You crack me up man!! One of my favorite rc channels.
@hybrid324944 жыл бұрын
whats up man! Thank! Glad you like the video. I need to remove the engine now and work on it, seems the pull start needs som attention too, no big deal. I took like 1 tablespoon of salt water out of the motor so far, hahaa. Virus free tho...
@claytontroutt93404 жыл бұрын
Hey Hybrid32494, breaking out my old Tmaxx. What steering servo do you have on your Tmaxx? I'm putting dual servos on mine just because I can I guess. I had bought 2 Tmaxx's years ago for parts at a pawn shop. Plus these old school tires are heavy and could use a little help. I love the Chevron tires.
@jbirdmax4 жыл бұрын
Today: takes car to beach and gets saltwater on and in it. “I’m not gonna let it die”. Six months later: Where’s my survivor edition RC car? And what’s this red crunchy stuff where my car used to be?
@hybrid324944 жыл бұрын
ahahah, good one!! The NitroGang isn't gonna let it die, im about to go work on the motor right now. So far about a tablespoon of ocean water leaked from the pipe. Next video will be the engine repair, wish me luck my dude!!
@jbirdmax4 жыл бұрын
hybrid32494 indeed, good luck bro.
@jfieifm4 жыл бұрын
Driving that revo near the water made me nervous! Great video!
@hybrid324944 жыл бұрын
haha, yep bro!! that one pass was quite close. If it was not for that cartwheel flip it would have been fine. I knew the risks I was taking, it's ok. It will be fixed and restored soon. Too bad I did not get any car video FPV style, maybe next time.
@RCVOODOO4 жыл бұрын
Nothing like the lick test to confirm saltwater. Lol
@hybrid324944 жыл бұрын
hey bro!! Yes, I had no choice! I can guarantee you the NitroGang is safe when licking the engines, they are not virus carriers! ahaha.
@rcsubject98444 жыл бұрын
I’d be afraid of having a run away into the ocean 😂😭
@just_j0e4 жыл бұрын
Then you would have a good reason to buy a new one lol
@joeyfesta20424 жыл бұрын
I agree
@nathanhunzeker60334 жыл бұрын
You know, running the body on may or may not have prevented the water finding the intake...but that's what I was worried about. 🙂 As always, great video!
@hybrid324944 жыл бұрын
hey dude!! I was thinking just that myself. Pissed at myself for doing this, but it's fine. I'll fix it and we will try again. The real reason I didn't mount the body is also because I was planning on putting my GoPro on the chassis to record real time speed pass runs, just didn't get the chance to do so.
@rcpostcard5354 жыл бұрын
You need to get a Tub of WD40 and soak the whole Truck in it as to say , Should get rid of the Salt , Lucky you didn`t Seeze the Engine :) Put lots of WD40 and oil down the the piston head and you should be OK , You should be able just to take the Glow plug out , just remember to tighten up the Heat Exchanger in a Star fashion to get an even seal , Cool Vide Bud , nothing like Nitro and Salt in the morning to fight off Carona V ? , lol :) :-)
@RAC29.4 жыл бұрын
Agree bro. I love revo nitro. Nice bashing always watching ..
@hybrid324944 жыл бұрын
hey dude, thanks for watching! I have no now take the engine out and see what happened, it should be fine though. Need to clean the entire system now.
@Meyers2strokeRcgarage4 жыл бұрын
Great video Dmitri!!! I figured when it flipped and that wave got it sucked some water in through the intake.
@hybrid324944 жыл бұрын
hey dude, yes! After lookin at the video footage that's my conclusion too. I didn't think it would happen that fast, it was barely in much water at all. Plus the filter I'm using is a top notch one, but ofcourse it cant prevent water from getting in.
@michaelmiller71994 жыл бұрын
Nitro gang mascot showing how it is done.
@hybrid324944 жыл бұрын
hey bro!!! Since the gyms are closed the Primal MT mascot beagle has been helping me exercise. not easy doing pushups with a 35-40 pound fat little beagle on your back, lol. I did about 25, but that's because I had to go slow so he would not jump off.
