Best comment of the day: “It’s vaping, I didn’t know this was a Subaru!” 😂😂😂😂
@paulcarmi81304 жыл бұрын
It's accurate. Source: I live in Colorado
@mobilechaosyt5 жыл бұрын
It is alive.. You know the best thing about getting the engine into the Veloster? We now get to move on to the R8. YEAH!!!
@Gabe-ABNCW35 жыл бұрын
MobileChaos:🎉🎉🎉
@drippingwax5 жыл бұрын
Yes! The one hogging the jack stands! :D
@WatchJRGo5 жыл бұрын
I would like to actually drive the R8! 💪
@drippingwax5 жыл бұрын
@@WatchJRGo Of course. Didn't you say you wanted to sell it before the new engine broke?
@WalkiTalki7 ай бұрын
I have swapped tons of these. Once Hyundai announced which ones qualified for free replacement and which did not everyone wanted to fix theirs. If you pull the axles and then the two exhaust pipe bolts underneath then the lower torque arm everything else is reached from the top. Leave the trans and exhaust manifold connected to the motor and lift the entire package out as a unit. We once forgot to install the trans throw out arm and had the entire thing out on the ground and back in and running in 2.5 hours. If they had less electronics they would be as easy as the old six bolt engine/trans swaps on the VWs back in the day.
@X-OR_5 жыл бұрын
I remember back in my old neighborhood, when one of the guys starts wrenching on his car, after a while there would be 10 kids hanging out pitching in.
@WatchJRGo5 жыл бұрын
Pretty much what we do! 🍻
@johnfrese48515 жыл бұрын
There is always something new to learn when you help out someone wrenching because if it is a car that your interested on getting aka a model similar it is the best to learn by helping
@greathornedowl36444 жыл бұрын
Reminded me of a story. My dad worked for a municipal garage. He bought a used '58 Chev Wagon and blew the engine. He bought another engine (think scrap yard not new), and went to the garage over the weekend (1/4 maintenance mechanics in) to replace. The story was enough mechanics and drivers around engine bay you could not get within 10 feet or get a wrench up your behind. Engine swapped in a day, and he bought lunch.
@vergin95 жыл бұрын
I like how you guys always have a little fun before or while working that's cool cause a day without laughter is a day wasted
@BREN70S5 жыл бұрын
That's a great philosophy .
@Gabe-ABNCW35 жыл бұрын
Christopher Miller: Indeed, this is what makes life worth living! Cheers!😉
@assomekid3505 жыл бұрын
Man this video was awesome. I have a 2012 Hyundai Veloster as well that's in need of an engine swap as mine is knocking so watching this made it seem like an easy thing to do!
@drippingwax5 жыл бұрын
Do you have three knowledgeable friends and an air-conditioned garage?
@themevlog22605 жыл бұрын
are the engines in these cars just suck or what?
@B0xlife15 жыл бұрын
@@themevlog2260 curious about that myself...
@wolfman99999995 жыл бұрын
@@themevlog2260 No. Hyundai and Kia tend to be cars that are bought by people who don't necessarily take care of things.
@jasonwheeler89965 жыл бұрын
We have a 2012 with 105k no real issues yet.
@troolplay20104 жыл бұрын
I did this project in probably 6 hours, by myself with a help of inserting the engine into the pilot. If you have a side impact drill it'll cut your time in half, and those exhaust nuts will be done in 3 minutes. It's designed nicely, everything can be tucked away nicely and its hard to miss a plug/hose.
@deloreanman145 жыл бұрын
I owned three Hyundais and I gotta give their engineering team props. They are stupid easy to work on.
@Elaba_4 жыл бұрын
Did you find they were less reliable than average?
@deloreanman144 жыл бұрын
@@Elaba_ The first one (a 2004 Santa Fe) was amazing. I think maybe six things went wrong with it in almost 150,000 miles. My 2010 Santa Fe was a total lemon but the 2012 Elantra that replaced it was not bad. I'd consider them again but after driving Hyundais for over ten years, I need some time to see other brands.
@Barnehy14 жыл бұрын
Good video. Thank you! We have a 2015 Veloster here at the shop that spit the #3 connecting rod through the oil pan. We weren't sure which way to pull the engine. Your video made the decision for us. Thank you again!
