HOSHIZAKI ICE MACHINE FREEZE UP

[@Assault_corgi]

Im not an HVAC mech or anything at all but i find this fascinating watching these videos.

[@apprenticephil649]

Assault Corgi maybe time for a career change?

[@rds766]

Same here.

[@snoopyjc]

Assault Corgi Ditto!

[@gbowne1]

Me too. It's a system though and I like mechanical things and learning new stuff that may be one day useful.

[@deanmohamed7575]

your absolutley right, they thought it was a scaled evaporator and changed it. Thats where thoroughness comes in. Other night I was checking a 5 well steam table and it was 8pm and I just wanted to check the heater to the well they were complaining about. But you kept popping up in my head and saying "look at the big picture". I did and I found two other wells with their safety limits bypassed and the unit is not grounded!! You are teaching great attitudes. Thank you sir.

[@HVACRVIDEOS]

Wow thanks bud I'm glad I could help!

[@TheChurchofCacti]

Glad you mentioned the Cube Guide. Customers often don't want to replace that even though it's so cheap compared to a Water Pump. I always tell them "It's up to you, but this Cube Guide is about $40 and your Pump is about $400-$700." That line usually gets their attention xD

[@jaye1967]

Service and repair videos are one of my favorite types now. They really show people what goes on to keep a lot of our modern life running.

[@caseygearhart2227]

Dude. In the last 2 months ive watched your videos ive learned this, WOW are there some half ass guys in HVAC and alot of people who watch this that dont know about HVAC just dont understand the time and intelligence it takes to do what you do my friend. And not just what u do but how you do it. You go above and beyond and the world is lucky for guys like you

[@HVACRVIDEOS]

I will be going live on KZbin this evening 8/26/19 @ 5:PM (west coast time) to discuss my most recent uploads and answer questions from emails, KZbin comments and the Live Chat if you can stop by and check it out kzbin.info/www/bejne/bWnOkmOwodB0iJY

[@wazza33racer]

people doing things "half arsed" is common everywhere.............sadly.

[@SovereignMax]

Ice machines are a plumbing fixture and me as a plumber work on them.

[@kingrum5147]

It's always important to make sure the right parts are on the machine to eliminate any problems that might arise. However it is good to install a water filter system with a water pressure guage to make sure you are getting enough water pressure. Usually when a bin thermostat goes bad either the machine wont come on or the machine wont turn off. It is good to use a volt meter with ohms and continuity to check the bin thermostat. Many times also a defective or dirty float switch can cause a freeze up on the evaporator for Hoshizaki

[@n24913n]

everytime i watch ice machine videos i swear i'll never have ice in a drink again... you must the only person thoroughly cleaning these things...

[@mikec260]

That’s why we clean ours once a month….those machines can get pretty nasty

[@JohnDavis-ie7co]

I just shifted from only doing residential AC to working on everything hvac and refrigeration. These videos are great and very informative, I learn something in just about every video because of the tips and tricks you share. Thank you for putting the info out there.

[@BrBCatsOnFireLuL]

They need to clean the Ice machine cavity more often. There appeared to be spores of some sort on the walls.

[@jimbeam7248]

90% of ice machines have quite a bit of mold in them most people don’t keep up with cleaning

[@kurtheil4922]

Yeah most of the big bulk ice makers have mold in them and unless they get cleaned on a regular basis. Which with most companies doesn't happen because that would mean you'd have to spend labor dollars on it and the labor at most places is barely enough to keep the doors open much less do thing like clean machines like the are supposed to be. If you think that ice bin is bad you don't want to know what a fountain machine looks like. I started managing a convenience store and got taught how to properly clean the machine I've never drunk fountain drink ever again.

[@Jason-wc3fh]

@@kurtheil4922 yeah, but that water is not exposed as it is in an ice machine.

[@gsxrsquid]

I don't know about the newer machines but 15-20 years ago When I had a bad freeze up on a Hoshi it was normally related to harvest problems. Hoshi is my favorite machine. I heard Hoshi had problems with evap plates separating but I only ever saw it once and I worked on a lot of them. I could work on them all day, though I do not anymore. Over the years 98% of ice machine problems are water side. Replace maybe 2 compressors and one expansion valve and maybe one bin stat. Lots of check valve rebuilds.

