Going all-in. First finding a very difficult leak, then fighting against leak after leak, after leak... Disassembling not pleasing blocks of old coils. Till the end of the day. Man, this is one of the BEST videos figthing leaks I've seen so far. Congrats Rick, GOOD JOB 👏My respects.
@HVACRSurvival Жыл бұрын
Thanks so much for the kind words, it was a long day
@JuanTodoli Жыл бұрын
@@HVACRSurvival I know it.
@Olc... Жыл бұрын
@HVACR Survival, why not replace those coils? The next day, it will leak from the other side
@HVACRSurvival Жыл бұрын
@@Olc... my best guess would be cost and availability, they are likely 30+yrs old.
@SeanMackBuffaloStyle Жыл бұрын
Just one of those calls where you feel defeated even though you got to the finish line. Refrigeration adversity at it's finest. Good job man.
@HVACRSurvival Жыл бұрын
Thanks Sean! 🤜🤛👍👍
@dioncurtiscurtis31883 ай бұрын
That’s crazy that’s one of my biggiest turn offs so far. Doing everything I think it might be, but not getting the results. I’ma year 1.5 in. Fresh meat. Im constantly being told it’s part of the job. But eventually I’ll get better. Boy I hope so theirs something about refrigeration that is so attrative 😂
@mansourramzey7711 Жыл бұрын
Wow , that was a great find, 100 lb. Of ferrion!!!?? It probably cost 10k for ferrion, and at least 5k labor, i enjoyed watching your expertise and techniques of fixing things. ✌
@HVACRSurvival Жыл бұрын
Thank you!
@throttlebottle5906 Жыл бұрын
time for a new sensor on ole ticky. bad/contaminated sensor/bad wiring = bad sensing. all the newer stuff is far worse, mush of them you bump the head slightly and the detection sensitivity can change by 90+% and be miles off. we're back to needing proper testing and maintenance of test equipment, everyone takes it for granted now.
@HVACRSurvival Жыл бұрын
I'm waiting on my test vial for the stratus, I used the calibration gas on the H10, that sensor has less than a few hours of use on it and it's never been hit with a hard hit of gas.
@richseahag4980 Жыл бұрын
Thirty years ago there was a full time refrigeration mechanic working for the supermarket. Then it was cheaper to lay them off and fix on fail . Now it’s don’t replace the unit -we spent the set aside money.
@jaymartin50954 ай бұрын
What you know, your tenacity, and your practical skills leave one nearly speechless. But i had to try and write something. Then on top of it all, including the exhaustion, you edit and post a video so we can all learn. Hats off to you.
@HVACRSurvival4 ай бұрын
Thank you very much Jay! Yes, there’s a lot of time spent and editing phase. People on average don’t watch more than 50 to 60% of a video no matter how long it is.
@markandsuriyonphanasonkath876829 күн бұрын
NICE work on a system that is WAY PAST its serviceable life! Best regards from an Expat in Phuket!
@HVACRSurvival28 күн бұрын
Many thanks!
@Jonnybravodude6 ай бұрын
I like how thorough you are and dedicated to creating a master piece with every repair. We need more guys like you in the field who sign their names to each job and stand by their work. Nicely done!
@HVACRSurvival6 ай бұрын
I try my best even when I don’t want to. Thanks brother for noticing!
@BridgeWater94 Жыл бұрын
Damn this was a remarkable job. I’m new HVAC newbie here and seeing all this is amazing. Wish I had someone like you to apprentice under so I could learn all I can. Doing trial by fire on my own as of now. Learning all I can when I’m home too.
@HVACRSurvival Жыл бұрын
I am learning these racks as well, that's why I know what to explain in more detail, because I might have just figured it out minutes prior 😲😁😁
@tbelding Жыл бұрын
All I can say is to watch the KZbin videos. You want the ones like this one, and HVACR Videos (Chris), because they'll leave in the mistakes as well as the 'This is how it's done".
@natepeterson7145 Жыл бұрын
Omg every time I watch a rack repair I get reminded why I'll never do rack systems. Fix one leak then you find another. How long did the repair take? Good video!