@insomniafun87514 жыл бұрын
I have the same car, year newer, 82ish thousand miles (I can't give you an exact number, as with the world being on fire, I haven't driven it in a while) Thanks for showing me it's this easy to work on, and I also think I made the correct trans choice, got the manual, it's almost as good as an old Civic with a rebuilt bushing kit, no complaints.
@TheDaf95xf5 жыл бұрын
Hi 👋 Love how you boys have lots of fun fixing motors 😄 It’s the sort of thing I did in the 70s with my friends lol 😆 Stevie 😎🇬🇧
@MassiveTrackHunter5 жыл бұрын
Hauls a $25k motor with the rampage. Pushes the velositer with the skateboard. Love it!
@spenceradamsjr2 жыл бұрын
This can very easily be a difficult swap. I have swapped lots of engines, and this is by far the hardest. I have spent whole days trying to get that pilot bearing aligned and have seen lots of others in the same situation. If you start this job, you better be ready for lots of down time.
@Gabe-ABNCW35 жыл бұрын
*THE CATALYTIC CONVERTER IS PERFECTLY FINE* During our test drives we monitor everything via OBDII. After approximately two miles we observed the cat temps drop from 1500°F to its normal operating range of just over 1300°F. We also observed that smoke was no longer present. Since then, the car has been driven daily with zero issues. We really appreciate all of your comments and support! Cheers!😉👍🏼
@COV- Жыл бұрын
Do you need to be in neutral or park when swapping the motor. I also gave a dct, and doing this on Saturday
@MyLifeThai3712 жыл бұрын
Wow you guys were fast! You guys kicked butt on that engine swap!
@dougcamilo16535 жыл бұрын
wanted to see that test drive guys. A vaping veloster oh yeah
@lenledbrook82855 жыл бұрын
Scratch the cat...possibley entire exhaust system?
@Ridgeroader5 жыл бұрын
You said the magic words, "This is gonna be easy." Kiss of death
@chemxfan5 жыл бұрын
A fine job, gentlemen - and you did it under a roof with a/c. Those Boosted Board tricks were pretty sweet - pulling the engine, then pushing the car to the garage was a testament to how well they are built, obviously. I didn't think a powered skateboard was going to get it done, but I'm impressed!
@Gabe-ABNCW35 жыл бұрын
chemxfan: Believe me- we all were blown away! 😉👍🏼
@heavy_haul_n_fool5 жыл бұрын
Nice plugged up catalytic converters bet the new owner will love that too
@VirmanaMarketing5 жыл бұрын
Just did the same using a skateboard to move a washing machine... worked out like a charm
@mrgallardo7775 жыл бұрын
Awsome Channel. I don't know how you don't have much more subscribers........But something tells me you will soon 😁👍
@Robsav-yx6vi5 жыл бұрын
Well said Efrain .. I agree
@joelpope59885 жыл бұрын
Love how the guy in the hat and glasses just chills on his phone during and turns up after when the works done lol
@mjmcomputers5 жыл бұрын
Way to go Hyundai for making a modern car that’s easy to work on.
@03amp5 жыл бұрын
Hell yea for the orbiz engine teardown
@segounlocks50297 ай бұрын
Did ya ever fix the smoke? I just swapped or had someone swap a 1.6 2016 accent with 39k that got hit in the front. The blown motor was smoking like yours and when we put the new motor in it still smokes not to bad but it would probably make someone think its got a blown head or a smarter person think it's buring oil and the previous motor was buring oil. I'm just a locksmith. You think maybe the exhaust is dirty. Should I run something threw it?
@RichieRouge2065 жыл бұрын
Great that you got the Veloster working again - yay. Hope the smoke goes 😂😂
@Gabe-ABNCW35 жыл бұрын
RichieT5: It runs perfectly now. Everything cleared during the test drive. 😉👍🏼
@jimmydiamond3535 жыл бұрын
You've got a good bunch of guys as friends
@MegaBluebone5 жыл бұрын
of course we want to see the inside of the engine. dissecting destruction is an awesome topic. cant wait to see the Audi engine.