[@markrayes2973]

we have these machines at my job... so when it broke and kept running but make a little bit of ice i got curious to check KZbin... and now im recommended these and im not disappointed

[@HVACRVIDEOS]

Thanks for watching bud!

[@thaddeusfeldhouse6174]

If the machine had a history of evaporator freeze up, It could have been why the evaporator went bad. Those evaps are made of stainless steel. the coils are sandwiched between the plates. So, if water gets between those plates it will over time separate the plates from the coil.

[@sirrealism5806]

Thank you for mentioning this. I was going to say the same thing. Not very often have I seen one leak but many times you see the tubes broken from the evap plate. This causes long freeze issues.

[@robertarnold6672]

Another superb video. I am trying to learn more about ice machines especially Hoshizaki ice machines & this video offered really good troubleshooting procedures on iced evaporators & general preventative maintenance tips. I learned a lot from this one!

[@OcRefrig]

Good vid ! nice catch on the water valve. ive got a reputation for being thorough , but u take it to the next level & i never even thought there was a next level. people think im too thorough. im just going to laugh the next time someone thinks im being too thorough.

[@whatshappenedhere1784]

Those Hoshizaki's are the best imo. I have never serviced one that has had its lines cleaned out though, they get run 24/7 and neglected as far as cleaning goes

[@HVACRVIDEOS]

thanks for watching, I am going live a little early today 12/24/18 at 12:00pm pacific standard time come on over if you can and check it out kzbin.info/www/bejne/qHXHZWlvf9yMrdk

[@phil955i]

I love Hoshizaki ice machines, you can keep the rest. I also find that water scaling on the evaporator causes ice to stick, requiring a de-scale. Don't know if you have chalk in the water causing scale over there in the States but we do in certain areas of the UK.

[@HVACRVIDEOS]

In my state of California we have very hard water lots of scaled up evaps thanks for watching! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific standard time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@scratchback2001]

I live in Melbourne Victoria Australia and I love your videos! I'm a club DJ and A/V engineer studio and mixing sound live and some engineers are so lazy! Their work and sound quality is woeful!

[@rds766]

I know absolutely nothing about ice machines but I totally love your videos.

[@louprentz8554]

IVE WORKED ON A MILLION OF THESE, YOU FIXED IT CORRECT WATER FLOW AND BIN STAT EXTENSION

[@HVACRVIDEOS]

90% of the time freeze ups are caused by poor water flow....

[@shanebehm8251]

I usually find that the float switch is the main issue on freeze ups. It gets stuck and won't go into harvest.

[@hangngoaigiare]

Shane Behm ya people clean it and put it back at the wrong level too. End up adding too much water into the machine. Ice cubes are a lot thicker and take longer to harvest.

[@davepenprase]

thanks for the vid sir. i appreciate the info the concise nature of your delivery and not including random unnecessary stuff. well done

[@jdrago1968]

The dog in the background at the end of the vid is awesome.

[@dmmaddex]

An excellent presentation on the ice machine.

[@HVACRVIDEOS]

Thanks for watching!

[@jaimeortiz7649]

You are very safe and safety minded.

[@novisnick6928]

I have two of these machines and all the cleaning tips are great! Love your attention to detail!

[@phoenixfridge1495]

I'm lucky One of my ex apprentices went on to work for Hoshizaki UK for 16 years Hes an Absolute encyclopedia of information As an aside we just call them SHARKYS AS customers have various ideas as to the name to hilarious levels

[@anthonystewart3787]

Thank you so much , I could never fix a ice up on those machine I just defrost and adjust the 1 and 2 dip switch on 10 pin connectors.

[@HVACRVIDEOS]

Thanks for watching ! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@clintgray1623]

99 times out of 98 the problem is the water line is to small and insufficient water filter

[@bartdabi4793]

great tutorial. i want to move from car AC do hvac and this is great way to gain knowledge, really appreciate that kind of videos.

[@Ironwindsock]

Awesome video! Was stumped earlier today on a smaller Hoshi unit with this same issue. This video was all kinds of help, thanks!

[@alongtheway1472]

I know jack about this industry. But this guy seems like a pro at it.

[@HVACRVIDEOS]

I'm a novice that has made a bunch of mistakes, I'm learning every day!

[@steve19841117]

chris you got lucky. what i deal with hoshizaki last time was the hardwater runing in to the machine. they do have the water filter but still a lot of lime build up it was a nightmare. thank you for the good video 👍

[@HVACRVIDEOS]

Thanks for watching! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@joevinski1]

Idk if it’s just a Florida water problem but down here the biggest cause of hoshi freeze up is the evap plates separating great videos brother I swear all new hires need to watch your whole library to know what to expect and how to trouble shoot !!!!

[@HVACRVIDEOS]

Thanks bud

[@UnderCoverrAlien]

Wow I learned a lot from this thank you. Now I know all the things I've been overlooking. Great video 👍 I will definitely use this on my next service call.

[@DonTheGoods]

Great video once again. Had the same issue on a km2400srh3 cuber from Hoshi. I also found a wrong sized water inlet valve and the bypass spring was weak. Dumping water into the float switch from the top hose. Replaced both those and ran fine for 4 days then all of a sudden froze up again. Tested the float switch but found was intermittent and hanging up. Replaced float switch no more call backs. Excellent info about the water inlet line size. Very common to see 3/8" line to every unit no matter the size. Yea I agree do not touch the board. Well done!

[@HVACRVIDEOS]

Thanks for watching ! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@OcRefrig]

Make some golden rules. 2 of mine are , if u get a service call on a machine and float switch or ice thickness probes are suspect/ the problem Allways replace them. They will last much longer and customer will be happier in the long run. ive proven it. clean something and it works for 3 weeks to 6 months or a year. replace the part and customer can be happy for many years.

[@garysmith9772]

A lot of customers would say that the previous mechanics were ripping him off but what it boils down to is the mechanics are incompetent

[@HVACRVIDEOS]

Ain't that the truth! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@jimkey920]

Hoshizaki makes a great line if machines. When they first came to the US they were a copy of the Kold Draft machine. I worked on some of those early machines, I think at Denny's Restaurants/ I really love working on ice machines. They are inside, for the most part. So many ways to do the same task. I like Ice O Matic and Manitowoc, beware the use of any cleaner except Nickle Safe.. I appreciate your abilities. I had 22 employees at one time. Only 2 were at your level.

[@HVACRVIDEOS]

Thanks for watching and taking the time to leave a nice comment. I am still learning everyday.... 22 employees wow, I have 3 and some days I feel like I can't control the 3 I have, i couldn't imagine 22.

[@jimkey920]

@@HVACRVIDEOS I know that feeling. Too many made more money than I did. The worked less hours for it. We had free draft for employees from a keg in a 1938 Servel Gas refrigerator. Couldn't do that now. I once took a weekend off, went to the mountains. Saw one of my trucks 100 miles fro the shop, on a Sunday. "Fixin Mom's Refrigerator." Your at the best size.

[@PatrickBridge]

Very informative. I learned a few technical tips. Keep up the great work.

[@jaimeortiz7649]

I like your videos, you are thorough and explain everything that is a problem or could be a problem.

[@HVACRVIDEOS]

Thanks bud

[@jamesmclaughlinprimitivele4587]

Good job you actually know what your doing.

[@md929]

I have my own business doing appliance and hvac/r repairs and I get call on ice machines from time to time. Don't know a lot about them but I just look for the obvious what's causing the problem. I would've broke the hard ice tapping it with my little hammer and steamed the rest inside. I try to get tech support when I can but that's not always possible so I just try to figure out what's happening on my own. Good video. Reading the manual definitely helps a lot.

[@1989Chrisc]

Keep tapping with that hammer and eventually u will bust a coil

[@md929]

@@1989Chrisc I wouldn't do it if I didn't know what I was doing. That hard ice is nowhere near the coil.

[@videos10]

Lol

[@Rado88]

Seeing these ice machines is making me not want ice from a restaurant anymore lol

[@andytran7453]

I've learned a lot from your instructions. Thank you !

[@luisnew6738]

thank you for the video i am going to recommend your channel to the PM tech on how to clean the machines I tried telling him to just read the instructions its more of an attitude you go into each service call with eyes wide open and desiring to do the best job I possibly can.