@christianwornall10474 жыл бұрын
Well at the end of the day it's what the hobby is all about love my brushless electric RC cars but I also love my nitro and petrol RC it's all about fun
@hybrid324944 жыл бұрын
hey bro!! Yes, totally agree. Any Rc is fun, I rarely drive my nitros in such dangerous environments, and it it was not for that cartwheel flip at high speeds this thing would have been fine. I almost took my baja to the beach here, but the might be a bad idea, I don't just do dumb stunts for views, you know. Not worth it!!
@OrcaBoat32 жыл бұрын
One thing you have to watch out for when driving near the ocean, is not so much the salt water but the salt in the air. There is so much salt floating around in the air and that gets into the engine and the electronics. There's all kinds of stories of people flying RC airplanes over the ocean and they lose control of them because the Salt Air corrodes the small wiring in their servos. I know a Chevy dealership that has its lot right near the ocean, and all the new vehicles get rust on them very quickly underneath.
@NitroMike4 жыл бұрын
Nice intro man! But you gotta watch out at those beaches! Nitro engines hate salty water!
@longboardguy4 жыл бұрын
Hey brother been a while since I commented but always trying to watch. Hey you know what your a true mechanic now some of the old fellas I work with use to do a quick “taste” test haha to figure out issues. We work on Caterpillar mining equipment. So it’s not unheard of. The Revo was flying good until the crash. Stay safe out there 👋🇨🇦🍻
@hybrid324944 жыл бұрын
hey my guy!! Welcome back, I know you have been watching my vids for a long time, really appreciate it. I try to go for VLOG style never ending vids, because the nitro never dies!! ahah . Anyway, I know all about the Taste testing when it comes to fluid on real cars too, but I'm not the OCD< ahah. Hold on lemme go lick my prius, one second. All good.... Next video tomm, engine coming out hot from the oven my dude.
@longboardguy4 жыл бұрын
hybrid32494 very cool I’ll have my eyes out for it. Lots more free time with all the lock downs and social distancing going on. Wish the snow would melt so I could runs some RC. I picked up a steal of a deal $80 for a near mint condition HPI RS4 3 nitro touring car. It’ has the bmw m3 body and that thing is in very good condition too can’t wait to clean it up and run it a bit. Even has the 2 spd and ROTO start should be a lot of fun. I don’t have a ROTO start and they seem kind of hard to find. Any ideas on what I could use? A drill with a cut in half drive shafts of bone that fits or something? I did see Associated has a nice compact starter box for about 65 bucks CAD I could just go that route I guess
@FifthScaleOrBustRc4 жыл бұрын
You gotta risk it for the biscuit my brother!!💪👊 thats what i always say! Its just too much fun rippin on the beach i cant get enough of it! That sand was gnarly with how compact it was and that perfectly formed jump my max 5TS woulda loved it! I just ordered a set of paddle tires so next video we'll see how they fair compared to the ice studs!😁👍👍
@rc_teo_nade_2163 жыл бұрын
At 7:00 it was one sad moment because you have not fixed it yet to this day and I am still waiting on it.
@hybrid324943 жыл бұрын
you're right bro! I'm still pissed over it. But I did repair the water damage and ran it for a while after. IT only seized up on a high RPM pass. These next few vids will be sure to cover this thing. I've been swamped with random other rcs, the Nitrogang is always busy, you know .
@FargothPL4 жыл бұрын
Saltwater has corrosive properties - it is good to rinse the engine, so as not to subject bearings to corrosion. In addition, internal combustion engines do not like water - due to lack of space for the piston, it could bend or break the connecting rod. What's more ... Once for fun, I sprayed a working 2t engine of my 50CC motorcycle with water. The cylinder shrunk (cooling rapidly by water) but the piston was still hot. Due to lack of slack, the piston ring broke and destroyed the entire piston and cylinder liner XD An expensive lesson, but now I avoid water not only on this motorcycle but also my two nitro buggies. I don't want to hurt them
@Stizzy_BK2 жыл бұрын
see the verrazzano bridge in the back! No idea you were on Staten Island small world.
@hybrid324942 жыл бұрын
hey my dude!! YES! I'm a Staten Islander, I love this place, I have so much Terrain Variety to RC in, in fact most of my videos you will recognize are filmed either on location in MIdland Beach, South Beach or Miller field.