@Gabe-ABNCW35 жыл бұрын
DundaBluebone: soon....😉👍🏼
@dallass86655 жыл бұрын
Woohoo its all alive great job guys 👍
@danjones6702 Жыл бұрын
how many miles did the engine have on it before replacing been hearing so many people having issues with their engines before even getting 100,000 miles on them.
@hermyherm3655 жыл бұрын
That Gabe seems like a really cool dude!
@usererror19695 жыл бұрын
great video .... I'm a fan of this channel. can't wait to see more
@jonathanbias5789 Жыл бұрын
I'm about to do this to my 2012 manual veloster my rod bearings went out rite after 150 was this a auto or manual trans or do you know if they are the same to hook up to trans? Thanks for the video post!
@MyNameChefBoiRDeezNutz5 жыл бұрын
I wish u did a gdi turbo swap woulda been sweet
@DougsCars5 жыл бұрын
That’s a powerful board!
@greathornedowl36444 жыл бұрын
Great to review during the quarantine. Betting he put the R8 engine in Veloster and the Veloster in the R8.
@greathornedowl36444 жыл бұрын
Josh is like " you couldn't start this outside?" "simple to work on, easy in easy out, reminds me of an R8"
@wrenchgroove93875 жыл бұрын
lil smoke never hurt anyone
@bigccentertainment48925 жыл бұрын
Just to give you a heads up. 7/16-7/21 is the National Desoto Convention in Hutchinson, KS. It will be at the Atrium Hotel & Conference Center. The best day to see the cars will be Saturday 7/20 at the car show at Carey Park in Hutchinson, KS. Desoto was a division of Chrysler from 1928-1961. We will have our Desoto in the show. I figured it would be some great video content for the channel. Hope to see you there.
@Gabe-ABNCW35 жыл бұрын
Clayton Colburn: Thank you Clayton. We will see if we can make it. 😉👍🏼
@yellowdogparty4 жыл бұрын
I had to ship my knife back to my house twice for the same reason. I went through the line. Thankfully both of the airports I went through let me ship it after TSA. As long as you tell them, they’re cool with it (as much as that seems implausible for the TSA).
@RyanOfstie4 жыл бұрын
Swapping out the DCT on the same year Veloster - all bolts removed - but its not separating. Is there a special trick? Hammer & Wood? Twisting? One bolt snapped at the head - could this be holding things up? Is the '12 DTC interchangeable with all Gen1s? Can i get a low mile '15 or '16 instead of a high mile '12?
@bejones8163 жыл бұрын
What the real question is, what bigger motor will swap in there? Will a 2.0 out of a Kia swap in and make more power? I have a 2013 making around 300hp, but its maxed out
@atecgaming7164 жыл бұрын
It is so much easier to just pull the front clip, not hard at all either. Bumper>crash bar>upper radiator support>radiator(intercooler if turbo)>lower radiator support You have to drain coolant anyway. Everything is either 10mm or 12mm.
@curtthacker435 жыл бұрын
You owe Gabe a few steak dinners for sure he has been a solid friend and a huge help for sure plus he is a vet so I like him already army 💯I was 25th
@Gabe-ABNCW35 жыл бұрын
Curt Thacker: LOL! Thanks for advocating for me. I was also 25th- 2/35 🌵. Who were you with?
@curtthacker435 жыл бұрын
@@Gabe-ABNCW3 I was with the 84th engineers and assigned to them as a forklift and crane operator in Mosul Iraq 08 to 09 setting up there polling stations was at Schofield barracks 2007 to 2011
@curtthacker435 жыл бұрын
Tropic lightning the old electric strawberry patch lol
@Gabe-ABNCW35 жыл бұрын
Curt Thacker: Awesome brother. You were at Schofield a good while after me, though we were in Iraq at the same time. Cheers man!😉🍻
@curtthacker435 жыл бұрын
@@Gabe-ABNCW3 heck yeah good times
@bobstroud91184 жыл бұрын
Hood prop rod is bent to allow storage across the radiator.
@christoperpemberton51474 жыл бұрын
Did you put the spacer between the engine and transmission? We did engine swap with a Accent engine into a Veloster runs ok but won't got past 3,000 RPMs goes into limp mode. Giving a code of engine misfire. Any suggestions?