[@ronh8047]

I realize this is from four years ago, but the number one reason for a hoshizaki freeze up is a plugged inlet screen, first thing to look for. It didn't look too bad, but bad enough when combined with the reduced supply water line & improper water inlet valve(nice catch there). But I'm not sure why you replaced the binstat?? It had nothing to do with anything.

[@brockcomegys7380]

20 secs into the video and I wouldnt order ice with my drinks until that bin was cleaned and sanitized thoroughly.

[@bradwilmot5066]

Am I the only one who went "DOG!" as soon as the recap started? :-)

[@gavelboy01]

Nope... I'm 200% with you. I work 2 jobs. 1 at a restaurant equipment company and do military dog reaclimation when returning from duty. BTW.... great video. Keep em coming.

[@franciscoalejandravazquez5365]

I like your videos,very clear the explanation about every job.

[@mickmclovin3020]

Great video showing how the initial installation effects performance and long term health of the machine. Great Video!!

[@joecephus352]

I found a good way to get that sanitizer throughout the ice machine is to cleaning mode and dump your 3 oz of sanitizer in the water reservoir.

[@HVACRSurvival]

Wow you crammed a lot of information in there.... good job.! 👍👍 Hoshsoki's can be a major pain in the butt sometimes.

[@HVACRVIDEOS]

Yes they can, I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@tinbasher84]

You rock man- thanks for another great video.

[@davidraezer5937]

Way to go. Very thorough diagnostic route.

[@alasdairmunro1953]

Didn’t realise getting ice in your drink was so damn complex! 👍🏼👍🏼

[@jayyoung5423]

Great work. That ice bin with the rust at the top made me ill. Also, being in the restaurant business, all that residual ice in the bin needs to go.

[@517cliff]

I usually put the evap cover on and hit the lines from the top with a hose. Doesn’t get water everywhere.

[@hangngoaigiare]

This evap freeze up is typical hoshizaki ice machine problem. I talked to their tech and they guide me through all kind of steps. Problem never solve. I fix this by either adjust the water float level or increase harvest time on some model.

[@Slugbunny]

Thorough job, good tips and mindset!

[@brucecrutchfield3473]

Awesome vid! Showed me a thing or 2 on Hoshis and I thought I was pretty good lol.

[@HVACRVIDEOS]

Thanks bud!

[@jaymesrod4209]

Dude can i apprentice under you. You are one thorough technician!

[@abelurrutia1192]

That guy on the background blends in with you rug. Nice dog.

[@trentrefrigerationllc8791]

Freeze ups on a Hoshizaki will cause plate separation, Great video!!

[@HVACRVIDEOS]

Thanks for watching , I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@trentrefrigerationllc8791]

@@HVACRVIDEOS I will...

[@rubensanchez3419]

Love watching your content Man. Your killing it out there.. would love to watch more walk in freezers trouble shooting

[@sebassjay]

My biggest problem is that after working on about 40 or so of different ice machines, not 1 of them had their manual available. Doesn't matter if it's a huge place with 20 machines or tiny restaurant with just 1, if it's a 20 year old or 1 year old unit. The book is always missing. Hard to look up correct procedure, parts and sequence.

[@nancykeslar7656]

These videos are sooo interesting. I’d rather watch these than anything on Netflix. Gary Keslar

[@mattzurzola4664]

Have same machine at work Your video was right on

[@paulpowers2861]

Had a brand new hoshi 6 months break a cube guide piece and lodge into the check valve. I swear those things are getting more brittle!!

[@HVACRVIDEOS]

Yeah it was better when the cube guides were stainless steel!

[@HVACRVIDEOS]

Yeah do you remember the old dssu machines that had the stainless cube guide? But I am sure those didn't make them very much money!!

[@Tsiikki]

I was just thinking how in the hell in commercial machines they're not stainless? Easier to clean too!!

[@sirrealism5806]

I agree. On the other side I get warranty service call plus 2 hours to change them so I am always looking for them. That and bad evaps on the new machines. I dont know what they era using for solder on these new machines but its crap. I have changed 10 evaps in the last month or so all under warranty with machines that are 6 months old or less

[@dangertaco6856]

I'm very familiar with Manitowoc but these are a whole different beast.

