HYDRO-DIPPED Dash Trim Upgrade MOD by J.H Hydros | MK2 Leon Interior

  Рет қаралды 14,074

North Coast Workshop

North Coast Workshop

Күн бұрын

Пікірлер: 45
@NorthCoastWorkshop
@NorthCoastWorkshop 9 ай бұрын
To subscribe to my Free Monthly Car content Newsletter, and gain access to the Completed Job cards, click the link ▶ northcoastworkshop.com/freestuff
@HimiJ
@HimiJ 3 жыл бұрын
Finish was really nice 😍
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
Cheers mate 👍🏻 I was really pleased with the final result on it 👌🏻
@davidhicks433
@davidhicks433 5 ай бұрын
Great video. New trim looks superb! Do you have a video showing how to remove the drivers side lower trim in a Mk2 Leon? I have suspected failed door blend actuator that I'd like to investigate.
@NorthCoastWorkshop
@NorthCoastWorkshop 5 ай бұрын
Hey David, cheers for watching. Yeah really pleased with how the trim looks. I now have a steering wheel to match as well. Do you mean the plastic trim strip thats across the handle/middle of the door card? There's a small cut out on the far right hand bottom edge. Pop a wee plastic trim removal tool in there and gently prise it up and work ur way along carefully. If it's the large inner triangular trim insert above that piece u want to remove, once the plastic strip is out the way, you can grab the lower left corner of the insert, lift it up and prise it away. These bits can be tricky if it's never been off before, a bit of brute force needed 💪🏻😂 Hope that helps 👍🏻
@themechanicalwizard5916
@themechanicalwizard5916 3 жыл бұрын
Santa got a brand new carbon wrap 😂😂👌
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
😂😂😂 yeah, didn't realise I had even done it until editing 🙈 merry Christmas all 👋🏻🎅
@antonioavalos2963
@antonioavalos2963 2 жыл бұрын
Nice video buddy , best regards from Mexico
@NorthCoastWorkshop
@NorthCoastWorkshop 2 жыл бұрын
Ah thank you 😁 thank you for watching, and best regards from the UK 👍🏻
@toninhotlou4560
@toninhotlou4560 Жыл бұрын
looked great one question is the tablier and the door panels hard plastic or soft to the touch?
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Cheers 👍🏻 One part of the door panel, the inner curved piece is soft to the touch but everything else on the doors is hard scratchy plastic
@toninhotlou4560
@toninhotlou4560 Жыл бұрын
@@NorthCoastWorkshop and what about the tablier?
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Sorry I'm not sure what u mean by tablier?
@toninhotlou4560
@toninhotlou4560 Жыл бұрын
@@NorthCoastWorkshop sorry i mean dashboard hahaha
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Ah, the top of it is every so slightly soft, and the bottom half is hard plastic 👍🏻
@Harini.vazhvethavam
@Harini.vazhvethavam 3 жыл бұрын
Thank you for sharing bro 🙏🏽🙏🏽🙏🏽
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
Ur welcome
@Harini.vazhvethavam
@Harini.vazhvethavam 3 жыл бұрын
@@NorthCoastWorkshop please update a video how to warping
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
@@Harini.vazhvethavam do you mean wrap, as in wrapping something in sticky vinyl? Hoping to do a video on something like that soon 👍🏻
@Harini.vazhvethavam
@Harini.vazhvethavam 3 жыл бұрын
@@NorthCoastWorkshop thanks bro I’m living in Germany maybe spelling mistakes 😂😂😂
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
@@Harini.vazhvethavam 😂 no problem at all, your English is better than my German 😂
@druss841
@druss841 3 жыл бұрын
Great wee video mate definitely gonna subscribe used JH hydros for my carbon dipped mirror caps love them really good quality job and the shine on the stuff is amazing im looking at doing this in future but im unsure
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
Just depends on the look you're going for, and possibly in extreme sunny weather there'll be a good bit of reflection from the gloss, but I'm in the far north, so sun doesn't visit here often!😂 I love the transformation though!👍🏻 I've carbon mirror caps to go on too, but waiting to fix my dodgy folding mirror 1st (another vid🙈) Thank you for subscribing and dropping a comment 😊👍🏻
@druss841
@druss841 3 жыл бұрын
@@NorthCoastWorkshop so i saw on map im in perth so i see rain more than sun you could say 😂😂😂 but i have a black leon 1.6tdi 2012 absolutely love it its my second car ive owned and i spoke to josh and he can do colour in the carbon so that has definitely tempted me a little 😂😂 but his prices are really good for the quality of the work
