Hydraulic Jack O-ring repair, Oil Fill & how to Bleed! Easy

[@ConsciousCloud]

Thank you so much man. I got this same jack that I only used once 3yrs ago and went over to my sister's house a few days ago to replace her flat tire with her spare only to discover it wouldn't budge or lift anything. Turns out the oil leaked out completely and here I thought I had to shell out $100+ for another one. I also couldn't figure out how to get the oil plug out and yours is the only video I found that showed that. Thanks again!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@roberey6821]

man you killed the cylinder shaft with those vise crips.

[@John.Skelton]

THAT WAS AWESOME!👏 I COULDN'T FOR THE LIFE OF ME FIGURE OUT WHAT WAS GOING ON WITH MY JACK!🤷🏻‍♂️ I ADDED OIL, TIGHTEN THE BLEEDER, ECT!😤 IT WAS THE O-RING UNDER THE HANDLE JUST LIKE YOU SHOWED US!🤦🏻‍♂️ SO THANK YOU!🤘

[@Flashback502]

Your very welcome

[@miguelramirez4812]

Someone gave me the same Jack from this video thinking it was no longer working because it was losing all the oil, thanks to your advice I fixed it, I just needed to change the O-ring, now it works perfectly as if it were new

[@Flashback502]

You're very welcome! Glad I could help. Please subscribe like and share and check out our other helpfull videos

[@LifcoHydraulics]

Hydraulics come in all sizes. We deal with the big cylinders, but these are also just as mighty! Love the channel

[@Flashback502]

Agree, thanks for comment glad u fine channel helpfull

[@SEGAraid]

Straight to the point and no F'in around. My kinda dude. Very informative, thanks.

[@Flashback502]

Your welcome

[@YouTubeDon245]

Thanks so much bro, thought I was throwing this one in the garbage until l stumbled up on your video and now it's good as new.

[@Flashback502]

You're very welcome! Glad I could help. Please subscribe like and share and check out our other helpfull videos

[@sourbrothers73]

You can also unscrew that bung instead of marring that piston with vice grips. The whole thing comes out and you can tap it out gently. I think it's like 17mm

[@Flashback502]

Thanks for helpful tip.Please subscribe & like and share if haven't already and check out our other helpful videos

[@a.c.king-dk5yl1ep2m]

Great! I have a similar old trolley jack (2 ton MVP from Northern Tool ) that had stopped lifting. I was just going to toss it and go buy a new one until I saw this video. You just saved me about $40 bucks. Thanks!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@siddiqmasih533]

Sir I act upon your advice. And I fixed my jack. Thank you very much for helping me through your video. God bless you.

[@Flashback502]

Your welcome glad could help please subscribe like and share and check out our other helpfull videos.

[@Frederick-sg2dc]

You saved my jack headed for dumpster. I was able to fix my floor jack for .47 cents. Where the plunger or small piston goes in mine had a small ball bearing at the base.

[@Flashback502]

Glad to hear

[@garpikemike1]

Finally a jack repair video that isnt actually a video telling you how to put oil in it. Thank you Sir.

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@28282222]

Thanks for the vid and here is something you or no one will believe. I just disassembled by craftsman 2 1/2 ton floor Jack that has always been leaking a little. Yet lately it’s been losing lifting power and leaking more. I bought it new about 20 years ago and used it a lot. It has NO O ring! Amazing it even worked at all. I’m guessing someone in China left it out by accident and quality control was non-existent. I’ve got a few older never used O rings so hopefully 1 will work. Even if it’s a little dry rotted it should do a LOT better. LOL. I will try and post an image or link.

[@Flashback502]

Wow yea that's not good hope u get it fixed. Please subscribe like and share 🙏.

[@teddydaniels]

Best jack repair video. The pace, the presentation. That was excellent!😊

[@Flashback502]

Your welcome glad could help

[@abidbandi5678]

You are genius my buddy I like your explanation I am an Indian guy and my name is Abid Bandi may almighty bless you and your family

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@sandysue202]

Thanks for this! I need a video that goes into detail since I have not ever done this and have 2 jacks that need this entire process done. One is pretty old, so we shall see if I can get it working again! Appreciate you!!

[@Flashback502]

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

[@mzhu4697]

Thanks for the tips. I have no leak. Bleeding fixed my problem.