@iSteven1805 жыл бұрын
I know your going to flip it but you may want to run some GDI Cleaner through it to clean the valves and turbo since it’s not designed like a traditional engine. I believe CLR sells it.
@Scypher0th5 жыл бұрын
GDI cleaner does nothign its been provin time n time again that its near impossible for chemicals to do any type of cleaning on Direct injetion engines. the only way to actually clean thhem is to media blast the chamber. That is why i dont under stand why ppl run injection/fuel system cleaner in new engines...it dont do shit
@iSteven1805 жыл бұрын
I have recently trialed it on a friends 2012 Veloster with 80,000 original miles and it had never been done. What he noticed after me completing the cleaning is a lower idle, better throttle responsiveness, and noticed his car is Peppier overall. This is the same chemical the Hyundai dealer uses and your supposed to preform this service every 10,000 miles or so due the the carbon build up inside of the valves. The reason being is that since the gas is directed inside of the cylinder instead of passing through the valves like a traditional motor does. You will get a ton of carbon build up that will rob your motor of power and economy.
@shadyman63464 жыл бұрын
Really fun to watch!
@sleepyhollow7835 жыл бұрын
All the parts for the Subaru SVX?! J & J Auto has me sold. (1997 SVX, one of 640)
@Elaba_4 жыл бұрын
WatchJRGo, How long did the car take, with the new engine in, to stop smoking? Was it after a couple of minutes? Did it go away gradually? I own a Lexus CT and I changed the head gasket but the car keeps on smoking after hours of idling. It's an aluminium block and the block is probably cracked.
@WatchJRGo4 жыл бұрын
About 5 minutes, had to burn off that polymer goo 😂 CT might need a little more help, do a leak down?
@keithhernandez4319 Жыл бұрын
I must of missed a video. Why did you have to replace the engine
@jrlenz855 жыл бұрын
love the Letterkenny references.
@fres_yes3275 жыл бұрын
jrlenz85 stuart
@matixsgarage1355 жыл бұрын
What about the quirks and features ?!?
@drippingwax5 жыл бұрын
How about the dents in the roof?
@cocmaster44745 жыл бұрын
@@drippingwax 😄😄😄⬅️
@jsaavedr14 жыл бұрын
How about giving it a Doug score?
@michaelyukon64284 жыл бұрын
Where did you drain the coolant? I have the same project but its turbo. I don't know how to drain the coolant!!
@potatochobit5 жыл бұрын
good, great car to bring back to life.
@craftbeerlover99945 жыл бұрын
WOW, jack stands!!! LOL!! Dig the vids JR!!
@Gabe-ABNCW35 жыл бұрын
What’s better than having a good time trashing an engine and then replacing it? Finding your lost 10 mm socket!!
@crs2905 жыл бұрын
10mm sockets don't actually exist in this dimension.
@souhail83684 жыл бұрын
I wish I had good friends like that
@daltonbaird16334 жыл бұрын
How do you discharge the ac system at home if the vehicle cant run at all?
@JRCody-ds3ec4 жыл бұрын
"Well, we think the starter's toast. Its probably because we cranked it for so long with the orbeez in it, it happens."
@ChrisPollard4 жыл бұрын
Is that a 61 Falcon in the driveway in front of the garage?? I want to see videos of THAT!!
@hellyeah22994 жыл бұрын
I wonder how long that orbeez plugged catalytic converter lasted.
@El_Chompo5 жыл бұрын
Are you ever going to do a tour of your giant steam workshop and explain what those gigantic things are for? Thanks.
@Younotus4553 жыл бұрын
When you swapped this engine. Did you have to take out the axles?
@maxrockatanksyOG5 жыл бұрын
Updoot for the 80's synthesizer music!
@Digital-Dan5 жыл бұрын
JR may have the most mellifluous voice since Bing Crosby.
@Cartier_specialist5 жыл бұрын
Dang, I smell Orbeez and I live in Oklahoma City!!
@Bigidge5 жыл бұрын
I love watching these engine swap videos. I like all of your other videos too!