@Teknakill Жыл бұрын
I was such a dumbass and sold my "hot rodded" nitro revo....Now I am trying to find another Revo to "hotrod" because it was a great machine and I have even better plans for my future replacement!
@joeyfesta20424 жыл бұрын
Sand & salt water. An RC trucks 2 worst enemies.
@KruseNStuff4 жыл бұрын
Well not as bad as it seemed🔥Good stuff man🔥💯🔥
@hybrid324944 жыл бұрын
hey my RC homie! what's up. Let me tell you, when I removed the exhaust pipe after, a whole tablespoon of water leaked out. lol.
@KruseNStuff4 жыл бұрын
hybrid32494 yikes. AWESOME vids my man🔥💯🔥
@choke6664 жыл бұрын
LOL, YOU ALSO CRACK ME UP DUDE! YOU FUNNY AS HELL HAHAA!!!
@hybrid324944 жыл бұрын
hey man! thanks for watching and your comment!! you the man for watching some awesome Nitro Content. BTW this revo got a top speed of 46 MPH.
@choke6664 жыл бұрын
@@hybrid32494 YEA MAN, THATS INSANE TOP SPEED! I LITERALLY CANT BELIEVE IT BUT I SAW IT WITH MY OWN EYE'S!
@GussCustomCreations4 жыл бұрын
Great vid guy! Sucks about the Chinese restaurant but at least you still get to enjoy the RCs.
@corey4c1053 жыл бұрын
I am out here in NJ and just got a revo today my first nitro rc!
@GrumpyOldManRC4 жыл бұрын
Thank you for putting a big old 😁 on my face My Friend! Stay Safe so you can help me some more!
@hybrid324944 жыл бұрын
hey my friend! Hope you are doing well. I hope you catch up on the following videos on this revo, I wound up baking the engine in the oven to restore it.
@luismontoya59734 жыл бұрын
Where do you buy your nitro rc stuff? I usually buy on amazon but shipping takes forever due to the virus
@MikeStallone4 жыл бұрын
Great vid. Quick question. I run the flysky gt3b on my kraton 6s. If I tap the throttle it’s doing wheelies. How do I lower the throttle sensitivity?
@hybrid324944 жыл бұрын
hey bro!! Sounds like you got way too much power!! LOL. Anyway, that's joke. The only thing you really need is a programmer for the ESC. If at all possible yo need to lower the "punch" setting. I always lower my punch setting with the Castle Link USB programmer, only for Castle ESC's ofcourse. Your remote can only lower your dual rate and exponential across the entire throttle range, what you need is to lower the "initial punch setting". Putting on a larger pinion will lower your initial torque too, but this is a really "dirty way" of getting what you want, cause it will put stress on the system and cause higher top speeds too.
@ParRagon-4 жыл бұрын
Did you calibrate the ESC with the transmitter? The arrmas don't come stock with a Flysky so this might be an issue too
@RBAERO4 жыл бұрын
Nice video! Can I install the ezstart on this engine? And the exhaust original traxxas exhaust curve fits to this engine or what I need to buy to fits?
@lokomono894 жыл бұрын
Hey I have that same engine but it needs a rebuild. Do u have some videos on rebuilding engines. Thanks
@h.w.m.3064 жыл бұрын
Ive seen those tires before? Are those stock? I think the jlb cheetah made a fake version of it
@jonathankuhn78374 жыл бұрын
Just sitting here with my revo watching your vid. Cant waot for your next revo vid
@hybrid324944 жыл бұрын
whats up my REVO brother!! thanks for watching!! I love this platform as you can tell, lol. I had the very first Revo that came out in 2004, and have loved it ever since. It wasn't as fast as this one, but never had any issues at all, once I removed the optidrive that is.
@jonathankuhn78374 жыл бұрын
@@hybrid32494 defenatly I just ran mine the other day and freeken loved it. Because my local hobby shop closed for carona i think ill have to order some fuel online. But anyway keep up the good content!
@kevingoodman91913 жыл бұрын
Looked so much fun on the sand
@nevermore91554 жыл бұрын
you drove it like you stole it! love it!!
@HNunyabusiness4 жыл бұрын
Damn bro. My revo 3.3 is new. Not broken in yet. What beach?