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@bomark2002]

Ima try to fix mine tomorrow doing the same thing, I’m going to see if I can remove the bleeder plug to relieve that pin pressure before pulling it out, if i can’t then I’ll leave the head on the pin then try to pry it up and out, awesome video bro I hope i can fix mine

[@Flashback502]

Your welcome

[@antaklugom7389]

you cannot use a Vice Grip Plier on the Pump plunger....! You are damaging its Smooth wall and the Pumping capacity will be reduced. The Scarring on the plunger will finally damage the Oil Seal too.

[@RandyWBrown]

Thank you very much sir,very helpful as I have 3 of these type Jack's and they've all decided to either not work at all or just barely lift a couple of inches. P.S. you might be wise to put a rag or something between the vise grips and the lift piston. Thanks again

[@Flashback502]

Your welcome thanks for tip

[@coffeemakir1977]

Recently refilled my Jack and realized the o-ring was leaking. This videos covers it all 👏

[@Flashback502]

Your welcome glad could help thanks for commenting. please subscribe like and share and check our my other helpfull videos.

[@Roach8431D2]

Usually, I'll have to go through a couple of tutorials to find the correct instructions. Not this time. Thank you for making the time to help others!! 🙏

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@aratneerg3699]

If u have lost lots of oil, you want to top it up and bleed it too. Loads of good videos show how to do it. I'd personally put the vice grips around a rag to not damage the poston.

[@Flashback502]

Thanks for the tip. Please subscribe like and share and check out our other helpful videos.

[@chall242]

This is an excellent video! You are a natural teacher. 🙂🙂🙂

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@Hamaheshd]

Thanks 🙏 very much for sharing this video with process of how to fix the hydraulic jack. I have done replaced the o ring but it still doesn’t work. Is there some other reason why it doesn’t work sir? Thanks 🙏 again for sharing the video sir.

[@Flashback502]

If you added hydraulic fluid and replaced the o ring, you probably have a internal issue or a leak. I would just buy a new one, it's not worth the risk of it failing under the weight of a vehicle. Please like subscribe and share.

[@warrenosborne1748]

Man I took this back to AutoZone I had paid $80 for it, on sale. They said 1 warranty was out. I knew 100% it was like only 8 months. No arguing with those fools, no help. Your vid got my jack back in order. Maybe these harbor freight seals will work better than the ones that janky duralast used. Thanks for saving me at least a Benni I only ended up paying pennies

[@Flashback502]

Your very welcome, Thanks for watching and commenting yea HF has pretty good parts. glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@norasunux2674]

Thank you so much i saw this video and help my husband fix the jack it work

[@Flashback502]

You're very welcome glad could help

[@rpoL98]

replaced a #7 o-ring on my 30 year old transmission jack. damn! now it works great, saved me $500. awesome. Thanks!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@wollgart]

Best jack video ever. Clear, concise, no nonsense video w 100% attention on the viewer! Thank you Bro ! ! !

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@rafaelanguiano4853]

Thank you very much for this video…I just fixed a jack that was sold to me from offer up and wasn’t told it was broken.

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@timmckenna210]

Helped me solve my problem with my jack,thanks.

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@thanhma3141]

Thanks for the great video. I have the same exact jack. When pumping up, the oil leaks out from the 3/4in screw, not from the piston. Any idea how to fix it?

[@Flashback502]

Whole may be stripped, I would replace jack to be safe. please like subscribe and share and check out our other helpfull videos

[@mumbucorporation7243]

Jack says: thanks mate for sharing your experience

[@Flashback502]

Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@ezwa9979]

I have that same jack & mine says drain the air by flexing that ruber oil filer plug to the side😐 gud viDO thO, I didNt know that's where you filled thE oil, thNQ🖐️

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@tricyclemishap]

Well earned thumbs up from me. Your instructions worked like a charm. Now my hydraulic floor jack is working just like before. Thank you, sir!

[@Flashback502]

Thanks for 👍Your welcome, Thanks for watching and commenting glad could help.

[@murraysherriffs4862]

Good teacher; clear, concise...

[@Flashback502]

Thanks for comment, glad you found video very helpful👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@tzavitz]

when you popped the pin out that has the o-ring on it....why didn't you loosen the bushing nut on the bottom and just remove that? I'm just curious....never done this before

[@carreranlehu]

Excellent sir. I have a question. Can the jack get in air if the rubber plug has a pin hole?

[@Flashback502]

Yes it can cause a problem on some models, just put some super glue or silicone in. The hole. Please subscribe & like and share if haven't already and check out our other helpful videos

[@hapetaa]

Very good informative video, thanks for posting.