@HVACRSurvival Жыл бұрын
All day to fully complete
@patriknilsson2175 Жыл бұрын
As a hvacr tech in Sweden, the closest to the unit you worked at, we had the kryotherm, it was a complete unit with several independent circuits, heat reclaim/ventilation, whole unit was placed indoors. This multiple circuit with common suction and liquid distributor you worked at can partly be compared to the modern co2 system, but there's a modern computerized management, two suction lines (one low and one med. temp) and one liquid line going all over the store to the cold storages and display counters. Anyway. That was a well done repair! 👍
@HVACRSurvival Жыл бұрын
It's always awesome to hear from my overseas viewers🙌. This was one of the oldest control systems this grocery has have left, it's getting replaced hopefully this year with a new Emerson controller.
@BrannndonM3 ай бұрын
Head up mate you did an amazing job given your circumstances
@HVACRSurvival3 ай бұрын
Thanks brother’
@coldfinger459sub0 Жыл бұрын
Got to love the Stratus. My old H 10 that I was so proud of her for the last 40+ years is feeling abandonment issues and neglect.. she was left for a younger thinner sexier model.
@HVACRSurvival Жыл бұрын
That happens to the best of them🙂👍👍
@stephennichols481510 ай бұрын
Anybody remember what a halide torch is that's what we used to find leaks in grocery stores back a long long long time ago before the H 10 and other electronic detectors and cordless tools. Installed and serviced all the major grocery store chains. Loved getting them after hours emergency service calls on new store's that other companies installed and started ending up chasing moisture in system and dirty T XV inlet screen s,leaks and oil pressure switch tripping due to the quality of work or knowledge of how the rack systems worked. Loved doing air-conditioning and refrigeration for 40 years and seeing all the different types of systems and technology and I enjoy the videos and appreciate and respect you for the dedication and knowledge that is needed to do commercial refrigeration and you have to be on call and go whenever they call most have a 2 hour response time and technician on call always had a backup tech for the busy times in extreme temperatures and the backup tech even had a backup tech you have to be able and willing to work long hours and always be ready to go
@ericmodernel9205 Жыл бұрын
Finding Leaks Sucks been doing this over 30 years .. Nasty jobs Great video people have no clue the work we do. I see you cut your finger. True today the units junk. Good job buddy
@HVACRSurvival Жыл бұрын
Thanks Eric, yep, I got a slight cut on the finger, I didn't notice till the blood was seen, I barely feel it anymore. Thanks brother🤜🤛
@benkeysor7576 Жыл бұрын
That is a very old store and even older building so I'm not surprised they had refrigeration issues especially since they only like to do the very minimum repairs. I also wouldn't be surprised if some of that equipment has been there longer than the store has.
@HVACRSurvival Жыл бұрын
Yeah when they get new stuff it's usually something old from another store 🤣
@hvacslayer2929 Жыл бұрын
Looks like I need to pick up a stratus have seen too much good from it! Now I’m going to start practicing with that torch tip, I got the fork tip in a little combo kit just always had it laying in the bag never messed around with it. 🤘🏻
@HVACRSurvival Жыл бұрын
Awesome
@andrewgoodman4209 Жыл бұрын
Excellent job man! As a supermarket tech I love seeing these supermarket calls you got. Especially that old rack with the gang clocks in it 😂
@HVACRSurvival Жыл бұрын
Thanks Andrew, much appreciated 👍👍
@DrHakennase6 ай бұрын
Damn thats a nice torch both sides ^^
@jasonjohnsonHVAC Жыл бұрын
Stratus for the win. I still greatly appreciate you taking the time to chat with me when i was asking for your opinion on leak detectors. Based on your input i bought the Stratus and you were 100% correct.....it is the top of the heap and its already paid for itself with leak detection.
@HVACRSurvival Жыл бұрын
Awesome, we charge $5 for every leak search that we do in addition to the hourly rate.
@MariosACandRefrigeration Жыл бұрын
soap bubbles for the win.
@stacihess9378 Жыл бұрын
Fixed up a few of those older ones but have replaced many newer case coils. The new stuff is so thin it just can't hold up. Sad really. The new coils in the deli cases can barely make it 5 years. Nice work and enjoy your videos.
@HVACRSurvival Жыл бұрын
Thanks for the feedback! I appreciate the views🤜🤛👍👍
@wonderhomie2011 Жыл бұрын
Nice! You sounded beat up there at the end.
@HVACRSurvival Жыл бұрын
I was. I was about finished at 400 left at 600
@MrJujubean9 ай бұрын
That was some repair! Wow!