@norm12334 жыл бұрын
You should get that nitro sct in the description
@hybrid324944 жыл бұрын
hey Norm!! what's up! Ye, im highly considering getting it. I just hate running the larger .21 and up big Brock motors, cause they are thirsty. But they kick-ass ofcourse. Imagine how sick that SCT would look on the beach here, right??
@chairhappy38384 жыл бұрын
This was great, cant wait to see the repair
@hybrid324944 жыл бұрын
what's up my friend!! Let me give you a little foreshadowing, I have had to take extreme measures. I had to bake the engine in my toaster oven yestorday. Yep, I literally baked the engine on about 250 degrees for a few minutes. You will see it all soon.
@mharianangelaedrada26652 жыл бұрын
Wilmer
@TK_Mo4 жыл бұрын
All you needed to do was pull the glow plug pull it a time or 2 then repeat with WD-40 and enjoy.
@joseCalderon19764 жыл бұрын
Nice run. That was fun
@oqvirtuoso22683 жыл бұрын
I don’t know why you would tempt fate like that...
@hybrid324943 жыл бұрын
hey bro! Trust me, you got a good point! Ive ran my revo and other RCs here many times before and never flipped into the water like that. Honestly I regret it, because I treasure my stuff. But the engine was repaired and it ran just fine after.
@stevej68244 жыл бұрын
Just want to send my best wishes to you and everyone else in the New York area. Stay safe my friend.
@TheSickdon4 жыл бұрын
It probably wouldn't have sucked up water if he put the body on. But I'm no expert like this dude
@KTMcaptain4 жыл бұрын
The water from the airfilter is more than enough. It’s a really small engine.
@jos80674 жыл бұрын
Cool! But I broke my electric rc car because I played with it in sand
@hybrid324944 жыл бұрын
hey man! Sorry to hear that! The sand is hard on RC, there is no denying that. What happened? did sand get stuck in the gears and they got chewed up?
@jos80674 жыл бұрын
hybrid32494 I think I broke the esc and the gears ⚙️
@josephbeauvais86253 жыл бұрын
I got the Fs GT3B also, nice!
@pitbikecookracing33244 жыл бұрын
I had a good time watching. My traxxas Slayer pro . Has been running great. With all the work RBmods has done for me . 👊👊🔥
@aflack19762 жыл бұрын
What part of SI are you from ? I was thinking about breaking out my classic tmaxx and hpi touring road car and rebuilding it do you think it’s worth it ? Or just buy new ?
@hybrid324942 жыл бұрын
hey bro! I'm in south beach, I do videos all over SI though. Sometimes by MIdland on the Rc track too. And yes, nothing like restoring some old nitros, but ofcourse it comes down to Cost-Benefit, depending on the condition to begin with you know. Are you a member of the NitroGang FB group? I'm the admin, join, and show us all some pix and we can talk about it there bro. facebook.com/groups/410417583518109
@aflack19762 жыл бұрын
@@hybrid32494 no I’m not I’ll join , I know the tmaxx classic will cost 300 or more with the 3.3 upgrade. And a brand new revo 529$ and the Tmaxx 3.3 is 525$. I was thinking of electric also but of love the smell and sound of nitro.
@christopherdeleon21754 жыл бұрын
Nice video...i love rc nitro. I always watch your videos keep it up bro! More power to your channel...
@mariotuliolimatulio41923 жыл бұрын
A resposta desse motor, é impressionante!
@nickgraupman84574 жыл бұрын
Good old salt water In the motor
@2259alfie2 жыл бұрын
Nitro is the way to go Vato Loco 👍👍👍👍👍
@theavguytx4 жыл бұрын
Fix the rc10 engine at the same time. 😀😀 you told me to keep reminding you!!
@ronniewilliz1534 жыл бұрын
It indeed sucked it water dam man that sucks. But oil it down clean an itll run again for sure.
@fpvraver4 жыл бұрын
Expect tons of slob and to be repairing parts often in that vehicle in the near future. Traxxas vehicles are notorious for play in the first place. After driving it in the sand he may as well replace everything the speeds and revolutions per minute that those plastic parts are moving can’t handle sand in them. I might consider driving on the wet sand with an electric cheaper car but I definitely would not have the body off and I wouldn’t push it. But hey if it gets in the hundred million viet he can buy 10 of them !!!
@bashhardrc8264 жыл бұрын
Why dont you use body?
@rcsendandblast15798 ай бұрын
Hey bro I have a request. Yes I rewatch a lot of your vids. I’ll start here first. I have a Revo 3.3 that now has a 4.6 engine Forward and reverse Steele gears and more cool upgrades for the future. Can you please do a video or start looking more into vids about the Revo 3.3 transmission. I know ow there is gear sets that are full Steele kits BUT loosing reverse is not a factor I’m wanting Can you find the parts and do a video of a full Steele gear set Including forward and reverse. I know it’s possible I have the forward and reverse Steele gears. And if I find 2 last small drive gears I’ll have a full Steel set with reverse. Hoping to see this come to light. I’m doing this mod and I hope more people do it also. 👊😎🙏😊
@AnthonyGman4 жыл бұрын
Great video
@J05hKr0W3 жыл бұрын
Not in the water and he drives in the water. . .uhhh
@nomusicrc4 жыл бұрын
What is occupy and rc Thank you for saying MY FAULT and not my bad I always knew you were smart
@hybrid324944 жыл бұрын
whats up Steve! Yes dude, I studied alot of English grammar back in elementary school. I wasn't born here, So I actually learned English the right way, through proper grammar. Anyway, I started using the phrase "OCCUPY and RC" as a satirical jab at the Occupy Wall street movement and since cops kept kicking me out of everywhere. So OCCUPY & RC was born.
@Mitz5004 жыл бұрын
i would have put tmaxx cheveron tires on it for sand.
@ASmallPoop4 жыл бұрын
coronavirus edition and then became the revo survival edition lol, awesome channel!
@hybrid324944 жыл бұрын
haha, thats right my dude. Currently it's got a seized motor, IDK why, but I still have not looked it over, I'm thinking some serious mechanical failure. Will get to it eventually though.
@jameshankssr4664 жыл бұрын
Take the motor apart and get that salt water out or its gonna ruin your crank bearings
@LukesVintageRC4 жыл бұрын
Oh man that’s awesome 👊
@peterrcbasher4 жыл бұрын
Awesome!
@Nerm784 жыл бұрын
Great video but don't be running around licking stuff man! Stick to Domino's and Wendy's! I finally got my Redcat gas tank! I just have to get the rubber grommet out without destroying it now!
@hybrid324944 жыл бұрын
hahaha, hey my homie!! more pizza in the next video, don't worry. The pizza will never end!! Anyway, you ever watch that show "top Gear" The one where they drove the old Toyota Pickup into the ocean and it still ran after repairs, will this is gonna happen here soon.
@Nerm784 жыл бұрын
@@hybrid32494 lol yup I love the old Top Gear!
@hybrid324944 жыл бұрын
I'm the Jeremy Clark of top gear, without the punching people while drunk part, lol. You remember that?
@Nerm784 жыл бұрын
@@hybrid32494 lol no! I never heard that. Now I have to look it up!
@hybrid324944 жыл бұрын
look it up yes. He got fired for it from the BBC. He punched a dude cause he was hungry and drunk, ahahaha.
@jfleser884 жыл бұрын
That's why you run with a body.
@elite82454 жыл бұрын
This guy says corona virus way to much
@usmcesu63 жыл бұрын
Your too funny.
@hybrid324943 жыл бұрын
hey my dude! LOL, glad you liked the video. Nitro will never die on this channel, because it's fun and you cannot kill it! Btw, this revo was eventually cleaned and repaired, engine ran fine after.
@johnholliday17963 жыл бұрын
Niko Bellik
@philthyco14 жыл бұрын
Idiots licking stuff for views SMH..If that was an electric rig you would still be driving right now..Just saying lol
@hybrid324944 жыл бұрын
hey bro!! Yup, the electrics don't care, no denying that. This is why I never took the revo to the beach so far, anyways, that damn cartwheel flip was just unfortunate timing.