@realamberghini5 жыл бұрын
Engine transport system 😂
@matixsgarage1355 жыл бұрын
Amberghini are you his gf
@realamberghini5 жыл бұрын
Matix's Garage something like that.
@andy-in-indy5 жыл бұрын
That board is impressive.
@justinsweeney26295 жыл бұрын
He is a VERY lucky guy. Finding someone who is that supportive and tolerant (and beautiful), is hard to do being a gearhead. Most girls have little to no interest in wrenching on cars. I wish more did. Total keeper status lol
@drippingwax5 жыл бұрын
You weren't in the video! Downvote! Unsubscribe! Whining on Facebook!
@John-Anderson5 жыл бұрын
Why didnt you put the veloster n turbo engine in it with 275 hp there actually pretty quick
@kevinshea47765 жыл бұрын
So rethinking the Orbeez episode, killing the starter motor and residue in the exhaust catalyst contamination of O2 Sensors...would you do it again on the next blown engine?
@Gabe-ABNCW35 жыл бұрын
Kevin Shea:😈😈😈😈😈
@davewoods3612 жыл бұрын
Where did you get the motor ?
@DiamondXD5 жыл бұрын
So I have a 2012 Hyundai Veloster and my motor blown up today and I was wondering if I could buy the turbo motor and would it just bolt right on? Or would I have any issues? So basically since it blew up, I wanna swap the transmission to a manual and swap the motor to the turbo one, is that possible? Please let me know thank you!
@WatchJRGo5 жыл бұрын
I know you have to change to the turbo car ECU and wiring harness at a minimum. I asked the same questions and the Veloster guys think it bolts up but I don't think anyone has ever done it before. 🍻
@palletwizard5 жыл бұрын
John Ross!!! Let me at that pallet when you are done bro!
@Gabe-ABNCW35 жыл бұрын
Pallet Wizard: Sorry, this one is gone. Perhaps next time?
@palletwizard5 жыл бұрын
@@Gabe-ABNCW3 Sounds awesome! Thanks for letting me know bro! Great work on the swap!
@palletwizard5 жыл бұрын
Added your channel also!
@dave116865 жыл бұрын
Great as always!
@foxyloon5 жыл бұрын
You might be in the market for a new catalytic, judging by the amount of smoke. Kinda had a feeling those orbies would bite ya sooner or later on this car!
@Gabe-ABNCW35 жыл бұрын
Sir Raven: The car is perfectly fine!😁👍🏼
@foxyloon5 жыл бұрын
@@Gabe-ABNCW3 I'm hoping that's the case. Ideally, that stuff would burn off, since cats reach over 1200 degrees for operating temp.
@Gabe-ABNCW35 жыл бұрын
Sir Raven: Yup. We were monitoring OBDII throughout the “break in” drive. 😉🍻
@ek1414_5 жыл бұрын
Air conditioned garage! 👍🏻👍🏻
@jay-uo2bi4 жыл бұрын
It's called the previous owner taking poor care of the car.
@paulkane23915 жыл бұрын
We need a Orbeez vs Seafoam smoke contest.
@Gabe-ABNCW35 жыл бұрын
Paul Kane: LOL! Yeah... not sure sea foam would be up to task for this one!😂🤣
@lunisce5 жыл бұрын
They probably make it easy to swap the engine since they fail so often
@DarthMasiah3 жыл бұрын
😁
@jeffringer5305 жыл бұрын
Glad it started smoking. Looks like that garage door may not have been opened otherwise.
@Beary985 жыл бұрын
That boosted board though....
@ShinyRedGrapple5 жыл бұрын
Haven't watched the video yet, but I bet that catalytic converter(s) is/are toast from those Orbees. If not today, soon.
@ShinyRedGrapple5 жыл бұрын
@Stephen Clark It goes out of the exhaust valves into the exhaust, catalytic converters are in the exhaust system..
@paulcopeland90355 жыл бұрын
@Stephen Clark ...You need them in Colorado. Every two years is "emissions test" time. Pass or no registration.
@ShinyRedGrapple5 жыл бұрын
@Stephen Clark Catalytic converter performance is measured by the OBD system, via the O2 sensors. If it fails it will set off the MIL, probably code P0420. In other words, the check engine light will come on. If so he can try to run some sort of cleaner through there, but most likely he will have to have his catalytic converter, (or converters if it has multiple- and they failed), replaced. Expensive repair indeed. Unless he can find someone dumb enough buy it like that..