@NorthCoastWorkshop
@NorthCoastWorkshop 3 жыл бұрын
Yeah he is very reasonable, and I have seen the colour elements too, look v nice. Tbh all of his work, outrageous or not, looks awesome! If ur on insta (I might already follow you) pop some pics through to me whenever 👍🏻
@jakegray3448
@jakegray3448 2 жыл бұрын
Where did you get it done mats and how much this is epic I'm like a massive Leon head had loads I'm doing this also do star light roof £50 Amazon 300 fiber optics
@NorthCoastWorkshop
@NorthCoastWorkshop 2 жыл бұрын
Hey mate, I had the dash done from a guy called Josh, he has a company JH hydro's and he can hydrodip pretty much anything in loads of different designs. Give him a shout on his Facebook page, u can check out his previous work there too 👍🏻 😁 (link below) facebook.com/JH-Hydros-107382317676090/
@L3MZ__
@L3MZ__ Жыл бұрын
Is it possible wrapping it without taking any bits off?
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Wrapping it with vinyl?? Yeah I'd recommend taking the trim off 1st so you can get it around the edges properly. I imagine it'd be quite fiddly working on it while it's on the dash.
@anestis778
@anestis778 Жыл бұрын
Hello, I saw you have some sort of green clips around the first trim you pulled off, could you tell me were I can find them because my trim doesnt lock properly, thank you and very nice car.
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Hi, thank you, and as for the small clips I'm not sure where u can get them from. Mine have always been there from factory, and yes they hold in the trim firmly. A Seat car dealership may be able to help you with sourcing them? I wouldn't even know what to call them to search for on the internet, sorry.
@anestis778
@anestis778 Жыл бұрын
@@NorthCoastWorkshop Okay then, thank you .
@gergotaraczkozi98
@gergotaraczkozi98 Жыл бұрын
Hello, good video! Could you help me, what size torx screwdriver did you use to take off the Dash Trim? Thanks!
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Hey Grego, sorry for the late reply. It was a T25 torx bit I used, cheers for watching 👍🏻
@gust4pr0
@gust4pr0 Жыл бұрын
Hi!, this trim pack can only obtain in UK? thx
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
JH Hydros is based in the UK, yes. If you cover delivery costs I'm sure he'd do it for you, but I imagine shipping/delivery costs would be expensive 💰💰💰😬
@northeast8444
@northeast8444 Жыл бұрын
Can u plz tell me how to change the time and house adresss on sat nav plz
@NorthCoastWorkshop
@NorthCoastWorkshop Жыл бұрын
Yep, the time is through the MFD, using the steering controls and find the date/time setting on the instrument cluster. The house address/home address is on the sat nav menu (not the map) press the 'setup' shortcut button, scroll down and home address should be at the bottom, then edit it from there 👍🏻
@northeast8444
@northeast8444 Жыл бұрын
@@NorthCoastWorkshop cheeers bro
@jakegray3448
@jakegray3448 2 жыл бұрын
You just for a new fan on my son's account so you just for 2 new subs
Modifying your car with OBDeleven for beginners | MK2 Leon Mods
15:00
North Coast Workshop
Рет қаралды 10 М.
I Totally TRANSFORMED my Interior Lighting with this £3 Mod! - YOU can too!
8:55
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 275 #shorts
00:29
Mom had to stand up for the whole family!❤️😍😁
00:39
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 124 МЛН
What to Look👀 out for when BUYING a Used LEON | MK2/1P Common Issues
17:43
North Coast Workshop
Рет қаралды 26 М.
Seat Leon | Android Radio + Camera
19:59
CSCondeMotor
Рет қаралды 137 М.
MY SEAT LEON CUPRA IS SCRAP!! I CANT FIX IT!
15:33
Saving Salvage
Рет қаралды 121 М.
BEWARE THIS 585BHP SEAT LEON K1 IS A BEAST
20:05
LivingLifeFast
Рет қаралды 368 М.
REVAMP your door cards with these MODIFIED inlays!
8:55
North Coast Workshop
Рет қаралды 2,7 М.
THIS BIG TURBO *STAGE 3 440BHP* SEAT CUPRA JUST EATS UP THE ROAD
16:33
OFFICIALLY GASSED - OG
Рет қаралды 617 М.
How To Restore a Cracked Dashboard
19:46
throtl
Рет қаралды 1,8 МЛН
BEST Cheap Mods for your Car | Easy Car Mods MK2 Leon Cupra R 1P1
21:46
North Coast Workshop
Рет қаралды 33 М.
Reparar cerradura maletero Seat Leon 2
5:44
Mecánica fácil y rápida
Рет қаралды 331 М.
This BIG Design Flaw Needs Fixed on ALL MK2/1P Leons!!
6:37
North Coast Workshop
Рет қаралды 8 М.