Hyundai Genesis Brembo Big Brake Kit Upgrade on my 9th Gen Honda Civic Si

[@lemuelriolo]

Wow! I can't believe you use Hyundai Genesis Brembo Big Brake Kit to fit your FB6! I remember TL Type S Big Brake Kit can fit to FB6. Then, you are the first show about Hyundai Genesis! Good work!!

[@StayLurking]

Thank you!

[@d0mochi]

The Genesis works well on the 10th gen civic too. The mounting brackets line up

[@Korean_Jesus]

Most cars will be direct fit, the problem is if people are spending the time to find the right calipers

[@RicardoCalderon3212]

The KZbin algorithm failed me. Just last week I put brand new EBC rotors and EBC brake pads for my stock caliper setup. For just a little more I could've done this?! Ugh, thanks for the great video. I am gonna be thinking about this forever now!🤣

[@rs3tuber425]

Great brake kit for the street and some spirited and short autocross but the caliper still has piston booths although they are better than your average car booth because at least they are silicone. Unfortunately they don't stand a chance for a road course, for that you will need straight precision cut pistons made of high temp alloy. When I say precision cut piston what I mean exactly with this is that the whole(bore) in the caliper is so precise that the piston fits perfectly without getting dust inside and for that you are talking forged calipers. I recommend either AP racing, wildwood or stoptech trophy model, all 3 brands have no piston booths. I personally had stop tech and Brembo GT, not to be EVER confused with the lower tier Brembo sports that MOST factory cars use. Just to summarize, these brake kit is beyond excellent for most people, that is all you will ever need to street, spirited driving and small auto cross but neither the stockfish brake pads nor the booths will stand a chance. The paint will also turn brown because this calipers are simply aluminum and nor forged. Thanks for the video by the way.

[@Fecho00]

I have everything ready to do the conversion on my 10th gen accord!

[@Ktwenty4]

Exactly what I needed to see 😁

[@doingishwithish622]

Thanks for the video dude, I bought the setup sometime last year and recently coated them.. ill be installing them soon, glad to know it'll actually work lol

[@StayLurking]

Thanks and you're welcome!

[@EX-L_Chronicles]

Hey by any chance can you tell me how much clearance you needed or need for these brakes ?

[@doingishwithish622]

@@EX-L_Chronicles I ran 17x9 +27 a tech wheels and they fit perfect. When I put nt03 18x9.5 +27 and I needed a 6mm spacer to clear

[@eyelis3757]

Didn’t know you were Hmong til I saw the string on your wrist, anyways just finished this up on my 09 Acura tsx and it fits beautifully.

[@StayLurking]

Haha. Yup. Proud Hmong here. And nice! Glad to hear it all worked out for you as well! 🤙🤙

[@ignaciovega8500]

You can use montegi traklite 3.0 wheels aswell 17x8.5 +35 👍🏽

[@sc6015]

Would rpf1’s 17x9+35 fit ?

[@eduardocoutinho7178]

Do you have this setup? Does it work without any spacer? Thank you!

[@plu6612]

damn, looking GOOD! 17x9? is there and sort of rubbing at full lock?

[@StayLurking]

No. No rubbing at all. Fenders are rolled.

[@Sam.powers787]

I’m looking for the rotors that you mentioned, and I cannot find anything about a Nissan rogue that has a 3rd row

[@Kingface_official]

Nissan Sentra Ser calipers work as well that’s what I’m running

[@EX-L_Chronicles]

How much clearance do you need for that brembo set up ? ​@SIJAWN

[@pcha151]

Rogue 3 row 320mm

[@nhantran98]

I got a google drive folder for 10-11th gen civic BBK clearance template if you want

[@jngtruong]

Nice video. I appreciate the details. Did you have to replace your master cylinder or brake booster?

[@StayLurking]

No. Still running the 9th gen OEM BM & brake booster

[@jngtruong]

Appreciate it!

[@eduardocoutinho7178]

Do you or anyone have any info on the RPF1's 17x9 +22 ? I've seen a lot about +35 and it won't clear without a spacer. Bot got nothing back in response on the +22. Would appreciate anyone who has any knowledge on it. Great video bro! Thanks!

[@StayLurking]

17x9 +22 will most likely require a spacer to clear the Genesis BBK. I had this spec with my RL set up and it didn't clear, needed to run a 15mm spacer and the RL calipers are much smaller than the Gennys. I have a set of 18x9.5 +25 RPF1 reps, that I test fitted and they do not clear. I wish I still had the 17x9 +22 spec to test, but hope this gives you a better idea.

[@eduardocoutinho7178]

@StayLurking Thanks for the "long" version response! It sure helped. And a 15mm spacer is a lot (imo). Actually, I'm looking for a miracle. Biggest brake kit possible, with the smallest wheel possible. Everything in the name of saving weight. And here comes the miracle. It has to be on a really small budget. I know, I'm looking for a miracle. Thanks, brother!