@Gabe-ABNCW35 жыл бұрын
Vince: OBDII was monitored throughout test drive. Smoke stopped soon after we began and the cat maintained optimal temps.
@ShinyRedGrapple5 жыл бұрын
@@Gabe-ABNCW3 Cool, then it should be fine for a long time. At worst maybe shaved a few years off the cat's life... or not, depending on if that Orbees stuff is considered smoking, or just vaping lol. This was a great video. Satisfying to see a major repair done so quickly. PS I didn't like you at first, but you grew on me, Gabe. Especially since you served in our military. Thank you for that. See you in future videos.
@qualityrenov5 жыл бұрын
would the orbeez not affect the catalytic converter?
@willfixthingsfordonuts4 жыл бұрын
And he's got a TBSS (Me Too) hence the need for the awesome garage
@modernvisionscc5 жыл бұрын
I'm still curious if a 2.0T from the Sonata will fit?
@teamallyracing17805 жыл бұрын
That's a nice garage
@Gabe-ABNCW35 жыл бұрын
Team Ally Racing : Yeah... we’re all jealous of it.
@thelightskinliberian8853 жыл бұрын
amazing . i love hyundai .
@panteleon15 жыл бұрын
you need to change the catalytic converter its probably trash
@StikaStow4 жыл бұрын
hey guys i have a 2013 veloster 1.6 gdi executive, can i add a turbo or do i need to do an engine swap
@keimtyler3605 жыл бұрын
Man Ive wanted to get a boosted for a while but can quite justify the price, you might have just done it, honestly you need an Amazon affiliate link.......
@WatchJRGo5 жыл бұрын
Your wish is my command! (If enough people buy them I could upgrade) amzn.to/2JsmM1w
@hpelisr5 жыл бұрын
you might have a bad cat. after all those orbez?
@mikespikeey46255 жыл бұрын
THE BEST BIT WAS SEEING WHAT YOU DID TO THE OLD ENGINE WAIT YOU DID SHOW IT ,,
@drippingwax5 жыл бұрын
Your caps lock is on.
@davidyaroch66225 жыл бұрын
Would it have been easier to pull the DCT with the motor and join them on the pallet?
@Gabe-ABNCW35 жыл бұрын
david yaroch: In theory, yes. In reality, no. IOT remove the DCT, we also would need to remove the CV axle assemblies and related shifting hardware, brackets, etc. This really just adds more work to a job that is relatively simple. This engine really was a piece of cake to remove and reinstall and I am confident that we can now accomplish this entire process in under two hours. Thank you for your comment!😉👍🏼
@COV- Жыл бұрын
@@Gabe-ABNCW3im doing this with my 2014 turbo veloster. Would i need to take the turbo off and everything? Does it need to be in park or neutral to swap the motor? Any advice on lining up the pilot bearing
@gutsngorrrr5 жыл бұрын
There is no way the cat will ever recover after all the orbeezs.
@CarswithNash5 жыл бұрын
Well done! I assume the smoke cleared up?
@WatchJRGo5 жыл бұрын
Oh yeah, cat temp hovered around 2000*F for about 10 minutest, then it dropped back to 1000*F and the smoke was gone. 🤙
@COV- Жыл бұрын
Is it just as easy to swap a turbo motor. Im getting a new motor monday, and plan on doing it next weekend
@slocavky5 жыл бұрын
Wonder if you clogged the cats with the orbies
@michaelmackaman68575 жыл бұрын
Not that it didn't come out super easy, but that chain shrank a bunch!
@Gabe-ABNCW35 жыл бұрын
Michael Mackaman: yup. We had to modify it a bit.
@billymasoner37355 жыл бұрын
My friend is currently replacing the engine AND transmission on his 13 Veloster. Tranny went bad specifically BECAUSE that dual clutch tranny isn’t good for high traffic areas and Hyundai knew it was an issue. Engine because of bad lifters.
@chico10145 жыл бұрын
Really should change the Cat because a plugged cat can damage that new engine