@HVACRSurvival9 ай бұрын
🙏🤜🤛👍👍
@veil67 Жыл бұрын
i really respect the way you went all-in with that major leak , you did everything to make it run again and took the time to re-check and found more leaks and repair them ! Great job 😃
@HVACRSurvival Жыл бұрын
Thank you!, I was dragging butt but by end. 😩
@top-notchcontracting2248 Жыл бұрын
You are a true pro champ! Without a doubt some of the best trouble shooting I have watched... I appreciate the effort you put into making the video aswell I know it was difficult to do the job at hand on top of filming. Thanks I would be interested in a longer version as well.. thanks again
@nebraskaman82475 ай бұрын
I don’t think the blue monster bubbles freeze near as easily as the brand you’re using. The blue monster also doesn’t foam all up when you spray it. Just started using this a couple of months ago, and seems like a superior product.
@renj6531 Жыл бұрын
10:17 judging by the noise coming from that door which is very obvious they dont have it maintained and considering lubricating a door is simple and relatively inexpensive comparied to refrigeration work. This place probably dosnt do routine maint but only calls when the SHTF.
@HVACRSurvival Жыл бұрын
You would be correcting your assessment.
@EverythingHVACR Жыл бұрын
Hell yeah! The Stratus is Killin it. Great job Rick
@sherwinalvarez7365 Жыл бұрын
👏🏾👏🏾👏🏾👏🏾👏🏾 Rick, just when I think you're licked.... you come deep in just vast toold bag of knowledge and show them who's boss. That tip is amazing. Oxy is the way to go. Man i really enjoyed this video. Thanx for sharing. Oh and editing, where the magic happens, is spot on. Go home and tell your lady. Maybe you get one of them sammiches again.😂
@HVACRSurvival Жыл бұрын
😂😂😂👍👍👍 thank you sir!
@Freezier134a Жыл бұрын
Love my stratus! Best leak detector I’ve ever owned, and that includes the ancient h10. I sure like that little tip you have , I’ve been turbo torch my whole career, that’s all Any one uses here. 😊
@user-im6ks3wp8o4 ай бұрын
That H10 will run circles around that other leak detector. Try changing your sensor on the H10
@HVACRSurvival4 ай бұрын
I changed the sensor every year and never pegged it with strong hits. It’s just not as fast and the battery doesn’t lasts as long as my stratus. Sure it’s better at R22 by a little bit but that’s not worth it
@REFRIGERATIONKITCHENEQTECH Жыл бұрын
“Mouth breather of the group” 🤦♂️. As always, great and hilarious content!
@matthewclemons1574 Жыл бұрын
Rick those pre made flares are handy, I love how thick the seat is on them. Good work
@markcarpenter3600 Жыл бұрын
I have been using a large wooden handle wire brush, but that dog brush looks like it is much better. Thanks
@BuilderJay Жыл бұрын
I used to work in the grocery store, and did take care of the basic stuff on the racks. But man.. the cases are dirty! That wouldn't fly at our store when i worked there.
@HVACRSurvival Жыл бұрын
It's in need of a remodel.
@brenta1905 Жыл бұрын
Great job Rick, you were firing on all cylinders on this one. Clear to see, a veteran in Big-fridge stuff!
@HVACRSurvival Жыл бұрын
🙏🤜🤛👍👍
@Sctronic209 Жыл бұрын
Excellent job Rick.
@curioushvacguy6876 Жыл бұрын
I actually shut off tiktok to watch your videos Rick- very much awesome bueno
@HVACRSurvival Жыл бұрын
🥰🤜🤛👍👍🤣
@tphvac87 Жыл бұрын
This stuff is huge that you work on man I wouldn’t know where to begin, I work residential HVAC! Kudos man!
@HVACRSurvival Жыл бұрын
Thanks for checking it out!
@johnwalker890 Жыл бұрын
Great job Rick, I think your torch tips are great. You saved the day again.
@harrydickson4575 Жыл бұрын
Excellent work and video 👍👍👍
@jericosha2842 Жыл бұрын
Dang I might have to get a Stratus. I do have the Accutrak however, and I try to use it frequently to no avail. It definitely works, but with small residential leaks in evap coils I have a really hard time hearing leaks. I tend to only find larger leaks with it, which is still very useful. EDIT: Dude, you must be one of the few techs out there that will actually repair stuff like this on that scale. Most companies won't even allow you the time to do that and will just tell them to quote a new coil or what have you. Being that diligent and thorough is kind of a curse, because you get all the shitty jobs. Keep your head up, you make a big impact.
@HVACRSurvival Жыл бұрын
Thanks man! Where are you going to get a coil thats 30 plus years old? Even if you did it will be weeks or months before it comes.