[@jefflebo5836]

Could you take a measurement? The distance from the face of the rotor ( where the wheel touches ) to the face of the brake caliper ( where it says Brembo)? That would help me figure out what wheel - specifically the wheel spoke design that would work. Thanks.

[@EpicFatMann]

I was one of the first to do this swap, works great, especially when it’s all direct fit

[@nightseal190]

Hey man, i really loved the look of your old grill and was wondering where i could get my own. its 8th gen style and i really like that. Love your build btw

[@StayLurking]

Thanks. It is the OEM 2012 Honda Civic Si Sedan Front grill. I just paint matched the top trim portion of it.

[@therecon2631]

This Si🤩👍

[@Bayuh]

please upload again! im missing your content!

[@StayLurking]

Appreciate the support! Hoping to start uploading more vids in the very near future!

[@nayarmikhael7080]

where did you get the rings from for the rotors my boy

[@alextsao4449]

Great build, color combo very classic Honda racing! I have a question as I'm stuck undecided as to which to choose from situation. I have RL calipers with brackets setup to go on my 7g Accord coupe but seeing this makes me curious about the Brembo options. Was there a big performance difference in your experience (between RL vs Brembo Genesis)? And what was reason for changing? Pad choices? Thanks in advance

[@mannyplus6536]

What sizes of wheel I need? What’s the offset and dimensions of yours? Would it fit a 17x7.5 ET50?

[@95r81cx]

@mannyplus6536 no way will that type of wheel size especially as an aluminum wheel.

[@han027]

Hey bro nice video, I was wondering ifthat would work in 2018 crv awd?

[@tonyli7317]

Man! You moved on from FB I didn't even know where you went after you sold your EP lol. Nice work! I'm planning to get a FA5 in the future and started looking at mod list, somehow stumbled upon your video! I think this setup might work on FA5 or even EP3 as well. But with bigger brakes comes different brake booster I think? What do you use for your booster after this setup?

[@StayLurking]

Hey Tony! Hope you're doing well. Yea, I'm still alive! 😅 but yes, this setup will work on the 8th,9th,10th gens. I believe the EP and rsx as well, but don't quote me on that. I ran it fine with the 9th gen OEM booster. But i'm sur changing it out to a bigger will only benefit

[@tonyli7317]

@@StayLurking thanks for the info man! Hope all is well on your side as well! I just bought a pair from AutoZone with 20% discount lol. I remember one guy from socal EP3 installed the same setup as yours, so I think you are right!

[@KyleWithAWhy]

Awesome video man! Think I’m gonna go with this setup as well! By chance, do you think they’d fit with stock 2012si wheels?

[@StayLurking]

Thank you. I would think you'll need a spacer to clear the stock 2012 si wheels.

[@gorcrx]

Hi.I have a 2015 Civic SI.If I upgrade the brake master cylinder to a acura TL types S one I have to change the brake booster because the bolt pattern change. The TL brake master cylinder will not fit 9th gen civic brake booster. What brake booster should fit on the 9th gen civic?

[@JuvenFilms]

Nice video bro. Do you think this would fit on a 9.5 gen Accord. I plan on going boosted will like better stopping power 😅

[@StayLurking]

I believe these will fit on the Accord as well. I've seen these on accords and 10th gen civic si as well. I'm just not sure if any extra parts are needed to make it work.

[@paripepo]

You mentioned it can use Evo/STI pads .. any specific years ? Thanks 🙏🏼

[@alfredomojica8841]

Can you tell me what size is the hubcentric centering rings❓️

[@gallardo20000]

No BMC upgrade? mushy pedal?

[@O.Sanchez]

Looks great!! Quick question, will my stock wheels clear this ? Or do I need to get aftermarket wheels with proper offset ? Thanks!

[@StayLurking]

Stock wheels will not clear. You'll need to run a spacer.

[@EX-L_Chronicles]

I have wheels with +35 18" × 8.5" do i need a spacer as well ???

[@StayLurking]

Cant say for sure, because it depends on the spoke design as well.

[@johneddings6843]

What are your exact wheel specs? Currently running 17x8.5 +38

[@robertbelden7714]

Hey man i have a 9th gen and im looking to upgrade to a bbk but i was just wondering if the stock brake mc in our cars will work fine.

[@StayLurking]

Yes. The stock MC will work just fine. If you want to upgrade the Acura TLS MC is a good option.

[@EX-L_Chronicles]

How much clearance is need for the whole brake kit ?? Just wanna know if i need spacers for my wheels , i have 18"× 8.5" 35+

[@MrSo-6]

You don't have vibration issues since the center bore of the Rogue rotors are not matching the hub?

[@StayLurking]

I haven't experienced any vibration issues. Car drives and stops like it should.

