If you are referring to the uni-strut trolly system I showed at the end? I have a link to the trolly here. amzn.to/35OstQE

[@johnsoh8616]

HVAC*R Survival Thanks 👍👍👍

[@HVACRSurvival]

@@johnsoh8616 your welcome 👍🏻

[@danny281983kkjj]

thank you brother, help a lot

[@HVACRSurvival]

🙏✌️👍👍

[@alexgonzalezelias5913]

Where you get the L metel that goes to the step ladder sir. Thanks.

[@HVACRSurvival]

That was L channel that I cut and welded together. Check out the newest video called the ultimate ladder crane. I stopped using this bracket and made one that does 5 types of lifting.

[@mrcrux213]

Awesome 👏 👌🏼🍺

[@HVACRSurvival]

I appreciate the view and feedback 🤜🤛👍👍

[@HVACRSurvival]

Check out the newest crane video, it's a lot better now.

[@stephwaylonwells3218]

👍

[@La2venida]

Do you have the link for winch

[@HVACRSurvival]

Harbor freight has this one and the new winch I currently use.

[@La2venida]

I plan on using it for raising tanks , pu.p and recovery. I did not find it at local harbor freight

[@HVACRSurvival]

Go online and the part number should be there

[@ohmikeodd]

"Its not going nowhere" does that mean its going somewhere?

[@HVACRSurvival]

Maybe 🤷🏻‍♂️🤣

[@henrybusjahn8714]

i like

[@HVACRSurvival]

Check out the new one I built, I think you'll like it even more. I sure do 😎👍👍kzbin.info/www/bejne/bHicZoVpoNepo8U

[@rogeriobastosbastos5942]

Show

[@HVACRSurvival]

Aha aha

[@sergiomontoya7929]

U smart smart man lol

[@HVACRSurvival]

Thanks, but I'm just a tech that likes to share things.

[@mikev.1034]

👍👍👍

[@HVACRSurvival]

Thanks Mike 👍👍

[@tmaxson6505]

Good ideas but the videos need less commentary. You repeat yourself constantly

[@kolsen6330]

Something to remember. These are fine to use at home, but when taken onto a job site that is covered by state or OSHA regs, like hoisting an air con unit onto a paying customers roof, you are using a lifting device that has no engineering behind it, isnt rated or tested for max safe load and isnt inspected for safety by any regulatory agency. The liability is all on you for any damage or injury. 2 6:03 Uni strut or whatever you call it is for hanging pipe or electrical conduits, not as structural members in hoisting applications. This little monorail hoist is scary. Buy a load rated and engineered one from Harbor Freight. 3 A homemade hook???? You gotta be kidding me. Accident looking for a place to happen. I realize you are only lifting to rooftops, and probably under 500 pounds, but even ten pounds, dropping from 20 feet can kill you. 4 In this day and age of law suit hungry idiots, if someone makes a ladder hoist as you recommend in the video, and gets hurt, He can sue the crap out of you. I am a retired crane and hoist inspector and journeyman Boilermaker fitter welder.

[@HVACRSurvival]

Do you think maybe that's why I have not made these and sold them? I have friends in the legal system and that's the reason why I put in my videos that they're all for entertainment only and not instructional videos. Also I've never recommended lifting a whole air conditioner on a roof that is totally stupid. There are actual manufacturers of these that are using them to lift whole units onto the roof. Somehow he got it OSHA approved and it's on my video where I went down to ahr 2022 and I talked to the guy and did an interview with him. I fully understand what you're saying and I agree that's the reason why I haven't done anything more with it than use it for my own personal use.

[@abdulmatheen106]

Good video thank you

[@clintglasgow5633]

👍