@philthyco14 жыл бұрын
@@hybrid32494 Stuff happens in the RC world my brotha! The guy that licks the subway is an idiot! Doesn't matter if he gets thousands of subs lol
@chardison60264 жыл бұрын
Damn lol you really need to soak it in wd40 now
@kayleeh81403 жыл бұрын
F masks also your rc kicks azz
@hybrid324943 жыл бұрын
hey!! thanks for watching, YUP, this thing is pretty sick, no denying that! This is why I run Nitro, cause it's the SHYT!! Anyway, check out my newer RC vids, you're going to love them! I stand up to the electric guys and take them out with my nitros!.
@raymonddejesus39334 жыл бұрын
Talking toooo much
@hybrid324944 жыл бұрын
Hey man! Thanks for watching! I'm sorry I didn't take it to the skate park and yell nonstop with predictable chassis bending results. I run my stuff with respect for this hobby and take responsibility when I break it. Anyway the next video is 75% talking and 25% driving. JK.
@jameshankssr4664 жыл бұрын
The salt in that sand is gonna Corrode anything metal on that thing clean it good and wd40 everything
@cyclicracer4 жыл бұрын
wd40 hell no
@hallaballa94513 жыл бұрын
@@cyclicracer WD40 hell yes
@randomstuffno1caresabout34 жыл бұрын
Nice vid bro love your channel im 13 and i got a revo for christmas its my first nitro but i finally got it ran in becs the weather has been terrible where i live but its awesome.
@hybrid324944 жыл бұрын
hey dude! Welcome to the NItroGang!! Congrats on the revo dude!! Great RC. you have the 3.3 model? I have 2 3.3 models myself.
@just_j0e4 жыл бұрын
Holy you got a revo for christmas my first rc was bought after i was born my dad played with it and the gave it to me but a revo for christmas is a good gift have fun dude
@DavidJones-xp2sh4 жыл бұрын
I like the revo and tmaxx videos 👍
@rc_teo_nade_2163 жыл бұрын
Hey hybrid I am rewatching this video because mine bended a shockshaft and I am waiting to get the spares and then fix my tmaxx 3.3 that needs a front bearing on that 3.3 and my nitro sport that also I upgraded to a 3.3 but it also needs a front bearing
@hybrid324943 жыл бұрын
whats going my dude! I'm glad you're rewatching this video because the 18TZ update video with special shoutouts to you is being edited right now . I'll also be putting in some of the main important clips from this video to update everybody. Anyway, be happy you're working on Traxxas nitros, because at least there are are plenty of cheap parts for them. Now imagine you were trying to fix n old KYOSHO, you're be DONE for! Just like me basically. Cant get anything for my kyosho FOXX 2.0.
@mraudioiscool4 жыл бұрын
To good ! This is one of your best RC videos ! btw where is the food in you intro ?
@hybrid324944 жыл бұрын
hey bro!! thanks! I took alot of risks in this video, and it got me licking the damn nitro engine, lol. anyway, it's safe to lick, unlike toilet seats. I forgot to include the pizza I had, it'll prob be in the next video. lol
@k00LGuY6714 жыл бұрын
running my rc in the beach near the water just to have fun. Hey it's a risk i'm willing to take, how can it be fun if I can't take apart my nitro and rebuild it. hehe
@hybrid324944 жыл бұрын
hey bro!! Awesome, you're not scared of the Nitro Beach life! This was my first water related accident honestly, I guess it was just too a bad combination of factors that made this happen to me. I repaired it after and it was fine. NitroGANG!!
@k00LGuY6714 жыл бұрын
@@hybrid32494 I've only been in nitro for a year. I watched countless videos on nitros, tuning, maintenance, breaking in, etc. I'm currently racing in my local rc race events held weekly. Learning the ropes on tight controls from the pro nitro racers. The majority of the rc guys here are mostly crawlers. Rock crawling, no offense is pretty cool in a scale realistic all terrain way. But nitro speed and the sound and smell of the engine. It's hard to go back to electric.
@Sloppyjoe964 жыл бұрын
what would you think of trying to fabricate a snorkel and give the ocean round 2 lol
@hybrid324944 жыл бұрын
hey bro!! Glad you got to watch this. So the engine it seized any hydro locked. But no big deal, I will figure out how to fix it. This revo will not die!! If I just did not do that cartwheel flip at the end, it would have been fine. Yes, there are special breather air filters with covers, ive seen them. Wonder how effective they are.