[@gregorymaldonado8043]

Is t that what the hub center rings are for? What size is needed again?

[@sc6015]

I didn’t see you use the hubcentric rings that you mentioned to use for the brake rotors, but I wonder if we can still use hub centric rings for our wheels. I do run hub centric rings for my 17x9 35mm rof1s

[@HIFONICSM3]

You didn't use the centering ring that came with FFC kit ? How big is the hub on the civic ? I know the 68mm center bor of the rouge rotors are too big so I need that center ring for my 06 TSX.

[@SBBUK]

What specs are your wheels? I have 18x8.5 ET35 which should provide decent clearance but I read these calipers are very large.

[@savagepickle0443]

Are there any bigger rotor options for this setup? If I’m not mistaken the 350z brembo rotors are 324mm ehich can be used on Acura rl big brake swaps for Hondas, with that being said are there any benefits to doing this upgrade over the rl one? Are the caliper pistons any bigger and do they out perform the rl calipers in harsh driving scenarios like at the track I’d love to know some more info on this

[@StayLurking]

When I did my test fit, it seemed like the 350z brembo rotors would work. They are slightly larger, though, as you mention at roughly 324mm. From my personal experience from switching over from the RL to the Genesis BBK, the initial bite and feedback from the genesis bbk is much greater than the RL. They are both 4 pistons calipers. Also, an upside to running the Genesis BBK is that there are no additional brakets needed to mount the calipers. The RL calipers are bulkier too, so wheel options are much more limited in order to clear the RL calipers.

[@supervong1]

@ 6:33 you removed the oem center ring....did you put it back in there after new rotors installed?

[@nayarmikhael7080]

that wasn’t a oem center ring he had a different kit, oem brakes won’t have a ring

[@adamubias6695]

Will these fit with the stock wheels or will I need a wheel with a certain offset?

[@rico_visionsmorales6401]

Would a 25mm hubcentric wheel spacer be too aggressive? Looking to work with what parts I have laying around

[@SpaceMarine777]

late to the party, just curious what are your wheel specs. I'm trying to figure out if there will be any fitment issues up under stock wheels

[@mendezgarage6487]

What wheel size and offset do you have, I got the rl calipers but won't fit my stock wheels

[@kelvin9439]

Did you had to replace the master brake cylinder when upgrading to the brembo kit ?

[@StayLurking]

No. I'm still running the OEM BMC.

[@kelvin9439]

Ok, thank you.

[@waverider5751]

I’d think you’d get better pressure from the larger BMC. I started my front brake upgrade with the 06 TSX BMC. BIG difference even before the bigger brakes went in. Just a thought…

[@gallardo20000]

@@waverider5751 did you have to bend the lines for the TSX BMC?

[@FDsunS]

Hey brother, I’m planning to do this mod for my 8th gen civic. I am running advan RS2 18x8+45. Do you think these wheels will clear the brembo without spacer?

[@StayLurking]

The Advan RS2 does have nice bbk clearance, but if anything you may need a small spacer due to the specs you have.

[@FDsunS]

@@StayLurkingthank you! I’m super excited to do this mod. I will buy like a 10mm spacer. Btw, I saw the red string on your wrist. I have one also lol. Thanks again bro!

[@lssi9073]

@staylurking Which Brembo calipers do you get from the Genesis, the front or rear calipers since Genesis has front and rear Brembos?

[@Fecho00]

Front pair

[@BigMike86]

Bro where you at? Haven't seen a video from you over 11 months? What's up brudda?

[@StayLurking]

Just been busy, haven't really had time to really sit down and edit. I do update often on my Instagram.

[@cjnalam]

Do u happen to know if that set up clears the enkei RPF1?

[@Kingface_official]

It does

[@tonyharpaul1524]

Hi will these brembo calipers fit a acura 2007 acura tl type s.?

[@StayLurking]

Probably not, because the TLS knuckle utilizes larger caliper bolts than the 9th gen civics. You'll probably need to drill out the genesis calipers to make them fit an dother modifications may be needed as well.

[@tonyharpaul1524]

@StayLurking okay thanks for replying

[@boshanan1]

Can i use these rotors with TL TYPE S brembo calipers ?

[@StayLurking]

No, these will not work.

[@ianmorales5500]

Are you able to run oem brake hoses? Or which do you need?

[@StayLurking]

I'm running stoptech stainless steel hoses, but OEM hoses will work just fine.

[@james95itr]

Where did you get the hub centric rings?

[@RICARD01]

You forgot to install the rotor centering ring...

[@95r81cx]

Those aren't the OEM brake pads FYI, probably aftermarket so do not base your baseline from them. Hawk HP street 5.0 for a lighter civic vs genesis coupe should work well.

[@StayLurking]

Thanks

[@staticboyz8671]

Will this setup clear oem 14-15 si wheels?