[@sirrealism5806]

I work on both. Stick to the manitowoc because every time you work on a hoshizaki you end up bleeding. Everything is crazy sharp!! Lol.

[@novaorbitdragon]

The quality sure has increased over 3 years :D

[@andressalva4946]

Great videos. Thanks for sharing your knowledge in refrigeracion

[@johnrece6622]

Health inspectors love go over those ice machines real good lol

[@johnrece6622]

you ever them were the coating has came off the evap and the ice will come off the plate?

[@JoseRamos-cm5qd]

God i would love to be your apprentice. I'm a journeyman electrician who also knows home havac. But I learned it over the phone lol. I'm no tech as yourself but, if it has a working compressor, two fans, and two coils I will make it blow cold damn it! I have been seriously thinking about getting into the refrigeration side of things from ice machines to walk in coolers and freezers. To really learn I know its best to start from an install crew but at 40 I'm not sure if i'm up to building coolers and obviously the drop in pay.

[@ryanmckenzie484]

just fyi at 8.09 is a major install error your line set have vertical loops that cause oil to get trapped due to oil migration. just fyi that can cause issues that are hard to catch much like seperated evap coils are hard for an inexperinsed tech to find love yout vids

[@HVACRVIDEOS]

Thanks bud

[@Free_Samples]

I'd love to work with you. You are so smart and thorough.

[@willow091]

I don't miss working on these.

[@walterjohnson9177]

Great Video...several good tips Thanks!

[@powerpooch2000]

That was ingenius how the GPM of water was calculated. Your expertise is a thing of beauty to watch. How else could that be done? maybe using an empty gallon jug of milk or something and filling it up while timing it? is that plausible?

[@HVACRVIDEOS]

Yeah I guess that would work

[@TheWoodman064]

I really enjoy how detailed and specific you are! A true master of the trade!

[@drcolster]

Hey Chris and other Guys, i installed a Brand New KM1301 SAH-E machine in April this year. straight off it didn't work, dumping 10 litres of water 10 minutes into the freeze cycle.. pulled out the dump valve spring and stretched it,machine worked.. got new spring from spares,it had 5 coils,original spring had 4 coils. according to Hoshi USA there is only 1 spring...???... and they recommend you stretch it to be between 38 - 50mm long. Anyhow ,in the past 7 months i've had 7 ice ups, never any fault beeps, always defrosted and checked every component to work, its makes ice a ok..did the full ice up fault sheet for Hoshi USA and they saw no issue with water or anything else.. once it ran for a 68 min freeze cycle,after i defrosted it ,i changed PC board, then discovered Hoshi manual says dip switch setting are max 60 mins, but its wrong and those dip switch settings are 70 min max freeze cycle factory set... iv'e set dip switches for 50 min now... have been given a new water valve , new float, changed, still ice ups at irregular intervals.. .. 12 days, 7 days,40 days,12 days,80 days.14 days.. David at Hoshi USA is stumped,30 emails later.. ive put 6 of these in and never had issues over the past 8 years.. this model has magnetic bin switch, seen bin full and off 10" under ice head countless times, tested bins switch a 100 times.it works..im getting a new comp relay to fit soon... any clues out there USA Techs...??? thorough job on that machine Chris..

[@HVACRVIDEOS]

Test the water flow like I did, what is the gpm if the water coming in. ?

[@drcolster]

@@HVACRVIDEOShey Chris, From an Empty Water Trough, it fills in under 1 minute and starts hot gas cycle then water pump, then freeze cycle.. have tested this many times, water pressures ,flows, etc.. David at Hoshi USA has no answer as said..that's why i'm getting new comp relay, maybe that is jamming on, i've change nearly everything else... if that fails they are sending another machine...

[@HVACRVIDEOS]

Wow I am speechless!

[@drcolster]

@@HVACRVIDEOS I know, Big Mystery...I need Robert Stack from Unsolved Mysteries... lol

[@aaroncruz5854]

You've come a long way from this video. Checking on out your bare studio!!😂

[@boggy7665]

We had a Hoshizaki Cube Star in the employee break area. (Removed upon a remodel some years ago.) I can't forget the locally-made sign that was posted on it. "Do not put anything in this drian (sic). No coffee, soda, juice ect (sic)." Misspellings bug me, and so this bugged me every day as I had to see it every day.