@Sloppyjoe964 жыл бұрын
hybrid32494 you could probably just clean out the bottom end with wd40 and then put after run oil in it before it rusts
@hybrid324944 жыл бұрын
here is an update for you, you will see me baking this engine in a toaster oven in the next few videos. This is a last resort type of situation. No joke here, some classic old school nitro methods bro. WD-40 did squat here, it don' fix salt water damage apparently.
@islandrc-duke19724 жыл бұрын
cool video and great run at the beach
@hybrid324944 жыл бұрын
thank my dude! Too bad it sucked in all that water before I could get some FPV footage from the revo itself, that was my plan. But next time!!
@islandrc-duke19724 жыл бұрын
@@hybrid32494 it was just thirsty...lol
@RCkerenmobilan19884 жыл бұрын
this is amazing brother...
@hybrid324944 жыл бұрын
hey dude!! thanks for watching. I'm currently paying the price for my water run. Let me put it this way, in the next videos you will see me baking the engine in the over, I'm to kidding!!!
@RCkerenmobilan19884 жыл бұрын
no problem .. I'm happy to watch .. I'll wait for the video🤗🤗😎😎👍👍👍
@luisrosario11124 жыл бұрын
Hi brother, I need help from you. I got a Traxxas Tmax and I have a problem that when I accelerate the engine is heard going up high in revolutions but the truck does not run with force (it does not have any torque), could you help me with that? Thank you very much, I am a big fan of yours !!
@hybrid324944 жыл бұрын
hey my dude! Thanks for watching. Lets see what we got. Can you tell if the 2-speed is shifting or not? First, check your slipper clutch nut which is on the spur gear shaft, make sure it's tight enough. Also it could be that your engine is very rich and it's just not getting the higher RPM range as it should. Try to turn the high speed needle clockwise (leaner) about 1/8 of a turn at a time, and give it a few passes. If your engine responds to the carb adjustments then you know it's too rich and getting too much fuel. Try these things, let me know, I'll respond back to you.
@luisrosario11124 жыл бұрын
@@hybrid32494 ok thanks for the advice, I will checks on those things and let you know. 👍👍😊
@luisrosario11124 жыл бұрын
Sorry, yeah its two speed and is not shifting.
@luisrosario11124 жыл бұрын
@@hybrid32494 thanksss bro, the Truck is running good, like you said the spur gear shaft wasn't enough tighten. You are the Nitro guru 😁😁👍💪
@malo_21394 жыл бұрын
Do you have a LST2 ...if so make videos on it!
@hybrid324944 жыл бұрын
hey bro! Unfortunately not, I've been shopping for a moderately priced one for a while now. I will start doing a better job and hopefully get one.
@malo_21394 жыл бұрын
hybrid32494 My LST2 has been good to me been having over 13 years and still runs great!
@rabbitfootedkitty13394 жыл бұрын
I mean, you could have just taken the glow plug out at the beach to get the water out...
@paulallen-014 жыл бұрын
I have a .30 OS on my Tmaxx and that engine RIPS!! I’ve hit speeds of 50mph with the stock gearing setup
@just_j0e4 жыл бұрын
Man i really want to play with my old revo 3.3 but the threads on the cooling block that hold the glow plug in are done and a new block cost like 60 bucks saving up for one after this vid for sure keep up the good work
@hybrid324944 жыл бұрын
hey buddy! what's up. It sound like you don't need a whole new engine block, you only need the cooling head. The glow plug the 3.3 threads directly into the cooling head. It's an easy fix. Make sure to run the glow plug brass washer in the future, it should prevent stripping the threads some.
@mharianangelaedrada26652 жыл бұрын
Wilmer Double Girl in Remote control mortality and diliman
@ryanthomas10994 жыл бұрын
Great car, I agree. Tell you what I loved though was the Tamiya TNX, that was a beast in the day. I adored mine.
@hybrid324944 жыл бұрын
whats up my guy!! Dude, I own an original Terra crusher, you know the one with the FRAT trans right before the TNX. Anyway, check out my channel you will see 2 awesome vids on my restoration and pickup of the terra crusher, I still have it too. I've been shopping for a TNX myself too. Hope you get a chance to watch them, all my vids are very detailed cause I truly like the nitros I buy.