@richlikeg3722 Жыл бұрын
You are the first person I see using that brazing tip good 👍
@HVACRSurvival Жыл бұрын
I was a little afraid it might get too hot but it was controllable.
@per995 Жыл бұрын
You made it again😊Not the most pleasurable to work on such cabinets. Over the years I always had some oil on the flares to make the surfaces to grip better. Seems like the stress on them was avoided and the tension got better. As a young guy, I made many flares on brake tubes that alway was made as double. The flare thickness was more solid and better working than on refrigeration systems.
@HVACRSurvival Жыл бұрын
I used the nylog on the flare, that's the same as refrigeration oil. I'll be replacing the flare the next time I run into this.
@RoaddogRoaddog Жыл бұрын
True HVACR survival. U are the man.
@805HVACR Жыл бұрын
Well executed Rick. I saw the frustration lol believe me I’ve had plenty like it too.
@BrettWae Жыл бұрын
Well done Rick! Thanks for putting in the time and effort in making this video.
@HVACRSurvival Жыл бұрын
Thanks for watching them👍👍
@dougking7592 Жыл бұрын
Well done brother , I wish the evap coils was that thick now, the new coils are will not stay as long as this one great job 👊🏻
@HVACRSurvival Жыл бұрын
Thanks Doug🤜🤛👍👍
@sterlingarcher46 Жыл бұрын
Heck of a good job Rick 👍. The Inficon people couldn't do a better promotion ! That Stratus i really wish I could get it , but it's too expensive for little ol' me .
@jrodamos Жыл бұрын
Great vid man. I would have stopped recording half way thru the job. What a shit spot of a leak tho 😂
@HVACRSurvival Жыл бұрын
There are times I stop because it's a shit show I don't want to remember 😂👍👍
@joehead1294 Жыл бұрын
That's the kinda job that separates the men from the boys. Cool torch tips.👍👍
@HardKnocks101 Жыл бұрын
Great job Rick!
@oscalerup1129 Жыл бұрын
Always interesting to see and learn on different systems I don’t normally see. 👍
@restaurantrepairs Жыл бұрын
Never been introduced to supermarket setup. Thanks for the intro and education. Great Job
@HVACRSurvival Жыл бұрын
I really enjoy learning the racks and controls because it's more limited to how many people get to work on them.
@restaurantrepairs Жыл бұрын
@@HVACRSurvival completely understand that. Same with the soft serve game. 1000 Hvac techs, 200 refrigeration techs, 3 soft serve techs. Specialties for the win
@livingyourbestlife71111 ай бұрын
excellent!
@MariosACandRefrigeration Жыл бұрын
I still use teflon tape and leaklock for those old flares.great work.not a fan of nylog
@derrickenbuenosaires Жыл бұрын
I'm surprised you did this on your own. The company you work for must be thrilled having you on the payroll lol That's a 1 journeyman job and apprentice on the side for help
@HVACRSurvival Жыл бұрын
🤣👍👍 Generally service doesn't get a lot of Tommy two pockets just to stand around. But if I wanted someone I could have scheduled a helper but I'm not big on helpers unless they're learning.
@MariosACandRefrigeration Жыл бұрын
@@HVACRSurvival You will last longer in this business with a helper.
@IAmSidTheRealKid Жыл бұрын
Fantastic job Rick!
@ronchambers9762 Жыл бұрын
That was another tough one Mr. Rick. Needle in a hay stack kind of stuff. Great Job. Thanks for taking the time to pass it on. I hope your day is healthy and happy..😊
@HVACRSurvival Жыл бұрын
Today is more restful as long as I don't get called out. Today is my last day on call this week🙂👍👍
@brianmillion-osborne6747 Жыл бұрын
love all your videos. The rack videos are my fav. thanks keep it up rick!
@jaysongoff Жыл бұрын
Nice work and endurance, Rick. When you mentioned you were having trouble on a low-temp circuit on another rack, my first thought was maybe it had mechanical sub-cooling that was being fed from the rack you had the leak on. Just a thought. Keep up the good work vids....👏
@HVACRSurvival Жыл бұрын
I'm not sure why I had problems on the low temp rack that day, I didn't do anything to it and it started working and has been for two weeks now🤷🤦🏻😂😂. Thanks for the support! 🤜🤛👍👍
@stevencossaboon3237 Жыл бұрын
Great job Rick.