[@MirageTactics]

Also really hoping he’ll reply to someone about wheel clearance

[@StayLurking]

No, this will not. You will need to run a spacer for it to clear.

[@fbgmmomo7621]

@@StayLurkingwhat size mm spacers would I need

[@StayLurking]

Stock wheels are not meant for BBK's, so you'll probably need a 20-25mm spacer.

[@scox636]

Would the rear brembo's fit the 9th gen as well?

[@StayLurking]

A custom bracket is needed in order to fit the rear brembos and maintain the ebrake function.

[@scox636]

@@StayLurking Okay cool, I was wondering because I bought a full set of these Brembo's and planned to sell the rears, however I'd prefer to fab them to my 9th gen.. Thanks!

[@sc6015]

@@scox636if you figure out a bracket let me know I’ll buy a set from you. Thanks

[@gerardogonzalez3556]

What about rear are they plug and play aswell ?

[@StayLurking]

Rears are not plug and play. Will need a bracket to mount. Plus, I think you'll need to keep the stock calipers along side it in order to retain the ebrake as well.

[@gerardogonzalez3556]

@@StayLurkingOh thank you! It was driving me crazy theses past days since I watched your video and proved it was a direct fit. More so you gave me some knowledge I couldn’t find myself.

[@OpTicMinds]

Non related question But do you have a dash cam on your 9th gen?

[@StayLurking]

Yes I do. I'm running the wolfbox dashcam.

[@OpTicMinds]

@@StayLurking might need a video on that wiring and kit you used boss 😅

[@StayLurking]

@OpTicMinds i actually have the videos for it, just need to edit it. 😅 hopefully to upload it soon.

[@OpTicMinds]

@@StayLurking ima be on the lookout 👀 hopefully soon Thanks for the reply 🙏

[@seley4866]

Can I use 300mm tsx rotors with this calipers

[@StayLurking]

You'll most likely experience some brake pad over hang and not sure if itl'll fit either.

[@JuliusmX]

Does it matter if it’s rear or front calipers

[@StayLurking]

Yes, it does.

[@Moodyhogs-t2d]

I wonder if this would work on a 8th gen si

[@fa5k206]

It works!

[@StayLurking]

Yea, it should work.

[@cybergrindin]

9th gen Accord too?

[@vietbboi813]

Would this work with RSX/DC5?

[@bryandarkside]

will it work on a 11th gen civic?

[@miklfb6]

Howre they holding up? I hear they make a lot of noise from the 10th gen forums

[@StayLurking]

They are holding up fine. And no weird noises for me.

[@miklfb6]

thank you@@StayLurking

[@JavaughnDawkins1997]

Will this work on the 8th Gen Civic??

[@ekbenny3939]

No drilled and slotted ?

[@StayLurking]

No.

[@mauricerobinson4480]

What year car do those come from

[@adolfovergara3058]

Will the calipers work with stock 8th gen rotors?

[@StayLurking]

No, you need 320mm rotors.

[@adolfovergara3058]

​@@StayLurkingthanks

[@XeroDash0]

Can I use a different rotor that is 320 mm or does it have to be Nissan 3rd seating?

[@StayLurking]

I believe you can, but don't quote me on it.

[@XeroDash0]

@@StayLurking thank I’ll try and if not just send it back

[@angelmejia1915]

How did it go?​@@XeroDash0

[@mysticcrushgamers6736]

Bolt on for 8th gens as well?

[@JavaughnDawkins1997]

I’m curious too cause I got a FA5

[@mysticcrushgamers6736]

@@JavaughnDawkins1997 it works. Bought a set for mine

[@JavaughnDawkins1997]

@@mysticcrushgamers6736 you went with his exact same set up right?? If so can you drop me a link for the rest of the accessories?

[@DanielGarcia-fp8vm]

Did you bleed them

[@StayLurking]

Yes

[@chiragh87]

what wheels?

[@Whitehatch_Checo]

I think the pad is to big for that rotor

[@Kingface_official]

Can you give me the name and part number for the exact rings you ordered?

[@ly8431]

Hello bro,I have some questions about 2012 hybrid tail lamp, can I have your Instagram ?

[@mauricerobinson4480]

What offset are you running because because I did the set up on my car, but my wheels cannot fit I’m running 18 x 8 1/2 with 35+ offset so what offset do I need to get for the wheel to fit without spacers?

[@StayLurking]

Although specs are an important factor in clearance for the bbk, many people often overlook the spoke design, which is just as critical and needs to be taken into consideration as well. I mentioned all the specs at the end of the video. 17x9 +27 but this doesn't necessarily mean that another wheel in the similar specs will clear. Hope that helps.

[@angelmejia1915]

Did you find out what offset would be needed?

[@gabersonnn]

Would this work on an 8th gen ??

[@sleep2sleepy]

Yes