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@KameronKinser]

Thank you!! This video helped tremendously!!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@condor5635]

Good video however you should never use vise grips on smooth hydraulic pistons that are smooth for a reason. They mate against other o-ring seals and scaring them will essentially ruin them.

[@Flashback502]

Thanks for info. Glad could help Please subscribe like and share 🙏.and check out our other helpfull videos.

[@xjyrki]

Very useful, thank you!

[@gantmj]

This answered my question about what o ring to get. Autozone still sells that same "Needa" assortment. 👍

[@Flashback502]

Yea I just brought the assortment and found 1 that fit. Please subscribe & like and share if haven't already and check out our other helpful videos

[@mark1952able]

Cool! Good instructions! I subscribed after watching it. Appreciate the help man....Thumbs up!

[@Flashback502]

Your very welcome thanks for sub 👍 glad could help.

[@johnjkizer6399]

Thank you very much brother, God bless

[@Flashback502]

Your very welcome glad could help. Thanks for commenting hope you check out the rest of our channel and sub

[@anthonym.3608]

Great information! Im a subscriber now! Thanks sir!

[@Flashback502]

Thanks for sub.

[@steveiliev8912]

Thanks man 🙂 👋 Thanks to You, I have fixed my jack! 👋

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@souk-tv]

I undone the two screws and one ball bearing and one spring fell out. Not sure which hole the spring and bearing comes out off. Fyi I'm referring to the twist to release the jack screw and the screw with the do not remove cap on. (Not talking about the rubber filler bit). I was trying to get as much old fluid out as possible. I think the bearing goes on the twist to release screw as the screw has a simple on the button of it, and I thought the spring went under the do not remove screw but again who knows, all I know is that it's not working at all now.

[@Sandokans]

I learn allot. Thanks

[@Flashback502]

Glad could help

[@abavoralbert6381]

Hi brother I thank you for your show about how to repair the hydraulic jack. I have one and its leaking and I go round to look for O~ring but I can find one. I am living in Italy please help me to get O-ring set no problem for money for the bill of postage fees thanks. I hope to hear from you Shalom. Thanks

[@Flashback502]

Check your local auto parts store should have a kit, or order online from auto zone.

[@newttella1043]

Thank you! Nicely explained.

[@leethatsme1988]

I just had a go at replacing my o rings on the piston and pressure release screw. They are no longer leaking but my jack still doing the exact same thing only goes up a few pumps then stops. I think the hydraulic as gone.

[@Flashback502]

Yes I would replace jack not worth the risk of it failing with a car on it. Please subscribe like and share 🙏.

[@javieracevedo9352]

What is the flathead screw next to the pumper next to for? My jack has the same screw.

[@EPHONIC]

Awesome! You helped me so much. Boosted my confidence and now I’m going to find people who think their jacks are busted and repair and sell. Hahaha.

[@Flashback502]

Lol Your very welcome glad could help.

[@st.courts9593]

Got the same one Preciate it!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@garyfrankel9457]

Excellent video. Thanks a lot.

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@julianlangdon3456]

Thank You, that's my Jack repaired and good for a while longer. Principle much the same to repair my Engine Hoist?

[@Flashback502]

A little different but pretty much the same. Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@jimcapelli1431]

My Pro lift model # G-2593 3 ton jack raises up fine, but won't hold a load. Do you think it needs a total main cylinder rebuild, or just one of the easier to replace o rings? I already tried adding oil and bleeding it. It does seem to leak fluid out of somewhere, but not on top. Please advise.

[@Flashback502]

Sorry not sure, but would replace o ring and see if fixes your problem. Please subscribe like and share 🙏.

[@astromann7449]

A little stop leak might help too.

[@Flashback502]

Thanks for tip👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@ericagabaldon3401]

Hey dude how did you get the cap and clip claw back on mine came out and i can't put the simple part back 😂

[@TheSkeptic000]

Very helpful!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@albertgallegos9938]

Excellent Video, very well explained!!!!

[@Flashback502]

Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@aaron4376]

THANK YOU, T about 5:40 thats what i am trying to find, i "winged how to fill it, put too much in, and that POPED and hit me in the head lol. Then had to rinse my eyes. Lol i am ok. *time to find WALDO that cheeky ninja dude.

[@Flashback502]

Glad you're OK. Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@dadboddamien]

How the heck do you get that plug back in? Mine is being a pain in the neck

[@metalmaniak2011]

thanks bro. very helpful video

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@romerogiovanni7]

This video helped me out a lot, thank you!