@brandon511810 ай бұрын
You can have the supermarket refrigeration repairs. I'll stick to refrigeration repairs at Wendys. Way easier, but still stressful at times. 😂
@HVACRSurvival10 ай бұрын
😂😂 Wendy's is horrible, it's right there with Arby's. Both have greasy, nasty equipment, more so than most. Not too mention they are working over top of you dropping stuff 😂
@brandon511810 ай бұрын
@HVACRSurvival Yes, Wendys is very very greasy!! I do hot and cold equipment and that grease destroys everything! I refuse to work on some stuff because it's full of grease and a potential fire hazard. The employees working on top on you is so true too, because the kitchens are so small. That's why I hate doing inside work during lunch hours, like hot equipment or reach in coolers because they be in the way, especially the bigger people. 😂
@zgrif Жыл бұрын
Man I got into the trade 2 years ago, work in light refrigeration the biggest systems we install and service are those RDT systems. This is like a whole other trade lol. How do you even get into racks like this?
@HVACRSurvival Жыл бұрын
I'm learning as I go, asking questions, researching other KZbinrs that do it everyday and looking at my book refrigeration for AC technicians. I've been doing this since 1995 helps
@MariosACandRefrigeration Жыл бұрын
Great work Rick,those new teflon washers work great,they're coming out on the new units,love that leak detector whats the brand of the soap bubbles LOL.
@Brisket9392 Жыл бұрын
Big Blu by Refrigeration Technologies. They also make a subzero version which is useful for freezers and it won't turn to slush in your van in the winter.
@thesilentonevictor Жыл бұрын
Nice work Rick
@Rock201017 Жыл бұрын
This episode is really good. I really enjoy it
@HVACRSurvival Жыл бұрын
Thank you, I spent all day yesterday trying to condense it to what you seen today, it was over 2 and 1/2 hours and actually took me a total of probably 11 hours to do the job
@kennleeds4342 Жыл бұрын
@@HVACRSurvival
@mercjay Жыл бұрын
Always a good watch! Great job as always 😊
@Victor-nn2wi Жыл бұрын
Great fix
@SupermarketRefrigeration Жыл бұрын
Nice job pal. Quality work as always
@HVACRSurvival Жыл бұрын
🤜🤛👍👍
@motooz2088 Жыл бұрын
That looked like a challenging job nicely done!
@HVACRSurvival Жыл бұрын
It was👍👍
@shifter8207 Жыл бұрын
Great video Rick thanks!
@chrism6874 Жыл бұрын
Awesome skills Rick!! Appreciate you making these video's
@bryanharayda1975 Жыл бұрын
Good find and great repair! You definitely do a thorough job! I got turned on to the Nu Calgon fluorescent leak detector because it’s freezing point is 2°, Big Blue is 27°, I work in a lot of freezers so I definitely like the lower freezing point lol. Also, I really like how you use different tips for different applications, I need to get the one you used to braze the distributor tubes and elbows, nice work!
@HVACRSurvival Жыл бұрын
I linked it in the description area. They have a whole set of tiny tips and the rosebud.
@jasonjohnsonHVAC Жыл бұрын
There is a Big Blu sub zero as well. Rated for really low temps
@bryanharayda1975 Жыл бұрын
@@jasonjohnsonHVAC thanks for the heads up! I didn’t know that!
@bryanharayda1975 Жыл бұрын
@@HVACRSurvival yeah, I’ve see all kinds of tips on Amazon and true tech, I just picked up a Cap’n Hook that does up to 3” copper, sucker eats some gas though lol
@Eddy63 Жыл бұрын
Great little job and vid ... Thx for posting ...
@throttlebottle5906 Жыл бұрын
the refrigerant levels sensors are likely contaminated and very wrong reading/skewed miles off. or controller even reading wrong. probably best to make sure nothing is in defrost and everything on that system "warm boxes", then fill it by sight glass/receiver level and pray. 🤣
@EverythingisFire8 ай бұрын
You're the man!
@HVACRSurvival8 ай бұрын
Your too kind🙏
@timr4362 Жыл бұрын
Kinda reminds me of the HEB in Waxahachie
@eastcoast186 Жыл бұрын
Fantastic and informative video and the fenix PD35 flash light is a fantastic that you recommended don’t leave home without it EDC
@HVACRSurvival Жыл бұрын
I love it too! They have so many neat lights. 👍👍
@eastcoast186 Жыл бұрын
@@HVACRSurvival thanks for the great videos and knowledge
@StarGuardian8180 Жыл бұрын
Back to the H10
@HVACRSurvival Жыл бұрын
🤣🤦🏻
@Georges3DPrinters Жыл бұрын
Great video! Showing me some stuff and I appreciate it.