@biged17034 жыл бұрын
Really enjoyed the video. 👍 One fast nitro! Hope you find something good to eat. 🤣
@hybrid324944 жыл бұрын
thanks dude! Im about to head down the engine and remove the salt water. That was purely my fault. But I will get it back and running soon, lets hope!!
@rawlemonsaregood25393 жыл бұрын
the jato 3.3 has a top of 65 I got mine to do like 68
@camaroboy3834 жыл бұрын
good blast man! should have just pulled the plug and pulled it over to clear the water out..cycle some fuel through it the same way.. could have kept running..👍 looked like fun though.. subbed! 🤟
@hybrid324944 жыл бұрын
hey dude! welcome to my channel, really happy you liked this video. I usually never destroy my stuff, this was an unfortunate accident. Anyway, I'll give you a small update, I am currently baking the engine in the oven, can you guess why? lol. I'll be in the next few vids. I do it for the NitroGang!! ahaha.
@camaroboy3834 жыл бұрын
@@hybrid32494 thanks man, glad to be here and help the rc community out! well there is only two reasons to heat the case.. 1) pull the sleeve 2) pull the crank bearings.. could have definitely been avoided with some atf, after run, or wd40 cycled through.. 👍 i ran nitro outboard boats in namba for years! water is no big deal if cleaned out properly...🤟 we would pickle the engines in atf after the days races! and typically changed out crank bearings every half gallon.. bearings are cheaper than a scored sleeve and piston, along with a peppered head button..👍 if you want that engine to really scream raise the port timing in the sleeve and increase the induction window closing side.. raising port timing and increasing induction numbers will allow the engine to rev higher, possibly stepping up on the pipe a second stage.. although pipe length from the converging side may need to be shortened or lengthened to get it to double stage.. 🤟🤟🤟🤟👍👍👍 bubble volume in the .17cc range with a squish angle of 1.5* .008" head space and 30% nitro or higher..😎 ya, i kinda know a little about nitro..🤪 hard to see but that looks like a .18tz?
@hybrid324944 жыл бұрын
LOL, yes know know a thing of 10 about engines! I agree, ahah. Welcome to the Gang!! Anyway, I purposely waited 2 days to repair it because it wold give the viewers a good idea of how quickly salt water will damage and seize up an engine. And trust me, I didn't think it would need to go in the oven, lol. And yes, that is the OS 18 TZ, my favorite motor.
@camaroboy3834 жыл бұрын
@@hybrid32494 good luck with it brother! you can clean it up quite nicely if you let all the metal parts sit in a crock pot on low submerged in concentrated antifreeze (glycol) .. the aluminum will look brand new👍👍 hopefully the crank isnt to far gone...
@einarruthstromfredriksson71554 жыл бұрын
Sick intro man!!
@cnnlt2004 жыл бұрын
Nitro plus salt water. Rust xxxxxxl😂
@theirishaxe94054 жыл бұрын
You should run your mgt nitro
@limited50scla4 жыл бұрын
Nice beach bashing’s
@TargetingXmod_RC4 жыл бұрын
Always fun driving the rc's at the beach! Do that all the time i can! :P Thanks for video!
@baymobbrcclub74264 жыл бұрын
Whens traxxas coming out with a new nitro?or a 1/5 revo
@hybrid324944 жыл бұрын
what up dude, Lemme Poll the Audience on this one!! Audience says 95% chance, never, lol. Thats why we gotta keep our old Traxxas Revos and T-maxxs alive my dude. JK. Thanks for watching, and BTW im about to take the engine out of the oven after it's bake session, literally. Went a few rounds in the oven to unsized it.
@cwatson427854 жыл бұрын
Great beach bash bro!! LipoGang is waiting on that 3s senton unboxing/first run!!
@soblessed64384 жыл бұрын
Fantastic video! 👍So much fun to watch. It has to be a blast running that on the beach. 😀
@beastrcrc33184 жыл бұрын
Where is the Raminator .... on the "shovels"?))))) To drive along the sand.)))