Hyundai Genesis BREMBO upgrade 06-15 civic si NO MODIFICATIONS

2010-2016 hyundai genesis 3.8L ultra or 2.0 Turbo front Brembos
2015-2020 Nissan rouge 320mm with 3rd row seating front rotors
Duralast 13586 brake hardware
This is a direct bolt on no drilling or cutting needed.
All Oem hardware will be used.
Any questions leave a comment or reach out to me on IG @ thatsinblue_
#fg2 #fa5 #fb6 #fg4 #civicsi #brembo #brakes #bonda

[@markvillafranco]

Heel yeah! Thank you for the awesome information brother. I Greatly appreciate the vid.

[@SBBUK]

Thanks for the video. I used calipers from a Kia Stinger and a Nissan X-Trail they also fit (im in europe).

[@vtecroar6196]

Please tell me more, callipers from stinger, and rotors from x-trail ? What else ? Bolts for callipers from what ? I want to upgrade 9gen si in Europe and it’s hard.

[@StephenBrewer89]

I’m interested. What exactly was involved

[@SBBUK]

@ Exact same as this video just buy stinger front brembo calipers instead. Any stinger with 3.3 engine should have thme.

[@StephenBrewer89]

@ than you

[@TUNER429]

I am having a hard time finding the brake rotors, I realize and appreciate the part number in the video but the autozone and oreily people say that doesnt come up with anything and I have a hard time finding the 320 mm rotors in general

[@thatSiNblue_]

@@TUNER429 sorry been on vacation, it’ll be hard to find a Nissan rogue with the 3rd row seat option locally. But this link can help www.autozone.com/brakes-and-traction-control/brake-rotor/p/duralast-disc-brake-rotor-76021dl/792875_0_0

[@jefflebo5836]

Great video. What’s the distance from the rotor ( where the wheel hits ) to the front face of the caliper? Trying to figure out what wheels will clear the caliper. And or if I’ll need wheel spacer. Thanks!

[@thatSiNblue_]

@@jefflebo5836 well a oem wheel won’t clear, you’ll need a diameter of 9 and offset of +45 to clear with no spacer or issues. I believe if you run a oem wheel it’ll be a 20mm which is way to big

[@SBBUK]

im running 18x8.5 et35 and they fit fine. It does depend somewhat on the style of the wheel though.

[@jefflebo5836]

Thanks. Had a feeling wheel design might be a factor.

[@jefflebo5836]

@@SBBUK what wheels are you running?

[@SBBUK]

@@jefflebo5836 wedssport SA-72Rs, I think they are not produced any more but they do other similar wheels.

[@doublells9066]

Thanks for sharing! How was the offset of the wheels afterwards? Are they still OEM offset? I have a spacers on the front and worried they won’t bolt on the same

[@thatSiNblue_]

@@doublells9066 sorry been on vacation, you won’t be able to use oem wheels. You’ll need a x9 diameter wheel with at least 45+ offset if you don’t wanna use spacers.

[@boshanan1]

I have TL brembo calipers on my 8th gen with 310mm rotors do you think these 320mm will fit also ?

[@thatSiNblue_]

@@boshanan1 probably not. You can try but I believe one pad will wear fast or will have friction when rolling

[@yerrzy]

Can I get it stock from rock auto? And will with fit on a stock fg4 wheel?

[@thatSiNblue_]

@@yerrzy it will fit fg4 and you can get rock auto here’s a link to autozone www.autozone.com/brakes-and-traction-control/brake-rotor/p/duralast-disc-brake-rotor-76021dl/792875_0_0

[@CathanSimpson]

I have stock lines will they fit ?

[@thatSiNblue_]

@@CathanSimpson yes it’ll work with factory lines just get new banjo bolt washers find them on Amazon variety pack

[@adaman1787]

@@thatSiNblue_hey I’m doing this upgrade this weekend I have everything I think I need what size banjo bolt do I need 1.5 or 1.25

[@robertalicea5585]

How are the new calipers compared to stock?

[@thatSiNblue_]

@@robertalicea5585 I would say they grab harder also very responsive. Also I don’t get brake fade

[@elluuwu2217]

Howd you even figure out the rotor measurements dawg 😭

[@thatSiNblue_]

@@elluuwu2217 😅 a lot Amazon returns on rotors

[@tonyharpaul1524]

Hi will this fit a2007 acura tl type s.?

[@thatSiNblue_]

@@tonyharpaul1524 no this wouldn’t

[@tonyharpaul1524]

@thatSiNblue_ thanks for replying

[@Undertakerforza]

That fits the dc5 too?

[@thatSiNblue_]

@@Undertakerforza no this specific for 8th 9th gen

[@sc6015]

Are you doing brembos in the rears?

[@thatSiNblue_]

@@sc6015 yes I have currently read brembos on the car

[@sc6015]

Make a video for the rear brembo setup bro 🔥🔥🔥

[@sc6015]

@@thatSiNblue_can you still use hub centric rings for aftermarket wheels bro? I need to run hub centric rings in my rpf1s

[@dylangunter2254]

@@thatSiNblue_ Is the rear also 3rd row seating 320mm??

[@thatSiNblue_]

@ rear is factory disc But they do no use the Genesis rear calipers

[@adolfovergara3058]

Hi, did you change the master cilinder? or its the stock one?

[@thatSiNblue_]

@@adolfovergara3058 I didn’t have to change it, it’s usually personal preference.

[@adolfovergara3058]

@@thatSiNblue_ thanks, i'm thinking doing it

[@urgandma]

​@@thatSiNblue_ still good brake pressure? People say with the TL brembos on a stock SI master cylinder that your peddle goes to the floor.

[@thatSiNblue_]

@@urgandma yup mine didn’t go to the floor. They probably didn’t bleed them right. I use a machine for bleeding.