@HVACRSurvival Жыл бұрын
I'm glad to hear it's helping 🤜🤛👍👍
@zekenzy6486 Жыл бұрын
Great Video. Thank you for sharing
@eduardo123exb Жыл бұрын
Nice work!
@potentialhvac6074 Жыл бұрын
You're a Beast. Much respect to you brother
@HVACRSurvival Жыл бұрын
🤜🤛👍👍🙏
@MrJujubean8 ай бұрын
You mentioned your dad built M1 tanks. Did he by chance work at the tank plant in Lima?
@HVACRSurvival8 ай бұрын
Correct 👍
@billburnett9951 Жыл бұрын
I would love to see the unedited video and count all the swear words! 😂😂
@josephtramutola592 Жыл бұрын
Nice work
@jamestoy426 Жыл бұрын
Too much fun awesome job i wosh they would teach rack system in school
@HVACRSurvival Жыл бұрын
It's a lot to learn, I'm still learning...
@FPHA697 Жыл бұрын
Great job as always!
@HVACRSurvival Жыл бұрын
Much appreciated 🙏
@RSBot2jar Жыл бұрын
Thanks for sharing this 👍
@HVACRSurvival Жыл бұрын
Your welcome!
@andrewmcdonald4519 Жыл бұрын
Agreed great work
@Justintime631 Жыл бұрын
Great job and great video
@mattalexander8919 Жыл бұрын
Holy moly!!!! What Oxy tip is that???!?!?!??
@HVACRSurvival Жыл бұрын
It's in the description
@seanmichael8202 Жыл бұрын
This one is some real insight into market work. Excellent work, man. How many hours were you able to charge on that one, if you don’t mind my asking? That’s the thing about them markets… It all takes time It used to trip me out to step outside and warm my detector up, to walk through the slider and it go ape shit 🤣
@HVACRSurvival Жыл бұрын
With drive time I think I had 3.5hr on the first and 10 on the other day. I was about to go ballistic when the detector went off after the repair. 😡😩
@seanmichael8202 Жыл бұрын
@@HVACRSurvival Dude, I know the pain. It became policy (when I worked markets) to perform a walk through leak check of every market after every service, took about an hour to walk through every time. Pain in the ass at times… I mean, we got lots of work out of that policy, but man… I wasn’t always looking for a reason to stay, if you know what I mean 😵💫
@TheGhettoLobster Жыл бұрын
Wow they need to upgrade defrost to digital. Never seen old school mechanical defrost like that in a grocery store..everything here is cpc, Danfoss etc
@HVACRSurvival Жыл бұрын
Supply chain issues, this one's slated to be switched to an Emerson e2 controller hopefully soon.
@TheGhettoLobster Жыл бұрын
@@HVACRSurvival gotcha. We do some big stores and they are starting to go from E2s to E3s. Not a fan of the new upgrades
@uxwbill Жыл бұрын
Does that one timing motor run all of those defrost controls? Although I'm biased, I thought you were being kind of hard on the H-10. Sure, it was slower, but it still got there.
@HVACRSurvival Жыл бұрын
Yes, one motor for all 15 or 16 clocks. I loved the H10 for several years but it always left me wanting more battery life, a more resilient sensor that wouldn't be destroyed from a large refrigerant hit and the ability to reach deep into the unit you're checking with one hand.
@jorgeenriquevaldes7778 Жыл бұрын
Excelente trabajo 👏 👍 💪 👌
@HVACRSurvival Жыл бұрын
🙏🤜🤛👍👍
@timhenry370111 ай бұрын
At what point do YOU quote a new coil? Is it less hassle to repair it? It’s been my experience that if you do repairs on a coil you own it and every little thing that happens they want for free.
@HVACRSurvival11 ай бұрын
Where are you going to get a coil it's going to fit that case?
@adamdnewman Жыл бұрын
Working the grind 😁
@brent562 Жыл бұрын
This is nuts. How long you been doing this
@HVACRSurvival Жыл бұрын
Depends on what segment of the field you're talking about. HVAC started in 95, refrigeration for probably last 15 years. 9 years where I actually do it everyday. Grocery stores probably the last 2 years
@brandonmickelberg6787 Жыл бұрын
Where do you get the drill bits that clean/sand the pipe?
@HVACRSurvival Жыл бұрын
I linked them in one of the discussions down below you can get them at Lowe's or Amazon