[@husseinkaced460]

Great job as always .

[@HVACRVIDEOS]

thanks Bud! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@anthillmobstars]

I hate the amount of times I've seen issues with hoshi unit that were all caused by improper installation. The first thing I do on any ice machine I'm working on for the first time is check the supply line and the drain line so I can see for myself it's done correctly.

[@HVACRVIDEOS]

You are a smart man most people don't know how to read the manual before installing them! thanks for watching , I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@rubelborg4137]

I wish i had access to these video wen i was a tech great video

[@HVACRVIDEOS]

I wish I had videos like these too, that's why I am making them now, to help out the next guy and help bridge the skills gap...

[@9tomato9]

I know absolutely nothing about ice machines, but I am fascinated how they work. If I did own one, I would love to have you as my serviceman. You seem very knowledgeable, thorough, and concerned to get the machine to operate properly. Excellent video. Is that an EV RE-320 Mic in your studio?? Sounds great, nice EQ set up.

[@HVACRVIDEOS]

It's the rode procaster mic. Thanks for watching and thanks for the audio comment, I really have no idea what I'm doing and just am winging it with the mixer settings ! :-)

[@texture6]

I know I have more questions. But that water valve is like a TXV you need to have the right tonnage. For it to function properly.

[@HVACRVIDEOS]

That is correct without the right flow rate coming in it can cause all sorts of problems, freeze ups being the main one.

[@kenneth11158]

Not enough water was my first guess even before reading the description, also check the evap for any bulging between the horizontal ridges. I love Hoshizaki machines, but one bad freeze up can wreck the evaporators. I'm only 4 seconds in, so on to the rest of the video.

[@hargrave961]

Nicely done.

[@RabbitsInBlack]

CLEAN THE DAMN ICE MACHINE! Health Inspector will get you on that.

[@snoopyjc]

Nice woofer!!

[@mattagee8104]

Great video! Lots of good information here. Thanks for sharing

[@HVACRVIDEOS]

Thanks for watching I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@god1246]

We have one of those at the place i work at, Damn thing is always freezing up and constantly beeping.

[@sidtrex1]

Man your v d o the beat thank you

[@jfiguet205]

Great video and very interesting in the troubleshooting! You always bring nice info; Thanks!

[@HVACRVIDEOS]

I will be going live on KZbin this evening 11/4/19 @ 5:PM (pacific time) to discuss my most recent uploads answer questions from emails, the chat, and KZbin comments. Come over and check it out if you can. kzbin.info/www/bejne/m5XVq52Qib-LZ5o

[@tempdude8168]

Good learning info, good detail, but deicing, running multiple cycles, looking up all that info. weighin ice and water times adjusting board. must of took 3.5-5hr hr service call. Inless ur company not to busy way to much time spent, normal to have 3-7 calls a day. Also proper water valve, bigger water line, and proper bin extension lots of customers will ask. it been running like that for years why all of the sudden won't work? 95 percent of the time 1 part out or just got to dirty. Good job tho.

[@donnierobertson3088]

Great job again

[@HVACRVIDEOS]

Thanks bud

[@kilroy238]

This was a really good video. You did a great job. How long do you think you were there that day?

[@HVACRVIDEOS]

About 5 hours

[@Akvan79]

Good advice and good video. I learn a lot

[@HVACRVIDEOS]

thanks bud! I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@moonjazz5]

What about the lack of ever pure water filter combo 3filters installed to protect the plate

[@HVACRVIDEOS]

great catch this customer doesn't have water filters on most of their ice machines, but I will be submitting a quote to install some. Thanks for watching I am going to go live on KZbin tonight 11/12/18 at 5:00PM pacific time to discuss my most recent uploads and answer questions. Come on over and check it out kzbin.info/www/bejne/fJnQm2udaKyXaNk

[@rockwithjerry]

I was just thinking that! Why spend 30K on an ice machine and not put a filter on it?

[@andresruelas5552]

Have you dealt with the new KMS- 2000 MLJ models.i have two units which are at two separate stores about 100 apart and they're both freezing up they got installed 2019. I've tried following hoshis check list and I end up short and baffled.

[@harbbains5718]

Great video Bro!!!!