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@kophaziistvan6477]

Nice video, thank you

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@ferdinandstefancsik9703]

and if someone messed up that dont touch screw on jack how is/ if is fixable? many thanks in advance

[@Flashback502]

I would replace it not worth the risk. Please subscribe like and share 🙏.

[@brianelliot2719]

Thanks!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@aakashyadav998]

hey bro, my jack doesnt even lift a bit, with pressure, and by pressure i mean even the spring at the side, and if i remove the spring it works properly, what is the issue, can you guide me. on how to fix it.

[@Flashback502]

Sorry but not sure of the problem with your jack, if it's acting bad like you say I would get a different 1, wouldn't want it to give out with a car on it. Safety first. Please subscribe & like and share if haven't already and check out our other helpful videos

[@FerminelHacker]

This is excellent... Thank you so much...

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@kieranpower5916]

good job desmond in ireland

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@amandeepthakur1524]

I have the same jack, but the value is leaking fluid ?? What should I do ?

[@DaveWebb]

Nice guide. Thanks for the vid, man 👍

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@nightwolf2414]

I changed the same o-ring that you did and i even bled ths jack, the arm that lifts doesnt even move when i pump it.....oil is toped up, the valve is closed and it doesnt even move....what could be wrong with the jack?

[@Flashback502]

Sounds like some of your internal parts are bad.

[@NeoEletto24]

Thanks a lot for the video! Very useful for me!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@dasteufelhund]

NOICE! HIGH FIVE FROM NYC

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@tonycervantes4816]

How you put of plug back sr .. ?

[@Flashback502]

Some screw and Some you have to push back in. Please subscribe & like and share if haven't already and check out our other helpful videos

[@GregSmith-jd7zm]

Can anyone tell me what the diameter of the O-ring is?

[@omarsharif6702]

Very useful. Thank you for sharing!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@jtolen4275]

There's another "screw' at the right side of that piston you are taking off. What is that for?

[@ronenfe]

you need to replace the o ring of the valve too.

[@ProfessionalDad]

How bout when the pump handle gets stuck down & won’t pump back up?

[@smid2550]

Enjoyed the video, but please don't put vice grips on the piston -

[@Flashback502]

Thanks for tip, Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@LoveLikeaHurricane]

where did you get that o ring kit?

[@Flashback502]

Kit came from AutoZone. Please subscribe & like and share if haven't already and check out our other helpful videos

[@abdullahkucuk]

I have the same jack but release button is broken how to fix ? Is anyone know how to fix it thank you 🙏 much

[@eduardotomaslagosmolina5271]

Hi! How many steel spheres ( valves) does that jack have? I think I lose some! Do you know its dimensions ? Thanks!

[@franciscocruz4228]

Were can I get the ‘o’rings

[@Flashback502]

You can get a multi pack at AutoZone or O'Reilly's. Please subscribe & like and share if haven't already and check out our other helpful videos

[@rusticobintero5498]

Can you use brake fluid as jack oil?

[@Flashback502]

No, I would use jack oil. Please subscribe & like and share if haven't already and check out our other helpful videos

[@jimanders6666]

thanks so much ! The natural tendency is to trash your old jack and go buy a new one.

[@Flashback502]

So true. Your very welcome glad could help. Thanks for commenting hope you check out the rest of our channel and sub

[@boyscout-p3u]

how to tell what viscosity oil it needs

[@arontesfay2520]

If anybody needs O-rings for the piston and the release valve, HMU and I'll send them to you in a regular envelope. You can pay me a trivial amount if you want. I don't care. I got a 50 pack of each from Grainger so I know I'll never use even one tenth of them. I'll send you as many as you want.

[@ronenfe]

can i put motorcycle fork oil?

[@Flashback502]

Sorry I'm not sure.

[@niltonsilvia7496]

Video muito bom. Parabéns 👏👏

[@lando5101]

Thanks

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@ultramanxk7]

👍

[@RVela-tn1th]

Great video. Thanks.

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@ewwchoob7122]

Thank you for this video Sir; you are legend.

[@Flashback502]

Lol Your very welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@Theephilliestzee]

Big ups to you bwoy

[@Flashback502]

Your very welcome glad could help. Thanks for commenting hope you check out the rest of our channel and sub

[@getit4cheap28]

Thanks just save my some cash👍👍👍

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos